BTE for material classification

Hi,
im searching for a BTE which trigger modification on material classifications. I found EVENT 4004 and 4005, but they not work. I change classification with mm02 under the classification tab. Have someone an idea if there is an EVENT for this? Or exists a BOR for this?
thx
Ralph

Hi Shri ,
BTE mainly for FI transactions .
BADIs for MM
BADI_MATERIAL_CHECK Enhanced checks for material master table
BADI_MATERIAL_OD
BADI_MATERIAL_REF    Addition of customer-defined default data for material
BADI_MATMAS_ALE_CR   Change Data in MATMAS IDoc When Generating an IDoc
BADI_MATMAS_ALE_IN   Change Data in MATMAS IDoc Before Posting
BADI_MATN1           BAdI for Conversion Exit MATN1
BADI_MATRIX_SORT     Sorting of Matrix Axis Population
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
Regards
Prabhu

Similar Messages

What is the impact - Activating Change Logs for Material Classification Dta

To activate Change Logs for Material Classification Data I must first set the flag for "Multiple Objs Allowed" for the Class Type 001 Material Class. I am curious of what the impact of setting this flag will be. Also, is there a way to measure the DASD impact of activating the Change logging for this data.
Thankyou
Kevin

In addition to the performance impact the process of turning on Change Logs for Classification data will convert the tables KSSK and AUSP to use an internal SAP number as a key instead of the Material number. This will cause problems for any custom programs that access those files directly and expect the material number to be the key. This file conversion occurs during the execution of program RCCLUKA2 which is used to Flag the change logs for existing records. This can be reversed by running report RMCLINOB. Because of the above impact we decided here to NOT implement this change in production.

BTE for Material Master

Is there a BTE for MM01 or MM02? I would like to capture the changes to data on these transactions when user has pressed the save button and also after the dB COMMIT is executed.
So far in my search, I have found that there is no BTE for Material master data transactions. I want to confirm this with other users. Also, is there a BAdI that I could use?
TIA.

Hi Shri ,
BTE mainly for FI transactions .
BADIs for MM
BADI_MATERIAL_CHECK Enhanced checks for material master table
BADI_MATERIAL_OD
BADI_MATERIAL_REF    Addition of customer-defined default data for material
BADI_MATMAS_ALE_CR   Change Data in MATMAS IDoc When Generating an IDoc
BADI_MATMAS_ALE_IN   Change Data in MATMAS IDoc Before Posting
BADI_MATN1           BAdI for Conversion Exit MATN1
BADI_MATRIX_SORT     Sorting of Matrix Axis Population
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
Regards
Prabhu

Table for Material Classification data

Hi gurus,
Can anyone please tell me which table we can see data for Material Classification.
If we goto MM03 and select the classification view we see two fields in the screen Package Type and Package Size. I want to know which tables keeps that data in.
Please help!
Thanks

Each of the characteristics shown in the Classification view of MM03 is an entry in table CABN. Each of the CABN records has a characteristic number (field ATINN). Look up the data in AUSP using your material number in the OBJEK field and the ATINN value from CABN and you'll find the characteristic value in the ATWRT field.
.. Craig

Change Documents for Material Classification data Changes

Dear Friends,
We have configured custom classification objects for material master and also we are able to maintain the material characteristics using MM01, MM02 and also using ALE interface. But I am not able to find the Change Documents in any of the table CDHDR & CDPOS. Please let me know what needs to be done to capture the change documents for a material classification changes in this case.
Many thanks for you inadvance.
Beast regards,
Mallikarjun.

Change logging of all Classification (including Material Classification) is controlled in the Class type configuration.
SPRO -> Cross Application Components -> Classification System -> Classes -> Maintain Object types and Class types -> Select Object Table = MARA -> Double Click Class Types under MARA -> Select Class Type 001 and Display -> Check whether "Change Docs" check box is checked on.
Also check that another flag "Chg. docs for Class" is set on all Objects under the Class type too (by double clicking the Objects folder for a Class type).
If the Change docs flag is checked on for the relevant Class type and Object then change docs are logged in CDHDR and CDPOS tables for object "CLASSIFY"
Also the "Change docs" flag cannot be set unless the "Multiple objects allowed" flag is also set in the Class type configuration.
Please refer [SAP Note 65124 - Classification Change Documents|https://service.sap.com/sap/support/notes/65124]
Also the above note says and I quote: If "Multiple objects allowed" indicator is not set, start the RCCLUKA2 program. The classification data are converted and the indicator 'Multiple object types allowed' is set. Now you can set the indicator 'Change documents' in Customizing of the class type. However, it only says that change documents are generally possible for this class type. Therefore you have to select objects under 'OBJECTS' for which the change documents are to be written.
So if the Class type doesn't have "Multiple objects allowed" set (along with Change docs flag not set), there is also a conversion that needs to be run using program RCCLUKA2.
Also when you transport the configuration to a target system, the program RCCLUKA2 should be run again, refer [Note 379180 - Classification data disappeared|https://service.sap.com/sap/support/notes/379180 ]

