BUG - Reformat in 10.1.3.2 erases explicit type argument specifications

JDeveloper: 10.1.3.2.0.4066
Explicit type argument specifications seem to be erased when using the reformat function (Ctrl-Alt-L) in JDeveloper.
For example, the following code compiles and runs before a reformat:
import java.util.*;
class Snow {}
class Powder extends Snow {}
class Light extends Powder {}
class Heavy extends Powder {}
public class AsListInference2 {
  public static void main(String[] args) {
    List<Snow> snow = Arrays.<Snow>asList(new Light(), new Heavy());
    for (Snow s: snow) { System.out.println(s); }
}After the reformat, "Arrays.<Snow>asList(" is changed to "Arrays.asList(", causing a compile error.

Thanks Loren,
I'll file a bug on this
Frank

Similar Messages

  • Hi. my laptop was reformatted recently, and my itunes there erased. i created a new one but the problem is it doesn't sync with my ipod anymore. what is the solution for this? can someone give me a tip? will really appreciate. thanks

    hi. my laptop was reformatted recently, and my itunes there erased. i created a new one but the problem is it doesn't sync with my ipod anymore. what is the solution for this? can someone give me a tip? will really appreciate. thanks

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • Bug in oracle portal: problem in pl/sql item type

    I created a pl/sql item type... based on a stored proc... whenever I make a change to the store proc I have to readd the item based on this item type since the result on the item type is not updated is this some bug in oracle portal

    I created a pl/sql item type... based on a stored proc... whenever I make a change to the store proc I have to readd the item based on this item type since the result on the item type is not updated is this some bug in oracle portal

  • Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

    Hi,
    Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
    After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
    I followed the install prcedure, clicking next a few times etc...
    I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
    I checked the process an hour in and message on screen read:
    Secure disk erase failed with the error:
    could not open disk
    The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
    The only thing that appears in disk utility is the OSX install DVD.
    I can't even shut down the mac as everything under the apple tab is greyed out!
    I'm guessing this means my hard drive is broken right?
    If anyone has any other ideas of what to try I'd really appreciate that.
    How do I turn the machine off?
    If my hard drive is gone then should I consider getting an SSD drive?
    Any recommendations for such a drive would be great.
    Hope you can help!

    Did you partition the drive?
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

  • [svn:fx-trunk] 6340: * Fixed Bindable bug fix where the generated setter was using the type

    Revision: 6340
    Author:   [email protected]
    Date:     2009-04-28 11:08:50 -0700 (Tue, 28 Apr 2009)
    Log Message:

    error dateField not selecion date 27/11/2002 ?
    This is bug flex 3 ?
    thanks

  • WebLogic 8.1 SP2 bug in JDBC Pool creation for IBM Informix Driver - Type 4 XA

    Funny business happens when you create a JDBC Connection Pool with IBM's Informix Driver - Type 4 XA under WebLogic 8.1 SP2
    I have included the ifxjdbc.jar and ifxjdbcx.jar in the classpath in the the extENV.cmd, but I kept getting errors on connection:
    weblogic.common.ResourceException: 0:com.informix.asf.IfxASFException: Attempt to connect to database server (myhost) failed. - with nested exception:
    [weblogic.common.ResourceException: com.informix.asf.IfxASFException: Attempt to connect to database server (myhost) failed.]
    at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1180)
    at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1040)
    Then I realised the WebLogic console was swapping these properties:
    serverName=ol_myserver
    ifxIFXHOST=myhost
    Terrible forehead-slap!
    I rechecked and this what happens:
    Informix Server: -> ifxIFXHOST
    Host Name: -> serverName
    But the URL is correct.
    jdbc:informix-sqli://myhost:1543/mydb:informixServer=ol_myserver
    Notice that the exception message says:
    Attempt to connect to database server (myhost) failed.
    Alpha

