Bug in Kotoeri (Japanese kotoeri input) please help ?

I have kotoeri all setup but in a word document when I try to input japanese words (having checked hiragna or katakana) using my qwerty keyborad the kotoeri switches continuously between romajis and kanas like this : nいっpおn trying to type 'nippon'
Anyone has an idea of how to fix thus bug ? Tried everythin but bit desperate. Is it something I should check or uncheck in Kotoeri preferences ?
Thank you for your inpout

Thank you for your feedback. I do not have this problem with textedit nor with the browser. It works fine on both textedit and browser.
Only with word it seems.
If I type 'nihon' this is what I get ; nいhおn (with Hiragana box ticked in Kotoeri menu) . Kotoeri switches between roman characters and hiragana..
I really don't know how to solve this.

Similar Messages

Executing web service operation with complex input - Please help

Hi All,
I am working on invoking a web service through ADF. The request format for the webservice consists of multiple occurance of same element. Below is sample request. here <index> is repeating n number of times.
<soapenv:envelope>
<soapenv:Body>
          <ns6:StoreDocumentRequest>
               <ns6:docFileType>ABC</ns6:docFileType>
               <ns6:Metadata>
                    <ns6:index>
                         <ns6:indexType>Format_Type</ns6:indexType>
                         <ns6:indexValue>ACROBAT</ns6:indexValue>
                    </ns6:index>
                    <ns6:index>
                         <ns6:indexType>Buyer_No</ns6:indexType>
                         <ns6:indexValue>1234567</ns6:indexValue>
                    </ns6:index>
                    <ns6:index>
                         <ns6:indexType>Document_Type</ns6:indexType>
                         <ns6:indexValue>101A</ns6:indexValue>
                    </ns6:index>
                    <ns6:index>
                         <ns6:indexType>Capture_Location</ns6:indexType>
                         <ns6:indexValue>XYZ</ns6:indexValue>
                    </ns6:index>
               </ns6:Metadata>
               <ns6:Content>XXXXXXXXXXXX</ns6:Content>
          </ns6:StoreDocumentRequest>
     </soapenv:Body>
</soapenv:envelope>
now I need to populate these values thrugh Operation binding in my managed bean class. I have also dragged these parameters and operation on my jsf page to get hold of those in my managed bean context. I am having following code in my managed bean to set these parameters.
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding storeDocumentBinding = bindings.getOperationBinding("StoreDocument");
storeDocumentBinding.getParamsMap().put("docFileType", filetype);
storeDocumentBinding.getParamsMap().put("Content", filecontents);
storeDocumentBinding.getParamsMap().put("indexType", filecontents);
storeDocumentBinding.getParamsMap().put("indexValue", filecontents);
storeDocumentBinding.getParamsMap().put("indexType", filecontents);
storeDocumentBinding.getParamsMap().put("indexValue", filecontents);
storeDocumentBinding.execute();
Here I am facing some issues:
1. The operation is not picking values put from ParamMap(). It is taking values as empty (as in my .jspx page form, I have made it hidden though). It takes value from my jspx page form, which is blank.
2. when I am manually entering values in the .jspx page form, for <indexValue> and <indexType> tags, it is taking only one value (last one) for creating the request.
3. the storeDocument() function is a SOAP based service. How can I check for SOAP response after operationBinding.execute(). I checked for response after execution, it sends an object as result. How to get a SOAP response from it.
I need to fetch few values from the SOAP response and display it on screen.
Please help me out. I am noob in ADF.
regards,
Rajan

Hi Puthanampatti,
I followed the link and did exactly as mentioned. Here is my code
public String downloadDocument(FacesContext context, OutputStream out) throws IOException {
BindingContext bctx = BindingContext.getCurrent();
BindingContainer bindings = bctx.getCurrentBindingsEntry();
OperationBinding retrieveDocumentBinding = bindings.getOperationBinding("RetrieveDocument");
DCIteratorBinding attachmentsIterator = (DCIteratorBinding)bindings.get("AttachmentsIterator");
String documentId = attachmentsIterator.getCurrentRow().getAttribute("Seq").toString();
System.out.println(customSoapProvider.getRequest()); // getting null here
AttributeBinding docFileTypeVal = (AttributeBinding)bindings.getControlBinding("docId");
docFileTypeVal.setInputValue(522117);
Object result = retrieveDocumentBinding.execute();
System.out.println(customSoapProvider.getResponse()); //getting null here
but I am getting a null response in the last line.
what am I missing here.
regards,
Rajan
Edited by: Rajan M on Jan 5, 2013 11:27 AM

I tunes 7 bugs and downgrades? so stuck please help

i downloaded iT7, worked fine sound, speed, interface, updated to 7.0.1 and every song is static. tried to downgrade to 6.0.5 but wont allow to open library since it was rewritten by iT7. please help what should i do and how can i do it are all my songs this way or will it be fixable? dont kow what to do.

hopefully they will come out with a fix on this, there are a lot of people in this same boat.

