Bubble chart legend problem

Hello.
I have problem with bubble chart the problem is that in chart legend appear the same number of object what bubble in chart e.g. if chart have 5 bubble then legend also have 5 object.
What do I want to obtain is that in chart appear bubble which have different color (color depends on condition) and legend relate only colors. For example if chart have 4 bubble 3 - red and 1 - green then in legend appear only two position which relate green and red color (now appear 4 object three about red and one green).
Can any one tell me how to resolve this problem?

I already did this I added three condition (three colors red, green and yellow) in field "Value of" I choosed "is equal to" unfortunately it didn't help.
Maybe I joust try to describe what I want to show in this chart.
Suppose I have table with four columns u201Cdateu201D, u201Camount (number type)u201D, u201Csize (number type)u201D, u201Crisku201D (text type) now where this value appear on chart:
- date is x axis
- amount is y axis
- size is a bubble size
- risk will be bubble color
Now I have 3 kind of risk u201CLowu201D (green color), u201CMediumu201D (yellow color) and u201CHighu201D (red color).
Now in my data base I have table with record:
- u201C11-11-2009u201D, u201C1u201D, u201C2u201D, u201CMediumu201D
- u201C12-11-2009u201D, u201C2u201D, u201C1u201D, u201CMediumu201D
- u201C13-11-2009u201D, u201C1u201D, u201C1u201D, u201CHighu201D
- u201C14-11-2009u201D, u201C3u201D, u201C3u201D, u201CLowu201D
- u201C15-11-2009u201D, u201C1u201D, u201C1u201D, u201CLowu201D
Ok so now In My chart I should have 5 bubble and in legend three value (green, red, yellow) but in this case I always have five (the same number what record in table).
Sorry if this example is not clear.

Similar Messages

Flash Chart Legend Problem

Hi,
Im having a problem with my flash chart legends in Apex3.0.
I have changed the name of the Series to what i want to appear in my legend - however the legend just shows "Value" for all my Series.
Does anyone else have this problem?
Cheers,
Immanuel

Hello,
I need a legend like this
No of Clicks('000)
If i give l" No of Clicks('000)" as column alias, chart says Error :No chart data available.
If i give "No of Clicks('000')" or "No of Clicks(''000)" as column alias in the query, it displays the correct legend..
Would anybody tell me how to show the legend like this
No of Clicks('000)
Regards,
Archana

Chart legend problem

I have multiple pie charts displayed on the same page. I would like to maintain consistent legend across all the graphs as below.
0 - 10 % - Red
11- 20% - Green
21 - 30% - Blue
31- 40% - Black
41-50% - Yellow
some of the charts may not certain ranges as mentioned above. I always want to show consistent colors in the legend, instead of apex choosing the colors for the chart randomly. that means, when the values are 11- 20% it's green, 31-40% is always black, if those ranges are avaialble. Is there way to enforce such color shcme/legend to SVG charts?. any ideas are appreciated.
thanks in advance,
Surya

any ideas are appreciated.

Bubble Chart with legend changes axis dimensions according to labels length

I have a Bubble Chart with legend on the right. Data are by series and the series are set dynamically with a drop down combo which replace the content of each series from time to time. Every time the series changes, also the name of the series changes and the legend on the right shows the new series names. The problem is that also the x axis dimension changes according to the new labels size, so the bubble chart changes its axis width in relation to the labels length in the legend. Is its possible to make somehow the bubble chart axis of a fixed lenght?
Xcelsius 2008, SP4, Windows XP
Thanks in advance

Hi Matt,
I just got a chance to try out your suggestions, and the
chart that is right in the main application renders the labels
fine, but the exact same code loaded in as a module doesn't. And it
never does, not even if the scale changes. Do you know why that
would be?
Mukul

