Bug when exporting large images

I found this bug in Flash 8, so I just downloaded CS5.5 trial and I see the same problem.
When I increase the image export resolution to get a larger image, at one point the lower section of the image became white (the image has the appropriate size but the content is not rendered in the lower section). As bigger is the image, larger is the white fraction. The amount of useful pixels always stay around 10 or 13 megapixels. Here some examples:
Original image was 3375x6710 pixels in the left one and 2625x5219 en the right one. Any idea to solve this?? Can anyone reproduce this problem?

That article is regarding the size of the bitmaps you can put INSIDE the project, and the issue I'm experiencing is regarding the size of the output when you use the "Export image" function.
Actually I got the same problem even if I delete all bitmaps from the stage and try to export only the vector features (lines, text, etc...).
I can't see clearly how the limit explained in that article could be related to a limit of exported images.
As example, the following image shows the same issue, but this time of a project with only vector data, no bitmaps at all, you can see how the rendering is truncated.

Similar Messages

  • How to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

    how to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

    Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version).  You get an image-format file _only_ when you export an Image.  You select the file name (usually a scheme) when you create an image-format file (that is, when you export).  Look under "Aperture→Presets→File Naming" for built-in Presets.  You can, of course, create your own or customize any provided.
    The Preset is applied to only the file newly created by your "export" command.  It is not applied to the Image in Aperture (unless you rename your Versions or your Masters).

  • When exporting an image: Image sizing, resize to fit auto changes measurements eg 22cm becomes 22,000cm. How do I fix this?

    When exporting an image in LR, any measurement entered into "Risize to fit...."automatically changes the measurement from 22cm to 22,000cm. for eg. or 33cm becomes 33,000cm.
    How do I fix this?

    Lr always uses three decimals for dimensions in the export dialog. So 22 cm is exactly the same as 22,000 cm.
    Maybe you're used to a dot as a decimal separator, and a comma as a thousand separator? If so, it probably looks like 22 thousand cm to you.
    Whether to use a dot or a comma for a decimal separator, is set in your computer's operating system.
    On windows, Control panel > Region and language.

  • Help needed exporting large image sizes

    Hi All,
    I'm a newbie so forgive my lack of understanding here when it comes to exporting to large file sizes. In short I'm trying to export some images for large format printing but am having trouble preparing the right size in LR4.
    Specifically I'm trying to produce w 30" x h 20" images. I understand that to do this I'll need a image that is 9000 x 6000 pixels set at 300 ppi. My problem is that when I export this, with the dimensions set to width and height in pixels and resize unchecked LR4 produces an image that is 9000 x 4887?
    Would appreciate any thoughts on what i'm doing wrong here? Is it simply that the aspect ratio of image is wrong to produce this size image? My concern is not producing an exact file size for printing.
    Thanks!
    Tom

    I've sorted the crop ration for a 3:2 image but resulting in a much smaller image.
    Could you give me the details? How much smaller? What size is it? What else did you change other than the aspect ratio?
    I then then tried a 16:9 ratio which is much better
    Details please? What is better? (And why try this if you need 3:2??)
    seem to have run into a similar prob in that calculations say for a 40 x 20 I'll need 6,000 x 12,000 but lr4 will only ouutput 6,000 by 10,667.
    You are repeating your initial mistake. Images cropped to 16:9 aspect ratio cannot export to a 3:2 aspect ratio. Only images cropped to a 3:2 aspect ratio will export to a 3:2 aspect ratio.

  • Premiere CC 2014 "Match Source" bug when exporting multiple clips

    Getting a strange bug when trying to batch export.
    The source clips are 4K MP4s. When exporting individually I use the Match Source button in the export dialogue and it correctly matches to the 4K frame size when sending to queue in Media Encoder.
    If I select multiple clips and batch export them, selecting "Match Source" they come out as NTSC DV 29fps 720 x 480. The only way to work around this is to manually enter the frame values in Media Encoder after queuing.
    Anyone come across this? Anyone at Adobe aware?
    System Specs:
    Mid 2010 Mac Pro 2 x 2.9GHz 6 Core Xeon
    32GB RAM
    nVidia GTX 680
    240GB SSD boot drive
    2TB internal cache drive
    Adobe Premiere 8.1.0 (81) Build
    OS 10.8.5

    Do you have a utility to check your computer temperatures?
    You MAY have a hardware problem, since video editing puts a LOT of stress on all components... below is not exactly the same, but worth reading
    BSOD shutdowns http://forums.adobe.com/thread/1427408?tstart=0
    http://blogs.adobe.com/kevinmonahan/2014/01/13/computer-shuts-down-with-premiere-pro-or-af ter-effects/

