Date range problem (bubble chart)

In my bubble chart on X axis Iu2019m displaying date range I have two parameters start_date and end_date in Crystal 2008 this range is displaying correct but in my web app not. In web app this range is displaying from 01-01-1970 to 01-01-1970 (but Iu2019m setting them from 01-09-2009 to 31-12-2009). Iu2019m sure that the parameters start and end date is set correct (I display this parameter in other place and date is correct). I'm doing this in JSF (IceFaces) and I'm using "reportPageViewer".
What could be wrong?

The dates you are seeing are the default values. Check your code again, I don't believe you are setting them correctly.

Similar Messages

Stored Procdure date range problem

Hi All,
My Vendor created a Stored procedure which asks for a date range when first creating a standard report. Once the date range is entered then I select which data fields I want to display, etc. Once in the report, I can see the parameter fields, but they have a [?] with a weird little yellow icon, and I cannot see the parameter fields in the parameter tab. My users need to be able to change the date range in InfoView, but since there isn't a date range parameter, they cannot, and I also cannot get it to show up in the report in CR 2008. The only time I can get the date range entered is when creating a report, here is the procedure that the vendor gave me:
XSAC_GET_TEST_COUNT
                      ( P_REPORT_CURSOR IN OUT XSAC_REPORTS.TEST_COUNT_VIEW_TYPE,
                        P_START_DATE     IN DATE ,
                        P_END_DATE       IN DATE )
Not sure how to fix this, and neither does the Vendor, although they created it.
Any help would be much appreciated.
I have other reports where I have successfully created a date range parameter, and they work fine, this is my first time with a stored procedure. and it asking for a date range when selecting the data source. Not from a date field in the report

Hi All,
I found the problem,
The first Option is: Show on (Viewer) Panel, it was set to Do Not Show . So it was hidden.
I changed it Editable and it works fine.
Hopefully this will help someone in the future.

Date Range problem

hi,
on selection screen i am enetring the date range.
i.e 01.05.2006 to 10.05.2006
for this date range i am fetching material numbers to my itab.
actually there is no material numbers for the date range 02.05.2006 to 03.05.2006 but i nedd to display material number under that particular date only like below.
01.05.2006 02.05.2006 03.05.2006 04.05.2006 05.05.2006
1234                                                1567           4562
but for me output is coming like below.
01.05.2006 02.05.2006 03.05.2006 04.05.2006 05.05.2006
1234              1567           4562
how to solve this problem
Title edited by: Alvaro Tejada Galindo on Jun 3, 2008 3:43 PM

REPORT zp_example NO STANDARD PAGE HEADING LINE-SIZE 300.
TABLES : mara.
SELECT-OPTIONS : s_date FOR sy-datum.
DATA : it_mara TYPE TABLE OF mara WITH HEADER LINE,
       date LIKE sy-datum,
       m type i value 1.
WHILE ( s_date-low LE s_date-high ).
WRITE : s_date-low.
SELECT * FROM mara INTO it_mara WHERE ersda = s_date-LOW.
WRITE :/ IT_MARA-MATNR UNDER S_DATE-LOW .
ENDSELECT.
ADD 1 TO s_date-low.
sy-linno = 1. "   <----- check the number according to your page heading
ENDWHILE.

How do I modify an event's date range?

I recently imported a series of photos from my camera, entering both an event name and description for the event. All photos but one were from this event. After deleting that single photo, the date range displayed underneath the event name still displays a range which includes the date from that single image. So now, even though all the images in the event are from the same day, the date of the event does not accurately depict this. How do I modify the date range?

This doesn't address the date range problem which no amount of Adjusting Date and Time or Batch Changing will fix, instead LarryHN workaround seems to work great. I imported over 11,000 photos into 08 and lots of them had a date range from 98 to 2001. The Batch Rename fixed all but one batch whichb just would not budge until Larry's workaround with the new Event method.

Bubble chart - problem with overlaying bubble

Hi all,
I have problem with bubble chart. Two bubbles are overlaying, that wouldn't be a problem, but one of this two bubbles is bigger and other is smaller. This smaller is beneath bigger. Why smaller is not on top of bigger? How to solve this?
Thanks

Hi Andrew,
We have experienced similar problems, however they usually were with much larger models (10+ tabs, 10+ components in each).
If you're using a lot of data or more intensive processes/components, that may have caused the problem to express earlier, though.
The best recommendation is to keep Tabset use shallow: don't embed containers within containers, not too many components in a tab, not too many tabs.

