Build executable error 200220 on Mac OS

I'm a beginner at labview and am hoping that someone with more experience would be able to spot this simple error I'm probably overlooking. I'm trying to build an executable application on labview 8.6 for mac OS. I created the project and created the application with my selected VI. Everything in the build process went smoothly however when I try to run the application I get the "200220" error stating my device identifier is invalid however I made sure of the device name on LSDAQ and the channel I'm sampling is correct. The other computer without labview that I am trying to run the application on does have the latest run time engine installed and the USB DAQ 6009 plugged in. Thanks

Hey Mark,
Yes both computers are identical macbook pros. The computer without the labview program installed I have installed DAQmxbase 3.2 . I don't believe I am referencing any tasks. Do you mind telling me under which tab of the application builder I can find the hardware settings function I haven't been able to find it. Thanks a lot for your reply
Hi Jerry,
What DAQ drivers are you using? DAQmx Base I assume. Is the developement computer Mac OS as well?
In
your program do you reference any tasks that you created on a different
computer? If so you will need to transfer those tasks or channels to
the new computer as well. There is an option within the applications
builder to include hardware setting that should include the DAQmx tasks.
Here is a similar forum. Let me know if any of this sounds similar or provide more information if you can.
Mark Sapp
National Instruments

Similar Messages

Unable To Build Executable: Error in finding run directory

Sun WorkShop C++ Compiler Version 5.0
Trying to compile, link and build executable.
Did I overlook something ?
# CC -o server server.c
Error in finding run directory. Using default /opt/SUNWspro/bin
Segmentation Fault - core dumped
#

<pre>
Hi EldridRensburg,
Following is an excerpt from one of the answer/solution
provided to similar reported problem. Please see if this
is the same case with you.
````````````````````````````````````````````````````
This problem occurs when the source code directory is NFS-mounted
but the permission of the mount point before mounting is not
consistent with the permissions of the remote file system.
e.g.,
# ls -ld /mnt
drwxrwxrw- 2 root sys 512 Dec 15 22:52 /mnt
# mount foo:/tmp /mnt
# ls -ld /mnt
drwxrwxrwx 7 root root 2037 Feb 18 16:35 /mnt
As a user:
% cd /mnt
% ls -ld /mnt
drwxrwxrwx 7 root 2037 Feb 18 16:41 /mnt/
% /opt/SUNWspro/bin/cc hello.c
Error in finding run directory. Using default /opt/SUNWspro/binSegmentation
Fault (core dumped)
% cd ..
..: Permission denied
Note that if the mount point /mnt does not have "x" permission for
others before the mount, the compiler will fail.
Make sure the permissions of the mount point is consistent
with the remote file system before mounting.
``````````````````````````````````````````````````
Thanks
Kalpesh
</pre>

Error 1003 when building executable

Hi, I'm using Labview 2010 on Windows 7 and I'm getting an error when I try to build an executable:
Error 1003 occurred at Open VI Reference in AB_Engine_EXE_Call_Write_Icons.vi->AB_EXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi->AB_UI_FRAMEWORK.vi->AB_Create_Build_Application.vi->EBUIP_Global_OnCommand.vi->EBUIP_Global_OnCommand.vi.ProxyCaller
Possible reason(s):
LabVIEW: The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located. Select File>>Open to open the VI and then verify that you are able to run it.
VI Path: C:\Program Files\National Instruments\LabVIEW 2010\vi.lib\Platform\icon.llb\Read Icons from ICO File.vi
This happens even when I try to build a simple vi, like a random number generator.

Same problem here. Error 1003 and error 8 I encoutered often.
For error 8 during build process, I needed to save the executable on a higher level in the file hierarchy.
For error 1003, I did not find a solution. Restarting LabView does not help. Sometimes (but not always) restarting the computer helps. Sometimes I need to reinstall the labview system.
More details: I have a first vi, starting the actual vi with a hidden front panel (second vi). This vi can also be started directly. Sometimes, the build process runs smoothly then when I include the second vi as main vi to start the program.
The program runs fine when the build process succeeds, and it runs fine in LabView.