Problems On Show Chart Legend in Crystal Report Java Viewer

Hi all,
We found the problem on show chart legend values of each column, i have already set the "Tool tip text " option by formart chart, but the ouput on java viewer on can show first column data. seem Java view not support for display Tool Tip by chart columns ?
Thanks
Andrew

i missed the following line in my code.
rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
now it works......
my next issue is that,
chart returns True & False captions. but i want to show actual value. how its to be done
regards,
Padmanaban V

Bubble chart - problem with overlaying bubble

Hi all,
I have problem with bubble chart. Two bubbles are overlaying, that wouldn't be a problem, but one of this two bubbles is bigger and other is smaller. This smaller is beneath bigger. Why smaller is not on top of bigger? How to solve this?
Thanks

Hi Andrew,
We have experienced similar problems, however they usually were with much larger models (10+ tabs, 10+ components in each).
If you're using a lot of data or more intensive processes/components, that may have caused the problem to express earlier, though.
The best recommendation is to keep Tabset use shallow: don't embed containers within containers, not too many components in a tab, not too many tabs.

Problem: chart-legend doesn't copy into Keynote

I have some charts from numbers (imported xls-files) that i want to copy into a keynote-presentation.
The chart can be pasted into the presentation, but the chart-legend never shows up.
I've tried selecting and copying the chart and the chart-legend but that doesn't work. Copying only the chart-legend also doesn't work.
Can somebody help me out here?
thanks,
jojo

jojo,
Arrange > Group your Chart and Legend before copying. They will stay together then.
Regards,
Jerry

Problem: chart-legend (numbers) doesn't copy into Keynote

I have some charts from numbers (imported xls-files) that i want to copy into a keynote-presentation.
The chart can be pasted into the presentation, but the chart-legend never shows up.
I've tried selecting and copying the chart and the chart-legend but that doesn't work. Copying only the chart-legend also doesn't work.
Can somebody help me out here?
thanks,
jojo

Jerrold Green1 wrote:
For some reason, you need to Arrange > Group your Chart and Legend before Copying if you want them to stay together. Not sure why this is so, but the fix works.
My guess is:
when we copy paste without leaving a given program, we use a structure of the clipboard defined by the program itself. This structure gives the ability to copy paste different kinds of objects.
For instance, if we copy a chart and its legend in Numbers and paste in a different location in a Numbers document, which may be a different one, we paste the chart and the legend.
When we leave the source program to a enter a different program, if the proprietary clipboard format of this program is different than the source one, the clipboard's contents is "normalized" to match the destination program's requirements. When we pass from Numbers to Keynote, a clipboard containing a chart and a legend is normalized as a graphic object.
If we try to paste in a TextEdit document formatted as a Text one we will get nothing.
If we paste in a Textedit document formatted as RTF, we will get the chart.
My hope is
(a) that the iWork team build a proprietary clipboard structure common to the different components of the suite. I feel that this may be done.
(b) that the operating system is able to transfer the proprietary clipboard components between two programs using the same. I'm not sure that this requirement is satisfied at this time.
Yvan KOENIG (from FRANCE vendredi 26 décembre 2008 15:23:48)

Date range problem (bubble chart)

In my bubble chart on X axis Iu2019m displaying date range I have two parameters start_date and end_date in Crystal 2008 this range is displaying correct but in my web app not. In web app this range is displaying from 01-01-1970 to 01-01-1970 (but Iu2019m setting them from 01-09-2009 to 31-12-2009). Iu2019m sure that the parameters start and end date is set correct (I display this parameter in other place and date is correct). I'm doing this in JSF (IceFaces) and I'm using "reportPageViewer".
What could be wrong?

The dates you are seeing are the default values. Check your code again, I don't believe you are setting them correctly.

Bubble Chart Label in OBIEE

Hello,
I have a bubble chart on dashboard
measure1 - x axis
measure2 - y axis
org name - level access
revenue - size of bubble
quarter - legend axis
the problem is when, i move the mouse over the buble i see the revenue, but what I want to see is org name
How can this be acheived
Reply

hi,
ckeck this...
http://obiee101.blogspot.com/search/label/CHART
i hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Bubble chart - labels?

