Bt infinity FTTC date changed 4 times what now?

Hi all my original date for my denton burn exchange cabinet 12 infinity was June 2013, then sept 2013 then December 2013 now says march 2014 I mean what is going on here is it ever going to be done?
Anyone had similar situation and if so how many changes before you actually got it?
Adsl checker says march 2014 and bt infinity website says btw December 2013 and March 2014.
I have sent an email to gea or whatever they are called so I will wait for there answer but in meantime your responses on how it went for you would be really handy to know before I get excited about March 2014 now

DoubleHate wrote:
Hi Jay,
My line is on the same exchange and cabinet, they installed the new roadside cabinet on Redewater Road a few weeks back. Openreach generally will install approx 8 roadside cabinets before making the available to ISPs give infinity to customers. I've counted 4 installed cabinets so far, and knowing how BT work (or in this case not work) you'll probably get it by the end of Jan.
The things that p*sses me off the most is that they moved the June 2013 deadline because Newcastle council won a government grant for BDUK, and BT decided to move the date because it wanted some of that money. (Greedy f*ckers).
Denton Burn is the last exchange in Newcastle to be updated to 21CN and infinity, BT are a disgrace. I'm waiting for the Three network to bring 4G in our areas (we'll have excellent reception) and the first thing I will do is cancel my phone line and broadband connection.
It's nearly 2014 and BT started rolling this out in Jan 2010.
If you just want faster Internet for downloading then the Three One plan will be great, but if you do a lot of online gaming then stick to infinity and pay through the nose to BT.
Rage over....
All the best.
Perhaps your rage is misdirected.
BDUK funding would be for your exchange to be upgraded rather than be missed out in the commercial roll-out. Openreach would not have moved the date "because it wanted some of that money" as the funding was for the exchange to be upgraded.
There are of course many other reasons why a deployment could be delayed none of which would be the fault of Openreach.

Similar Messages

Delivery date changed 4 times-called to ask what is going on and then best buy cancelled order

I ordered a 55 inch aquos with free ROKU stick for $599.00 on Sept. 22 (removed per forum guidlelines) and got a confirmed delivery of Sept. 26. Unfortunately, I received a call in the morning of the Sept. 26 and was told that delivery was pushed to Tues, Sept. 30.
On Monday, Sept. 29, I received an automated call informing me that the Tv will be delivered on Sept. 30 between 3:30 and 5:30. and I also received an email with the same information. Thirty minutes later I received another email stating that the delivery is again being pushed to Oct. 13. so I called customer service. I was told he can change the delivery date to Oct. 3 but call in the morning to confirm availability with warehouse.I called customer service on Sept. 30 to confirm availability and was assured that the Tv will be delivered on Oct. 3.
On Thursday Oct. 2nd, I received another email stating the order will not be delivered until Oct. 16. I remained calm and called customer service and after a very long hold time I was able to speak with a representative and again after a long hold to check what is going on, she informed me that the order is now cancelled since the item is discontinued. I told the representative that I already lost 3 days of work due to the delivery dates changing and since the TV has to be accepted by somebody 18 years or older I needed to be home. I asked if it is unreasonable to ask for the same exact TV but 1 size bigger since the 60 inch is available and in stock (but without the ROKU stick) but unfortunately I was told it is not possible. I asked to speak with a supervisor but they are all busy but she asked for my phone number so they can call me back in 20 min.. I waited but did not get a back from the supervisor the same day.
I called again today, Friday, Oct. 3 and I was assisted by a nice lady who after explaining my situation was sincere with her apology. She told me that she will call me back so she can speak with a supervisor about my situation. I asked her too if it is unreasonable to ask for the same exact TV but next size bigger since the one I was sold is no longer available and I lost 3 days of work due to the 3 changes in delivery dates. She affirmed that it is fair but have no authority to make decissions but will relay the history of the order to her superior so they can make a proper resolution.
After about 15 minutes I got a call back and was told that since the bigger TV is priced at 799.00 they will give me a 50.00 dsicount for the trouble. I declined the offer since I feel that $50.00 dollars for getting the run around and missing 3 days of work is not proper compensation and is an insult to any customer. I thanked her for trying and informed her that I am aware that it is not her fault and it is management who made this decission.
I sincerely feel that I should have been given the next size TV for the same price of my original purchase and I should have been given a ROKU stick (which I did not ask for) for my unpleasant experience.
We are $150.00 apart from getting a resolution but management feels like it is the right thing to do for cases like these. Being a best buy customer for many years, spending many thousand of dollars, I am puzzled why best buy would treat any customer the way they treated me. Please explain the policy so I can have a better understanding. The $150.00 difference can easily be recopued from my next purchase. In my opinion, it is not a very smart business practice to lose a customer this way. Again, please explain the policy to me so I can understand better.