Error 8 File permission error while building executable for a RT

I got error 8 File permission error while building executable for a RT. It happened always after build, I mean new startup.rtexe and startup.alias files have been created. At the build properties, it was set use default .alias file.
I had the executable built successfully at one time.
The detail message is:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Open/Create/Replace File in RTBEP_Generate_Deploy_Instructions.vi->RTBEP_Invoke_Build_Engine.vi->RTBUIP_Build_Invoke.vi->RTBUIP_Build_Rule_Editor.vi->RTBUIP_Open_Properties.vi->RTBUIP_Item_OnDoProperties.vi->RTBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
I checked relevant posts, couldn't find any clue.
Please give me some ideas.
Thanks.

Hi Ya-hoo,
Error building application in LabView 8.0 seems to describe a similar situation. The .alias file is important, as described in that discussion forum.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

Error building executable

Bonjour à tous,
Lorsque je terminais ma semaine hier, j'ai voulu réaliser un dernier test sur un Touch Panel, mais lorsque j'ai voulu construire l'executable sous Labview 2009, celui ci m'a affiché cette erreur :
Error building executable. Unable to create file
Quelqu'un saurait d'où vient cette erreur et comment la corriger? Elle est apparue comme ça sans réels changements du code, ce qui d'autant plus étrange!!
Merci pour vos réponses!

J'ai ce type d'erreur de temps en temps, pour moi dans 50% des cas, il suffit de quitter LabVIEW, de ré-ouvrir le projet, relancer le build et ça marche.
Sinon il faut que tu donnes plus de détails...
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Build payments error

I am trying to run a cheque payment batch but the Build payments request is erroring. I have run this successfully many times a month or so ago.
I have tried searching metalink, on OTN and googling the error but no luck.
Here is the log from the request:
Payments: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
IBYBUILD module: Build Payments
Current system time is 10-DEC-2012 17:36:39
**Starts**10-DEC-2012 17:36:40
**Ends**10-DEC-2012 17:36:43
BUILD PROGRAM ERROR - CANNOT COMPLETE CHECK NUMBERING
Start of log messages from FND_FILE
Enter Build :: Concurrent Request ID::4699011
|STEP 1: Insert Payment Service Request:: Timestamp:10-DEC-12 05.36.40.324885000 PM +11:00|
|STEP 2: Insert Documents :Timestamp:10-DEC-12 05.36.40.363742000 PM +11:00|
|STEP 3: Account/Profile Assignment :Timestamp:10-DEC-12 05.36.42.262375000 PM +11:00|
Request status after assignments: ASSIGNMENT_COMPLETE
|STEP 4: Document Validation :Timestamp:10-DEC-12 05.36.42.305476000 PM +11:00|
Request status after document validation: DOCUMENTS_VALIDATED
|STEP 5: Document Re-Validation: Timestamp:10-DEC-12 05.36.42.425959000 PM +11:00|
|STEP 6: Payment Creation :Timestamp:10-DEC-12 05.36.42.427070000 PM +11:00|
Request status after payment creation: PAYMENTS_CREATED
|STEP 7: Payment Re-Creation:Timestamp:10-DEC-12 05.36.42.942589000 PM +11:00|
Final status of payment request 683 (calling app pay req cd: tdl chq 10-dec-12 #6) before exiting build program is PAYMENTS_CREATED
|STEP 8: Check PICP Kickoff Flag: Timestamp:10-DEC-12 05.36.42.945151000 PM +11:00|
|STEP 9: Payment Instruction Creation :Timestamp:10-DEC-12 05.36.42.947062000 PM +11:00|
FV_FEDERAL_PAYMENT_FIELDS_PKG.GET_PAY_INSTR_SEQ_NUM: FV: Federal Enabled profile is not turned on
Return status of payment instruction creation: S
|STEP 10: Check Numbering : Timestamp:10-DEC-12 05.36.43.441961000 PM +11:00|
After numbering, return status: E, and return message:
Exception occured when numbering checks of payment instructions. Check numbering will be aborted ..
SQLCODE: -20001
SQLERRM: ORA-20001:
Build program error: Exception occured when attempting to provide printed document numbers (check numbers) for the payments of the provided payment service request.
End of log messages from FND_FILE
Executing request completion options...
Output file size:
439
Finished executing request completion options.
Concurrent request completed
Current system time is 10-DEC-2012 17:36:43
---------------------------------------------------------------------------