Hi,
I'm a problem with the bubble chart. I need to display a specific label near every bubble. In excel It's possible with the data label function. I see that in the Xcelsius 2008 SP3 there is a "data label" selection in the Appearance - Text tab, but it allow to see only X/Y values, the series name or the bubble size....

Hi,
I am not sure if our approach suits to your requirements but we implemented a kind of legend below the bubble chart, showing the "technical" values of the bubbles (x-/y-position and bubble size) and some additional, more functional values like name and type of the corresponding real world object which is represented by the bubble.
Our legend is dynamically filled via the drilldown-function of the bubble chart, i.e. when you move the mouse over one bubble all corresponding values of this bubble are displayed in the legend. BTW: These values remain in the legend until you move the mouse over another bubble, i.e. you don't have to keep the mouse over the bubble in question as long as you do not move it over another bubble.
Hope this helps!
Michael

Bubble Chart: missing exception colors, mousover text etc.

Hi,
I have some problems with a bubble chart. The definition of the query is like this:
project status sfactor rfactor budget
1--1---30-100--
30
2--2---10---15--
30
3--1---234--
45
4--3---50---10-----140
Project and status are characteristics, the other objects are key figures. A project has a status. There are 6 stati. Based on the status the bubble in the bubble chart shall have a specific color. So I set an exception for each status level. I use a BW 3.1 SP19.
Based on this query I create a bubble chart in web. I have now the following problems:
1.The bubble chart shows only 3 different colors (red, yellow, green) and not these colors that are also used in the BEx query. In BW3.5 more colors are displayed. Is there any restriction in 3.1?
2.In case of mouseover (over the bubble of the last project see above) the text "project 4: 140" is displayed. Is it possible to display also the description and value of the status, sfactor and rfactor?
3.I configured the chart options in such a way, that rfactor and sfactor shall be displayed above the bubble. But this works not for all buubles. Any explanation for that?
4.If I restrict the displayed bubbles only to one status level (by means of a dropdownbox), then the displayed bubble is bigger than before. I fixed x- and y-axis. So why do I get now an other size for the selected status level. Any chance to avoid this?
5. The chart legend still shows the original bubble colors, so not the exception colors. Is it possible to force the legend to show the correct colors?
I would be very grateful for any help.
BR, Andreas
Message was edited by: Andreas Appelt

Hi Andreas
1.) http://help.sap.com/saphelp_nw04/helpdata/en/c4/274b795a809a4da0f3c991284e1cee/frameset.htm
2.) Only with own javascript on not released HTML objects
3) Could be a problem of size (is there enough place to see the text?)
5) No
Heike

Limit on number of series in bubble charts?

Hello all,
I need to use a bubble chart in one of my visualizations (Xcelsius Engage 2008, Excel model only - no live connection), showing gross sales and margin for 13 categories series. If I map the series(es) individually, then they all show on the legend, and the graph limits change as I use the list box selector to choose the particular customer, but no bubbles - or any indication of data points - show up on the graph.
If, however, I choose to map to a range, I do see data points - but only for the first 6 of the 13 categories. I've checked the cell range to ensure all 13 categories are included in the selection, and they are, but - again - only 6 show up, or get mapped to the "series" box.
I've resized to cover more real estate, thinking perhaps Xcelsius just didn't want to display bubbles on a smallish graph field, but with no change in the display results. I have a tree map linked to the exact same data, in the same location, and it works just fine. But nobody likes the tree map; they want bubbles.
Am I missing something, or is there a limit on the number of series a bubble chart is capable of displaying?
Edited by: Jennifer Leppert on Aug 15, 2008 12:34 PM
Two swfs showing the difference and the xlf are located at http://www.mediafire.com/?sharekey=9e4101c4b4a3cdc1d2db6fb9a8902bda. Check under the "AEL" tab.

