BT Infinity - IP Profile, what speed?

So, On Monday we got Infinity on the site they said the highest amount of speeds are as followed.
Download: 26.3 Maximum
Upload: 5.3 Maximum
I've excedded both of these sevral times and I'm really wondering how close I can get to my IP Profile!
Download speedachieved during the test was - 24.22 Mbps
For your connection, the acceptable range of speedsis 12 Mbps-34.42 Mbps .
Additional Information:
IP Profile for your line is - 34.42 Mbps
Upload speed achieved during the test was - 5.1Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps
I've had a few 26.7/8, when the Engineer came round they tested and recieved around 31mbps wheather that was the connection speed or not Idk.
Had an upload of around 5.6 upto 6, can i actually get any closer to my IP profile?
http://www.speedtest.net/result/2191635183.png
Thanks
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.

Just got my new PC, throughput seems to be nice.
Now getting about 30 ping instead of 50 - 60 and getting 26/27 every time. Will test with a wire soon and I'm using G technology btw, not N sorry about that!
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.

Similar Messages

Bt infinity ordered and told what speed i would re...

Last week i ordered BT Infinty, Told what speed i would recieve 56mb/s 20mb I confirmed this with my telephone number and placed an order and a date was set for an engineer to set up infinty, I cancelled my current isp gave bt my migration code, But today was sent a text by bt saying they cancelled the infinty order due to it not being in my area,
How can it not be when i was able to place an oder for it, I am really annoyed and fasturated about this as I may now have to look for another ISP and enter into another 12 month contract, I so **** off with BT

Have you spoken to them to find out?
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

Profile and Speed Reductions

Hi, sorry for my first post here to be yet another one about slow Infinity speeds but I would really welcome some help and advice. I switched to Infinity from Total Broadband 3 in early November and initial tests showed my line profile for downloads was 37 Mbps with download speeds just under that figure.
After about a month the download profile and speeds dropped to around 32 Mbps which is what the online estimator forecasted when I signed-up. Over the next few weeks the figures gradually dropped further and then appeared to settle at around 26 Mbps. By the end of December the profile and speeds dropped again to between 20 – 23 Mbps and it was at this time that I decided to upgrade to Infinity 2. This was mainly to obtain the unlimited use but I did hope that it might also help return the profile and speeds to their original figures.
I was therefore surprised to find that since Infinity 2 was activated the profile is now only 17 Mbps with download speeds of around 16 Mbps. Upload speeds have remained fairly constant throughout at between 5 - 6 Mbps
I presume there must something wrong somewhere but after trying all the recommended checks and tests I am unable to find anything. The modem is an ECI V-2FUb/I Rev.B and the homehub is an HH3 A. All speed tests have been carried out using an Ethernet wired connection. I have recycled and reset the hub but as often advised on here I have left the modem permanently on and connected.
This is the speed test result from this morning...
Can anyone maybe offer any suggestions? Many thanks.
Keith.
Solved!
Go to Solution.

Thanks for your replies.
I was always reluctant to try recycling the modem but after reading the posts I switched it off and did as suggested. I also switched off the PC and the homehub. After twenty minutes I booted the PC back up and then powered-up the modem. Finally I powered-up the homehub and after a minute or two everything connected together correctly.
Sadly, I then ran a further speedtest and found the results to be more or less the same as this morning. Thanks for trying to help me though..... I do appreciate it.
I have now contacted the mods and will wait to hear from them.
Keith.

What speed can I expect?

Hello there,
I recently brought the Infinity 2 package, which is due to be active on the 24th.
The speed is advertised upto 75mb.
What speed would I be looking at getting? I only manage 4mb with Sky and am someway from the exchange.
My friend gets 50mb and lives about a mile up the road, would I be getting there or there abouts?
I'd be delighted at anything over 20mb to be honest, but 50mb would be awesome.
The exchange i'm on is Langley Mill and I live in Heanor.
Thanks.
Grant

Then you'll have to wait and see
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

What Speed Memory for a 3.06 Ghz 24" iMac? 800 Mhz or 1.066 Ghz?