EOL date Issue in AUSP Table for Material classification in MM

Hi,
Issue: for 4 material's eol date available in bw and after some time the user removed the EOL date in R/3. after deleted eol data from R3, the material classification data source(1CL_OMAT001) not picking that material and old eol date available in bw instead of null. please let me know why the material classification not picking that material.
iam checking with MM team still they are saying that sap stranded process, but iam thinking maybe some configuration issue from MM side .still iam not sure that either configuration issue or something else and when we delete eol date then only date value should be
modified in AUSP table not entire record but in this case, entire has deleted from AUSP table.
If we provide any
value to the characteristic (EOL date), an entry will be created in the AUSP
table as shown below. ATFLV will have the characteristic value.
If we remove the
date of EOL from the material master, the entry in AUSP table will get deleted
as shown below . this is causing the issue .
when we delete the eol date in R3 why the entire record deleted from AUSP table. Please tell me the reason.
Thanks,
Polu.

It is like SAP has designed its classification system.
No entry is not a valid entry for a date field, it is initial, it is just nothing, hence no need to keep nothing as a value. Imagine the millions of classification fields that may not have any value entered. Would you really like to have this all with no value as record in AUSP?
You may want to consider to enter 31.12.2999 as EOL date instead of removing the entry.

Activation of History Log for Material Classification CLASS TYPE 001

Hi All.
I've a question about this object.
We need to launch RCCLUKA2 to activate multiple objects registration and to generate history log for changes in classification of materials (AUSP table).
Reference are sap notes 942691 and 943559.
I FOUND OUT THERE'S a big problem. RCCLUKA2 change AUSP objek key, using internal number range from INOB objects.
There're hundreds of custom reports and other stuff that read AUSP directly with Matnr Code as objek key.
I think that's a serious problem, isn't it? Or is there any solution about ?
Thanks for Help!
_______> old message
This report RCCLUKA2 does 5 steps.
1 step: activation flag for multiple objects in table TCLA and TCLAO only for input class type (in this case 001 -> MATERIAL);
2 step: download of KSSK data and AUSP data in two text files (name defined in input parameters);
3 step: delete all KSSK data and AUSP data for class type 001, 10.000 records every loop;
4 step: create reference object in table INOB for all records inserted in KSSKFILE, inserting all records in KSSK table at END of INOB upgrade;
5 step: inserting record in AUSP table from all records inserted in AUSPFILE, using INOB objectid created in step 4.
DEQUEUE ALL
We think that this process is a little bit dangerous in production system, due to procedures that always run, in background or foreground.
I've found a work around that creates an implicit enhancement for LCLVFF10 form FILL_REDUN.
I think that it's not suggested to create this enhancement because of the missing flags in TCLA/TCLAO and missing reference in INOB and KSSK database.
This enhancement would create records only in CDHDR and CDPOS with a general key object reference (such concatanate matnr(without-letters) mafid and atinn code).
This enhancement couldn't also activate the standard function of reading document changes from standard menu in MM03/MM02/MM01, etc..
Do you have any suggestion about this?
RCCLUKA2 is a very old report. SAP didn't give any advice or upgrades for this need?
Thanks for your help
Message was edited by: Roberto Vacca

Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks.

BTE for material master creation

Hi All,
I need to update material long text using the specific class and characterstic values of a material when it is created via MM01 transaction.
I want to do this by using BTE. Can you please explain on how can do this i.e. what BTE to be used, any settings required.
Regards,
Shahu

hi.
BTE is same as User exit.
Like user eict ,In BTE you can call the create event or directly workflow.
If you have confusion in BTE then go trough this docemnt:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
let me know if you need more help.
Reward point is also appricited.
sunil

Add Characteristics Value for material Classification

Hi,
My requirement is, when ever a particular Characteristic value is added/changed in MM01/MM02, then another characteristic value will get modified for the same material. Can someone have any solution for this?
Thanks,
Ipsita

you can achive this with object dependencies.
see here for full details:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/24/4766ba416711d189ec0000e81ddfac/frameset.htm