Hello romcarlos1,
While unforeseen complications can cause unexpected delays, it seems something went wrong at every turn. Misinformation and multiple missed appointments would frustrate me too, and I can only imagine this frustration turned into aggravation with the poor service you describe. After pulling up your account, I noticed that has been two weeks since your TV purchase, and I’m sorry for any inconvenience this may have caused. I appreciate you allowing me the opportunity to explain what should have happened.
When your delivery day arrives, you should receive a call from us to narrow down the time frame to a 4-hour window. This is done because our delivery agent’s schedule isn’t fully determined until the day of service as our customer’s needs may change prior to the delivery date. These routes are then best optimized to fit the appointments scheduled for the day. The particular television you wished to purchase is quite popular, however, and due to high demand, it’s currently on backorder in some areas of the country. This may explain why your delivery date was continuously pushed back unexpectedly, and why we needed to reschedule multiple times.
While in backordered status, however, an online order may be cancelled if you don’t wish to wait any longer and a different model may be purchase. Upon review of your order, I noticed that it was canceled upon your request. If you have since changed your mind and wish to wait for one to arrive, you may place a new order here.
It sounds like you wish to purchase a new TV entirely though, so I understand if you don’t wish to attempt a new order. While I cannot guarantee you a different outcome than the resolution already offered, I’d be glad to look into your case to see what other options may be available. Please know I have sent you a private message to collect further information from you. You may view this by logging into the forum and clicking on the envelope in the upper right-hand corner of the page.
Respectfully,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

HT1459 After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time.What now?

After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time also there would be duplicate songs in the same folders.What now?

Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0

How do I stop the date changing every time I edit a photo?

I have recently scanned a number of photos from negatives, and assigned a date to them in the organiser. If I subsequently go in and re-edit a photograph, the date reverts to the date of this modification and I lose the date I originally assigned. I have tried unchecking the box Use Date File was Last Modified if no EXIF Date Found, but to no effect. Curiously, this only happens to photos where the day of the month is unknown - so a photo I have dated 4/6/1972 remains unchanged, but a photo dated 6/1972 reverts to the date of the latest modification. How do I get Elements to leave the date I have assigned to the photo? Thanks.

[Oops, hit send too early.]
David,
This appears to be another instance of a known bug in the last several versions of PSE. When you invoke the Editor or the Edit > Update Thumbnails command, PSE rereads the date/time from the file's metadata back into the catalog (who knows why it does that). Normally, when you invoke Edit > Adjust Date And Time, PSE immeditely writes the date/time into the file's metadata; so when you then invoke the Editor, it doesn't matter that PSE rereads the date/time from the metadata back into the catalog. But if the Edit > Adjust Date And Time command fails to write the date/time into the metadata for some reason, then when you invoke the Editor, PSE will overwrite the date/time in the catalog with the old date/time from the metadata -- precisely what you're observing.
There are several reasons why the Adjust Date And Time command can silently fail to write the date/time to the metadata:
- PSE doesn't understand the file type or the file type doesn't support metadata (BMP, PDF, Quicktime, PNG).
- The file is marked readonly.
- A bug in PSE's metadata handling prevents it from writing the date/time. PSE has many bugs in its metadata handling.
I'm guessing that it's the last reason that you're encountering.
Suggestion: Upload one of the problem photos to www.pixentral.com (free) and post the URL here. I'll take a look at it and see if I can reproduce the problem in my PSE.

HT1926 I tried to Download iTunes and in 'Starting services' message appears ......failed to start. Verify that you have sufficient privileges to start system services. I tried Retry and Ignore - nil. Ihave tried 4 times What now?

I tried to update iTunes and failed, so I uninstalled.
It will not now install. After trying 3-4 times, I get a message in 'Starting Services. - Service Apple Mobile services failed to start. Verify that you have sufficient privileges to start system services. Pressing Retry and Ignore does nothing!
What do I do?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

How to view "Log data changes" - TC?