    Alpha Lau wrote:
    Funny business happens when you create a JDBC Connection Pool with IBM's
    Informix Driver - Type 4 XA under WebLogic 8.1 SP2
    I have included the ifxjdbc.jar and ifxjdbcx.jar in the classpath in the
    the extENV.cmd, but I kept getting errors on connection:
    weblogic.common.ResourceException: 0:com.informix.asf.IfxASFException:
    Attempt to connect to database server (myhost) failed. - with nested
    exception:
    [weblogic.common.ResourceException: com.informix.asf.IfxASFException:
    Attempt to connect to database server (myhost) failed.]
    at
    weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1180)
    at
    weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1040)
    Then I realised the WebLogic console was swapping these properties:
    serverName=ol_myserver
    ifxIFXHOST=myhost
    Terrible forehead-slap!
    I rechecked and this what happens:
    Informix Server: -> ifxIFXHOST
    Host Name: -> serverName
    But the URL is correct.
    jdbc:informix-sqli://myhost:1543/mydb:informixServer=ol_myserver
    Notice that the exception message says:
    Attempt to connect to database server (myhost) failed.
    AlphaHi. If the URL has a particular property value, then don't add the property
    redundantly in the pool's properties.
    Joe

  • Bug Report... Catalyst crashes when using type tool

    FC is crashing nearly everytime I use the type tool or import type from AI or PS. It happens after import when I select the text to modify. I am running FC Beta 2 and am on Mac OSX 10.6.1. (the properties panel under common blanks out (doesn't show anything ie. X:, Y: W:, H:, Etc...) right before it crashes.)

    Thought i'd post back here.. I think I have fixed the type tool issue in Catalyst. Since I am a designer by trade I had about 2500 fonts enabled on my machine... I usually dont have them all enabled but I just bought my new computer and didnt even think about it... so I disabled a good chunk, at least half, and the type tool is working fine so far.... it's only been about an hour or so since ive done it so, not sure if its 100% solution, but at least it has helped...
    Might want to check the amount of fonts you have enabled when working with catalyst... keep it to a minimum.

  • Generic method invocations with explicit type parameters

    If I interpret the JSR14 public draft spec (June 23, 2003) section 5.6 correctly the following method invocations with explicit type parameters should compile: package generics;
    public class G121 {
      void f() {
        this.<String>f2();
        <String>f2(); // compilation error
        <String>f3(); // compilation error
      <T> void f2() {
      static <T> void f3() {
    }but the class does not compile: jc -J-showversion generics\G121.javajava version "1.5.0-beta"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0-beta-b32c)
    Java HotSpot(TM) Client VM (build 1.5.0-beta-b32c, mixed mode)
    generics\G121.java:6: illegal start of expression
        <String>f2(); // compilation error
                ^
    generics\G121.java:8: illegal start of expression
        <String>f3(); // compilation error
                ^
    2 errors
    >A bug or do I miss something?

    I get this error:
    LineCount.java:104: cannot find symbol
    symbol : method <java.io.File>sort(java.util.List<java.io.File>)
    location: class java.util.Collections
    Collections.<File>sort( list );
    ^
    1 errorYou don't need the explicit type argument there, but anyway...
    If you look at the docs for Collections.sort(List<T> list) you'll see it is declared as:
    static <T extends Comparable<? super T>> void Collections.sort(List<T> list) Unfortunately, although File implements Comparable, it doesn't actually implement Comparable<File> or even Comparable<Object>, so I guess it can't satisfy the bound.
    You can get it to compile by removing the explicit type argument and casting to the raw type List, but that's not very nice.
    This seems like an oversight to me - File already has both int compareTo(Object o) and int compareTo(File pathname) so I don't see why it can't implement Comparable<File>. This isn't the only such case in the API though, so maybe I'm missing something.
    Mark