What speed memory should I have in my iMac 24" 3.06 Ghz Intel Core 2 Duo?
It seems to have come with 800 Mhz memory, but the Bus Speed is 1.07 Ghz.
Shouldn't it be able to use 1.066 Ghz memory??? Or is it not really up to 1.07 Ghz? The serial number is: QP8390YD0KM.
Thanks, Jim.

Some of the previous iMac models had bus speeds that did not match the RAM speed, by design.
You should use this OWC web store page.
http://eshop.macsales.com/shop/apple/memory/iMac
Just click on your specific iMac model and read the specs on one of the compatible RAM modules.
You can also find your iMac model here
http://www.everymac.com/systems/apple/imac/index-imac.html
and read the profile page.

How do I know if my CPU has decreased speed or what speed my cpu is running?

I recently noticed that when running PRO app my MBP seems pretty slow unusually. I have met this occasion before . I heard that when temperture is too high , the CPU will decrease its speed to protect itself. How do I know if my CPU has decreased speed or what speed my cpu is running?
Thank you!
MBP 8,2 10.6.8

Enter in the search field of Google 'CPU speed monitors' and you should get some results.
Ciao.

How do you know what speed discs to use?

I experienced a problem backing up my iTunes library and found out it might be due to the DVDs that I was using. I have a G4 iMac running 10.3.9. It has a superdrive but I am not sure how to figure out what speed disc to use. Can anyone help? My 16X DVD-Rs aren't working and apparently 16X isn't what I should be using.
Finally, if 16X aren't right where do I get slower ones? Pretty much all I have seen are 16X.
Thanks for your help!
Jenn

If you are carefull and read the packaging, you will see that some will read that they will burn at 1X-2X-4X-8X or 16X.
One that comes to mind is the Maxell 16X DVD-R
Remember that not all media DVD's offer this feature, so take your time and read the package.
Here is a good guide for quality to use as well.
http://www.digitalfaq.com/media/dvdmedia.htm
Don

What brand DVD+R do you recomend and what speed for PE11?

I do not know why some brands like Memorex work with my PE11 and others like Sony do not. I do not know what speed 8X the program can handle? What are the pros and cons of using different speeds on results?
Thanks
Rich

Rich
Thanks for the follow up.
As for
What kind of disc can I record on today and then add to it tomorrow with some additional footage?
You cannot do that with any burn to in Premiere Elements (any version).
In Premiere Elements....
1. The DVD-R allows for one burn to on the disc all at one time.
2. The DVD-RW will allow you to use the disc again after a Premiere Elements burn to to it, but it will overwrite (erase) what was burned
to the disc in the prior session. No add on.
If you are in the Elements Organizer 11 and using one of its burn to data disc opportunities (See File Menu/"Copy/Move to Removalble Disc"), you could explore the multisession possibility by enabling the preference for multisession. (See Edit Menu/Preferences/Files and the option for "Enable Multisession Burning to CD/DVD.)
I would suggest that you look into the Premiere Elements Project Archiver feature where the project file (project.prel) is saved with its source media. This might be a consideration for add on chances.
Adobe Premiere Elements 11 * Archiving projects
ATR Premiere Elements Troubleshooting: PE12: Archiving Projects With Disc Menus
A Google search reveals at least one disc manufacturer marketing a "Archival Grade Gold DVD-R" expected to last 100 years.
But, I wonder what the technology would be like in 100 years and if a player will still exist to play back DVD-VIDEO on DVD disc.
Please review and consider. If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Resetting,disabling.Clean-ups and Frag, just dosen't boot my pc any faster, any tips and what speeds it yup for accessing aother websites andtheir sites

Tried resetting,disabling,clean-ups, defrag, changing proxy to 'No Proxy' even doing a number 20 in the DOM etc just doesn't boot my PC any faster or enable me to access my own website pages/sites a recent development, just keeps Turning around without loading the dashboard, though brings up webpage like with yahoo, but takes an awful long time in the morning to get to my email,, same as when booting up from closed; any tips and what speeds it up for accessing another websites and their sites edit;; getting fed up with Firefox,, much to problematic,, any ideas who has less problematic Browser. many thanks,
N.B, My PC is a an Windows Xp, the latest

