Bug with page templates

Hi
I mentioned this in another thread, which was about something completely different, so I thought I'd raise it separately so that it wasn't missed.
In page templates (not sute if this is introduced in 4 or not) but you cannot have the #TAB_CELL# substitution after #BOX_BODY# as it's not substituted. This can be easily reproduced by editing the page template to move the position of this substitution string.
Is this a known bug?
Sara

I'm beginning to doubt there is a point in templates when you have to guess what Oracle believe people will do 99% of the time.
That was two years ago, so hopefully someone will find Carl's notes soon... or see that really templates should allow developers the flexibility to decide how their application should look. :-) I'm sure this could be corrected to allow full flexibility especially when it's clearly a known issue.
Thanks for finding the post so quickly, I had searched the forums before posting.
Sara

Similar Messages

Bug with VI Template (.vit) behavior with express VI's in LV8.6.

Hello,
I have an application that was originally coded in LabVIEW 8.0, Windows XP. One part of the program utilizes a VI template (.vit) to open multiple instances of a subVI for the user. In versions prior to 8.6, when the VI was called via the VI server and then closed pragmatically, it did not spawn a "Save Changes..." dialog. Upon upgrading the application from LabVIEW 8.5 to 8.6.1 the "Save VI..." dialog shows up when the .vit subVI's are closed. After investigating the behavior, I have determined that inclusion of Express VI's (I haven't tested them all, but I've tested several) cause the "Save VI..." dialog to open when closing the .vit pragmatically. What's interesting is that it exhibits this aberrant behavior even if the express VI is in the disabled pane of the diagram disable function. (I thought that's supposed to remove the code from compilation completely?).
I've attached an example program that illustrates the behavior. Run "Call Template.vi". Select either the subVI with or without the express VI in the diagram disable function. Note that when closing the VI via the "stop" button with the express function the "Save Changes..." dialog opens and it does not with the express VI absent. I have only seen this behavior since upgrading to LabVIEW 8.6.1.
My only current workaround is to remove all express VI's from my application. Luckily this has been possible however I have had to use the "File Dialog" compatibility primitive (instead of the express VI file dialog) which claims not to be supported. It took a while to find that function: I had to find an old program and copy the vi.
Any other suggestions on fixing this issue?
Attachments:
VIT Bud lv8.6.zip ‏32 KB

F. Schube,
Excellent idea however there are a couple reasons this wouldn't work:
1) I want the user to be able to close a sub-window without having to terminate the entire Application Instance. There are other VI's running in the same instance that can't be closed. So I can't really use this event.
2) For strictly academic reasons, I coded it up to see if it would work. Even with Silent Shutdown wired as true, you still get the "Save Changes..." dialog when the event fires. (It turns out the best way to get the event to fire is killing LabVIEW with the task manager.) I've attached the modified example.
Attachments:
VIT Bug lv8.6.zip ‏39 KB

Problem with Pages Templates

My templates won't show images and the very small text is in purple. It is this way on all template examples. I've tried everything but can't figure out the problem. Help!

Upgrade Pages '08 to v3.03:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=6c6f3143427b 551ded24001de0cef3f5&mforum=iworktipsntrick
Peter

Interactive Reports - Problem (possible bug) with button template?

Hey all,
I possibly noticed a problem with the use of the button template of the search bar in an interactive report.
When I for example choose 'Button Alternative 1' as Button template and then save my report then it looks perfect.
When I now Export/import my application, I loose the button template of my interactive report, if I open the report attributes it isn't selected anymore.
Does anyone else have this problem?
Apex version: 3.1.2.00.02
Kind regards,
Oli

Oli,
Thanks for bringing this up. One of my beta testers just called to say that two of our IRs weren't showing the Cancel or Apply buttons at all. But the third IR worked fine. In my Alpha version, all three had Buttons as the selected style, so I'm a bit confused what went wrong.
But now I'm thinking if the fact that I had multiple themes defined in the application might have caused the confusion. I didn't deploy the themes from Alpha to Beta because they were all based on Theme 13, and I thought my extensions were included in the application export (which I didn't realize until recently). I'm guessing that if I drop the extraneous themes on Alpha and re-select the button theme, I should be okay when I deploy again?
I just dropped the extra themes in my Beta and the IRs button theme was undefined again, so I'm thinking they were pointing to the wrong "button" style. Hopefully cleaning up in alpha and changing these buttons will resolve this and I won't have deployment problems!
Wish me luck!
Stew