  • Photoshop CS5 crashing my Mac when resizing large images

    I don't have much to explain this further but Photoshop CS5 is crashing my Mac when I resize large images.  Small images are fine but large 300dpi images crashes it without warning.  Don't know what to do.  The only other similar thing is After Effects CS5 is crashing my Mac when I trim a clip.  It completely turns off my Mac when I trim a clip. 
    I have 8gigs of Ram and am running 27" iMac Core i5
    Any help would be much appreciated!
    Thanks,
    Hal

    Hi Wendy
    Thank you for your insights. We are having the same problems here.
    It's been a headache as we bought two 27" iMacs in March 2011; and we've had even BOTH iMacs exchanged.
    After exchanging, same thing happened. We then got all 16GB of RAM on each iMac replaced.
    But we noticed that the auto-shutdown problem happens with files on 300dpi. We are contemplating on changing them to 299dpi though haha!
    Unfortunately, here in Singapore, we don't have a physical Apple store. We only have Premium Resellers.
    And the other unfortunate thing is, when RAMs are upgraded these Premium Resellers sell 3rd party RAMs.
    I supposed we'll have to deal with this for now until we have enough funds to replace ALL 32 RAMs to original Apple RAMs (which will cost abt another USD1600!!) ..
    Hope this forum helps others as much as it finally helped me understand the issue we're having.

  • Labview crashes when creating large image files

    I have a problem with Labview 6.0.2( I've tested evaluation version 7.0 too).
    I'm constructing a very large image, for example: 4500x4500 pixels. Labview crashes when converting the pixture to a pixmap. The image is fully constructed on my screen (in a picture control), but when converting it to a pixmap (for saving the image in a known format (bmp, jpg, tiff)), Labview crashes.
    I did some testing and when the number of pixels exceeded the limit of 2^24(16777216), the file 'image.cpp' crashes on line 1570. The vi to convert it to a pixmap is: P'icture to pixmap.vi'
    Does someone know a workaround for this problem? Or is there a fix for it?
    Thank you!

    I've tested the 6i version of my VI in Labview 7.0 evalutation version. It raised an error but not the same error:
    d:\lvworm\src\lvsource\compatexport.cpp(37) : DAbort: Called a routine not in the compatibility LVRT table
    $Id: //labview/branches/Wormhole/dev/lvsource/compatexport.cpp#11 $
    0x004BD4CB - LabVIEW_Eval + 0
    0x0EB710D9 - lvs248 + 0
    0x094C87A0 - + 0
    So i replaced the picture VI's with the 7.0 evalutation version VI's, and it worked. It is now possible for me to construct very large image files!
    I see no attached VI to test. But i guess it is also solved in Labview 7.0
    I used this file to convert the picture to image data:
    C:\Program Files\National Instruments\LabVIEW 7.0 Evaluation\vi.lib
    \picture\pictutil.llb\Picture to Pixmap.vi
    And this file to convert image data to bmp:
    C:\Program Files\National Instruments\LabVIEW 7.0 Evaluation\vi.lib\picture\bmp.llb\Write BMP File.vi
    I guess i have to write a workaround for this problem:
    divide the picture in blocks of 4096 x 4096 and then merge the image data arrays of the bloks together.

  • Bug: Scrolling through large image in email

    It is not possible to scroll through a large image in an email. One can only either go excruiciatingly slowly, or the view just flies at full speed from one side of the image to the other, with no way to view parts of the image that are not on the edges.

    I preview throught XML publisher client on XP.
    version is;
    xmlp core 5.5.
    xdo xml parser 10.1.0.3.0
    wondering is there any newer version than this available to download?
    thanks for your kindly help

  • CS5: Bug when exporting directly from PPro with hardware MPE?

    For the record, I'm using:
    A GTX-480 (unsupported)
    The hardware MPE-enabling hack (unsupported)
    The latest version of the nVidia drivers (257.whatever)
    I discovered an issue, of sorts, when exporting directly from Premiere CS5, versus using the "Queue" option to send to AME. I was exporting from an NTSC DV Standard sequence to a 320x240 H.264, in which I had enable cropping and trimmed a bit off the sides and top and bottom of the source; the Output tab was summarily set to "Scale to Fit". With hardware MPE enabled in the Project Settings, the export would be the proper final dimensions (320x240), but any area that was cropped off was instead padded with black. The actual video content was then squeezed and malformed into the area not occupied by the black bars.
    I found that, if I disabled hardware MPE or sent the export through AME by use of the Queue button (instead of Export), then the export was performed properly--the video was cropped correctly and then the video stretched to the borders of the exported video, maintaining the desired aspect ratio.
    As I mentioned at the outset, I'm breaking a couple rules and perhaps tempting fate with others, but before I go about rolling back my drivers and the like, has anyone noticed a similar issue?
    ADDENDUM: By the way, the export doesn't need to come from a sequence. If I load up a source clip into the Source Monitor, and export from there using the process outlined above, I get the same issue. This would seem to indicate, to me, that this is due to some incompatibility with my card, its driver and hardware MPE...