  • Using TM to reformat one (FAT32) partition on external HD

    Hi all,
    I'm wondering what others' experiences have been using TM's reformat feature on only one partition in a drive. In my case, I have a 400GB Seagate external HD that has been partitioned to one half HFS+ and one half FAT32. Now that my data analysis programs have all come out with mac support, I have finally said goodbye to the ole Windoze machine (yey!!). However I am still left with a hard drive that has been partially made compatible for my old PC.
    Right now, all music/docs/files/etc are stored on the FAT32 side of the drive, for the practical reason of TM needing HFS+. By default, the HFS+ side of the drive is then set up to be my TM location. Both my iBook and MBP see these as two separate HD's, and can read/write both.
    What I am trying to get to as an outcome is having 1/2 of the hard drive partitioned for all my music, documents, large files, etc. Another 1/2 should be exclusively TM backups. Although TM gives me the alluring option of just reformatting one half of this drive so that both separate partitions are HFS+, I just get goosebumps thinking of all the things that could go wrong. And while I have begun the process of backing up files (slowly) to A-drive, I don't want to lose those files just yet. So here are the questions:
    1. Has anyone ever been so brave as to reformat only one half of their hard drive (or one particular partition) with TM? Keep in mind my Mac sees it as two separate HD's.
    2. Any advice on whether I should simply keep all 70GB of my music/documents/pictures/etc on the FAT32 drive and leave the configuration as it is? I have heard rumors it's a little more unstable, but on the other hand it would be accessible from multiple operating sys if anything went wrong. I do access this regularly for iTunes, and plan to do so over an Airport Extreme/usb hub set up permanently. I have little to no need for windows compatibility, but I'm also lazy and want to have as simple of a set-up as possible. And, knock on wood, I got a Seagate specifically because of the long term stability. Am I flirting with disaster?
    3. I am repeatedly getting the error that I am not able to delete folders from the FAT32 side (My Music, My Photos, etc) because "You do not have sufficient privileges". Any ideas on how to get around that?
    I know the best option would be to backup everything by network/another external HD, and that is the long-term idea, but for now just wondering if FAT32 can be my permanent data access solution without any serious looming problems.
    Any advice on better sites than A-drive (www.adrive.com) for permanent, relatively inexpensive cloud storage would be much appreciated as well.
    Thanks for taking the time, appreciate any advice here.

    Ok, I finally understand.
    redhedhs wrote:
    I have a separate TM drive for the Intel Mac, so I'm focusing on having an Apple partition map for my iBook backups. Right now I have a successful partition to use for TM (let's call it TM DRIVE). And another for music, docs, etc (FILES DRIVE). FILES DRIVE is currently FAT32 formatted. I haven't had any problems with it, but I'm trying to figure out:
    a. If it's even necessary to reformat this to Apple partition if I'm not using it for TM (ie: what are the possible scenarios that would necessitate avoiding FAT32 for this?).
    Not necessary but I would recommend it. FAT32 has several limitations. For example, TM can not back it, up. the file size is limited. unix permissions don't work on it. if a file is locked you can't delete it from OS X and have to boot from windows to do it. Much better to use HFS+ if you are not going to use the drive with windows.
    b. If I do want to reformat just the FAT32 partition, is it likely/probable that I would erase the info on the other partition if I did so?
    No. It's quite safe to do so using disk utility. this has nothing to do with TM which threw me off.
    just select the FAT partition in disk utility and reformat it to HFS+ using the "erase" tab. this will of course erase everything currently on the FAT partition but will not affect the TM partition in any way. as i said, the operation is quite safe.
    Sounds like you're saying Disk Utility would be better suited for it, wondering if I should crosspost there? Either way, I wonder if I can just reformat one partition safely?
    Thanks!

  • How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.

    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • Volume erase failed: Media kit reports not enough space on device

    I was having problems with the external drive where I store my Time Machine backups, so I tried plugging and unplugging the drive (per earlier advice, and something that had worked in the past), but could not mount the drive. I ran Disk Utility and tried to verify the disk, which told me the disk needed to be repaired. I tried to repair the disk only to get an error message that Disk Utility could not repair the disk and it needed to be reformatted. So I tried to erase the disk with Disk Utility only to get the error message "Volume erase failed: Media kit reports not enough space on this device for requested operation". I am not sure what else to try at this point and could not find any similar questions here.
    The drive in question is a 3TB USB Seagate Backup + Desk Media, formatted as Mac OS Extended (Journaled). It's divided into two partitions, one of which (2.2 TB) holds only Time Machine backups of my desktop and laptop and the other of which (800GB) is formatted similarly with some files stored on it. I was able to verify and repair this other partition. I'm running Disk Utility 13 on an iMac (2.8 GHz Intel Core 2 Duo) running OSX 10.8.5
    Any suggestions for what to try next would be appreciated.