Hi,
Since you were able to run this successfully earlier, i would rule out the possibility of this being a BUG...
The second most likely cause is that, the payment document used by this payment process request is also being used in another payment process request which is in incomplete status....So, make sure there are no other payment process requests pending apart from this one ... either complete those or terminate those...
The Third cause is that, the payment document defined would have exhausted its sequence numbers, hence you should either increase the sequence or use a different payment document which has enough number of sequences available for generating checks...
By sequence i am referring to the number of check leafs...
If the above does not apply, then you would be better off logging a service request with oracle, as it could be something new which many are not aware of ...
Regards,
Ivruksha

BUILD PROGRAM ERROR - CANNOT CREATE PAYMENTS

Hi, I'm trying to run a payment batch using payments manager and encountered this error.
In my test data I used two suppliers that belongs to the same operating unit.
Payments: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
IBYBUILD module: Build Payments
Current system time is 09-NOV-2009 11:26:11
**Starts**09-NOV-2009 11:26:11
**Ends**09-NOV-2009 11:26:13
BUILD PROGRAM ERROR - CANNOT CREATE PAYMENTS
Start of log messages from FND_FILE
IBY_PAYGROUP_PUB.performPostHookProcess: Fatal error - Payment count mismatch after hook operation. # payments passed to hook: 1, # payments returning from hook: 2
IBY_PAYGROUP_PUB.performPostHookProcess: Aborting program ..
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
Exceptions posted by this request:
Concurrent Request for "Build Payments" has completed with error.
Concurrent request completed
Current system time is 09-NOV-2009 11:26:13
Please help
thanks,
Renz

Hi
Please review the below note from Metalink,
Bug No. 6771847
Filed 24-JAN-2008 Updated 13-MAR-2008
Product Oracle Payments Product Version 12.0.4
Platform Linux x86 Platform Version ENTERPRISE 4
Database Version 10.2.0.2 Affects Platforms Generic
Severity Severe Loss of Service Status Closed, Verified by Filer
Base Bug N/A Fixed in Product Version 12.0.4
Problem statement:
R12: AFTER APPLYING 12.0.4 BUILD PAYMENT PROGRAM ERRORS
please review the same if it resolvs your error.
Thanks
Manish Jain.

Build Program error

I am trying to make batch payment in Release 12 via a Payment Manager.
The invoice which are selected by the payment process request belong to 2 operating units. The problem comes with the build progam getting errored out.
The out file displays the following message:
"Build program error: Exception occured when attempting to create payments from the documents payable of the provided payment service request."
The log file is as follows:
Payments: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
IBYBUILD module: Build Payments
Current system time is 22-JUN-2009 15:08:50
**Starts**22-JUN-2009 15:08:50
**Ends**22-JUN-2009 15:09:08
BUILD PROGRAM ERROR - CANNOT CREATE PAYMENTS
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 22-JUN-2009 15:09:09
Could someone please provide a solution for this.
you may email me at [email protected]

so if i have 2 sites...say X and Y then I can pay invoices from these two sites using a single check.
say on X site i entered invoice 1 and 3
and on Y site i entered invoice 2 and 4
so can i pay all invoice 1 2 3 and 4 using batch payment..i know this is yes
but the question is can i pay using a single check???

Build installer error, help

Hi all,
There's a problem need your help.
I have a LV8.5 PDS. And I create a exe, when I want to create a installer, I cannot found any information is "additional installer". When I try to build it, error reports as below.
error information:
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_PreBuild.vi >> CDK_Validate_DistParts.vi >> CDK_DistParts_GetInstalledProducts.vi >> NI_MDF.lvlib:MDFProdInfoList_Open.vi
Before I reinstall my notebook, it worked.
Thanks ahead.

