Bug report: import button shows incorrect state for Photo CDs

When inserting a Kodak Photo CD, a graphic of a CD instead of the array of photos appears (that's fine).
The button in the lower right portion of the window says "Stop Import". When pressed with the mouse, import begins. If pressed during the import, importation stops. While the behavior is correct, the button should say "Begin Import" and then change to "Stop Import".
MikeR

this is user to user forum - if you need to report an issue to Apple use the iPhoto feedback under the iPhoto menu
LN

Similar Messages

Normal State Button Shows Selected State At Loop Point

My menu shows the Normal State Button Shows as the selected state At Loop Point. I want it to show for instance black until it is selected then "rollover" to red. TIA for any help.
Murman

There are two ways that you can do this without resorting to using a layer based shape or a layer based menu.
First, you need to decide if it is important for the logo to appear in full colour or if you can get away with a single colour instance of it appearing. If the answer to this is that a single colour is OK, then use a standard overlay menu. Otehrwise, try using a masked overlay menu (there are limitations...)
With a standard overlay, the background image is as you want it to appear without anything selected - all shapes and text, etc, should be in place as if no button is chosen.
You then create the overlay, which is a simple .pict file that is the size of the menu. On this you simply place as many instances of the logo as you need - create them in black or grayscale and don't add anything else. The overlay will be mostly white with the black or gray shapes on it.
Add this to your menu in DVDSP and drag out the button rectangles to cover the background text and the overlay shape. When the button is selected, the logo shape will show up, but will not show in the normal state.
You can get the logo to be whatever colour you need by using the colour mapping within the property inspector for the button.
If you definitley need a full colour logo to appear, you can either use a layer based photoshop menu, or use overlay masks:
http://www.editorsbin.com/authoring/mask_overlay.html
be aware that there are some limitations when using the masking technique - but all is explained in that tutorial.

Bug report syncing TV shows to iPad

I have just updated to iTunes 11 on my Mac running Lion 10.7.5 and am trying to mannually sync TV Shows using the cable to my iPad3 running IOS 6
I connected the iPad and get the new button showing the device.
clicked on the button and enter the sync menue
on every tab if you scroll in the pane the scroll tab appears on the right and you can scroll through the rest of the list that is not visible.
in the TV Show tab when i click in the pane to manually select the shows i want to sync and try to scroll the scroll slider never appears and i cannot see the rest of the availible shows.
if i click with the down arrow i can select them though without seeing them so i know they are there.
is this just me or is this a bug? if it is a bug how do i report it?
I seem to be in the minority here but i like the new look, it just takes a bit of getting used to.
Thanks in advance.

This looks like a bug in the new version of iTunes. I have this problem too. Seems to just be poor QA on Apple's part. I'm surprised they missed this as its a pretty obvious problem. Anyways, not much we can do other than wait for Apple to release a new fix for iTune :-/.

Home Sharing Problem: Import Button & "Show" Dropdown menu are missing?

Hi Everyone,
My wife and I are both running iTunes on Macbook Pros and we are both logged into eachother's iTunes libraries through Home Sharing accounts. However, the Import button on the bottom has disappeared, so has the "Show" dropdown menu that is typically to the left of the Import button on the bottom of the screen when you are in the other person's Music Library. The Show dropdown memu typically displays the options: All and Not in Library. We can play and listen to each other's music, however we can't Import songs. Can anyone help me troubleshoot this problem??
Thanks,
Patrick

To clarify as I have this problem repeatedly here is the description and the cure.
Sharing is enabled in the sharing tab. Other computers can see this computers library but cannot import. The icon for the home sharing doesn't show the "house" - it just shows some musical notes.
This means that home sharing is not enabled. JUST SHARING.
In Itunes 11 use: File/Menu/Home Sharing/Turn on Home sharing.
But you are not done.
When home sharing shows up now in the left panel - click it. The right panel will present a sign on for your apple ID. Sign on and enable home sharing.
Then you will be able to import form the target computer again.
It gets disabled with OS upgrades and sometimes with iTunes updates.

3750 - show platform - stats for stack member and ring ?