Bubble chart legend problem

Hello.
I have problem with bubble chart the problem is that in chart legend appear the same number of object what bubble in chart e.g. if chart have 5 bubble then legend also have 5 object.
What do I want to obtain is that in chart appear bubble which have different color (color depends on condition) and legend relate only colors. For example if chart have 4 bubble 3 - red and 1 - green then in legend appear only two position which relate green and red color (now appear 4 object three about red and one green).
Can any one tell me how to resolve this problem?

I already did this I added three condition (three colors red, green and yellow) in field "Value of" I choosed "is equal to" unfortunately it didn't help.
Maybe I joust try to describe what I want to show in this chart.
Suppose I have table with four columns u201Cdateu201D, u201Camount (number type)u201D, u201Csize (number type)u201D, u201Crisku201D (text type) now where this value appear on chart:
- date is x axis
- amount is y axis
- size is a bubble size
- risk will be bubble color
Now I have 3 kind of risk u201CLowu201D (green color), u201CMediumu201D (yellow color) and u201CHighu201D (red color).
Now in my data base I have table with record:
- u201C11-11-2009u201D, u201C1u201D, u201C2u201D, u201CMediumu201D
- u201C12-11-2009u201D, u201C2u201D, u201C1u201D, u201CMediumu201D
- u201C13-11-2009u201D, u201C1u201D, u201C1u201D, u201CHighu201D
- u201C14-11-2009u201D, u201C3u201D, u201C3u201D, u201CLowu201D
- u201C15-11-2009u201D, u201C1u201D, u201C1u201D, u201CLowu201D
Ok so now In My chart I should have 5 bubble and in legend three value (green, red, yellow) but in this case I always have five (the same number what record in table).
Sorry if this example is not clear.

How to see Control chart for a specific date range in QGC3

Hi
I am developing SPC for my client.I am facing one problem.
I am using one control chart for all inspection lot for a particular MIC.Free inspection point is used in inspection plan.
Control chart is used 516.(XMR chart)
Now when i am calling control chart for MIC executing QGC3,chart is showing results since creation chart date to todays date.
Now if i want to see chart for a particular period or date range,what is the procedure.
Thanks in advance
Nilanjan

Hi,
1. Even though when i give the Created on, and to date the system is displaying the report which is prior to the created on date.
2. Similarly the report data is different when the field is maximum no of Hits is given. for example when i giving this field as 10, 20, 30, etc the report is showing only 10 line items. if i enter 50, 60 etc it is showing the list for half i given.
Note that system is having more than 1000 line items to display..
Regards,
R. Loganathan

Date range query problem in report

Hi all,
I have created a report based on query and i want to put date range selection but query giving problem.
If i am creating select list selection then it is working fine means it will display all records on the particular date.
But what i need is that user will enter date range as creation_date1,creation_date2 and query should return all the records between these date range. i want to pass it by creating items, i created two items and passing creation_date range to display all records but not displaying and if not passing date then should take null as default and display all records
Here is the query:
/* Formatted on 2006/12/10 20:01 (Formatter Plus v4.8.0) */
SELECT tsh."SR_HEADER_ID", tsh."SALES_DEPT_NUMBER", tsh."COUNTRY",
tsh."LOCAL_REPORT_NUMBER", tsh."ISSUE_DATE", tsh."SUBJECT",
tsh."MACHINE_SERIAL_NUMBER", tsh."MACHINE_TYPE", tsh."MACHINE_HOURS",
tsh."STATUS"
FROM "TRX_SR_HEADERS" tsh, "TRX_SR_PARTS" tsp
WHERE (tsh.status LIKE :p23_status_sp OR tsh.status IS NULL)
AND (tsh.machine_type LIKE :p23_machine_type_sp)
AND ( tsh.machine_serial_number LIKE
TO_CHAR (:p23_machine_serial_number_sp)
OR tsh.machine_serial_number IS NULL
AND ( TO_CHAR (tsh.failure_date, 'DD-MON-YY') LIKE
TO_CHAR (:p23_failure_date_sp)
OR TO_CHAR (tsh.failure_date, 'DD-MON-YY') IS NULL
AND ( TO_CHAR (tsh.creation_date, 'DD-MON-YY')
BETWEEN TO_CHAR (:p23_creation_date_sp)
AND TO_CHAR (:p23_creation_date_sp1)
OR TO_CHAR (tsh.creation_date, 'DD-MON-YY') IS NULL
AND (tsh.issue_date LIKE :p23_date_of_issue_sp OR tsh.issue_date IS NULL)
AND (tsh.country LIKE :p23_country_sp OR tsh.country IS NULL)
AND ( tsh.local_report_number LIKE TO_CHAR (:p23_local_rep_num_sp)
OR tsh.local_report_number IS NULL
AND ( tsp.part_number LIKE TO_CHAR (:p23_part_number_sp)
OR tsp.part_number IS NULL
AND tsh.machine_type IN (
SELECT DISTINCT machine_type
FROM trx_sales_dept_machine_list
WHERE sales_department_id IN (
SELECT DISTINCT sales_department_id
FROM trx_user_sales_department
WHERE UPPER (user_name) =
UPPER ('&APP_USER.'))
AND SYSDATE >= valid_from)
AND tsh.sr_header_id = tsp.sr_header_id
can any one tell me wat is wroung in this query.
Any other way to write this?
Thank You,
Amit