    Just to let you know I appear to have the *exact* same problem, even down to the 3TB hard-drive in question.
    I read recently that a time machine backup should have its own physical hard disk, not a separate partition on an otherwise-used disk. I wish I'd known that in advance of buying the external drive, as I would not have invested in a 3TB one if I had known I could only use it for Time Machine alone.
    Dianeoforegon does make a fair point, though, in saying that all backups in one place is asking for problems down the line.
    Incidentally, this Time Machine problem first started occurring when I upgraded to Mavericks. 9 times out of 10 my Time Machine partition would go corrupt for no reason. This definitely hadn't been happening at all before Mavericks. That same upgrade also killed off my entire Boot Camp partition, which caused me major headaches and I eventually had to simply reformat that partition and start again.

  • Imac mid 2007 with mac ox lion reformat with what os

    hi i have a imac mid 2007 and i have with mac os x lion with it and i wanna reformat it because its so slow what os do i will install again?

    You may just need to reinstall, not reformat:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Reformat to Mac -- Lose all videos?

    I made the switch from PC to Mac (which I love!) but it seems that getting my iPod to do it with me is causing some problems, so here's my dilemma (along with a lot of questions...)
    When I connected my iPod to my Mac, the computer recognized it but iTunes did not, prompting me to download an iPod update, which I did not accept because it prompted me to restore it to its factory settings since it was not Mac formatted. I did not want to do either because I have a few videos on it that I wouldn't be able to restore if I went with those options.
    However, the reason I have those few videos on my iPod is because a friend who uses a Mac put them on there for me using his computer. So if his Mac/iTunes could recognize my iPod plugged in, what am I doing wrong that mine can't?
    Does reformatting my iPod to Mac settings erase everything on my iPod? Is there any way to save those videos from my iPod to my computer? Or am I just going to have to suck it up and do without the videos?
    Thank you in advance for any help given, it will be much appreciated (even if it does turn out that I can't save these videos, I just need to understand all my other problems)

    Fixed on my own!

  • Reformatting Drive, Reinstalling OS 10.4

    I'm wiping several machines clean and then re-installing the OS on the clean drive. No crashes, just some weird behavior, slow performance and, well, it's time. Haven't done this in a while. So some pointers, refreshers, please?Of course all relevant user data, docs, etc. will be backed up and restored as it was. I'll install the OS from the original disks.
    *Reinstalling OS* - I'll install from the original disks (for 10.4), but then that version will be behind 10.4.11. Do I just go out to s-ware update and get the latest updates?
    *System & Library* - Do I have to back these up or will these just get restored from the OS install?
    Applications - I know it's not as simple as the really old way, where you can just grab apps from one drive and copy to another (sometimes it still works). But should I backup and restore the applications directory as well?
    *Users and Preferences, etc* - I'll copy the Users and associated files, but aren't preferences not part of that? Any way to capture that?

    Lee:
    I suggest that you begin with making a backup/clone of your Users or Home Folder. You can do this using SuperDuper, or just dragging and dropping. This will copy your data including your library with preferences etc. It will not copy you third party applications.
    Next follow this procedure to Reformat, the re-install:
    Formatting, Partitioning Erasing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    Boot from the install CD holding down the "C" key.
    Select language
    • Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select Partition tab in main panel. (You are about to create a single partition volume.)
    • Click on Options button
    • Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
    • Click OK
    • Select number of partition in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    • Type in name in Name field (usually Macintosh HD)
    • Select Volume Format as Mac OS Extended (Journaled)
    • Click Partition button at bottom of panel.
    • Select Erase tab
    • Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    • Check to be sure your Volume Name and Volume Format are correct.
    • Click Erase button
    • Quit Disk Utility.
    Installation Process
    Open Installer and begin installation.
    Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
    Optional: Check box to install X11 (Tiger).
    Proceed with installation.
    After installation computer will restart for setup.
    After setup, reboot computer.
    Go to Applications > Utilities > Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select First Aid in main panel.
    Click Repair Disk Permissions.
    Connect to Internet.
    Download and install Mac OS X 10.4.11 Combo update (PPC) (Tiger)
    Computer will restart.
    Repair Disk Permissions as previously.
    Go to Apple Menu > Software Update.
    Install all updates.
    Computer may restart after updates.
    Go to Applications > Utilities > Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select First Aid in main panel.
    Click Repair Disk Permissions.
    Good luck.
    cornelius

