Functional module for Getting Material classification data.

Please tell me Functional module for Getting Material classification data like class type , class, characteristics and characteristics values for material.

Dear,
FM:
CLAF_CLASSIFICATION_OF_OBJECTS
Table KLAH Class Header Data
- KSML Characteristics of a Class
Regards,
R.Brahmankar

Similar Messages

Function Module for Creation of classification data for a Routing

Hi
Can you please let me know if there are any function modules/Bapi's to create Classification data for a Routing?
THanks
Shekar

For creating classification data, have a look at the function group CTMS and function module CTMS_DDB_SET_VALUE_INTERNAL.
Not sure what you mean by "Routing".
For BAPIs also look into the function group CLBPA, that sits in the same development package CLCL as the function group CTMS.
Hope this helps.

Function Module for getting the desired date

Hi All,
I need a function module where in get the date value from Current date - 540 days.
i,e System Date - 540 days = ????
Thanks
Suresh

previous FM works good , this is for ur info , to give in month, date and year instead of onlly days
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
    EXPORTING
      date      = sy-datum
      months    = '00'
      days      = '07'
      years     = '00'
      signum    = '-'
    IMPORTING
      calc_date = w_due_date.
Message was edited by: chandrasekhar jagarlamudi
Message was edited by: chandrasekhar jagarlamudi

Function Module for getting Payroll start date and end date

Hi Gurus,
If I give one date then is there any function module to find the payroll period start date and enddate for that given date?
Points will be awarded
Thanks
Ravi

Hi,
Try these FMs
HR_PAYROLL_PERIODS_GET
HR_BEN_PAY_GET_PAYROLL_PERIODS
HR_PAYROLL_PERIOD_GET
HR_P06I_GET_PAYROLL_PERIOD
Regards,
PRashant

Any function module for getting fiscal year week numbers

can any one provide me function module for getting fiscal year week numbers ? if no function module please let me know work around.
Thanks!
Lakshmikandh

hi,
Use FM <b>'DATE_GET_WEEK'</b>...
parameter D1 LIKE SCAL-DATE.
Data w like scal-week.
CALL FUNCTION <b>'DATE_GET_WEEK'</b>
EXPORTING
date = D1
IMPORTING
WEEK = W
EXCEPTIONS
DATE_INVALID = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write W+4(2).
Regards,
Santosh

BAPI or Function Module to get MSEG table data based on PO Number (EBELN)

Hi
1. Is there any BAPI / Function Module to get PO details based on Plant and PO date?
2. Is there any BAPI / Function Module to get Material document details(MSEG data) based on PO number?
Thanks
Narendra

Hi,
check the Bapis Givem below
BAPI_PO_GETITEMS
http://abap.wikiprog.com/wiki/BAPI_PO_GETDETAIL1
you will get the detail.
Regards

Function Module for getting address from address number

Hi all,
Is there any function module for getting address from address number. kindly reply.
regards,
siya

HI,
just try this function module:
CALL FUNCTION 'HR_GET_ADDRESS'
    EXPORTING
      ankey          = ankey
      anart          = anart
      molga          = '01'
    IMPORTING
      address_detail = adr_data
    EXCEPTIONS
      not_found      = 1
      OTHERS         = 2.
HOPE IT WILL HELP YOU
regards
rahul

Is there any function module for getting distribution list name

Hi all,
Is there any function module for getting distribution list name when there is same description for two distribution list name.
or
help me how to fetch the correct distribution name when there is same description.
In order to send mails.
Tell me ASAP.
thanks
sagar.

http://www.sapbrainsonline.com/REFERENCES/FunctionModules/SAP_function_modules_list.html
list of Fms

Any Function Module For getting Shipment Details

Hi All,
I want to get all details of shipment. i tired , but unable to get any function? I was able to find the creation or change shipment function modules, but not able to find the function module for getting the details for Shipment.
like BAPI_SHIPMENT_CHANGE Change Shipment
BAPI_SHIPMENT_CREATE Create Shipment
similary
Do you have any idea for getting (display)the details of Shipments?
Regards,
Raju

hi,
you can use
VTTP,VTTK
or
RV_SHIPMENT_READ

Bapi or Function Module to update Material Master Data

Hi Friends,
           could anyone let me know any BAPI's or Function Modules for Material Master UPdate.
Thanks in Advance
Regards
Tina

