BT Infinity installation in the loft

Hi,
I am thinking of getting BT infinity but before I do I need to make sure the BT engineer can install it. Currently our BT line goes in the attic and we have a panasonic extension phone system where all our telephone sockets are connected internally. Can BT install the infinity and we can have a router in our lounge downstairs if the main bt socket is in the attic. If so, would the installation include this so that we have a connection. I do not want a router upstairs in the attic.
Thanks

Yes you can, mine works the same way it comes of the pole into the loft and then a divider takes it to the house, am I write on that?. If so, yes they will install a main socket up the loft for your telephone then run a data extension kit of that socket down to whatever room you want then connect Infinity to that socket,then into your HH5!. But yes you should be OK!. Also I will add that way of setting up Infinity you can benefit with speeds becuase you are missing all the bad wiring through your house to the master socket and basically you are going straight from the main pole into your room so its a better setup altogether.
Please click on pink star to the left and say thanks if I have helped you at all!. Thank you. Home Hub Page- http://bthomehub.home/
BT Speed test- http://www.speedtest.btwholesale.com/
Speedtest:-http://diagnostics.bt.com/login/?workflow=Speed
Net Connect test- http://netalyzr.icsi.berkeley.edu/index.html

Similar Messages

  • BT infinity installation - half the speed of the e...

    After a long, long wait I was very pleased to see that Infinity was finally available in my area (from about 2 weeks ago), so I ordered it pretty much the moment I had a chance to do so. The estimate from BT's availability checker for FTTC was up to 51.7mbps down and up to 13.2 mbps up - somewhat better than I was getting on ADSL (<2mbps down and 200kbps up..).
    On the day of the installation we requested that the modem & router be placed in our study, as the master socket is in the hallway and has no power nearby (we had previously run everything from an extension socket in the study). The contractor (not a BT engineer) decided that the current wiring was suitable, and so didn't make any changes to the master socket or to our internal wiring - pretty much just plugged things in and was on his way again, telling us that our speed should be stable within 10 days or so.
    It's now been a week since the installation, and we are still achieving less than half of what BT's estimate suggested we should be getting.
    BT speed tester diagnostics:
    Download Speed
    22.72 Mbps
    0 Mbps
    23.52 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 22.72 Mbps
     For your connection, the acceptable range of speedsis 16 Mbps-23.52 Mbps .
     Additional Information:
     IP Profile for your line is - 23.52 Mbps
    2. Upstream Test: -provides background information.
    Upload Speed
    8.23 Mbps
    0 Mbps
    20 Mbps
    Max Achievable Speed
    Upload speed achieved during the test was - 8.23Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 20 Mbps
    This is on an ethernet connection, not wireless.
    Is there anything that we could try to increase the download speed, or is our line likely just awful? Don't get me wrong, I'm very pleased to be receiving 10 times what I was on ADSL, but I was hoping for more.
    Solved!
    Go to Solution.

    Sorry, popped out for dinner and get my new phone.
    You will need to contact the moderators, they will take personal ownership over your case until resolved.
    You can contact them here, they will take 3 working days to respond.
    Please keep us updated, also when they send the engineer out. Make sure you request a DLM reset of your line!
    If this helped you please click the Star beside my name.
    If this answered your question please click "Mark as Accepted Solution" below.

  • BT Infinity Installation Queries

    Hi All
    I'm considering purchasing either BT Infinity (most likely) or talktalk's FTTC offering, but had some questions about the in-home installation procedure.
    As I understand it, an Openreach engineer will pay a visit regardless of ISP to:
    a) Install a new BT master socket
    b) If neccesary install an 'Infinity Extension Cable'
    Firstly, question regarding a. The house is owned by my parents and some time ago my dad moved the master socket into the loft for the sake of neatness-is that going to be an issue when the Openreach engineer turns up, i.e. is he going to refuse to work on the unit and/or will there be legal implications (according to many posts on various sites the latter is now an urban myth and BT really don't care) If they do refuse, is he likely to leave the box for me to do it myself?
    Secondly, re the extension kit, can someone describe it to me? I assume it's just an RJ11 plug to plug cable to run from the filtered port on the master socket to the location of the modem, and have heard it's a bit of CAT5 cable-is that all correct?
    This might cause an issue-my Dad won't allow any cables to be run externally around skirting or coving, so will probably have to run from master socket in the loft to wherever the modem/HH will be sat via the conduits already in use by phone cables/power sockets. Depending on thickness of cable this could be tricky-a bit of CAT5 cable would probably fit but even an RJ11 plug might be tight.
    Will the Openreach chap help if it becomes that involved, and will be know how to cut and re-crimp the cable if the connectors need to come off? Same question as with the master socket if he can't/won't get involved-will he leave the cable, I imagine I can probably find instructions somewhere on the net to re-crimp it. If he can't leave the cable, can I knock one up myself with a bit of CAT5 and some RJ11 connectors?
    Many Thanks
    Rob