Usually slowness after one upgrade requires disabling hardware acceleration, or a possible new regression (hopefully not).
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
* Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
* In the Firefox options window click the Advanced tab, then select "General".
* In the settings list, you should find the Use hardware acceleration when available checkbox. Uncheck this checkbox.
* Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]

HUB 4. INFINITY VERSION OR WHAT ?

HAVING JUST MOVED HOUSE AND BEING ON INFINITY 2 TARIFF , I REQUESTED AN UPGRADE FROM HUB 3 TO HUB 4 INFINITY VERSION. WHAT I ACTUALLY GOT WAS THE STANDARD HUB 4 IN A REFURBISHED SWAP BOX, I WAS THEN TOLD BY INDIA THERE IS ONLY ONE VERSION OF HUB 4 DESPITE SEEING 2 VERSIONS IN THE BT ONLINE SHOP AND ON EBAY. MY USED MODEL DOES NOT MENTION INFINITY ANYWHERE, CAN ANYONE TELL ME THE DIFFERENCE BETWEEN THE TWO, AND WHY THE CALL CENTRE DENIES THEIR EXISTENCE. THANKS.
Solved!
Go to Solution.

There is only one Homehub 4. The shop shows two because if you order the Broadband one you will get the filters you need to put on the phone sockets. With the Infinity one you will not get the filters because they are not needed with Infinity.
See link for connecting your HH4 to Infinity
http://btsupport.custhelp.com/ci/fattach/get/2970435/1365176666/redirect/1
See link for connecting HH4 to broadband
http://btsupport.custhelp.com/ci/fattach/get/2970436/1365176688/redirect/1

HT201788 What speed disks should i use in an Apple Superdrive

What speed disks should i use in an Apple Superdrive?
Thanks

It matters little. The slower the burn speed, i.e. 2x or 4x, the better the burn.
What is important is the brand of media: most of here recommend Verbatim, Maxell and Taiyo Yuden.

Recording with audio playback slowed down 65% what speed do I need to speed the video back up to to get it into real time?

Ive recorded a test video with audio/music playback slowed down 65% what speed do I need to speed the video back up to to get it into "real" time?
If I'd slowed the audio playback down 50% I would make the video 100% faster.
If I'd slowed the audio playback down 100% I would make the video 200% faster.
So its obviously somewhere inbetween speeding up by 100-200%
Sorry but its melting my brain today and I cant remember the calculation.
thanks

hey all
Thanks for the advise on this. I will explain a little more what am have/am intending to do.
I have used Audacity to slow the song down (Effect>Change Tempo)
Audacity will allow me slow the original song down by up to 99% (Or anything in-between up to 3 decimal places)
Unfortunately I am working to a time restraint of 12 minutes per clip (as my DSLR will only allow up to a 12 minute clip).
The song at normal speed is 4 minutes long.
Originally I slowed the audio down by 50% (Making the audio 8 minutes long), lip synced to it using a rasta blaster and recorded the video using my DSLR at 720p 50fps.
I then imported the video and audio I had been lip syncing to into FCPX.
I sped up the video by x2 (equivalent to speeding it up 200%)
Retime>Fast 2X
Layered the PROPER normal speed audio back over the top and all was fine.
Test video complete.
(You can ignore the 65% slowed down audio I mentioned earlier if you like, that was just an example of a slower than 50% audio test)
Firstly what I really want to do is to be able to slow the AUDIO down as much as possible (But still within the restraints of only being able to adjust FCPX retiming within a whole 1 percentage in the final video edit), but have the AUDIO of the song as near to/under 12 minutes as possible.
I will then re-record the video again to this new slowed down audio.
Secondly I will speed up the video from 12 minutes to 4 minutes.
Thirdly I will layer the correct 100% Normal AUDIO on top.
The FINISHED video should then look like everyone is wizzing around at high speed but the guitar playing/lyrics look like they are being played/sung at the normal speed.
Whatever happens (due to the constraints of FCPX) I need the calculations to work so that FCPX is retimed exactly to a whole 1% for the final video to sync up correctly.
So what I need to know in a nut shell is:-
What calculation do I use to work out the percentage to slow a 4 minute song down to a 12 minute song?
What calculation do I use to work out the percentage of how much I need to then speed the 12 minute video up to turn it back into a 4 minute video?
My mind is melting

What speed should I get?