Hi User....
Here is some date range SQL that my teams uses with some success:
For date columns that do not contain NULL values, try this (note the TRUNC, it might help with your "today" problem).
The hard coded dates allow users to leave the FROM and TO dates blank and still get sensible results (ie a blank TO date field asks for all dates in the future.
AND TRUNC(DATE_IN_DATABASE)
BETWEEN
decode( :P1_DATE_FROM,
TO_DATE('01-JAN-1900'),
:P1_DATE_FROM)
AND
decode( :P1_DATE_TO,
TO_DATE('31-DEC-3000'),:
:P1_DATE_TO)
For date columns that contain NULL values, try this (a little bit trickier):
AND nvl(TRUNC(DATE_IN_DATABASE),
decode( :P1_DATE_FROM,
decode( :P1_DATE_TO,
TO_DATE('30-DEC-3000'),
NULL),
NULL)
BETWEEN
decode( :P1_DATE_FROM,
TO_DATE('01-JAN-1900'),
:P1_DATE_FROM)
AND
decode( :P1_DATE_TO,
TO_DATE('31-DEC-3000'),
:P1_DATE_TO)
Note the 30-DEC-3000 versus 31-DEC-3000. This trick returns the NULL dates when the FROM and TO date range items are both blank.
I hope this helps.
By the way, does anyone have a better way of doing this? The requirement is given a date column in a database and a FROM and a TO date item on a page,
find all of the dates in the database between the FROM and TO dates. If the FROM date is blank, assume the user want all dates in the past (excluding NULL dates). If the TO date is blank, assume that the user wants all of the dates in the future (excluding NULL dates). If both FROM and TO dates are blank, return all of the dates in the databse (including NULL dates).
Cheers,
Patrick

How to limit data range in a Line chart with Time Refresh Control

Hi All,
I have a Line chart with Time Refresh Control and I would like to make some constraints to this navigation.
For example, I would like to limit the user to navigate in a data range of 8 hours.
Is this posible?
Thanks in advance

Hi Pedro,
as far as I know, this is not possible using the time controls on an iChart. However, you may have some success by using your own time controls which call JavaScript methods exposed by the applet.
For example, you could begin by hiding the time and calendar buttons on an iChart, and creating some buttons of your own. For instance, to set the start date of a query (and thus the start date of the iChart using the query), you can use the following:
document.getElementById("appletID").getQueryObject().setStartDate(<date string>);
Using code like the above (look into the xMII script assistant and documentation), you should be able to build time controls which satisfy your requirements. The exact format of <date string> in the sample above will depend on the date format defined in the query template this script calls.
Hope this helps,
Sascha

Oracle 10g - Problem with Date Ranges using Between

I am keeping track of patients who have not been contacted during a date range. if a nurse adds an event or note and the note is type 1,3,4 then this is a contact. The following works but if the event or note was made on the same day as the report is run, the current contact is not printed. Any help to improve the query and identify the problem would be appreciated. Also, if you add '1' to' n.created_date_time BETWEEN '10-Jan-2010' AND TRUNC(SYSDATE)' so it is ' n.created_date_time BETWEEN '10-Jan-2010' AND TRUNC(SYSDATE) + 1'. It works. What is wrong?
SELECT upper(symptom_text),
COUNT(UNIQUE(c.patient_id)) ,
COUNT(UNIQUE(
CASE
    WHEN e.eventdate BETWEEN '10-Jan-2010' AND TRUNC(SYSDATE)
    OR (n.created_date_time BETWEEN '10-Jan-2010' AND TRUNC(SYSDATE)
    AND n.note_type_id                                             IN (1,3,4))
    THEN c.patient_id
    ELSE 0
END)) - 1
FROM patient c,
cust_info ci,
event e,
note n
WHERE c.physician_id = 74
AND c.patient_id      = ci.patient_id
AND ci.info_type_id    = 32
AND ci.symptom_text      IS NOT NULL
AND c.patient_id      = e.patient_id(+)
AND c.patient_id      = n.pk_id(+)
AND n.table_name(+)    = 'patient'
GROUP BY upper(symptom_text)
ORDER BY DECODE(upper(symptom_text), 'A+', 1, 'A', 2, 'B', 3, 'C', 4, 'D', 5, 99)I suspect the end date is not inclusive. Fields are Date data types. Thanks for any help.