From the sh platform port-asic stats drop command, we are able to see the drop stats for the master switch.
Question 1: how can we see the same stats for the stack member ^
Question 2: Is that possible also to consult the drop stats for the 2 x ring. If yes - what the command ?
Thanks

You manage the switch stack and the stack member interfaces through the stack master. You cannot manage stack members on an individual switch basis. You can connect to the stack master through the console port of one or more stack members. Be careful with using multiple CLI sessions to the stack master. Commands you enter in one session are not displayed in the other sessions. Therefore, it is possible to lose track of the session from which you entered commands.
This URLs should help you:
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_command_reference_chapter09186a0080395b55.html
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_command_reference_chapter09186a008017f8b8.html

Import dialog shows iPhone twice, and photo list only shows outlines

In Aperture 2.1.2 I have been able to import photos from my iPhone until just recently. Now the import dialog shows three choices of import devices/locations, Local Disk, RJH iPhone and a second RJH iPhone. If I select either iPhone the main window displays outlines of 7 images but no picture information except for the filename. If I actually try to import the pics it says 'Import completed with errors, the following files were not imported' and it lists all the filenames. One of the iPhone devices shows up in the import list EVEN WHEN THE iPHONE IS NOT CONNECTED!
I'm sure there is a plist or something that has the list of import devices bu I have not been able to find it despite extended web and support searches.
Anyone heard of this?

OK, I have since discovered that the second iPhone device is listed only when my iPhone is plugged into a DIFFERENT USB port on my MBP. If I plug it into the same port I usually use, it is only listed one. However, both Aperture and iPhoto still see one iPhone device whether it is plugged in or not, and both show images with outlines only and won't import photos. So strange

Reports and Console Show Different Information for Compliance

Hello,
Could someone enlighten me as to why for a specific Software Update deployment group I should see different compliance figures when I look at the deployment status in the console and when I run a Software Updates - A Compliance report?
For example for a recent batch of updates sent out I get the following figures from the Monitoring > Deployments part of the console; Total Assets 4,239, Compliant 2821, In Progress 37, Error 14, Unknown 1367.
If a run a report for the same batch of updates I get; Total Assets 4,238, Compliant 3343, Non-compliant 725, Unknown 170.
I suspect the difference might be due to a change having taken place for the set of updates e.g. Microsoft changed one of the updates to expired etc. and this has caused the clients to have to check their compliance status again.
What changes to an update that is part of a deployed update group would cause clients to have to check their compliance again and why would the report be different to the console?
Thank you for any help / advice.
Stephen

Hello,
I would be interested to know how the two different ways of looking at what should be roughly the same data can show quite different stats. At the moment for one deployment of software updates the Deployment Status pie-chart tells me that 3,006 clients are
compliant but the report tells me that 3,360 are compliant.
What seems to have happened is that an update that is part of the deployment changed its status so that the clients are having to check their compliance status again. This is slowly happening and I can see on the Deployment Status pie-chart the number of
compliant clients is slowly going up but on the report the compliant number seems to have remained high almost as if the need for the clients to re-check their compliance has not been taken into account.
Thanks.
Stephen

Crystal Report does not show the webelement for SAP System

Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.
Regards
Hemalatha J

Hi,
We have the same problem, did you find the final solution?
Thanks in advance
Regards.

IPhoto displays incorrect dates for photos imported from iPod

I recently purchased the iPod Camera Connector for use with my 4G iPod with color display (iPod Photo). I took a few pictures on my Canon SD110 digital camera and used the Camera Connector to copy the pictures to my iPod. I then plugged the iPod into the computer, opened iPhoto, and imported these pictures from the iPod. All of this worked without a hitch.
However, I noticed that the roll of images that iPhoto created is dated incorrectly (it says 12.31.2000). The photos themselves have the correct date (5.21.2007) but the incorrect time (3:15p instead of 6:15p).
My camera, computer, and iPod are all set to the correct date and time. Any idea what's causing this? It's not a particularly big deal as I can just change the dates on the rolls to match what the photos say (and adjust the times on the photos to be 3 hours ahead), but I shouldn't have to do this if all of the date/time information is set correctly.

All photos from the My Photo Stream go into a monthly Event. If you sort your Events by Date - Descending the most recent Events will be at the top of the Event window. The monthly Events will look like this:
OT

Bug report: Old threads showing up at the top of the list

As a professional web developer I must say that these forums are a disgrace. I wouldn't dare sell such a product.