  • Can't connect after reformat due to virus

    Toshiba Satellite P105  Model: PSPA0U-1x001N   Windows XP
    I was infected with "anti-virus live"  I cleared it with a Malware program that was recommended on "bleepingcomputer"   but a day or so later could no longer connect to the internet.  I wiped my HD and reformatted with the factory disc to restore computer to factory settings.  Now I STILL can't connect to the internet.  I show an excellent wireless connection but still get "page not found". If I plug the cable in directly from the modem it says "limited or no connectivity" .  I know the modem works because when I plug it directly to this alternate laptop it works great.   I did all the troubleshooting possible with my ISP (Roadrunner) and they said its not an issue with them.  When I was starting the process of reformatting a pop up said "cannot erase file Windows/Drivers/Ew3BootseQ"   Is that a virus hanging on?  I am on a different laptop now btw.
    Any help would be greatly appreciated!!!

    Well no luck.   I'm back in the same boat.  Excellent signal strength but no internet.   I don't have Norton on now so I couldn't try that...
    I did another ping test ( again I have no idea what I'm looking for here)  but maybe it could mean something to some one on here?
    I'm going to type out my results since I'm using a different computer here so can not copy/paste.  I don't have the cable hooked directly to the router so that is why that is unresponsive but it doesn't work either even when it is connected.  Even though it works on this one fine.   But the wireless still says signal is excellent.  Anyway, here it is:
    Windows IP Configuration
        Host Name .............my host name)
        Primary Dns Suffix.....:
        Node Type...............:Hybrid
        IP Routing ENabled......:No
        Wins Proxy ENabled......:No
        DNS Suffix Search List...:dlink
    Ethernet adapter Local Area Connection:
        Media State...............:Media disconnected
        Description................:Intel<R> PRO/100 VE Network Connection
        Physical Address..........:00-16-36-D1-BA-40
    Ethernet adapter Wireless Network Connection:
       Connection-specific DNS Suffix. :dlink
       Description.........................:Intel <R> PRO/Wireless 3945ABG Network Connection
       Physical Address...................:00-19-D2-1E-77-16
       DHCP Enabled......................:Yes
       Autoconfiguration Enabled.......:Yes
       IP Address..........................:192.168.0.100
       Subnet Mask.......................:255.255.255.0
       Default Gateway..................: 192.168.0.1
       DHCP Server......................: 192.168.0.1
       DNS Servers.......................: 192.168.0.1
    Documents and Setting........>ping 00-16-36-D1-BA-40
    Ping request could not find host 00-16-36-D1-BA-40.  Please check the name and try again.
    Documents and Setting........>ping 00-19-D2-1E-77-16
    Ping request could not find host 00-19-D2-1E-77-16.  Please check the name....
    Does anything seem like an obvious issue that would keep me from accessing the internet?

Maybe you are looking for

  • Have a 2008 iMac 24".  How to convert from mini-DVI to mini-displayport?

    I bought this awesome device recently: http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=6331&seq=1&format=2 It takes the TOSLINK audio output and the minidisplayport output and combines it into HDMI to use in a home

  • Cant set status released for Generation Variant for report category IBD_MSD

    Dear EH&S people, I am trying to upload a vendor MSDS'. I am not succesfull in this. The reason is that the status of the generation variant is not "Released". I am not able to set the status released in the Generation variant. I am using report cate

  • User defined func: Unavble to merge two arrays in result list

    Hi I am trying to merge two arrays on the basis of "FEE" element in the input file; Actually there is an Attribute Name and Value pair array coming in the input file which has 5 pairs already(Notification + 100 , oversize + 8 etc.) see example below;

  • How to set font in StyleConstants class??

    Font Style should be int, in new Font(string fonta,int Style,int Size) fonta is like "RomanC", Style is like 1 --"underline",Size is like 12 StyleConstants.setFontSize(lAttr, int Size); StyleConstants.setFontFamily(lAttr, String fonta); fonta is a St

  • Customizing inconsistency(Contact your system adminstrator)

    Hello Experts, I have created thread in asset accounting forum but got rejected again and again.The issue was recently i have maintained the low value asset max value,but the issue is my Development client OB22 currency sttings (10 company code curre