Not being "up to speed" with this ADSL "black art", can any knowledgeable person advise me as to what speed I should be getting based on these stats, please? Is it about right or should be more? ADSL line status
<script type="text/javascript"></script>Connection information<script type="text/javascript"></script>
Line state
Connected
Connection time
0 days, 0:06:33
Downstream
1,856 Kbps
Upstream
448 Kbps
ADSL settings<script type="text/javascript"></script>
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
6.0 dB / 12.0 dB
Line attenuation (Down/Up)
63.5 dB / 31.5 dB
Output power (Down/Up)
16.6 dBm / 11.9 dBm
Many thanks,
Oscar
Solved!
Go to Solution.

welcome to the forum
you can check here
http://www.kitz.co.uk/adsl/max_speed_calc.php
however many router show a max attenuation of 63.5 even though the correct figure is higher than that so using the kitz website is only an estimate. The further away from the exchange the lower your speed
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

What speed should I get on my N network?

I've got a MacBook Air on my wireless network. I have a Time Capsule then two Airport base stations extended off of this. I'm wondering what speed should I get in transfer theoretically. I feel my WIFI network performs horribly.
I have a 150 meg per sec download internet connection or better and on my hardwired iMac it flies. On the WIFI part though it's dreadful. The MacBook Air may run at 20 to 30 meg per sec and the iPad and iPhone much worse.
I've talked to Apple extensively only to find myself with a third base station in a small condo of 1100 sq ft. I'm finding this very frustrating as they've had me test this thing this way to Friday and it's driving me crazy.

Hi Shawn,
Thanks. This i very useful information. It is extended WIFI with two Airport Base stations providing the extension one specifically designed for air tune. There are probably about 8 to 9 devices on the network.
My speeds on the iMac wired Ethernet can hit about 250 mbs download from my ISP. My WIFI though sounds like its in your range as extended the MacBook Air is doing about 22 to 35 mbs, the iPad is the most pathetic at about 5mbs down and relatively the same up and the iphone actually maybe a bit better at twice that performance. Would that make sense.
It's interesting what you say about mulitple hops. I only added in that third base station as Apple wanted me to try an alternate Airport Express to see if that was the issue and it wasn't. I was just too disinclined to return the third one so I added it to the network so both AE's are running in extended mode. When I had joined with only two base stations, oddly enough the MacBook Air would scream but the iPad and iPhone worked in reverse and crawled. So Apple told me they should be extended. I just added the third in as extended.
Anwyay Shawn, potentially I might be running as expected which is odd in that I have never heard this from Apple. It's just all this trouble shooting to accomplish nothing.
Finally, other than the iMac, which I do work at 80% of the time, I wonder if having such a high performance internet service makes sense. I'm curious what your thoughts are on that. The service I have is:
     - Rogers Ultimate which does include a modem with WIFI
          - 150 mbs down 10 mbs up
          - unlimited bandwidth
Thanks Shawn
Kerry

What speed 1TB PCIe-based Flash Storage? in 13inch retina

I was order (pick-up 6 november) 13" 1tb 16gb and want know what speed have SSD?
or this STORE not SSD?
Thank you!

"...the drive is capable of nearly 2GB/s sustained transfer rates. "
http://9to5mac.com/2012/01/17/owc-gives-mac-pro-users-the-first-pci-express-ssd- option/

BT Infinity - IP Profile, what speed?

Similar Messages

Maybe you are looking for