BUG report about Spry.Effect.Highlight

When the Spry.Effect.Highlight effect is not accomplished,
and click the trigger link, will report the error "startColor
undefined".

Can you please elaborate? Which "trigger link" do you mean?
Are you using the Spry 1.4 release?

Similar Messages

BUG REPORT: About Util.arrayFillNonAtomic in jcwde.jar

Hi, I think i get a bug about Util.arrayFillNonAtomic,
for example:
offset = 0;
offset = Util.arrayFillNonAtomic(myData,offset,(short)5,(byte)0);
offset must return 5, but in PC simulator(like used eclipse+junit+jcwde.jar+api21.jar) return is 4 ?�Idownload the applet into java card , return is 5.
here is why error:
the code Util.arrayFillNonAtomic in jcwde.jar is :
public static final short arrayFillNonAtomic(byte bArray[], short bOff, short bLen, byte bValue)
throws ArrayIndexOutOfBoundsException, NullPointerException
byte tester = bArray[bOff];
if(bLen < 0)
throw new ArrayIndexOutOfBoundsException();
while(bLen-- > 0)
bArray[bOff++] = bValue;
return (short)(bOff + bLen);//error. must return bOff,not bOff+bLen!! here bLen = -1.
rgds

bouye wrote:
Thanks for the suggestion and let's hop they put some process to prevent similar issues from hapening again in the future.False hope. Programming is hard, release management is hard, testing is hard, people make mistakes, budget restrictions cause mistakes to slip through, etc. etc.
The most important factor in all this really is us and more specifically our willingness to properly report problems.

Bug report about Erase Application from disk

Hi,
Steps to reproduce this problem :
- only jdev11tp2 opened in Windows
- create a new Application Workspace
- from the 'Application Menu' icon, choose 'Erase Application from disk'
==> the Application directory is remove from IDE but not erased from disk.
If you attempt to delete the workspace directory from windows, you get an error message (as if there are opened files) : "Cannot delete applicationXXX : access is denied. Make sure the disk is not full or write-protected and that the file is not currently in use"
==> You must leave Jdev for deleting the workspace directory thanks to windows.
Other problem :
if the workspace is created via a checkout (for a given revision) from a subversion's repository, if you try to erase this workspace with 'Erase Application from disk', you can't (like above) but moreover even if you leave Jdev !
==> you must close the windows session
Regards,
Christophe,

Hi,
don't know for the second issue, but the first is well known and a bug is filed already. I would assume that the outcome of this bug resolution also resolves your second issue
thanks for reporting
Frank

Bug report about create new footprint with Rounded rectangle in 3D info Bottom

I create new footprint with rounded rectangle in 3D info Bottom,the rounded rectangle must be in bottom,but In fact,the rounded rectangle
created in top layer.i think it's wrong.
I used ultiboard 10.1.357.

Hi,
Thank you for reporting this. This has been a long standing issue with Ultiboard and we are looking into resolving this.
There is a work around although a very inconvenient one. You can set the height to what you require and use a negative offset to move the shape to the other side of the board. The 3D shape will appear on the other side, but in reality is just shifted, not mirrored.
Hope that helps. We apologize for the inconvenience.
Yi
Software Developer
National Instruments - Electronics Workbench Group

JDeveloper 10.1.3 EA1 bug reports?

Is there any place to file bug reports about JDeveloper EA1? Or just start a thread here?
Anyway, the JDev JSF designer says f:facet cannot be inserted into h:panelGrid, but actually that's how to add header and footer elements into a panelGrid.

If f:facet is added to f:subview an error does not get generated.
<f:view>
<h:panelGrid>
<f:subview>
<f:facet name="facetPanelGrid"/>
</f:subview>
</h:panelGrid>
</f:view>
f:facet in h:panelGrid is also valid, the component palette generates an error:
<facet/> may not be added.
<f:view>
<h:panelGrid>
<f:facet name="facetPanelGrid"/>
</h:panelGrid>
</f:view>
Also <:subview/> id does not get set; an error :String index out of range:0 gets generated.

FAQ: How do I submit a bug report or feature request or otherwise give feedback about Premiere Pro?