WS6U2: external inline assembler templates: optimising bug with %fsr

I have the following code in an external inline assembler template file:
! double fpop_eval_FADDd(const double*,const double*,unsigned long long*);
     .inline fpop_eval_FADDd,3
     ldx     [%o2], %fsr
     ldd     [%o0], %f0
     ldd     [%o1], %f2
     faddd     %f0, %f2, %f0
!     .volatile
     stx     %fsr, [%o2]
!     .nonvolatile
     .end
If I compile a C++ function that calls fpop_eval_FADDd() which is complicated enough (which I won't include here) with optimisation on (-xO1), then the "stx %fsr, [%o2]" gets optimised away (perhaps the code-generator doesn't realise that faddd has the side-effect of changing %fsr).
If I remove the comments (!) in front of the .volatile and .nonvolatile (or I compile without optimisation on) then it doesn't optimise it away (which is what I want). in fact it doesn't optimise the inline template and the calling function at all (which is not what I want)!
[btw. is there a bug report page for Forte C/C++? I've found one for Forte for Java, but I haven't found one for Forte C/C++]

I am getting this same issue. Did you ever find a fix for this?

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions. Complain to Apple, you may have better chance than me and they may finally listen to their users....

Need help with creating template. Changes are not going through to index.html page

Hi all,
I have an issue with my template that I am creating and also a question about creating template Regions (Repeating and Editable).
Somehow my changes to my index.dwt are not changing my index.html page.
Also my other question is: For my top navigation bar and left navigation bar links, do I need to select and define each individual button or link as Repeating/Editable Region? or can I just select the whole navigation bar (the one on the top) etc...
Below are my steps for creating my template...I am kinda fairly new to using DW and this is my first attempt to making a template following the DW tutorial CD that came with DW CS3.
I appreciate any help with this...regards, Dano
-Open my index.html file
-File/save as template
-Save
-update links - yes
-Select Repeating and Editable Regions (I selected the whole top navigation bar and selected Repeating Region and Editable Region, same with the left side navigation links)
-File close all
-Open the index.dwt
-Save as and selected the index.html and chose to overide it..
When I make changes to my index.dwt it is not changing the index.html
I feel that I am missing some important steps here.....
Website address
www.defenseproshop.com

Figured out

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here...

Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here... I have an iphone 4S and I did the last update. Now I am in trouble.
1. When I move the "sound on/off" button, I get it buzzing 10 times before the setting is changed and I can do anything else, just not reacting to the round button on screen touches.
2. Impossible to copy text from most websites into notes.
3. Impossible to delete an email account in settings.
4. Uses up the battery twice as fast as before. I have "update apps" setting turned off, just reading a couple of mails, making a couple of photos and open maps apps twice a day, and the battery is dead well before the evening.
5. Got extremely slow, and it was getting slower and slower with every system update.
I'm sure I forgot something... But well, that already a lot.

Well, actually number 3 in my list is not true any more, I just tried to delete my account 15 times, then I've written my post, then half an hour later my Settings finally updated my accounts list. Whohoo
I did not try restoring it yet, thank you for the link!

Page templates with predefined regions

Is it possible to create a page template with two predefined regions ? Much as createing a "page with components". This to be able to edit the regions after creating the page
perÃ¥ge

it sounds as if you'd want to create a page zero (:app_page_id = 0) in your app and throw your regions there...
user interface components that are to be common to multiple pages within an htmldb application should be placed on page zero. if you define your HTML and List regions there, they'll display on all the pages of your app. if you need them to not display on specific pages in your app, just set your region conditions accordingly.
hope this helps,
raj

I created a broacher with a template using pages but am unable to save it in JPEG. I tried saving as a pdf then using preview save as JPEG but it did not give that option??