Error while generating material classification data source in R/3

Hi,
I am trying to generate the data source for material classification in R/3.
I have created the data source entry in CTBW and added the classification fields required for the data source. But while generating the data source i am getting an error, which says "BW Metadata is incomplete".
Is there any step, that i have missed? Please advise what needs to be done.
Thanks,
Manoj

Hi Santhosh,
The note seems to be quite old and may not be applicable since we are on the latest support pack.
We are using two different clients, one for configuration and the other for test data.
Thanks,
Manoj

Urgent help with Material classification

Thsi is regarding data into BW for Material classification.
I am tryign to create the extractors as suggested in BW expert & in the forums posted by others.
I did create 1CL_0MAT001 .but i did nto understand where to add the charerceristics & further steps. I have aroudn 15 charecteristics.-also i did not completely understand the Process of creating via CTBW t.code.
It woudl be really great if someone could explain.
Can anyone pls help me with this.
This is realy urgent.

Hi Chris,
Choose the transaction SBIW (Customizing for the BW source system) and the menu path Business Information Warehouse  Customer-defined DataSources  Cross-application Components  Classification System  Maintain DataSources for Classification data.
To maintain a DataSource, proceed as follows:
Specify a Basis DataSource that has an InfoSource you want to enhance (for example, 0MATERIAL_ATTR). Choose a client, a class type, and an object table from which you want to transfer the classification data (for example, 100, 001, MARA).
Click on Save.
Then select the line in CTBW and select Characteristic.
Specify the characteristics that you want to assign to the DataSource. Click on the generate datasources. The DataSource is generated, and given a status (N = new, for a newly created DataSource, and R = ready, following successful generation) and a technical prefix 1¬CL_... is added to the name
A Metadata upload replicates the DataSource along with its relevant properties in BW, where it can be assigned to an InfoSource.
A Metadata upload on the InfoObject/source system level has to be carried out so that the DataSources created in the OLTP are also available in BW. You access this function by clicking the right mouse button on Source system for InfoObject  Replicate DataSources,
Hope that helps. If you need any other info kindly let us know.
Regards.

Replicating material classification

Dear All,
Is it possible to replicate material classification from R/3 to SRM? How?
Thanks in advance,
Vijay

Hi VIjay
Via transaction mm03 in ECC in the classification view characteristics values are maintained for a product are maintained.
Functions like Material classifications, vendor partners, etc are not actually mapped from R/3 backend to SRM.To my knowledge, there is not integration for material classification between SRM and ECC.
Possibly you can develop a custom programm.
Thanks
Zameer Sayed

FM for getting Classification against Customer and Material

hi friends..
Is there any FM for getting Classification against Customer and Material.
transaction VCH3. (strategy SD03)
regards

please help
related tables are CABN and AUSP
and transaction is VCH3 and strategy SD01

Using TREX for Material master for longtext (basic data) and classification

Hi together,
I am only having some basic know how about TREX.
We want to use TREX for quick search in Material master long texts (like basic data and so on) and also for searching in characteristic values of material master (tab: classification).
The TREX is successfull installed and It was possible for me to create an index for Material BUS1006001 in SES_ADMIN and search the material in this transaction by TREX. I also find the index in TREX_ADMIN "green".
But there I could only use the attributes of the standard business objects (for example describtion of material master = short text).
Now I want to use the long texts and the classification. What do I have to do in SES_ADMIN or somewhere else? Actually I only want to use the functionality in SAP GUI. If I know how to make the indixes I could program an own F4-Help for this in ABAP.
Can anybody help me?
Thanks a lot.
Florian

Hi Florian,
SES_ADMIN is the admin cockpit of the Search Engine Service (SES).
SES-based solutions usually include searching the long text. Just test!
SES-based solutions usually do not include searching via classification.
The successor framework of SES is "Embedded Search".
Embedded Search is available with NW 7.01, corresponding to ERP 6.04. For details see SAP note 1254901
Classification is supported by Embedded Search with NW 7.02, corresponding to ERP 6.05.
ERP 6.05 is in unrestricted availability since summer 2011.
If the customer can not upgrade to ERP 6.05, there is a preliminary SES-based solution for searching via classification.
The solution can only be provided via SAP PLM consulting.
Kind regards, Klaus Irle

Functional module for Getting Material classification data.

Please tell me Functional module for Getting Material classification data like class type , class, characteristics and characteristics values for material.

Dear,
FM:
CLAF_CLASSIFICATION_OF_OBJECTS
Table KLAH Class Header Data
- KSML Characteristics of a Class
Regards,
R.Brahmankar

BTE for material classification

Similar Messages

Maybe you are looking for