Hi,
achtung wrote:
Understood. Frank was correct. Do you mean about the dates? Is that issue solved now?
It would help a lot if you posted some sample data (CREATE TABLE and INSERT statements) and the results you want from that data. Simplify as much as possible. For example, if everything involving the e and n tables is working correctly, forget about them for now. Post a question that only invloves the c and ci tables.
But, additionally, when a record in the cust_info doesn't exist my contact count is inaccurate. How can you explain this conceptually. I understand the query path is checking for this record due to the predicate. Perhaps the query should be redesigned. Thanks for your input!Again, you can see the results, and you know what they should be. Nobody else has that information. Please post some sample data and the results you want from that data.
In your earlier message you said
Could there be a problem if a record does not exist in the ci table?The condition:
AND ci.symptom_text IS NOT NULL
filters for this right? Maybe this could be part of the problem. why I'm not seeing records when a note is added to a patient's doc. How would this be technically be explained? You're doing a inner join between c and ci:
    AND c.patient_id      = ci.patient_id
    AND ci.info_type_id   = 32
    AND ci.symptom_text   IS NOT NULL ...Rows from c will be included only if there is a row in ci with the same patiend_id: even more, that matching row in ci must also have info_type_id=32 in a non-NULL symptom_text, otherwise, the row from c will be ignored.
If you want rows from c to be included even if there is no matching row in ci, then do an outer join, like you're already doing with the e and n tables:
WHERE c.physician_id = 74
    AND c.patient_id         = ci.patient_id (+)
    AND ci.info_type_id (+) = 32
    AND ci.symptom_text (+) IS NOT NULL
    AND c.patient_id         = e.patient_id(+)
    AND c.patient_id         = n.pk_id(+)
    AND n.table_name(+)      = 'patient'

Problem with customer exit variable on date range

Hi All,
I have customer exit variable on date range. In the selection screen it has to give the week range as a default (05/21/2009 to 05/27/2009).
Earlier its working fine and from yesterday onwards it is not working properly. yesday onwards default date range was not displaying in selection screen.
Wht would be the problem.
Thanks in Advance

Hi Ashish,
I checked every thing what u told earlier. Every thing is fine.
And another thing is
I have routine in infopackage level. Since day before yesterday it was working fine and yesterday onwards it was not working.
Eg: budat will take the data based on routine for the week. But yesterday onwards it is not picking up the data.however I have the data in datasource for the week.
Wht would be the problem. I debuged the code and its working fine.
Sekhar

Interactive Column Chart w/Sliding Date Range?

I've created a stacked column chart in Numbers 3.0. It displays stacked data for a one week period using seven columns, one for each weekday. Is it possible to make an interactive version of this chart that would still display all seven stacked columns, but allow me to use a slider control to adjust the date range? Ideally I'd like the slider to adjust the date range one day at a time, so I have a rolling 7 day view of my data.
Any suggestions?

Data is the original data table.
Set Start is a four cell table with A2 set as a Slider, range 1 - 100, and the formula below in B2:
B2: =OFFSET(Data :: $A$1,A,0)
Cell B2 is for display only. It offers live feedback to the user while setting the beginning date for the chart, but is not used in the calculations in For Chart.
For Chart is a Summary table containing the headers shown.
There is one formula in this table, entered in A2, then filled right to D2, and down to row 8:
A2: =OFFSET(Data :: $A$1,ROW()-2+Set Start :: $A$2,COLUMN()-1)
The chart draws its information from For Chart. Here is a second chart image using the same data table. The only change is that the user has reset the slider to a larger value. The start date on this chart is the same as the last date on the one above.
Regards,
Barry

