Bug when adding a af:image into a ADS enabled table

This looks like a bug, but wanted to check with others to see if they had seen it.
Enable MDS with a column in a table
For example:
<af:table value="#{ContactCollectionBean}" var="row" id="t2" horizontalGridVisible="false" verticalGridVisible="false"
width="300" columnStretching="column:c3">
<af:column sortable="false" headerText="User Name" id="c2" width="100">
<af:outputText value="#{row.displayName}" id="aot1"/>
</af:column>
<af:column sortable="false" headerText="Status" id="c3" noWrap="false" width="200">
<af:outputText value="#{row.status}" id="aot2"/>
</af:column>
All works fine (row.status gets updated when new events are pushed.
Now enter a af:image tag as a new column or as a new element in an existing column.
The value getting updated now changes to be the displayName. It looks like it gets confused by the af:image and on update does the column "one" to the left of the column it should...

Hi,
the update of the table is by the index of the attribute. So if the image also is part of the row object then this should work
Frank

Similar Messages

When I drag an image into IBA, it rotates 90 degrees.

I'm having trouble dragging a particular image into iBooks Author. I took a picture and imported from my camera to iPhoto. The image had to be rotated 90 degrees, which I did in iPhoto. I'm using the "Contemporary" template in iBooks Author and I'm trying to drag my image from iPhoto to replace the red, space themed image at the top of a section page. When I do so, the image reverts to its original instead of the rotated form. I can't figure out how to rotate the image without rotating the mask.

Hello Abram1,
Not sure of the reasons but I would imaging it might have to do with iPhoto and its non destruction approach to editing.
Have you tried exporting the image out as a new image that would then have the new rotation that you wish applied to it.
I hope this helps,
Regards,
Nigel

Using Pages 5.2.2: When I drag an image into my document, I lose the related text. I can crop the image, make it smaller, but it is surrounded by blankness that overrides the text. Help?!

Using Pages 5.2.2, MacBook Pro, OSX 10.9.5: I cannot drag an image into my document without it obliterating the text. Even after re-sizing, the image just becomes small inside a larger blank area that appears to cover the saved text. Help?

Using Pages 5.2.2, MacBook Pro, OSX 10.9.5: I cannot drag an image into my document without it obliterating the text. Even after re-sizing, the image just becomes small inside a larger blank area that appears to cover the saved text. Help?

Problem by adding one spatial column to the version-enabled table

Hello, I'm trying to modify one version-enabled table T1 like this:
--table definition
create table T1
(ID NUMBER NOT NULL PRIMARY KEY,
NAME VARCHAR2 (256),
FUNCTION VARCHAR2 (256));
--enable versioning
EXECUTE DBMS_WM.EnableVersioning('T1','VIEW_WO_OVERWRITE');
I'd like to add one spatial column to this table by:
-- modify metada view for spatial indexing
INSERT INTO USER_SDO_GEOM_METADATA (TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
VALUES ('T1_LT', 'ANCHOR',
MDSYS.SDO_DIM_ARRAY
(MDSYS.SDO_DIM_ELEMENT('X', 0.000, 100000.000, 0.0005),
MDSYS.SDO_DIM_ELEMENT('Y', 0.000, 100000.000, 0.0005),
MDSYS.SDO_DIM_ELEMENT('Z', -100, 1000, 0.0005)) , 81989002);
-- table modification - add a column and create a spatial index
EXECUTE DBMS_WM.BeginDDL('T1');
ALTER TABLE T1_LTS ADD ("ANCHOR" MDSYS.SDO_GEOMETRY);
CREATE INDEX T1_SPX on T1_LTS(ANCHOR) INDEXTYPE is MDSYS.SPATIAL_INDEX;
EXECUTE DBMS_WM.CommitDDL('T1');
By finishing of the DDL operation with EXECUTE DBMS_WM.CommitDDL('T1') I get an error message:
"SQL> EXECUTE DBMS_WM.CommitDDL('T1');
BEGIN DBMS_WM.CommitDDL('T1'); END;
ERROR at line 1:
ORA-20171: WM error: 'CREATE TABLE' and 'CREATE SEQUENCE' privileges needed.
ORA-06512: at "SYS.WM_ERROR", line 342
ORA-06512: at "SYS.WM_ERROR", line 359
ORA-06512: at "SYS.LTUTIL", line 8016
ORA-06512: at "SYS.LT", line 11925
ORA-06512: at line 1
What is wrong here? The Oracle 10g DB is installed on Windows 2003 Server, OWM_VERSION - 10.2.0.1.0.
Regards,
Viktor