    The Openreach modem will have to be located up in the loft, unless the OR engineer moves the master socket to the downstairs, but either way a wire is going to be needed to run from the loft.  
    The engineer will fit a socket like this: 
    and as for the data extension kit, its basically a Cat5e (Ethernet cable) that will be run up to 30metres, and with a reasonable job for the engineer, they won't go all out of their way.  As the OR modem has to be located near the master socket to achieve the full speed. 
    As for the crimping business Im not to sure myself.
    Regards Edd
    Check your Line
    BT Speedtester

  • Phone not working after infinity installation

    I have just moved my phone and broadband from Sky to Bt and the engineer called this morning to complete the installation. I have 2 phone sockets. When I had broadband originally installed it was before the days of filters so it required a BT engineer visit. As my computer was upstairs the engineer 'back wired' the sockets (apologies if I have the terminology wrong) so the adsl faceplate was fitted to the upstairs wired extension. Today, the Openreach engineer was initially puzzled but said he would be able to install the Infinity faceplate on the upstairs extension as originally fitted. He checked the line was ok, checked the broadband connection and put the faceplate back on the 2 sockets. After he left I tried to make a call via the downstairs socket without success and I assumed that the phone line had not yet been changed back to BT. This afternoon I received an email from BT advising that my phone was now active but the downstairs socket will not work. I am able to make and receive calls on the upstairs extension. I have just spent 40 minutes on the phone to BT, explaining the problem to 4 different people. Each BT employee advised that it would cost £130 for an engineer to revisit my house to correct the fault that they had somehow caused! To say I'm frustrated is an understatement. Has anyone any suggestions how I can resolve the problem. All 4 BT employees did not really understand the problem. I would appreciate any help.
    Solved!
    Go to Solution.

    You cannot use a phone connection for broadband when on Infinity. The only connection that can be used is that which comes from the home hub 3, which is near the Openreach modem.
    You have to use wireless, run an Ethernet cable, or use Powerline adapters.
    You phone should work if it is plugged into the botton socket of the new Infinity master socket.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Queries in advance of Infinity installation tomorr...

    Received BT Home Hub 3 today for Infinity installation tomorrow (expected) and posing queries in advance:-
    1)      What is on the BT Infinity CD?
    2)      Are all the current modems being supplied by BT the same or are there variations?
    3)      Will micro filters still be needed around the house?
    4)      What is the Wireless pin number used for?
    5)      What is the Admin password used for?

    wunay wrote:
    Received BT Home Hub 3 today for Infinity installation tomorrow (expected) and posing queries in advance:-
    1)      What is on the BT Infinity CD?
    It has a lot of rubbish to slow down your broadband connection/pc.
    2)      Are all the current modems being supplied by BT the same or are there variations?
    They're are two modems that they use which are HG612 and ECI, the one given to you will normally match the manufacturer of the cabinet. There is a 3rd but can't remember what it's called and it's hardly used anyway I believe...
    3)      Will micro filters still be needed around the house?
    No, he will install a filter on to your master socket.
    4)      What is the Wireless pin number used for?
    Not sure, never needed it as of yet.
    5)      What is the Admin password used for?
    Used to access your HomeHub settings, which you can see here.
    If this helped you please click the Star beside my name.
    If this answered your question please click "Mark as Accepted Solution" below.