TV keeps changing input please help

I have a LCD tv it's about four years old the problem is it keeps changing input by itself and will stop on random ones for a few seconds then continue to scan through again. I removed the batteries from remote and still does it I also unplugged the tv still same problem last I held the power button down for five seconds( I was told this is how you reset tv not sure if true) please gelp

You could attempt to install a firmware update:
TV Firmware Update File: XV645U_Model_Se... DOWNLOAD Version: 6.1.46.0 Posted Date: 2011-07-28 Relea...
If that doesn't work properly or doesn't it fix it, it could require servicing.
- Peter

Is this a bug or normal???please help???

hi everyone and thankyou in advance for any closer on this simple yet annoying issue i have with my ps4......basically when i log in to my console it will clearly state how many friends i have online from the home screen. BUT this number will never change and when inside the friends list it will show the correct number of friends online, and the only way the home screen number changes is with a reboot or log off. can anyone please tell me if this is normal because it does'nt feel normal , more like a bug , are other people noticing this issue? thankyou.

Some others are getting the same, needs Sony to sort it, don't worry about it.

UnknownHostException on Japanese Windows XP - Please Help!!!

Hello,
I am running the following code on Japanese Windows XP:
String localHostName = java.net.InetAddress.getLocalHost().getHostName();
If the Computer name is in English, this works fine.
If the Computer name is in Japanese, I get an UnknownHostException in InetAddress.java, line 1191.
If I run this same code on a Japanese Windows 2K, with a Japanese computer name, it works fine.
I tried 3 different JREs: 1.3.1_11, 1.4.2_01, and 1.4.2._04 - same result. This seems to be a difference between Windows 2K and XP.
I searched the web and the forums and I can't see any reference to this specific problem. Is this a known issue?
Thanks in advance!
Dave Raskin
[email protected]

I searched the bug database for UnknownHostException and got 0 results.

Row Currency a bug in 10.3.4 Stegman, please help

I have a ReadOnlyView bound to two pages. When I move from one page to the next one, why do I get RowCurrency errors? is the only way to solve this is by setting EnableTokenValidation=false in pagedef? Sounds like this is stopgap solution. I also noticed that this is a 3.4 bug. I use 10.3.4

John:
Here is the story
I have a Read Only View Object that returns me certain data from a table. Now, I do need to check the data on each page. In other words, I do have to get the data in the AppModule before loading each page. Let us say, the App Module controls several pages. I go to the first page, the method in the AppmModule that retrieves data from the readonly data works perfectly. Now, I click on a second page, when I run the AppModule that calls the VO, before the page is loaded, I get RowCurrency error. It sounds like the App Module has lost all ideas of a row in the VO. That is fine, I don't care where the row is. It is just a search VO and a readonly VO. is there something I need to do to refresh the VO or the iterator? If so, how? I know the criteria I use to execute the query that operates on the VO in the app module has changed. But, that should not matter. It is a readonly VO.
I am so confused I am thinking about creating a new VO that does the same thing with a different name for each pages. But, I know that is a bad solution.
ADFBCUSER

Bug of Dv6500 new bios ! Please help !

Hello to everyone.
Yesterday I downloaded a new bios sp52477AMD.exe for my laptop pavilion Dv6500.
Everything went smoothly as at the end of flashing procedure I got the message of success.
At the following reboot, all the leds were illuminated and the fan started running a few seconds,
but the display remained black.
After having took out the power cord, the battery and the mercury cell, I pushed down the on/off
switch for 30 milliseconds before putting back the power cord. Unfortunately, the display still
remained black.
I would be grateful if you could help me.
My deep thanks in advance for your kindness and time.
Best regards,
itsarinya

If you haven't a backup for the 300 pictures, they are unrecoverable.
However, you'd better have a try with a third iPhone recovery software like on this blog.
http://easy-iphone-recovery.blogspot.com/2013/09/iphone-recovery-resource.html

I have a 2009 macbook air with 10.6.8 and over 20gb of memory left and also 2mb, aka all of the requirements for mavericks, i've tried every solution and yet mavericks will still not download? Somebody please help me.

Seriously bugging me and stressing me out - please help me out.