From the forum
The build specification for your installer may have been corrupted. Try the following to correct this:
Open up your project in the Project Explorer window and expand the Build Specifications tree.
Right-click all of the applications (executables) build specifications that are included in your installer and select Build to force each one to rebuild.
If all the executables build successfully, next right-click your installer's build specification and select Properties to change its configuration.
In the Category pane on the left, navigate to the Source Files category.
Find your executable (.exe) files on the right side and click it to select it. Press the Delete key or click the red X at the bottom of the window to remove the executable and its associated files from the build.
Re-add the executable and its files to the same folder by selecting the executable in the Project View pane and the proper folder in the Destination View pane (on Windows systems, this is typically ProgramFilesFolder\[your product name]), and clicking the blue arrow button in the middle of the window.
Repeat steps 5 and 6 for any other executables you have in your installer, as well as for any other files which show up in the ProgramFilesFolder path.
Your installer should now build successfully. If that does not work, try making a new installer build specification which has all of the same settings as the build specification which does not work. If the new installer builds properly, you can keep it and delete the old, corrupted specification.

"cannot execute" error

Hi -
I know that you can get a "cannot execute" error when trying to run a SPARC binary on an x86 system or vice versa.
However, we have a customer reporting this error when running our SPARC binary on his SPARC system. Both systems are running Solaris 10, but have different processors and different Update levels.
The binary is a 32-bit:
starlic-admin: ELF 32-bit MSB executable SPARC32PLUS Version 1, V8+ Required,
built on our system, which is a SunBlade 1500 (UltraSPARC) system running Solaris 10 Update 7, I believe:
uname -a
SunOS host 5.10 Generic_139555-08 sun4u sparc SUNW,Sun-Blade-1500
The customer is using a Fujitsu-Siemens SPARC system with Solaris 10 Update 3 (as near as I can tell):
SunOS host1 5.10 Generic_125100-10 sun4us sparc FJSV,GPUZC-M
Should the difference in processors make a difference? Or the difference in Update levels? Is there some different way I should be building our binaries so they will run on the end user's system?
I am puzzled by the error - the customer also has a Solaris x86 machine (where he initially tried installing our software) so there is a possibility that he accidentally went back to the original machine, but I think that unlikely.

Using an older version of our product (built on Solaris 8 with a pretty old version of the Sun C/C++ compiler (Sun Studio 8) worked. Luckily there have been no major changes in our product, so it's OK for this customer to run an older version, but I'm still trying to figure this out for future support.
The old binaries are built as ELF 32-bit MSB dynamic lib SPARC Version 1.
I built hello.c on our Solaris 10 update 7 system in a bunch of ways (e.g. with xarch=v7, etc), and tried building both with the old compiler from Sun Studio 8 (which we still have installed) and with Sun Studio 12u1:
/opt/SUNWspro/bin/cc hello.c -o oldv1
/opt/SUNWspro/bin/cc -xarch=v8plus hello.c -o oldv8plus
cc -xarch=v7 -o v7 hello.c
cc -xarch=v8 -o v8 hello.c
cc -xarch=generic -o generic hello.c
cc -xarch=sparc -o sparc hello.c
cc -xarch=v8plus -o v8plus hello.c
(oldv1: ELF 32-bit MSB executable SPARC Version 1)
( /usr/bin/cc -> /opt/sunstudio12.1/bin/cc)
and the customer gets the "can't execute" error for all of them - i.e. I can't figure out any way on our current system to build a binary that runs for this user.
So I'm thinking it's OS level rather than processor type. But I don't want to even suggest that the customer upgrade his OS unless I am 100% positive that it will resolve anything (and that it's the only solution).
Over in the HP-UX world, whenever there is an upgrade to a new version of the HP aCC compiler, there is a corresponding system patch for just the C and C++ runtimes - i.e. there is a single patch that you can specify in your end user system requirements. Perhaps there is something similar on Solaris? Guess it's time to dig deep into the documentation...