  • Awful service from infinity installation engineer

    We had our BT Infinity installation engineer visit today and are trully shocked and disgusted with the experience.
    I was working so my wife took the day off work for the engineer visit.
    The engineer was a SUB CONTRACTOR as we found out to our dismay.  Not only was he obnoxious and downright rude to my wife throughout his rushed 40 minute visit he failed to do what he was supposed to be there for.
    I got home from work to find ;
    1.  my wife so upset at how she'd been spoken to she was nearly in tears.
    2.  the television unit left in the middle of the living room with loose wires everywhere.
    3.  my BT vision not connected to the internet (on inspection the engineer hadnt even plugged it into my hub)
    4.  my BT infinity router setup right next to living room radiator a direct heat source! (refused to place it anywhere else, refused to discuss more appropiate locations as he 'didnt have the time for this'
    5.  no devices set up to our new connection and he would not even try as he 'wasnt good with computers' (despite BT clearly stating that the engineer will conect your main computer to the new connection)
    I then had to sort the whole mess out myself, even though im charged £25 for the engineer who was supposed to do it all!
    I have phoned BT customer services who promise me this has been 'escalated' as a complaint and someone will be in touch within 24 hours.

    @Stilll40
    'Do you recommend that I get in touch with BT to ask if I will be sent an "independant contractor" or a BT engineer?'
    BT won't know if its a Contractor who is sent. Also it won't be a BT Engineer as they don't install FTTC/P services. It will either be an Openreach Engineer or someone from Kellys Communications or MJ Quinns.
    Jobs aren't issued to Engineers until the morning of the appointment day so the only way to know if it is someone from Kellys, MJ Quinns or Openreach is to wait for them to arrive at your house.
    Thing you have to remember about MJ Quinns and Kellys is their Engineers get paid per job they do, not a salary. Therefore they don't have time to go running 20 to 30 metre data extension cables round your house. Usually with them you either have it at the current NTE location or lump it.

  • BT Infinity Installation Issue

    Hello
    Im a new BT customer, and I had my BT appointment for installation last Friday (16th May) to install Phone and Infinity.  When the Kelly engineer arrived, he said the line had a fault on it, and that Infinity wouldnt "sync" or something like that, and that my line would need new pairs?   So he said he couldnt do that only an openreach engineer could.  So he would have to raise it with openreach, and another appointment would be required.
    I have since received my appointment (2nd June),  which is totally unacceptable,  as I need access to the internet as I work from home a lot( or at least I did!!).   I have tried contacting customer services, and being passed around from pilar to post...eventually I got through to some who I thought was helping....only for them to state that there are no earlier appointments, and that I would have to wait.
    As you can imagine, my first experience of BT is not a good one....and perhaps I am remembering the reason I left in the first place.....terrible customer service!
    In addition the Kelly engineer said he would switch me back to Sky....which he obviously didnt, as my number and service is ceased with Sky.  Not a good experience.
    Dean

    it says...
    Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date  High Low High Low    
    FTTC Range A (Clean)
    32.8
    23.8
    7.5
    5.9
    Available
    FTTC Range B (Impacted)
    25.6
    13
    7.1
    3.6
    Available
    WBC ADSL 2+
    Up to 13
    7.5 to 17.5
    Available
    WBC ADSL 2+ Annex M
    Up to 13
    Up to 1
    7.5 to 17.5
    Available
    ADSL Max
    Up to 6.5
    5.5 to 8
    Available
    WBC Fixed Rate
    2
    Available
    Fixed Rate
    2
    Available
    Other Offerings
    Fibre Multicast
    Available
    Copper Multicast
    Available