It happens when a spam post is removed, as in the Catering thread, http://forums.adobe.com/thread/285152?tstart=0, in the Print Design forum, http://forums.adobe.com/community/design_development/printdesign?view=discussions&start=0, where it topped the list for a while with a 1 year old post by Neil after my reporting.

"Date picker" in report - - View source shows no label for the date picker

Hi
In one of my reports, I am using multiple types (textarea/text/date picker/select list)
I wanted to use a javascript based on the label, but I do not see "<label>" for Date picker in the view source due to which my Javascript fails.
Snippet of view Source:
<td class="t3data" ><label for="f08_0001" class="hideMe508">CATEGORY</label><textarea name="f08" rows="4" cols="16" wrap="VIRTUAL" id="f08_0001">EMPLOYEE INDUCTION</textarea></td>
<td class="t3data" ><span class="lov"><input type="text" name="f11" size="15" maxlength="2000" value="29-FEB-08" style="padding-right:5px;" id="f11_0001" /><script type="text/javascript">
As you can see above, we have a "label for" for the text area but not for the date picker
Is there a reason for the same?
Thanks
Nitin

Hi,
OK - the headers attribute should also help as these will identify the correct cells. You would need to know the html tags used within each cell for each datatype.
Would using cloneNode help you? It's a method of creating a copy of an entire row in a single instruction
Andy

Report S_ALR_87012357 not showing VAT amount for directly entered FI items

Hello experts,
In our system, the VAT and sales amount are calculated in another system (not ERP)
The VAT amount together with sales amount is transferred to FI via the standard iDoc ACC_DOCUMENT03
The problem that occur is that the report S_ALR_87012357 cannot calculate/display the VAT for such FI documents.
When posting FI document in FI, this is not a problem, then VAT is displayed correctly in S_ALR_87012357
How can we get around this problem?
Is is even possible with iDocs?

I'm not sure this is still an opne issue:
You need to to use:
This works with deductible VAT
first:
E1BPACTX09 to create VAT item
fields for EU on USA diferent fields are used
ITEMNO_ACC
GL_ACCOUNT
TAX_CODE
TAX_RATE
and
E1BPACCR09 for values
ITEMNO_ACC
CURRENCY
AMT_DOCCUR
AMT_BASE

Bug report: Wrong As Shot White Balance for Nikon D50 NEF in Camera Raw 7, Lightroom 4

For Nikon D50 cameras Adobe Creative Suite 6 does not read "As Shot" white balance data whether it's specified or not. It defaults to "Automatic". We have the problem only for Nikon D50 and only in Photoshop CS6, Adobe Camera Raw 7.3 and Photoshop Lightroom 4. (Not in CS5. Not for Nikon D5100 or D7000 or Canon S95) .
There is a more detailed posting at photoshop.com.
Lightroom 4.2 / ACR 7.2: WB "as shot" does not read the WB of Nikon D50 NEF, defaults to "automatic"
http://phtshp.us/10utPuk
phtshp.us/10utPuk

Moving the discussion to PS Forums

Report is not showing a prompt for a Charactorstic Filter Drill Down..!!

Hello Experts,
Recently my project was enhanced with some more new project and mixed it with my project.
Now my issue is before my new project was mixed into this project. We have the option..when a material drill down we come to see the Filter window.
In that my old project, for the users comfortability and for knowing to users that there are more than 200 materials avaialble like that..in that filter they put one prompt message " has more than 200 values ".
But after mixing up the enhanced new project, now..we are unable to see the above prompt message in Filter window..when material drill down.
User requirement is to again users need to see that kinf of prompt in the materils drill down filter window.
Requesting you , please reply me if any body faced this kind of issue in your projects or come to know from ur end.
Thanks,
SN.

Hi,
This Prompt message would have been set in WAD(XHTML Coding section) in your old project. Now , you cross check your Web template for the same. Your issue will be resolved.
Regards,
Suman

Bug report: import image failure

When I try to import images (formatted as either .gif or
.jpg) some fail to load and a blank outline of the appropriate
dimensions appears. Images that fail to appear have been set to
grayscale and/or RGB, and have a file size less than 200 KB.

We are currently investigating this issue and will update
shortly.

Bug report: import button shows incorrect state for Photo CDs

Similar Messages

Maybe you are looking for