Problems with date in stacked bar charts

I am having a lot of problems trying to generate stacked bar charts where one of the fields is a date. Using the chart generator in word, the stacked bar charts work perfectly if I use (for example) Labels=Country, Series=Product, Values=Quantity(Sum) . The correct quantities are shown.
However if I change Country to Expiry (date), the quantities are all wrong ? Such that I have no idea how it is obtaining the values.
The generated code is :
<Graph depthAngle="50" depthRadius="8" pieDepth="30" pieTilt="20"
       seriesEffect="SE_AUTO_GRADIENT" graphType="BAR_VERT_STACK">
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<LocalGridData colCount="{count(xdoxslt:group(.//G_MED, 'EXPIRY'))}"
                 rowCount="{count(xdoxslt:group(.//G_MED, 'PRODUCT'))}">
    <RowLabels>
      <xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                          select=".//G_MED" group-by="PRODUCT">
        <Label>
          <xsl:value-of select="current-group()/PRODUCT"/>
        </Label>
      </xsl:for-each-group>
    </RowLabels>
    <ColLabels>
      <xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                          select=".//G_MED" group-by="EXPIRY">
        <Label>
          <xsl:value-of select="current-group()/EXPIRY"/>
        </Label>
      </xsl:for-each-group>
    </ColLabels>
    <DataValues>
      <xsl:for-each-group xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                          select=".//G_MED" group-by="PRODUCT">
        <RowData>
          <xsl:for-each-group select="current-group()" group-by="EXPIRY">
            <Cell>
              <xsl:value-of select="sum(current-group()/QUANTITY)"/>
            </Cell>
          </xsl:for-each-group>
        </RowData>
      </xsl:for-each-group>
    </DataValues>
</LocalGridData>
</Graph>Any help would be greatly appreciated !
Cheers,
Brent

Thank you all for your replies so far:
@Alex: You are right, using your short script in sqlplus gives me also 2009 as result
So, I am now posting the essential excerpts of the procedure because the whole one is to large:
function insert_szrl (my_fremd_name varchar, my_elementadresse varchar,
my_zeitstempel varchar, my_wert float,
my_status varchar, my_zyklus varchar,
my_offset integer,
my_quelle varchar, my_nzm_daten integer) return integer is
begin
my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
if my_zyklus = 'mm' then
my_zeitstempeldate := add_months(to_date(last_day(to_date(my_date, 'dd.mm.yyyy')), 'dd.mm.yyyy'),-1) +1 + (my_tageswechsel+1/24);
my_days := to_date(last_day(to_date(my_date, 'dd.mm.yyyy')), 'dd.mm.yyyy') - add_months(to_date(last_day(to_date(my_date, 'dd.mm.yyyy')), 'dd.mm.yyyy'),-1);
my_year := to_number(to_char(to_date(my_date,'dd.mm.yyyy'), 'yyyy'));
ptime.umschalttage_tuned (my_year, my_ws, my_sw);
end if;
While debugging the complete procedure I see since the start only a date which looks like '01.04.2009 07:00:00'
Edited by: user10994305 on 19.05.2009 15:58
Edited by: user10994305 on 19.05.2009 15:58

Issue with displaying QM control chart for specific date range

Dear All
In our chemical mfg organisation, we just implemented SAP QM solution and things are working fine. I have implemented control chart functionalities as below:
SPC Criteria in Inspection Plan: Task List Charateristics / Material (0020)
Sampling Procedure: Fixed Sample / SPC Inspection (without inspection point)
We use process orders to get the inspection lots for products (material) and record results for the MICs and UD the inspection lots.
Currently all our Control Chart have status 1 (created) and we have not moved any of those charts to status 3 and 5 yet.
Using QGC1 when user trying to run control chart for any particular material in the plant and for a specific date range, report showing all the charts for that material with different MICs as expected. Though the result is NOT restricted to the selection dates either against "Lot Created On" or " Insp. Start Date" ( may be due to SPC criteria????) , its always showing all the result for any particular MIC for that material starting from go live till today.
How to restrict the dispaly of result on the chart for any particular MIC against the Material / Plant within a specific date range ?
Looking forward for your response.
Best Regards
SK

Hi,
1. Even though when i give the Created on, and to date the system is displaying the report which is prior to the created on date.
2. Similarly the report data is different when the field is maximum no of Hits is given. for example when i giving this field as 10, 20, 30, etc the report is showing only 10 line items. if i enter 50, 60 etc it is showing the list for half i given.
Note that system is having more than 1000 line items to display..
Regards,
R. Loganathan

Bubble chart Show data tips always on

Hi
I am having a bubble chart with 2 or more series. where itemRenderer could be triangle,Cross or Circle. Now i need to display the label on the radius of item.
Any help is heartly welcome.
with thanks

Thanks John, that link was very helpful.
Shame you can't seem to get the X & Y values for a normal Line chart though. However having the series name available makes such a difference

Date range problem (bubble chart)

Similar Messages

Maybe you are looking for