  • BT Infinity Installation question

    Hi Everyone,
    I have placed my order with BT for BT Infinity to be installed on the 18th December. The sales guy was very helpfull but I am not sure he understood my current ADSL setup. I signed upto to BT Internet many many years ago when they giving out the green stingray usb modems. The main telephone socket is at the from of the house in the hallway. My office is upstairs directly above. The BT engineer ran a extension upstairs around the staircase and put a RJ11 socket on the wall in the office. This has worked very well for over 10 years. The sales guy said the BT HH5 must be plugged into the main telephone socket. I explained that was not ideal as I have my pc upstairs. I also have some powerline adapters to bring the network down into the living room to provide internet and streaming films to my consoles and sky box. He was not sure if the existing extension would be good enough for infinity. At the phone phone its a CAT5 connector that terminates to a RJ11 socket looking at the connector there is only one pair connected at the moment. I would rather the current cable was not removed as its been painted over some parts. Would it be possible for the cable to be reused by putting a new socket on at the RJ11 end. After seeing the ports on the BT HH5 that infinity uses CAT 5 connections. Would it be possible to use another pair of powerline adapters to take infinity upstairs?
    Any advice would be much appreciated.
    Ben

    Speak to the engineer when he/she arrives.  The engineer should be able to place a master socket where you want it or convert your extension to become your master socket and connect the Homehub 5 to that. If that is upstairs in your office that should not be a problem. If you want to continue using powerline adaptors, again that should not be a problem.
    If you get a contractor installer it could be that requesting the above is met with a blank stare or a "computer says no" moment. If that is the case it may be best to stop the installation and ask that an Openreach engineer is arranged to do your install because if it is not wired up correctly it will impact on your speeds.
    You might want to consider calling BT prior to the installation and suggest that they arrange an Openreach engineer for the installation.

  • BT Infinity Installation Problem

    I know I won't be the first person to post about installation woes with BT Infinity (and probably not), but here goes:
    I placed an order for a BT phone line and BT Infinity 2 at the end of July. The activation date was 13 August, and originally the BT engineer was scheduled to come to our flat for installation on that day as well. The day after I placed the order, I attempted to reschedule the installation date for 11 August, as neither my fiancee or I could be at the flat on 13 August. The online scheduling tool confirmed the new date and everything seem fine. About a week or so later, the order management page was updated to indicate that the engineer did not need to come to our flat and could complete all the work at the exchange.
    The activation date came and went, but neither the phone line or the broadband worked. On midnight 14 August, my order was updated on the order management page to reflect that the order had been cancelled. This of course made no sense. I phoned up BT's customer service line at about 09:00 on 14 August, and after speaking to a frankly quite incompetent individual, we managed after about an hour to establish that the order cancellation was BT's fault. Apparently, BT's offline team had been notified by Openreach that they could not meet the new installation date of 11 August. Instead of notifying me about this, the BT team member cancelled my order! What is worse, they did not notify me that the order had been cancelled. Instead, the order management page indicated that the order was still progressing and that the BT engineer need not visit my premises. This was completely the wrong information. Somehow, I had to wait until after my activation date to first be notified about the cancellation.
    Needless to say, I was furious. I was then told that I needed to place a new order. I rebutted this, indicating that it was BT's error and that they should correct it. Placing a new order would result in another two week delay before installation and possibly double charging. I asked to speak to the order management team member's supervisor. I was informed that he was busy and could not speak to me at that point in time. I again reiterated that this was unacceptable. The team member scheduled a callback from the supervisor for between 12:15 and 14:15.
    No-one ever called back.
    I phoned BT customer services back at about 14:20, and spoke to a very helpful individual (who I think was named Dave, but I can't be sure). He was very apologetic. He created a new, identical order with an installation and activation date of 28 August, and arranged a callback with a manager so that the order could be expedited and the activation date could be brought forward. That callback was meant to happen by 20:00 on the same day.
    No-one ever called back.
    This morning (15 August), I phoned BT customer services at about 09:30, and spoke to a somewhat rude, but still helpful individual. He arranged for the BT line to be activated within 24 hours. He also filled out a form to expedite the installation and activation of BT Infinity to next week Tuesday (19 August).
    This is where I am at the moment. I am really not sure if Openreach will approve an installation date that is so soon. And if they reject it, I am not sure if my order will be cancelled again. This has been an incredibly frustraing, time-consuming procedure (and I realise other people on this forum have had it worse). Hopefully it all works out, but I am not holding my breath. Will this post with the outcome.