Hi,
You need to explicitly grant the create table and create sequence privileges to the user owning the table. It is not enough for these to be granted by using a role. This restriction is documented in the user guide.
Also, you should add the entry in the user_sdo_geom_metadata view on the t1_lts table, which is the table to which you are actually adding the geometry column, after calling beginDDL. CommitDDL will make the necessary changes, which in this case would be to add an entry for both t1 and t1_lt.
Regards,
Ben

Unusual Bug when creating pdf from image files

Hi I have a very mindboggling problem which I cant seem to get my head around.
basically I am trying to create a pdf using a large amount of image files, these images are scans of pages of a book. so I have been trying to create a pdf file from these images, and everytime i try, it all looks ok except for one page which comes up smaller in size than the rest which is a big problem and very unusual. If I change the view of acrobat so that it shows two pages at a time then this is clearly visable where one page is normal and the page next to it is like a third of the size. Ive checked the image file properties for that page and they are more or less the same as the rest, the dimensions of the image file too, but when I add it into a PDF it seems to shrink in size, any ideas as to why? any help would be much appreciated! (and I hope what I said made sense lol )
Thanks
Nav

Hi Davew000
Can you please tell the steps you are doing to create the PDF ?
Thanks,
Tanvi

Bug when importing existing mp3's into Library?

Hey All-
Hopefully this is an easy problem to fix! I just imported my entire mp3 collection which on my HD labeled like this:
D:\mp3\Artist - Album\01 - Track Name.mp3
... and so forth. I have spent alot of time making sure all my tags are correct; each mp3 has ID3v1 and ID3v2 Tags which are synchronized.
When I import this folder; D:\mp3 into iTunes it correctly displays the Artist and Album information, but it screws up the Track Name. Instead of showing the Track Name only in the browser view, it shows:
Artist - Track Name
Interestingly enough, when I play a file, the iTunes then recognizes the Track Name properly and resets the view to the proper Trackname only.
Here is a picture which accurately shows the problem:
http://img418.imageshack.us/my.php?image=itunesbug9st.jpg
If I then sync this entire library to my iPod, the track names have this same layout; Artist - Trackname.
Obviously I can't go through 5000 or so songs and play them all until they are displayed properly... is there anything else I can do?
Thanks!
Erik

I think I know the answers to your questions, but your use of DVD/CD (it's one or the other) and lack of precision of the issue isn't making this easy without turning this into a long post of every possible thing that could be happening.
Seeing Track#1, Track#2, etc. is typical when you import an audio format CD and do not have a feature activated that fetches track names from the Internet. Even if you do, if you save those files in WAV format they will not retain the names when backed up. Audio format CDs themselves do not contain track information.
AAC format files do retain track information (as internal tags), as do mp3 files. Again this is providing you saved the files when that information was present in the file. If that information is in the file then when you add the file to iTunes it should show up in iTunes even if the file name doesn't show it.
iTunes will not identify an audio file from just looking at it, not even if it is in an album. If you had stuck the CD into the computer and had the feature activated in iTunes, then it would compare the CD characteristics with a large database (Gracenote) and recover the track information for the CD itself, but not with a collection of mp3s or AACs. There are supposed to a few attempts to do this by third party utilities (none of which I can remember but a web search should reveal some) but not with overwhelming success.