hi Tina,
check this BAPi BAPI_MATERIAL_SAVEDATA to create and change the material master .
Try ....
BAPI_MATERIAL_SAVEDATA
REPORT Z_BAPI_MAT.
               STRUCTURE DECLARATIONS                             *
TABLES: BAPIMATHEAD, "Headerdata
        BAPI_MARA,    "Clientdata
        BAPI_MARAX,   "Clientdatax
        BAPI_MARC,    "Plantdata
        BAPI_MARCX,   "Plantdatax
        BAPI_MAKT,    "Material description
        BAPIRET2.     "Return messages
DATA:V_FILE TYPE STRING.
DATA:
BEGIN OF LSMW_MATERIAL_MASTER,
    MATNR(018) TYPE C, "Material number
    MTART(004) TYPE C, "Material type
    MBRSH(001) TYPE C, "Industry sector
    WERKS(004) TYPE C, "Plant
    MAKTX(040) TYPE C, "Material description
    DISMM(002) TYPE C, "Extra Field Added In the Program as itsrequired
    MEINS(003) TYPE C, "Base unit of measure
    MATKL(009) TYPE C, "Material group
    SPART(002) TYPE C, "Division
    LABOR(003) TYPE C, "Lab/office
    PRDHA(018) TYPE C, "Product hierarchy
    MSTAE(002) TYPE C, "X-plant matl status
    MTPOS_MARA(004) TYPE C, "Gen item cat group
    BRGEW(017) TYPE C, "Gross weight
    GEWEI(003) TYPE C, "Weight unit
    NTGEW(017) TYPE C, "Net weight
    GROES(032) TYPE C, "Size/Dimensions
    MAGRV(004) TYPE C, "Matl grp pack matls
    BISMT(018) TYPE C, "Old material number
    WRKST(048) TYPE C, "Basic material
    PROFL(003) TYPE C, "DG indicator profile
    KZUMW(001) TYPE C, "Environmentally rlvt
    BSTME(003) TYPE C, "Order unit
    VABME(001) TYPE C,
    EKGRP(003) TYPE C, "Purchasing group
    XCHPF(001) TYPE C, "Batch management
    EKWSL(004) TYPE C, "Purchasing key value
    WEBAZ(003) TYPE C, "GR processing time
    MFRPN(040) TYPE C, "Manufacturer part number
    MFRNR(010) TYPE C, "Manufacturer number
    VPRSV(001) TYPE C, "Price control indicator
    STPRS(015) TYPE C, "Standard price
    BWPRH(014) TYPE C, "Commercial price1
    BKLAS(004) TYPE C, "Valuation class
END OF LSMW_MATERIAL_MASTER.
               INTERNAL TABLE DECLARATIONS                         *
*to store the input data
DATA:
BEGIN OF it_matmaster OCCURS 0.
        INCLUDE STRUCTURE LSMW_MATERIAL_MASTER.
DATA:
END OF it_matmaster.
*for material description
DATA:BEGIN OF IT_MATERIALDESC OCCURS 0.
     INCLUDE STRUCTURE BAPI_MAKT .
DATA:END OF IT_MATERIALDESC.
*to return messages
DATA:BEGIN OF IT_RETURN OCCURS 0.
     INCLUDE STRUCTURE BAPIRET2.
DATA:END OF IT_RETURN.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-002.
PARAMETERS:P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1 .
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE'
    IMPORTING
      FILE_NAME     = P_FILE.
               TO UPLOAD THE DATA                                  *
START-OF-SELECTION.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = V_FILE
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
tables
    data_tab                      = IT_MATMASTER
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
               DATA POPULATIONS                                    *
LOOP AT IT_MATMASTER.
BAPIMATHEAD-MATERIAL = IT_MATMASTER-MATNR.
BAPIMATHEAD-IND_SECTOR = IT_MATMASTER-Mbrsh.
BAPIMATHEAD-MATL_TYPE = IT_MATMASTER-Mtart.
BAPIMATHEAD-BASIC_VIEW = 'X'.
BAPIMATHEAD-PURCHASE_VIEW = 'X'.
BAPIMATHEAD-ACCOUNT_VIEW = 'X'.
BAPI_MARA-MATL_GROUP = IT_MATMASTER-MATKL.
BAPI_MARA-OLD_MAT_NO = IT_MATMASTER-BISMT.
BAPI_MARA-BASE_UOM = IT_MATMASTER-MEINS.
BAPI_MARA-BASIC_MATL = IT_MATMASTER-WRKST.
BAPI_MARA-MFR_NO = IT_MATMASTER-MFRNR.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-OLD_MAT_NO = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-BASIC_MATL = 'X'.
BAPI_MARAX-MFR_NO = 'X'.
BAPI_MARC-PLANT = IT_MATMASTER-WERKS.
BAPI_MARC-PUR_GROUP = IT_MATMASTER-EKGRP.
BAPI_MARCX-PLANT = IT_MATMASTER-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
IT_MATERIALDESC-LANGU = 'EN'.
IT_MATERIALDESC-MATL_DESC = IT_MATMASTER-MAKTX.
append IT_materialdesc.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
      headdata                   = BAPIMATHEAD
      CLIENTDATA                 = BAPI_MARA
      CLIENTDATAX                = BAPI_MARAx
     PLANTDATA                  = BAPI_MARc
     PLANTDATAX                 = BAPI_MARcx
    FORECASTPARAMETERS         =
    FORECASTPARAMETERSX        =
    PLANNINGDATA               =
    PLANNINGDATAX              =
    STORAGELOCATIONDATA        =
    STORAGELOCATIONDATAX       =
    VALUATIONDATA              =
    VALUATIONDATAX             =
    WAREHOUSENUMBERDATA        =
    WAREHOUSENUMBERDATAX       =
    SALESDATA                  =
    SALESDATAX                 =
    STORAGETYPEDATA            =
    STORAGETYPEDATAX           =
    FLAG_ONLINE                = ' '
    FLAG_CAD_CALL              = ' '
   IMPORTING
     RETURN                     = IT_RETURN
   TABLES
     MATERIALDESCRIPTION        = IT_MATERIALDESC
    UNITSOFMEASURE             =
    UNITSOFMEASUREX            =
    INTERNATIONALARTNOS        =
    MATERIALLONGTEXT           =
    TAXCLASSIFICATIONS         =
    RETURNMESSAGES             =
    PRTDATA                    =
    PRTDATAX                   =
    EXTENSIONIN                =
    EXTENSIONINX               =
WRITE:/    IT_RETURN-TYPE,
        2   IT_RETURN-ID,
        22 IT_RETURN-NUMBER,
        25 IT_RETURN-MESSAGE.
           IT_RETURN-LOG_NO,
           IT_RETURN-LOG_MSG_NO,
           IT_RETURN-MESSAGE_V1,
           IT_RETURN-MESSAGE_V2,
           IT_RETURN-MESSAGE_V3,
           IT_RETURN-MESSAGE_V4,
           IT_RETURN-PARAMETER,
           IT_RETURN-ROW,
           IT_RETURN-FIELD,
           IT_RETURN-SYSTEM.
ENDLOOP.
Regards,
Naveen