Hello SDN-Community,
i have activated the flag "Log data changes" in se13. Now i want to view the data changes, made in this table.
1. I know there is a transaction to view those changes, only i can't remember.... I trust somebody else does!?
2. Do i have to activate the flag "Change document" in all data elements of the corresponding table (se12/Further characteristics/Change document)??
Please help! Answer(s) will be rewarded....
Thanks!
Gunther

Log data changes
The logging flag defines whether changes to the data records of a table should be logged. If logging is activated, every change (with UPDATE, DELETE) to an existing data record by a user or an application program is recorded in a log table in the database.
Note: Activating logging slows down accesses that change the table. First of all, a record must be written in the log table for each change. Secondly, many users access this log table in parallel. This could cause lock situations even though the users are working with different application tables.
Logging only takes place if parameter rec/client in the system profile is set correctly. Setting the flag on its own does not cause the table changes to be logged.
The existing logs can be displayed with Transaction Table history (SCU3).

HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ?

RE: Time and Date Changed by itself

The date and time will change to the wrong one automatically especially after the batt died. This repeated itself regardless on how many times i readjust the time and date to the right one. Someone please help me.

I had the same problem today. I also have the iPod 4g, no problems up until today. First make sure you calender is set to "Gregorian, you can do this by going to Settings --> General --> International, and you will see the calender options, mark Gregorian. Still didn't work? Try this: I experimented a little, and what i did was: First, I went to Settings --> General --> Date and Time --> Set Date & Time (before doing this make sure you're in the correct time zone) and here you can change the time and date. But, if it changes automatically, go to the date, and you may have the same problem here, but here's what i did. I couldn't change the month, or day, but i could change the year. Change the year to 2011, and then all the other options should come up. Hope this helped!

WTH Time & Date Changed On It's Own!!!

So yesterday afternoon my Z30 tripped out and set the time and date to 10:28am 2/21/2014. It was 4/232014 and about 2:45pm.
I did not have it set to sync the time and date automatically in the settings. I did however go and set it so it would go back to the real time and date but it did not change the time and date to what it was supposed to be.
Then I started getting alerts about how my SSL certificates were messed up for my email accounts (three total).
I set the proper time and date, then shut the phone off and turned it back on.
Then my work account started loading up close to 1000 old messages (I had it set to only sync the last 30 days) and it was loading up into February.
So I deleted that account and reloaded it.
Why would this happen?
I had an older BB since 2008, ran it for eight years and then another two and it never did this, had an iPhone for a year plus and it never did this.
Should I expect this to happen every few months (bought the phone new mid February 2014)?
Great phone, but this kind of stuff is strange, somewhat disconcerting and simply should not happen.

I only point ot the certificate based on your other information posted, could be purely coincidental, perahps not.
JimmyJ111 wrote:
In settings "set date and time automatically" was "off".
On the same screen, at Auto Update TimeZone, that was set to OFF as well?
Both settings were off?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SCEP date range reports change over time

Not really sure how to title this, but here is the scenario. I have altered a canned report to run the first Monday of every month and dump a Word file w/links into a folder. The alteration of this report is simply changing the end date to be -30 from today.
So I am getting a 30 day report of all computers that were infected. The report runs and looks to be accurate based on alerting I have setup. The problem comes when I take this report and start to drill down into the data using the links in the report. Let's
say my report shows a virus name with an infection count of 3. I can click on 3 and see a list of PCs that were infected....well not so much. If between the time the PC was infected and the time I look at the report, any of the 3 PCs were cleaned of the infection,
then they will not show up in the drilldown. So if a single PC was cleaned...the count still shows 3, but clicking on 3 only shows 2 computers now. This pretty much goes for any data on the main page.
So essentially the report is pretty useless to go back in time and see detailed info on the incidents since the status of every bit of info in that report has changed over time. I am not a SQL person, but I did have one of SQL team look at the database and
she can't see anywhere that she can pull archived data from. Any idea what direction I can point her in to get the type of reports I am looking for?

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

[solved] Changing date but not time

Hello,
I already searched the web but all examples how to change date involved changing time as well.
date -s "7 April 2008 20:42:45"
date -s "7 April 2008 20:42:45"
I need a script that does the follow.
1. Save the current date
2. Change the date to a defined one (but not the time because that conflicts with NTP)
3. Start a program
4. Wait for the program to be closed to restore the original date saved in 1.
How would you write such a script in Bash without changing the time?
Last edited by orschiro (2013-04-07 21:22:52)