    Good afternoon traveller10 and welcome to the forum.
    Unfortunately there have been other posts on this forum of a similar nature. It also appears that it is all too common for call backs not to be made. Broadband cannot be installed without a phone line (obviously) and it appears that it is normally 2 different engineers (and probably 2 different departments) one of which deals with the new phone line, and the other that installs the broadband !!!
    I have notified the moderators of your problem, and hopefully they will post an invite on this forum in order for you to contact them. They can take 2 - 3 days to reply, but they take your problem on, on a personal basis and have a VERY good record of sorting out problems such as yours......  
    If you found this post helpful, then please click the star on the left, after all, I'm only trying to help........

  • BT Infinity installation - so disappointed

    Hi 
    First post here in the hope of finding some support and guidance please.
    It's a master socket issue. Like many older houses, the master socket is located in the hallway and there are no electric plugs nearby. As I understand it, the hub and router need to be plugged into the master socket and two electrical plugs. I have a telephone extension in a room upstairs running straight off the master socket close to electrical sockets and I wanted to have the home hub and router installed there. Having read many of the posts on this forum, I rang BT to request that on the day of installation that the master socket be exchanged with the one upstairs. First of all I was told point blank that this was not possible. Not at all. Then I was put through to another area where I was told that it was possible, but at an additional fee of £193. The reason given was that another separate engineer would have to be called out on a separate day to do the work. When I mentioned that I was aware that others had had this work done as part of the installation, I was told that the engineers should not be doing that. I am so confused as to why this sometimes appears to be included as part of the installation package and sometimes not. I also don't understand why the possibility of this additonal cost to move the master socket is not made clear when placing the order - I can find no mention of it on the BT infinity order site and given that there are many older properties around this must be a common issue.
    Needless to say, I cancelled my order and will be looking elsewhere but am sad and disappointed as my family and I were looking forward to our first fibreoptic broadband service.

    Thank you John, swaber and boe for such quick and helpful replies, very much appreciated. So it seems that there are a number of possbile options, all available on the day of the installation and all available as part of the standard installation process at no additional cost. 
    Does anyone know who I can contact at BT please to take this further as surely it can't be right for there to be such a huge difference between the experiences you've all had and the kind of response I've received? It's especiallly disappointing as we're longstanding customers of BT - landline for over 30 years - so I had hoped that moving across to fibreoptic broadband would have been relatively straightforward. Sadly, it would appear not.

  • BT Infinity Installation Options

    I'm awaiting my Infinity installation and need some answers to decide on the best options for siting of modem and hub.
    I've gone to great lengths to conceal all telephone wiring in my house, so don't relish surface wiring of a data extension cable. Existing cabling consists of master socket in hall with two separate 6-wire cables to extension sockets upstairs. One of these is currently used as the Total Broadband connection point.
    Option 1 Site modem and hub by master socket & fit a wireless dongle to PC upstairs to connect to hub. Problem is only one power socket near master socket, & much domestic earache anticipated re more kit plonked in the hall.
    Option 2 Site modem in hall and hub by PC upstairs. Internal routing of the data cable would be very messy and unsightly. This could be minimised if the cable could be routed mostly outside the house, but can this be done? Is the cable sheath suitable for external use?
    Option 3 Make the telephone socket by the PC the master socket. Can this be done with only one 6-wire cable connected to it from downstairs and still retain service to phones in the other bedroom and the hall? This would be the preferred option so as to eliminate the earache.
    If Option 3 needs a new lead-in cable to bring the external service into the resited master socket, can the BT engineer provide it? If not can I install it for him to make the connections?
    Authoritative answers will be much appreciated.

    from another s todd..... but not authoratitive.
    I'm not sure what your separate 6-wire cables to extension sockets upstairs are.  If these are good quality cable that you could repurpose as an eithernet cable, then how about modem in hall and PC upstairs (like option 2), but using the existing cable to connect.
    I think a normal ethernet cable could be run outside the house without sheathing and last a good few years

  • Moving Home - Infinity Installation before Phone L...

    I called BT yesterday to arrange my house move and they helpfully arranged an engineer visit on the 18th September to do the installation. Later I received a confirmation email to say that the BT Infinity installation would be on the 18th but the Phone line engineer visit would be on the 20th! Given the current owner has Virgin I suspect the BT infinity engineer will struggle if the phone line isn't connected first.
    I phoned back and spoke to someone who seemed to suggest that it would be resolved on the 20th. When I got BT Infinity installed in my current property it took about a month and 4 engineer visits. Is there anything I can do to reduce the risk of delays beyond the 20th? My wife suggested that I cancel the order and start again from scratch.