Check if your machine can accept it
https://www.apple.com/osx/specs/
If you have TimeMachine, there is a hidden TM local file taking up the remaining space on the drive.
It's not counted on the size because it self scales as more of your user data is written to the drive.
Backup all your users files off the machine to a external storage drive (not TimeMachine as it will drastically change once Mavericks is installed) and phyically unmount/disonnect.
Next Trash > Empty Trash the users files on the boot volume that you copied to the external drive.
Paste this into Terminal to turn off TimeMacine local backups and press enter, enter your admin password and press enter
sudo tmutil disablelocal
(To re-enable it: sudo tmutil enablelocal)
then turn TimeMacine on/off and reboot the machine. Check your drive space now in Applications/Utilities > Activity Monitor.
Try the Mavericks upgrade again, check your machine specs (Apple menu > about this Mac > more info) for a model identifier and consult Apple's site if your machine can accept Mavericks.
https://www.apple.com/osx/specs/
Mind you that 10.7-10.9 will NOT run your currently installed PowerPC based software.
Some of your older software may cease to function (Intel processors or not) because of the huge jump in OS X versions.
If your not currently under AppleCare, I would advise against a OS X upgrade as it can have issues with your hardware and the firmware can brick the machine.

Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Please Help!!!

Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Is this a software bug or Hardware problem?? Please Help!!!

Hello,
No, it is not normal. Follow this article:
http://support.apple.com/kb/ht1414
If this doesnt solve the issue your iPhone will need service.
Burcu

Which font.properties file to use- please help

I am working on an application for accepting hindi text as input.Please help me in following matter-
1. I have several font.properties file on my application server machine. Also some jre have font.propeties file. Which file should I change so that my forms 6i deployed on this application server can accept hindi font insatlled on application server machine.
2. If I need to change my Jinititor , where should i make changes.
Please help

you have asked so many questions about hindi text, etc... and nobody could help you. Please contact the support and open an ITAR at metalink.oracle.com. They should help you.

HT4528 My IPhone Bugged out/It is currently in the reset mode. I need to exchange all of my contacts from my Yahoo acct. to my new IPHONE. Can you please help me?

Hello ,
I purchased my IPHONE about 2 months ago. I am visiting family in DE & this tuesday it starting to go off & on by itself. Then the icons looked like they were floating . Then I could not call or text . The SIRI device would not work. Then it would shut down then the apple icon would reappear. I took it to a verizon dealer in Rehoboth DE & they said it BUGGED OUT/It is in a RESTORE MODE. It will not turn on. We could not transfer anny of my pics or contacts. I never even had a chance to back up the memory on ITUNES.
The tech @ Verizon said to contact APPLE to trouble shoot and try and transfer the contacts from my yahoo acct.
Can you please help?
Gina

set up your yahoo account in mail, contacts, calendars as an Exchange Account and you should be able to get your contacts from Yahoo from there.

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers!

Please help! My Itunes says corrupt file and will not open (IMac 2010). I couldn't fix it by reinstalling so I moved it to trash. It will not delete from my trash as it is saying "Japanese.lproj" is in use. I can't delete or open to close it, what do I do

Please help!
My Itunes says there is a corrupt file and will not open (IMac 2010). I couldn't fix it by reinstalling ITunes so I moved ITunes to trash. It will not delete from my trash as it is saying "Japanese.lproj" is in use. I have never opened or used "Japanese.lproj". I can't delete ITunes or open ITunes to close the Japanese.lproj, what do I do? Thank you for any help you can provide..

It will not delete from my trash as it is saying "Japanese.lproj" is in use. I have never opened or used "Japanese.lproj".
Interesting. This sort of thing is more common on Windows systems. Taken at face value, one of the iTunes program files (one of the Japanese language resources) is damaged.
I'd try running your Disk Utility over your startup disk. Does it find/repair any damage? If so can you empty your trash and reinstall your iTunes successfully now?

Urgent, Please help !!! Input Date field in Mysql database using JSP

Hi All,
Please help me ! I am trying to store a date field in MySql databaseusing JSP on Tomcat Server.I am gettting the following error.
I am taking the String Input and then trying to convert it into date type
inorder to store it into date field in a database.
I am using the following code :
<%
try{
String dt=request.getParameter("avldt");
SimpleDateFormat adt= new SimpleDateFormat("dd-MM-yyyy");
Date sqlToday = new java.sql.Date(adt.parse(dt).getTime());
catch(ParseException e){
e.printStackTrace();
%>
But I am getting the following error message :
Class jsp.myjsp.SimpleDateFormat not found.
Please help me !!!.It's very urgent.
Thanks,
Savdeep

programming is more then copy pasting, it actually is usefull to think about what you are doing. First you declare that you date is format dd-MM-yyyy, then you want to parse a date in format dd/MM/yyyy and behold Java warns you it cannot parse the one into the second ! Cant you solve the rest of this puzzle yourself then ?

Bug in Kotoeri (Japanese kotoeri input) please help ?

Similar Messages

Maybe you are looking for