Language Problem when building executable

I'm having a weird issue when building executables. Labview seems to forget the english language. I have tried selecting English exclusively as the run time language but when i do that i get a "No supported languages installed!" error. Everthing works fine in the development environment. It only seems to apply to application menus and not custom user menus. Thanks for any insight.
Solved!
Go to Solution.
Attachments:
Language.png ‏3 KB

Hello Jed394,
I took a look into the issue, just to be sure the error thrown was “No support Language Installed,” correct? Check to see if the language of your operating system and the language LabVIEW is using is English. If these are both English, then it looks like this is an error due to installation issues in the run-time engine. Try to perform a repair by going through the install menu of LabVIEW. The following link will help you with the repair: http://digital.ni.com/public.nsf/allkb/FE6B641E86E55AF2862576DE00038001?OpenDocument
If you have any further issues, please let me know. Thanks!
Matt S.
Industrial Communications Product Support Engineer
National Instruments

SQL SP works, then throws 0x80040E14 after trying to build executable

I have test software in LabVIEW 2011 that logs results into our SQL Server database with a stored procedure. Once I got it working consistently, I checked it into our Visual Sorce Safe. It was working until I tried to build the software into an executable. Upon trying to log results in the executable, I received the following -2147217900 error when trying to execute the stored procedure (the ati_sp_InsertProcedureRun stored procedure) to create the procedure run in the database:
NI_Database_API.lvlib:Cmd Execute.vi->DBAccess.vi->AgilentQCTool.vi->ATIEOL.vi<ERR>ADO Error: 0x80040E14
Exception occured in Microsoft OLE DB Provider for SQL Server: Syntax error or access violation in NI_Database_API.lvlib:Rec Create - Command.vi->NI_Database_API.lvlib:Cmd Execute.vi->DBAccess.vi->AgilentQCTool.vi->ATIEOL.vi
What's really odd is that I began receiving this error in the development environment. On multiple computers. I have verified that the code is still the same as before; I pulled the VI from Source Safe, which predated the last time I successfully logged results.
I don't know if attempting to run as an executable was the precipitating event. Around the same time, I attempted to solve a problem where the test software kept referring to VIs from the 2010 Database Connectivity Toolkit by uninstalling the 2010 Database Connectivity Toolkit and letting LabVIEW update the called VIs to the 2011 versions and saving. I've also since tried repairing and then uninstalling and reinstalling the 2011 Database Connectivity Toolkit.
Attached is a standalone implementation of my database logging code, a little sanitized for proprietary information. Has anyone encountered similar mysterious errors when changing from 2010 to 2011 or when building executables? The code I'm using is the same, and IS assures me that there have been no changes to the database.
Thank you for any help or insight,
John
Solved!
Go to Solution.
Attachments:
DB_UT.vi ‏10 KB
DBAccessUnitTest.vi ‏83 KB
DBAccessUTGenericDialog.vi ‏21 KB

Hello,
So far I have been unable to see anything that gives me a lead as to what the problem could be. For this I am sorry.I think both of us will have one of those face palm moments.
I have a question and comment for you, does the Code still work on the original computer?
Second, I think it would help if you compiled a version of code with the ability to highlight execution. after being installed as an executable. Try running the executable (in highlight mode) on the other computers and see where it breaks.
Could you also send me a version of your code in Highlight execution mode?
As for me I downloaded your code and I was unable to get it to even run on my computer.
Dano
Highlight Execution debuggable executable.
http://ae.natinst.com/public.nsf/web/searchinternal/3087d91eeadbaf3d862571d1004af192?OpenDocument

Publish error - error determining the .Mac publish configuration values

I have been unable to publish a website refresh for the past 2 weeks (not since the first time I tried). When I attempt to publish, it hangs at the "preparing to publish" window and then gives the error message "There was an error determining the .Mac publish configuration values. Please try again in a few minutes." It does not then release this error window to close until it pops open another window telling me how many days I have left on my trial .mac account. It has the correct number of days so I assume that it is communicating with the .mac server at some level. My internet connection is via satellite. This is my only option as I am shipboard. Update: I was able to able to connect via cable recently and, much to my surprise (and frustration), everything posted fine. I have the most recent updates for all software including iWeb running on a MacBook 2GHz, 2GB ram and 28GB free harddisk(iWeb 1.1.2 and OS X 10.4.8 build 8L2127 ). My internet connectivity is fine for other applications and for other aspects of iWeb. The primary reason I purchased the MacBook was to use the iWeb and its publishing capability. I note from other threads that this is an established problem with iWeb and satellite internet connections. Has there been any reliable fix established for this problem? The last thread I could find was last summer (and nothing from Apple), seemingly enough time for Apple (or the creative members of AppleNation) to address it. Given the high cost and sporadic reliability of shipboard internet, I'm hoping to use .mac to host site because of the incremental update capability. If there hasn't been a reliable fix determined, can anyone recommend a hosting site/method that does work reliably with iWeb and a satellite internet connection. I'm completely in the dark how this would work. This is my first website experience.
Any and all help would be greatly appreciated. I already sent out the .mac website in my Christmas letter so I'm fairly commited (but could recover, if unworkable)
Thanks mucho!
MacBook 2GHz, 2GB Mac OS X (10.4.8) shipboard satellite internet connection