The best way to submit a bug report or feature request is to use the bug-report/feature-request form.
The Premiere Pro team doesn’t necessarily see and record every post on every forum and social network, but we do see, record, and track every entry through the the official feature-request/bug-report form.
It also helps a lot if you opt into the Product Improvement Program.
Also, be sure to use the crash reporter.
We really do read all of the bug reports and feature requests, and the software really does get a lot of benefit from detailed crash reports.
Don’t forget about contacting Adobe Technical Support or Customer Service, too. For information on how to contact Adobe Technical Support, see this page. (Note that you must register your product before you can open a technical support case for it.)
If you have tried to get help from our support staff, but the service was inadequate, I can help you to escalate your issue if you send me your case number at kopriva at adobe dot com. You must provide me a case number. I am not offering to solve your problem myself; rather, I am willing to forward your information to someone if you have already hit a dead end with our Technical Support or Customer Service.
If you have feedback about the content of the Premiere Pro Help document, then please add a comment at the bottom of the relevant page. You can add comments to add information, to add links, to make corrections, or to ask for clarification.
If you want to keep up with the Premiere Pro team, then you can follow our blogs, Facebook page, and Twitter feed and so on.
Oh, and I can’t resist this opportunity to remind you to update to the most recent version of the application. Don’t be surprised when the first thing that you hear back from us is that you need to install the latest updates. We fix a lot of things in updates, and we don’t want to go chasing bugs that we’ve already fixed. We’ll keep you posted on our blogs, Facebook page, and Twitter feed about updates as they become available.

Hi qwerty,
Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

What about a bug reporting mechanism?

Dear SONY developers an users,
the overview of the forum indicates that the software of our phones has some bugs. This is normal - no software is bug-free.
The best known solution in such cases is to introduce some bug reporting and tracking mechanism.
What do you think about it?
B.r.
Glorifyday
Solved!
Go to Solution.

I think this idea has been posted before and it was forwarded internally. I haven't heard anything about it since so I don't know anything about what happened but I'll send it again
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How do I send a bug report to Apple about iPhoto?

1) Okay this is probably very basic but I'm trying to find a way to send a bug report to Apple about the problems I'm having with iPhoto and PE since downloading Quicktime 7.1.3.
Can anyone help?
2) Is there any way of finding out if Apple are onto this problem with Quicktime 7.1.3?
3) I've also asked on another thread how I can uninstall Quicktime 7.1.3 and re-install 7.1.2. (the reinstaller for 7.0.4 doesn't work on my computer) but so far I haven't got a reply.

(1) While running iPhoto, click on the "iPhoto" menu and select "Provide iPhoto Feedback".

Bug report and question about 2.0

ok I have 2 things I need to post about. First is a bug report.
Under settings, brightness category the slider does not function correctly. It refuses to slide like it did in 1.1.4.
Second the capacity has dropped from 14.84GB to 14.6GB. What is taking up 240 MB of space?

thanks for info. Sorry I didn't post this earlier but the slider has corrected itself. Also the is probably being used by the os

Did you know that Google toolbar doesn't work properly in FF rc1? I have filed a bug report to Google about this

The Google toolbar doesn't recognize a left mouse click when selecting a 'suggestion'. It's OK using the keyboard, however. I have filed a bug report with Google, but as this is an important extension thought you should know.

See also: http://forums.adobe.com/message/4662367#4662367
-Noel

How about fixing the bug report submission page ?

I've been trying for I think the 11 time to submit a bugreport to bugreport.sun.com and each time,
the submission FAIL. And of course you loose everything you entered in the page.
Email to the address specified when it fail also FAIL.
rejected by the server for the recipient domain sun.comby userp1020.oracle.com. [156.151.31.79].
The error that the other server returned was:
550 5.1.1 <[email protected]>... User unknown
Please Fix, a bug report page that can't even submit simple text its ridiculous.
This is not the first time I have difficulties getting your site to work.