    Did he demo renders or exports?
    About 11 minutes in, he [Dave] demos accelerated H.264 renders.
    Harm Millaard wrote:
    AFAIK MPE only works with renders, not with encoding.
    Well, he did both, actually--but the quote above is a typo on my part. I meant to say "exports" or "encodes." The last couple minutes of the aforementioned demo video are dedicated to exporting a sequence directly from Premiere, and having the benefit of hardware MPE. That's where I'm getting the issue I've outlined above; with hardware MPE enabled, and using the "Export" versus AME "Queue" button/function, I get the strange black outline. With software MPE or through AME, all is well.

  • Error when exporting large amount of data to Excel from Apex4

    Hi,
    I'm trying to export over 30,000 lines of data from a report in Apex 4 to an Excel spreadsheet, this is not using a csv file.
    It appears to be working and then I get 'No Response from Application Web Server'. The report works fine when exporting smaller amounts of data.
    We have just upgraded the application to Apex 4 from Apex 3, where it worked without any problem.
    Has anyone else had this problem? We were wondering if it was a parameter in Apex4 that needs to be set.
    We are using Application Express 4.1.1.00.23 on Oracle 11g.
    Any help would be appreciated.
    Thanks
    Sue

    Hi,
    >
    I'm trying to export over 30,000 lines of data from a report in Apex 4 to an Excel spreadsheet, this is not using a csv file.
    >
    How? Application Builder > Data Workshop? Apex Page Process? (Packaged) procedure?
    >
    It appears to be working and then I get 'No Response from Application Web Server'. The report works fine when exporting smaller amounts of data.
    We have just upgraded the application to Apex 4 from Apex 3, where it worked without any problem.
    >
    Have you changed your webserver in the process? Say moved from OHS to ApexListener?
    >
    Has anyone else had this problem? We were wondering if it was a parameter in Apex4 that needs to be set.
    We are using Application Express 4.1.1.00.23 on Oracle 11g.
    Any help would be appreciated.

  • BUG: Cannot amend a file name when exporting an image, without overtyping

    I've raised this on 4 bug reports now and had a live chat and been recommended to post this here.
    I've even gone to the trouble of screen capturing the bug as its hard to explain as the text explanation is confusing:
    When you select the file in the file view to get the name to appear in the file name input box, the name appears in the input box and  becomes highlighted.
    If you then click on the text to de-highlight it (as I want to amend it with a _v2 or _v3) as soon as you do ANY key press the whole text in the input box gets re-selected, meaning that any further key presses type over the file name.
    I then end up with a file name called "v2", as the underscore causes the selection and the V2 types over.....FRUSTRATING!
    This happens on all of our machines win7 and 8, but not in ANY of the other Adobe cloud programs. It seems like a simple FOCUS bug in the UI coding.
    Here's the video:
    Adobe Flash Issue - YouTube

    In Flash Pro CC 2014 on Win 7 Pro, yes it does the same thing. Any keyboard key I hit will work, but then the entire filename is selected. I'm so used to working with text from coding that I reflexively saw the selection and used an arrow key to deselect and move back to the spot I wanted to edit. It's definitely a hiccup and I would report it to the bug/wish form.
    Adobe - Feature Request/Bug Report Form