Irritating UI "bugs" when renaming and deleting images

I have been using iPhoto for a couple of years now, and there are some minor glitches in the UI that simply frustrates the **** out of me in the new '08 version. Perhaps it's due to "wrong" usage, so please tell me if I can avoid them:
Firstly, I'm often viewing and comparing my images in fullscreen when cleaning up a large batch of vacation photos, but when I apple+backspc. to delete an image, it jumps to the start of the Event instead of showing me the image before/after the one I deleted - WHY!? This is only in fullscreen view - if I space-view it goes to the next picture as expected?
Secondly, there is apparently no shortcut for renaming an image, when viewing the thumbnails in an event or album. Numeric enter doesn't work (as ie. in iTunes), neither does (Windows) F2 or anything I could think of at least. Is there a shortcut that I just missed - please tell me!
This could seem rather minor, but my library counts 5800+ images, and I spend literally days in this program when I'm sorting new Events, so if these issues could be addressed either by an update or if I just need to know some little trick, I would be a much happier customer.
Thanks in advance.

Welcome to the Apple Discussions.
when I apple+backspc. to delete an image, it jumps to the start of the Event
Yes, that's a bug that's been reported before. Report it at http://www.apple.com/feedback/iphoto.html as the more reports the more likely it will come to the attention of the developers.
As far as renaming or titling in the thumbnail mode, you have to first click on the title so the title field is activated. Then you can enter any title you'd like.
You can also batch title files by using the Photos->Batch Change->Title menu option. This will rename them all the same or add a sequential number to the end of the title.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

When adding a tween, images become pixelated

I've used timline/animation in Photoshop for awhile, but just noticed, when I add tweens between two images, the original images become pixelated when I save as animated GIFs.
Test #1
Photoshop file with two layers -- each with a photograph
Timeline: frame 1 has image from layer 1 and frame 2 has image from layer 2
Choose Save For Web and the images look pretty goodI realize that GIFs are only 256 colors
Test #2
Create Photshop files as in Test #1
Add a tween with 1 frame
Choose Save For Web and the images look pretty good
Test #3
Create Photshop files as in Test #1
Add a tween with more than one frame
Choose Save For Web
The images are now pixelated
Trash...
All but one tween and an image is no longer pixelated, OR
All tweens and an image is no longer pixelated
In other words, Saving For Web is fine as long as I don't add any tweens. As soon as I do, the images become pixelated. Take out the tweens, the pixelation goes away. And, I have tried to make all kinds of adjustments to the GIFs.
Any help would be appreciated!
Thanks--Robert

HI Jeffrey:
I can surely post some photos (screen shots from the Save As Web interface) of what I'm talking about and share the PSD file as well.
• First image before Tween
If you carefully look at the light brown vertical paint just behind the girl's right shoulder -- no big pixelated dots. And the guy's sweatshirt looks fairly smooth in transitions from highlights to shadows.
• Second image after adding Tweens
You'll now notice all the extra dots -- especially in the vertical brown paint job and other parts of the wall and his shirts.
And it gets worse with other images/animations I've recently created.
One thing I didn't mention is that I noticed this a few months back. This morning, I realized that's when I got rid of my old trusty 21" CRT monitor and got an LCD flat panel. I hooked up my old CRT and the dots are gone! But that doesn't resolve the issue of why when you add tweens, does it pixelate.
Here's a link to the test.PSD file: https://dl.dropboxusercontent.com/u/109581077/test.psd
Any help would sure be appreciated! And if you need me to create a video of the steps I'm doing, I can do that to.
Thank you!
Robert

Yosemite Mail - Major bug when adding a Gmail account

On a Mac I open Mail for the first time.
It proposes me to add an email account.
I select Gmail and fill the three fields (Name, email, password).
When I click on Set Up, the second field (email) and the third field (password) are emptied and the cursor blinks in the second (email) field.
I repeat the steps and click on Set Up. Same problem.
This is a major bug. Impossible to add an email account in Mail.

This did not work for me. I am frustrated beyond belief right now. I did the 'other' route, added a Mail account.. put in my google apps for business email/app-specific password.. it said verifying.. everything was well & dandy. Yay its going to work!
And then it 'unchecks' mail after it sets itself up. It works, verifies, logs in, everything. It shows the password was used from the Google Security page.. at the exact time of setting it up..
And then it unchecks itself. I cannot 'check' mail on the account. It works for Contacts, Calendars, Messages.. but not Mail and Notes.
This is only on Yosemite. My other machine has Mavericks and it works as expected. Oy.