You're complaining to the wrong people.
Re: bug database does not work?
OTN forum admin are not responsible for the java bug reporting. They cannot fix what isn't theirs.
Locking this thread

Bug report status

Hi, I have previously highlighted an issue with the Xperia C3 D2533 running 5.0, where the back camera is producing low quality images.This is from the Galaxy Note 1 While this is from the Xperia C3 What is appaling is if you zoom in, the N7000 has more detail than the C3, whereby the C3 just paints over the colours unscrupulously giving jagged edges obvious from the USB. I have sent an email to support and received a reply saying it has been forwarded to the developers about two weeks ago. I have heard that the Lollipop 5.1 is coming out in July and am curious as to whether the camera issue has been confirmed as a bug by the developers and are currently looking into it, hopefully rolling out the update with the fix as well. Edit: I have done a software reset and a repair via PC Companion using the steps recommended. The PC Companion told me there are no available updates or softwares for this phone. Therefore to sum it up, what I would like to know is a confirmation on the status of this report among the devs and whomever it may concern in the troubleshooting phase.

Seems like a search of the bug report submission
queue would be useful.Use this:
http://developers.sun.com/contact/feedback.jsp?referer=http://forum.java.sun.com&category=sdn&mailsubject=Forums%20or%20Community
It's as pointless as any other measure in getting Sun to do what you want. ;)

Spry effect "slide" won't reappear

Hello DW users, I recently made and uploaded a simple HTML
page to test out spry effects on text and images. If you view the
page at
http://student.santarosa.edu/~dnorth/hmwk1.html
you can see what I'm talking about. Everything works fine except
for the "slide" effect. It is set to toggle in its dialogue box,
but doesn't work like i expected it to. When you click on it, it
slides away and disappears. When I click back in the same area, it
doesn't reappear as I expected it to. I can only get it to come
back if I hit the page refresh button. any suggestions?? Thanks,
Deborah North

Just so you'll know, it never makes sense to remove a valid
and complete
doctype.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"dnorth" <[email protected]> wrote in
message
news:fne0qe$kqn$[email protected]..
> Hi Teresa, thanks for the info. I've been working on it
and I got the
> slide
> effect to work only while linking it from a text link,
not directly from
> the
> image itself. It still has problems as you can see if
you go back to the
> link.
> I'm wondering if the slide effect has some bugs to make
it work in this
> manner.
> Maybe I need a hack. I tried removing the Doc Type as
you suggested, but
> that
> still didn't fix things. Who knows. I really appreciate
your time and
> suggestions on this problem. Please go back to the page
and hit refresh if
> you
> have the time.
http://student.santarosa.edu/~dnorth/hmwk1.html
>
> Thanks again, Deborah
>

Solaris8 and 9 (possibly 7) /dev/poll driver bug report.