    Unfortunately, 2 weeks after my activation date, I'm still no closer to having broadband or a phone line. The problem is that the existing line into my property has some branches of a dead tree resting on them. BT won't do anything until the branches are removed. The tree is the responsibility of my county council who have granted BT permission to cut back the tree. BT have given me 4 different dates when the tree will be cut and each day, when I get home from work, I'm disappointed to see the tree hasn't been touched.
    Luckily I was told that FTTP is dealt with by a specialised team in Dundee which I figured out I could get through to each time by refusing to enter my phone number and pretending I wanted a new phone line. Once I get through to sales, I ask them to transfer me to the FTTP team and it works quite nicely. Before I learnt this trick, I ended up talking to someone who was reading from a script and was unable to help at all. It was always best to politely terminate the call and try again for the Dundee FTTP team who don't appear to blindly follow the script and are actually able to call "the engineers" who I assume means BT Openreach. Eventually someone in Sales gave me the direct number for the Dundee team so no boring IVR menus for me anymore! This helps a lot given I need to call every time I see the tree standing there... mocking me.
    At least I'm getting lots of DIY done without the internet to distract me.
    My guess is that I'll get online in November but will be pleasantly surprised if it happens before then. Thank goodness for unlimited internet on GiffGaff.

  • Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6

    Hello
    Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6.
    I have a problem since my installation of the Yosemite update on my Mac I can more open Indesign yet I have installed JavaForOSX2014-001 but it has changed nothing someone could help me?

    Please do not post the same question multiple times. If someone can help you, they will, but you need to be patient -- we're all just volunteers, users like yourself. I'm going to delete your other posts.

  • Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059

    I just updated Window 8.0 to 8.1 for the second time as the first Time there was an UEFI issue...  the 8.1 installs and update seemed smooth... I shut down, and I leave for work. I come home fire up my PC it seems slow!! it boots...
    I notice some live tiles are active I prefer mine off so I  shut off a couple Live tiles. so then I decide to open the Mail tile and it locks up... and then one of my browsers freezes up!!! I could not open task manager at all to end the
    proses, so I decided to restart and then an app was not allowing windows to restart!!! so windows ended the task on its own could not make out what program or app it was!!! and the machine booted up slower again. I went into the event viewer
    and what do I find in there is this stuff and now looking at it this all started after the windows 8.1 update... I get it we all want the latest and greatest OS but as my mom said good things come to those whom wait don't rush into anything!!!
    and I think Microsoft you are rushing to push stuff out onto the Market... so now I have to sit here and wonder why my PC now takes 2 + minutes to load!!! (BS) and on win 8.0 it took 60 seconds... fix this please I will watch and see if
    this happens again if it keeps up I will have to once again revert back to 8.0 and at that point I will want some $$$ compensation for my loss... why should I have to go through hoops for something with the word Mircrosoft attached to it...
    I wonder how many others have had this same issue and don't even know its happening....
    1.
    Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059
    2.
    taskhostex (2888) WebCacheLocal: The shadow header page of file C:\Users\Dale\AppData\Local\Microsoft\Windows\WebCache\V01.chk was damaged.The primary header page (4096 bytes) was used instead.
    3.
    The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{362b48de-4382-11e3-be6e-3085a9a945d8}#0000000000007E00.
    4.
    Driver detected an internal error in its data structures for
    5.
    The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: e14
    Start Time: 01cf3eb70280ca6e
    Termination Time: 4294967295
    Application Path: C:\WINDOWS\syswow64\wwahost.exe
    Report Id: f7b4be2f-aaaa-11e3-8250-3085a9a945d8
    Faulting package full name: Microsoft.SkypeApp_2.0.0.5011_x86__kzf8qxf38zg5c
    Faulting package-relative application ID: App
    6.
    The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
    Process ID: 15bc
    Start Time: 01cf3eb66f89a193
    Termination Time: 15
    Application Path: C:\WINDOWS\system32\wwahost.exe
    Report Id: 0fd54265-aaaa-11e3-8250-3085a9a945d8
    Faulting package full name: microsoft.windowscommunicationsapps_17.4.9600.16384_x64__8wekyb3d8bbwe
    Faulting package-relative application ID: Microsoft.WindowsLive.Mail