  • Warning: iOS 8 Resized My Images When Exporting Via Image Capture

    I have an iPad Air and I take lots of pictures. I installed iOS 8 last night. I don't like the lack of a Photo Stream and a Camera Roll, but I am willing to try new things, so I decided to clear out all the images from my iPad and start from scratch. Unfortunately, I've run into a pretty bad reproducible bug.
    First I copied all the Moments (i.e. Camera Roll) Photos on the iPad to my Mac using the Image Capture app. I've been doing this for years. Everything came out fine with those photos.
    I also had several iCloud shared albums so I decided to start over with them as well. Hmm, how to copy them over to my Mac? I tapped one picture and tapped "Share -> Save Image". OK that worked! So to save some time I tapped "Select" and then tapped all the pictures in the folder. Once again I tapped "Share -> Save 20 Images". Worked fine. Deleted the shared album. Did this with five other albums. Now everything is clean and I can start figuring out how this works from scratch.
    OR SO I THOUGHT. Once the pictures were on my Mac, I realized the pictures I exported one at a time were fine, but the ones I exported in groups came out at odd low resolutions - 257 x 342, 256 x 384, 268 x 332, instead of the full resolution of the original pictures.
    Luckily I had copies of all these pictures backed up, but this is not appropriate behavior. There was no warning that the pictures would be saved at a lower resolution. I'm not even sure the Photos app "meant" to do this. Why weren't the full sized images exported? Has anyone else had this experience? Could someone check and see if this is happening on their iPad?

    The photos in this thread are the same exported files that are in the slideshow. As you advance through the slideshow(try looking at the shadows to right of the subject and his sunglasses), you'll see a change in tone/saturation that, however subtle, is quite alarming for a consistent workflow.
    I always work with calibrated display profiles, and was told by Aperture Pro support to try the export with a standard, device independent profile to rule out a display profile related issue. I told them on the phone that while I'd try it, that would not be a viable solution long term for me, or any other professional, as different screens need to have independent, calibrated profiles for a consistent working environment.
    That said, regardless of the display profile(I tried multiple scenarios - including calibrated profiles), the exported file is always the same on the same machines - and as I said before, distinctly unique to each machine. The display profile should have nothing to do with it anyways, as that is simple a translation of the the 'static' data onto a specific screen. I'm not saying the screens look different to me, I'm saying that the exported files are different when viewed together on any one screen.
    These are all fresh installs of the same download; no settings in the software have been changed, except for what I've detailed above. The processing of the color/export should be the same from the same file in the same library with the same adjustments and the same software settings, but it's not.
    Can anyone try this same test in another environment? Or does anyone know how Aperture might leverage hardware perhaps in it's processing of color?
    -Ricky

  • Strange bug when exporting a spreadsheet to a pdf

    I am using Numbers 3.5 on a brand new Mac with Yosemite and I think that I have found a bug.  When I export a spreadsheet into either a pdf or excel file it works fine if I save it to my default location (Documents).  But if I change to a subfolder within Documents before I do the export I get an error message that says "The file name.pdf doesn't exist!"  (Where name is the filename that I have specified for the export.)  It's as if Numbers is trying to open an existing file instead of exporting to make a new one.  Any ideas on this?
    Thank you,
    Paul H.

    I will reply to my own question.  I spent some time with an Apple tech support person and at first I stumped him.  Eventually he got it to work and he thinks that the key was to get my computer to reindex my file structure.  He did that by creating another folder inside Downloads, exported to it OK, and then was able to export to my previously existing subfolders.  Thank you Apple!

  • Possible bug when opening NEF-images as Smart Objects in PS CS3?

    In architectural images I often apply lens corrections (Rotation, Distortion, vertical Transformation) to my RAW (NEF) images.
    When I open such an image in PS CS3 as a PSD all is fine, that means all the lens correction is applied.
    But when I open the same image in PS as a Smart Object the lens correction is not applied, i.e. PS shows the image with all LR-editing (such as color temperature, exposure, contrast, etc) except for the lens correction data.
    What is wrong here?
    I'm running LR 3.2 and PS CS3.
    Thank you for your input.
    ErnstK

    Thank you for your answers.
    It occurred to me - and Ian's post seems to confirm this - that PS CS3 is not fully compatible with LR3.2.
    When I chose <Edit in CS3> (to open the image as PSD) I get the message that my Camera Raw plug-in is 4.6 and it gives me the choice to <Open Anyway> or to <Render by LR>. I usually chose the latter and I assume that this is technically an Export.
    When I chose <Open as Smart Object> it just opens the image in CS3 without any dialog in between.
    I guess it's time to upgrade to CS5.
    Thank you all.
    ErnstK

  • Encore CS4 crashes when export to image bluray disc (using popup menu)

    Hi...
    When a export the bluray project to image bluray disc, its works fine.
    But, when i use popup menu, the exports crashs!!
    Please, help me.
    regards,
    Andre

    Jeff, thx for reply.
    Yes, i create the popup menu in PS using template popup HD as model.
    Import in encore project , link the buttons (buttons "red" not appear) and no errors.
    Export and ... bummm! crashes!
    I remove the popup menu and export normally.
    Any software adobe apps is open while i export.
    Andre

Maybe you are looking for