Adding vertical format images into Keynote

How do I bring vertical 35 mm slides from iPhoto into Keynote for a slide show, without cropping off the top and bottom of the image. What is the trick--or the ratio. I'm desperate

Export the intended photos, sizing them to the height of your presentation. Then import them to your presentation.

Lost + and - when adding custom book images

How do I go about getting the + and - signs that are the
default in the TOC to the left of the open and closed book images?
They were there with the default skin book images, though when I
changed to a custom open and closed book graphic (both same size as
the original), the + and - signs that are usually there
disappeared.

Hi ClubHans
You probably don't realize it, but you have answered your own
question!
The fact is, in a WebHelp system, the book and page icons are
simple images. Either the image contains the + or - symbol or it
doesn't. If you want the symbols, you will need to either edit your
existing images to include them, or substitute images that contain
the symbols as part of the image.
Cheers... Rick

(Bug?) Adding an excel chart into a sheet

Has anybody experienced the following problem?
I've built a chart in excel, and everything is ok, but when i try to put it into a sheet, something fails. There's no error reported, but the Location property of Chart class fails, and my chart appears as an independent sheet. This works fine under Visual Basic, so i thought it could be some problem with LabVIEW.
I'm using LV 5.0.1f1 and Excel 2000.
Thanks in advance

Well, I have a Labview 6i, but I don't know how put into charts in the same sheets?. Can you help me? I only put one chart in a new sheet. I send you my file, you can modified it to do that I want.
Attachments:
CreateChart_inSheet.vi ‏60 KB

Adding a 2D image into a 3D scene

hey guys probably a very fast simple question.
I would like to add a 2D image to my 3D scene, so is there an existing object ready for use, or do i have to create my own quadArray and apply texture with the image?
thanks

Combine all the PDFs into a single document. Use the place multipage PDF script to place all the pages of the PDF. Add the logo to the master page. Export a new PDF.
Or...create an InDesign book out of the INDD files. Add the logo to a master page, sync the master to the book and save.
Bob

Keep transitions intact when importing mult. iPhoto images into iMovie HD?

Is it possible to import a completed iPhoto album show with hundreds of images with random transitions between each into iMovie while still keeping the random transitions between the iPhoto images intact?
If not, is there a way to select random transitions between the still images in iMovie once they get there rather than select and create each and every one of the transitions myself?
Thanks!

Because iMovie and iPhoto serve different purposes, each has features not found in the other. There is no way in iMovie to automatically add random transitions to slideshows, for example, while iPhoto offers that feature. (In iMovie, the assumption is the user wants absolute control over such features, wants to control each frame of the slideshow.)
That doesn't prevent you from having your cake and eating it too, however. Remember, many of the iLife apps allow you move stuff around between them.
For example, you can create a slideshow containing random transitions in iPhoto, export it to a QuickTime movie, import that movie to iMovie, add titles and songs, add some video from a video camera, add a voiceover narration, add some Chapter Markers, add an iMovie theme to introduce each chapter, then send the iMovie project off to iDVD to burn a DVD that plays on a TV.
So, check out the File > Export command in iPhoto. Set the exported movie to 640x480. The command will export your iPhoto slideshow to an MPEG-4 type QuickTime movie. Create a new MPEG-4 type iMovie project and import that movie to it. (Use the disclosure arrow towards the bottom of the window where you name the new iMovie project to select the MPEG-4 project type.)
Karl

When importing an image into Flash, the filesize is reported incorrectly

I saved an image from Photoshop using "Save for Web" and managed to bring the filesize down to 56.5kb. When I import this image into Flash and click on the properties, the reported "Original" filesize is 1884.6kb which is a heck of a lot more. How can I import the image and retain the filesize without having to compress the image further causing a horrible quality image?

right click one of your bitmaps, click properties and tick "allow smoothing". retest.

Bug when adding a af:image into a ADS enabled table

Similar Messages

Maybe you are looking for