    I have the something similar happening as reported in  event viewer in the warning section:
     System
      - Provider
       [ Name]  Microsoft-Windows-Security-SPP
       [ Guid]  {E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}
       [ EventSourceName]  Software Protection Platform Service
      - EventID 1058
       [ Qualifiers]  32768
       Version 0
       Level 3
       Task 0
       Opcode 0
       Keywords 0x80000000000000
      - TimeCreated
       [ SystemTime]  2014-08-13T04:35:49.000000000Z
       EventRecordID 80761
       Correlation
      - Execution
       [ ProcessID]  0
       [ ThreadID]  0
       Channel Application
       Computer Monzworks
       Security
    - EventData
       0xC004F059
    installation of the proof of purchase from the acpi table failed 0xc004f059
    My System Properties page says "Windows is activated"  and a product Id is displayed. I am on a window 8.1 core OS after applying the update successfulling from Window 8. My computer is an AsusTek Computer Inc. ,
    Asus Desktop PC CM1745 Series - 64-bit Operating System x64-based processor.
    I had trouble with AODDriver4.2.0 causing errors because the system could not find the path, It turned out to be uncleared program remnants in the registry were looking for an old version of the driver, in the wrong place , instead of the current one.  
    Oh, and I tried sfc/scannow and DISM /Online /Cleanup-Image /RestoreHealth from elevated cmd prompt and elevated powershell ise everthing was reported with no errors and with powershell, the report said windows store corruption was repaired.
    Before this I had used apps.diagcab and it said my IE 11's  temporary internet files folder was in the wrong place that it was going to put it back. Well, it messed up my IE 11 so the folder location was in the same place but it was not listed in the
    location:                 . <----- Just like this. Plus the amount of disk space available was 8mb-which messed up any sort of operations for example putting in a new search
    engine could not be completed.  I had to use a system restore.   I currently have no errors showing up but warnings yes. thankfully most are minor.This is the other event viewer report which could be related:
    - System
      - Provider
       [ Name]  Microsoft-Windows-Security-Auditing
       [ Guid]  {54849625-5478-4994-A5BA-3E3B0328C30D}
       EventID 5061
       Version 0
       Level 0
       Task 12290
       Opcode 0
       Keywords 0x8010000000000000
      - TimeCreated
       [ SystemTime]  2014-08-13T03:48:26.671362500Z
       EventRecordID 290021
       Correlation
      - Execution
       [ ProcessID]  676
       [ ThreadID]  728
       Channel Security
       Computer Monzworks
       Security
    - EventData
      SubjectUserSid S-1-5-21-4255092528-2166032690-2543152005-1002
      SubjectUserName Monz Prez
      SubjectDomainName MONZWORKS
      SubjectLogonId 0x239d9
      ProviderName Microsoft Software Key Storage Provider
      AlgorithmName UNKNOWN
      KeyName CD1CC265-0DA0-4230-8419-CB6F808FE688
      KeyType %%2500
      Operation %%2480
      ReturnCode 0x80090016
    I am tired so talk among yourselves.
    Sincerely Tired

  • Multiple BAM installations on the same machine?

    Hi guys,
    I have a customer with the following requirement:
    "We have installed BAM 10.1.3.3 with EL and upgraded to 10.1.3.4. It is currently using a remote database 10.2.0.3 in our test envt. We want to use the same Windows server for monitoring our Development enviroment also using the Dev database. Is it feasible or will it corrupt the IIS of the windows machine already running BAM 10.1.3.4. Please provide your recommendations on this, whether to have separate windows servers or we can have multiple BAM installations on same server."
    Any ideas on this?
    Thanks in advance,
    Catalin
    Oracle Support Services

    Multiple BAM 10g installations on the same box is not supported.

Maybe you are looking for