Now that would be cool...if we could figure out how to tell iWeb to be a little more patient with network latency! From all the reports here, it seems that if anything, iWeb has gotten more stringent in its network latency tolerance over the various little updates.
I personally use .Mac for my iWeb hosting right now... But you are right... if you could find some alternate place to host your iWeb pages, then you can use any FTP program to do the uploading.... and maybe be more successful from the shipboard internet access.
You might take a look at some of the free webhosts available... http://www.free-webhosts.com/ I have had pretty good experience with http://www.hostfreeweb.com/.

Report builder error after applying sql server 2008R2 SP3 when click on report builder gives error like 'Application validation did not succeed. Unable to continue.

Hi All,
I applied SQL server 2008 R2 SP3 recently but report builder doesn't work since then
When click on report builder gives error like 'Application validation did not succeed. Unable to continue.
and when I try to see details the error summary like following:
+File, Microsfot.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
this is urgent.
Please reply me asap.
thanks a lot in advance.
Regards,
Nik
Regards, Naman

Hi nikp11,
According to your description, you recently updated SQL Server 2008 R2 to SP3, Report Builder doesn’t work since then the error occurs: "Application validation did not succeed. Unable to continue".
This is an known issue in SSRS 2008 R2 SP3 that Microsoft has published an article addressing this issue. It is not planning to release a fix for this issue. But we could implement one of the following workarounds:
Install and run Report Builder 3.0 of SQL Server 2008 R2 RTM.
Install and run Report Builder of SQL Server 2014.
Uninstall Service Pack 3 then uninstall Service Pack 2 and then reinstall Service Pack 3.
Reference:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch
Thank you for your understanding.
Best Regards,
Wendy Fu

I get a Pre-execute error message when importing from Excel using the wizard.

Hello, I get the following pre execute error message(see below) when I try to import a table from Excel when using the wizard. I wrote my own code in the edit window. i noticed after writing it that the data types did not appear changed in the mappings window.
Can anyone explain what these errors mean and how they can be solved. Thank you.
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
Messages
* Warning 0x80049304: Data Flow Task 1: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator,
or on the system's console.
(SQL Server Import and Export Wizard)
- Prepare for Execute (Success)
- Pre-execute (Error)
Messages
* Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unspecified error".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The metadata could not be determined because every code path results in
an error; see previous errors for some of these.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid object name 'dbo.PriceTable$'.".
(SQL Server Import and Export Wizard)
* Error 0xc0202040: Data Flow Task 1: Failed to open a fastload rowset for "[dbo].[PriceTable$]". Check that the object exists in the database.
(SQL Server Import and Export Wizard)
* Error 0xc004701a: Data Flow Task 1: Destination - PriceTable$ failed the pre-execute phase and returned error code 0xC0202040.
(SQL Server Import and Export Wizard)
* Information 0x4004300b: Data Flow Task 1: "Destination - PriceTable$" wrote 0 rows.
(SQL Server Import and Export Wizard)
- Executing (Success)
- Copying to [dbo].[PriceTable$] (Stopped)
- Post-execute (Stopped)
frustrationmultiplied

Hello,
Are you willing to try other ways to do the same?
http://www.excel-sql-server.com/excel-import-to-sql-server-using-linked-servers.htm
http://support.microsoft.com/kb/321686 (Distributed queries)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Build executable error 200220 on Mac OS

Similar Messages

Maybe you are looking for