Thank you for the response, Javier. Unfortunately, it doesn't quite answer the problem.
I have tried mapping the series individually. While the interface will capture all of the label data, the graph itself does not show any data points when switching to preview mode, or exporting to another file type. (See "Manual Series.swf" at the link in my initial post for a visual).
The X and Y axes are correct, and do adjust depending on the customer selected in the list box, but, again, no bubbles show up. Is there something else I'm missing, or not doing correctly? I have an evaluation copy - perhaps it is a limit in the eval copy that would disappear upon registration of a full license?

Custom Formatting Of Chart Legends

I've been playing with Flex Charting, and I have lots of nice
looking graphs that I've created from database feeds. However, what
I really want to know how to do is format the chart legend better.
For example I have a pie chart that has about 50 different data
items/series and the legend is huge in either horizontal or
vertical mode it prints all the way down the page. How can I make
it two, three or more columns?

Hi Justin,
I think, there is no way to do such a customization with the standard Javadoc (i.e. powered by the Standard Doclet).
After all, the job of the standard Javadoc is doing standard (general) things and I just cannot imagine any general rule (setting or option) that would embrace all kinds of possible customizations about displaying of annotations.
So, the only way in your situation would be to modify the doclet itself. You can try tweaking the standard doclet: overload some its classes or change sources (according to the license they provide). However, I just can say, that way proved to have lots of limitations.
Fortunately, I could suggest you a different rote that would allow you solving your problem in a few minutes. We have a product called "DocFlex/Javadoc":
http://www.filigris.com/products/docflex_javadoc/
This is a highly customizable Javadoc doclet. More exactly, this is a system for rapid development of professional quality doclets (with the support of both framed/single-file HTML and RTF output).
With that tool, the generation of every sort of Javadoc output is programmed in special templates (using graphic Template Designer). The product is provided with the "standard template set" that generates the HTML Java API documentation very similar to the standard Javadoc.
In fact, to solve you task, you will need to modify a subtemplate called "annotations.tpl". See on this page: http://www.filigris.com/products/docflex_javadoc/templates.php
If you are interested about all this, we could help you to modify the necessary template absolutely free. Then, you will need only to buy a full product license to have everything work without limitations and that will be all!
So, if you are interested, please let us know by sending a e-mail to the address found on this page:
http://www.filigris.com/company/contact.php
Regards,
Leonid Rudy
http://www.docflex.com

Portfolio (Bubble) Chart Capability

Greetings,
I am trying to create a bubble chart using WAD 3.5, the Portfolio chart type seems to be the most appropriate, but I can not figure out how to get the chart to show the metrics per my specification.
X-Axis - Change in Days
Y-Axis - Change in Value
Z-Axis (Size) - Total Value
Bubble Color - Region
Individual Bubble - Opportunity
The results should be a bubble chart with 4 different series, each series containing a datapoint representing an opportunity.
The bubbles are sized based on the total value of the opportunity and are positioned in the chart based on the shift in days (x axis) and value (y axis) from a previous time period.
The data is not a problem, I have a query with all the relevant characteristics and key figures. The issue is getting the chart to properly chart these items. The closest I can get is with:
Row Fields: Region
Column Fields: Opportunity, Key Figure Structure
When I do this, I do get one 'series' for each region, but all the bubbles for each series get placed at the X-Axis value for the first opportunity. Other attempts have resulted in creation of a series for each opportunity.
Thanks.

The frustrating part of this - is that the "Chart Wizard" view in Web App Designer shows exactly this scenario when previewing the Portfolio chart design - a few color-coded series, each containing multiple datapoints, with varying bubble sizes places on the chart based on key figures on the X and Y axes. I can not figure out how to get any query to replicate this.

Bubble chart legend problem

Similar Messages

Maybe you are looking for