Function module for getting Vendor Address details

Hi,
Im new to this group,and new to ABAP
plz hep me out by solving ABAP Query...
i want to generate a report for getting Vendor Details
like Vendor address,Ph num and Email
input fields are Company code,country key and Account Group.
im Using Smart Forms for this..
but im not getting the Exact Function module to get All Required Details..
regards
Smitha

thanks for ur quick reply...
SELECT SINGLE LIFNR
FROM LFB1
INTO V_LIFNR
WHERE BUKRS EQ V_BUKRS.
CALL FUNCTION 'VENDOR_READ'
    EXPORTING
      i_bukrs         = V_BUKRS
      i_lifnr         = V_LIFNR
    EXCEPTIONS
     NOT_FOUND       = 1
     OTHERS          = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this is the code i have written...
but my problem is there no table in the Function module....
for Example...
CALL FUNCTION 'QPAX_PLMKB_READ_FROM_PLKO'
    EXPORTING
      i_plnty            = 'Q'
      i_plnnr            = V_PLNNR
      I_PLNAL            = V_PLNAL
      i_sttag            = V_DATUV
   TABLES
    T_PLMKB_TAB        = IT_TAB
i want the function modules with tables and proper input...

Function Module for calculating hours between dates and their times.

Hi all,
Is there any standard function module for calculating the time difference in hours between two dates with start and end times.
Regards,
Sudipto.

Sudipto,
How're you ????????????????????
Check out the following Function Module:
SD_DATETIME_DIFFERENCE (Give the difference in Days and Time for 2 dates)
Regards,
Abir
Don't forget to award Points *

Function module for getting the open qty

HI experts,
I have a PO quantity(EKPO_MENGE).against same PO and item item(EBELN and EBELP) if Goods receipt has happened (MSEG_ERFMG) then i need to calculate the open qty.and also by netting the open quantity if multiple GRs has done against the same PO and item.
Can you suggest any function module to get this open PO quantity.

Hello,
Hope this link can help you.
[Po Open Quantity;
Thanks
Jayant

Function module for getting the all PO waiting for release

Hi,
Is there any standard Function module for gettting all the PO's which all waiting for release.
Regards
Bala.

hi Bala,
ECC 6.0 Exits for VA01
go through the above link i think that will help u...
Regards,
sindhu.

Function module for getting stock details for a given period or date range

Hi experts,
Any function module available for getting stock details batch, plant, storage location, and period wise. <<removed_by_moderator>>
Thanks in advance
M Prasanna
Edited by: Vijay Babu Dudla on Apr 28, 2009 7:23 AM

Hi,
Try with this FM:
BAPI_MATERIAL_AVAILABILITY .
Go through this link for more details:
ABAP Development
by
Prasad gvk.

Functional module for Getting Material classification data.

Similar Messages

Maybe you are looking for