I have created a boucher with PAGES using a template. How do I now get that teplate to JPEG?
I tried convertong it to a PDF then saving , but I never got an option to save as JPEG.
Appreciate any assistance.

What version of Pages?
Peter

I am working in pages with a template and want to keep the image but get rid of the black background?

I am working in pages with a template and want to keep the image but get rid of the black background?

Surprise surprise but we can't see what you are looking at and referring to.
What black background?
If it is black background in the actual photo:
Menu > Format > Instant Alpha > drag the cursor over the colored background you wish to remove
Peter

Template- container div background not expanding with page

Hello! Still fairly new to Dreamweaver. I'm building a website using a template I made. Theres one problem I can't figure out... I've created my "container" div and I'm using a style to add a background to this div. I have all my other divs inside the container. The problem I'm running into is that with pages of different lengths, the background doesn't expand to fill the rest of the page. As my content div (editable region) expands with more content, and my footer div moves down as it should, the background image just cuts off where it ended in the template. I created the background in photoshop, and I know for a fact that it's long enough to handle the lengthy pages. It's not a matter of the background image not being long enough, its just as the content div expands bigger than the template, it doesn't fill the entire container div.
So far my only solution is to make sure the template is tall enough to handle the longest page, and the shorter pages just have the added space below the content. I dont really want to do this, but I will if I have to. I hope I was clear enough, if you need screenshots or need to see the code I can post it. Thanks in advance for your help!
Justin

Unfortunately I dont have a server yet, I realize that would be easiest and I apologize.
I tried adding the repeat-y like you said, and it didn't make any difference. I also went into the style and chose repeat-y from the dropdown box and it added
background-repeat: repeat-y;
and that didnt work either. I may not have explained it well enough, in my template.dwt page the background works exactly as it should, it expands with the page. But after I created the new pages using this template, then expanded the content in the editable region, thats when the container background doesn't expand to fill the page. It's stuck at the point I saved it in the template. I dont want the entire background showing all the time, on the shorter pages I want it to only go to the bottom of the content. Does that make sense?
Thank you

Combine LR Pages with other templates, How?

Just bought LR pages from The Turning Gate. There is some info on their
website about combining LR pages with other templates. But I already
get stuck reading this information. Is there someone who would explain
this to me? I know a lot about photoshop, but this is something different.
Best regards, Marion

Hi Sean,
Thank you for the advice
best regards, Marion
Op 17 jun 2009, om 13:24 heeft Seán McCormack het volgende geschreven:
You really need to deal with Matthew on this Marion.
>
Here's the relevant support link:
>
http://www.lightroomforums.net/showthread.php?t=1527
>

Calling a taskflow with input parameters in a page template

Hi,
I have a taskFlow with an inputParameter, a page template with an attribute and a fragment using this template.
My fragment is passing #{bindings.MyColumn.inputValue} to the template attribute, where bindings.MyColumn is an attributeValues pointing to an iterator.
My template is calling the taskFlow and pass #{attrs.myColumn} to the input parameter. There is an outputText too, displaying #{attrs.myColumn}.
+fragment -- #{bindings.MyColumn.inputValue} --> template -- #{attrs.myColumn} --> taskFlow+
The problem is that #{attrs.myColumn} is resolved to null when is passed to the taskFlow inputParameter. But in the outputText value, #{attrs.myColumn} is resolved to the good value.
I don't understand what is happening.
If I pass #{data.fragmentPageDef.MyColumn.inputValue} directly from my template to the taskFlow input parameter it works, but no with #{attrs.myColumn}.
How can I do to pass a template attribute to a taskFlow inputParameter?

I think it is more something with ADF lifecycle.
Something like : #{attrs.myColumn} is resolved in a phase and the taskFlow in another. I don't know.
I am trying to understand what is done when. I think the answer is in "Prepare Model" and "Prepare Render" phases, but I am far to understand all this...
Any help is welcomed.

Bug with page templates

Similar Messages

Maybe you are looking for