Thanks for your replies. I did not know that time and date are inevitably connected to each other and that changing date does always mean changing time as well.
@Trilby,
I indeed want to circumvent a trial-period. I am working on a Linux compatibility version of Prezi Desktop which is no longer provided in an official version. Many people contacted me with issues they are facing that I cannot testify as I do not have a 'Pro' account for which one has to pay. I generally pay for software but in this special case I do not want to pay for an account realising that in fact I cannot use the software due to compatibility issues.
As such, I already tried libfaketime but I failed to get it working with Adobe AIR 32bit on my 64bit system. I am aware that I am doing something that I ought not to do but I am not willed to pay for broken software.
@moetunes
[orschiro@thinkpad ~]$ date -s '7 April 2008'
date: cannot set date: Operation not permitted
Mo 7. Apr 00:00:00 CEST 2008
You see, date -s would reset the time to 00:00 which is not what I was looking for. I want to save my current time to restore it again after closing the program.

On an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?

on an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?
I belive that the trigger is being changed on the io board, but cannot manage to reset it.
The reset process takes in the order of 0.1 sec, and since this is a time critical application, i want to get the scanning function working again faster

Dear Ian. Thank you for your reply. The problem appears to be that the scan trigger(s) are stopped, or something, by the use of the AI_setup instruction. The sytstem works perfectly until this instruction is used. My problem is in understanding what has happened since the help seems to give no detail on any interconnection between the scan system and the external analog trigger system. I have tried to reconnect the triggers, but so far unsucessfuly

"Modified date" changing on messages for what seems to be no reason. Very strange.

I have been working on an autoarchive issue with Outlook 2010 for a few days. I found out that by selecting a message and pressing ALT+Enter you can see the modified date, sent and received dates, etc for the message. I know if you move a message
or reply to a message it will change the "modified date" for that message.
However, what is happening to me is when I look at a message it updates the "modified date". This is crazy! I didn't know that looking at a message changed the modified date. If this is the case how are you supposed to check the modified
date because when you check it it changes it to the current date and time. Again, crazy. Can someone shed some light on this for me? thanks

Hi,
You mean that when you view the message, the modified date change to the
current date and time? Based on my research, Editing, replying, or copying an Outlook item can change the last modified date.
So as this issue, start Outlook in safe mode to check the issue:
http://office.microsoft.com/en-us/excel-help/work-with-office-safe-modes-HP010354300.aspx
If the issue still occur in safe mode, then run Windows in clean boot mode - this will exclude 3rd-party services when starting Windows - for a period of time, and check if this behavior will
still occur.
http://support.microsoft.com/kb/929135
Jaynet Zhang
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.

Time Date change

I have tried to change the time & date on my 6500a officejet printer...
I have used the EWS web page..when I do attempt to change either
date or time I get an error...
What Am I missing
Thanks in advance

Dear Customer,
Please follow these steps to set the date and time from the control panel.
1. Press Setup .
2. Use the right arrow button ( ) to highlight Tools , and then press the OK button.
3. Select Date and Time from the Tools menu and then press the OK button.
4. Enter the month, day, and year by pressing the appropriate numbers on the keypad.
After the date is entered, the Enter Time screen displays.
5. Enter the hours and minutes by pressing the appropriate numbers on the keypad.
After the time is entered, the Tools menu displays.
6. Press the Back button to return to the main menu.
Please revert for any clarification
Regards,
K N R K

Is there a way to change the time of a saved data to be as the same as the time-axis of the waveform graph?

Hi,
I've a problem while saving the waveform to a spreadsheet.
The problem that I'm facing is that I'm not able to save/change the time-axis of the waveform graph into the excel spreadsheet.
The attachments below are what I've programmed on.
1st file that would be asked to save is the results of the waveform.
2nd file, supposing to be the time-axis
3rd file, is the multiplication of results of CH 1 and CH 2.
Would be glad if someone can enlighten me with a solution which is suitable for LabView version 8.2 and Tektronix DPO 72004.
Thanks. ((((:
Attachments:
Modification of 2 CH waveforms (Multiply and Sum).vi ‏63 KB
Modification of 2 CH waveforms (Multiply and Sum) Front Panel.JPG ‏220 KB
Modification of 2 CH waveforms (Multiply and Sum) BD.JPG ‏92 KB

I've saved it as text file which could be read if I open it with excel spreadsheet.
My aim is to get the time-axis (x-axis) in the file rather than to get the date and time in the file.
The attachment is the waveform results that I've obtained.
Attachments:
waveform vaule.txt ‏433 KB

Bt infinity FTTC date changed 4 times what now?

Similar Messages

Maybe you are looking for