Hello,
I'd like to report a bug in the solaris 8 and 9 /dev/poll driver (poll(7d)).
As i do not have a support account with sun or anything like that, there
seems to be no other way to do that here (which is of course a very sad
thing).
Bug details:
The /dev/poll device provides an ioctl-request (DP_ISPOLLED) for checking
if a particular filedescriptor is currently in the set of monitored
filedescriptors for that particular /dev/poll fd set (open /dev/poll fd).
A quote from the documentation of the poll(7d) manual page taken from
Solaris9:
"DP_ISPOLLED ioctl allows you to query if a file descriptor is already in
the monitored set represented by fd. The fd field of the pollfd structure
indicates the file descriptor of interest. The DP_ISPOLLED ioctl returns 1
if the file descriptor is in the set. The events field contains the
currently polled events. The revents field contains 0. The ioctl returns 0
if the file descriptor is not in the set. The pollfd structure pointed by
pfd is not modified. The ioctl returns a -1 if the call fails."
It says that when you query for an filedescriptor which is currently being
monitored in the set, that it would return 1, and change the events field of
the pollfd structure to the events it's currently monitoring that fd for.
The revents field would be set to zero.
However the only thing which actually happens here, is that FD_ISPOLLED
returns 1 when the fd is in the set and 0 if not. When the fd is in the
set, when FD_ISPOLLED returns 1, the events field remains unmodified, but
the revents field gets changed.
A small sample code to illustrate:
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/devpoll.h>
main() {
struct pollfd a;
int dp_fd = open("/dev/poll", O_WRONLY);
a.fd = 0; /* stdin */
a.events = POLLIN; /* we monitor for readability, POLLIN=1 */
a.revents = 0;
write(dp_fd, &a, sizeof(a));
a.fd = 0;
a.events = 34; /* filled in with bogus number to show malfunctioning */
a.revents = 0;
printf("DP_ISPOLLED returns: %d\n", ioctl(dp_fd, DP_ISPOLLED, &a));
printf("a.fd=%d, a.events=%hd, a.revents=%hd\n", a.fd, a.events,
a.revents);
According to the documentation of /dev/poll and namely DP_ISPOLLED this
program is supposed to print the following:
DP_ISPOLLED returns: 1
a.fd=0, a.events=1, a.revents=0
However it prints the following:
DP_ISPOLLED returns: 1
a.fd=0, a.events=34, a.revents=1
You can take any number instead of '34' and it will simply remain untouched
after the DP_ISPOLLED ioctl-request.
I hope it's clear now that the solaris8 and solaris9 (and probably solaris7
with /dev/poll patch too) DP_ISPOLLED implementation is broken.
This bug is also easily illustrated by looking at the solaris8 kernel sourcecode:
<snippet osnet_volume/usr/src/uts/common/io/devpoll.c:dpioctl()>
case DP_ISPOLLED:
pollfd_t pollfd;
polldat_t *pdp;
if (pollfd.fd < 0) {
mutex_exit(&pcp->pc_lock);
break;
pdp = pcache_lookup_fd(pcp, pollfd.fd);
if ((pdp != NULL) && (pdp->pd_fd == pollfd.fd) &&
(pdp->pd_fp != NULL)) {
pollfd.revents = pdp->pd_events;
if (copyout(&pollfd, (caddr_t)arg,
sizeof(pollfd_t))) {
mutex_exit(&pcp->pc_lock);
DP_REFRELE(dpep);
return (set_errno(EFAULT));
*rvalp = 1;
</snippet>
its' clearly visible that the code writes the current monitored events to
the revents field:
'pollfd.revents = pdp->pd_events;'
and that it doesnt set revents to zero.
It's funny to see that this has been like this since Solaris8 (possibly 7). That means nobody ever used DP_ISPOLLED that way or people were simply to lazy to file a bug report.
Another funny thing related to this. is that Hewlett-Packard did seem to know about this. Since HP-UX11i version 1.6 they also support /dev/poll. From their manual page i ll quote some sentences from their WARNING session:
"The ioctl(DP_ISPOLLED) system call also returns its result in the revents member of the pollfd structure, in order to be compatible with the implementation of the /dev/poll driver by some other vendors."
Hopefully this will get fixed.
I also like to reexpress my very negative feelings towards the fact that you're not able to file bug reports when you do not have a support contract. Ridiculous.
Thanks,
bighawk

Have I mentioned how much i love my playbook now Great job on os 2.0

Bug report: Naming a Bin after creating it with drag'n'drop

There seems to be a small bug when giving a newly created bin a name after creating it by drag'n'drop of several clips onto the "New Bin" icon.
To reproduce:
Select some clips in your project browser
Drag them onto the New Bin button
A new bin is created with the clips in it
- the bin name for it appears to be selected, and editable - just as if you had created a new empty bin by clicking the New Bin button
- type in a new name - it accepts the name fine, now press enter.
- your new name disappears, and *now* you are really in the mode to edit the bin name
- type your name again, and it works.
Work around:
When creating new bins by using drag'n'drop of clips onto the New Bin button, first press enter once to enter into the proper edit mode before giving the bin a new name.
(is there a better place to file bug reports?)
Version 6.0.1 (014 (MC: 264587))
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache (per core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MP51.007F.B03
SMC Version (system):          1.39f11
SMC Version (processor tray):          1.39f11
OS X 10.6.8

Er, just answered my question about bug reports by reading the "read this before posting" link above
But I'll leave this here for the work-around in case anyone else needs it.

BUG report about Spry.Effect.Highlight

Similar Messages

Maybe you are looking for