Build server for SOA Suite 10g

Hi,
I am trying to set up a build server for some projects in SOA Suite 10g. I need to create some ANT scripts for building, and get the code from SVN.
I've seen numerous examples of this for SOA Suite 11g and Hudson build server, but it doesn't seem to be as straightforward for 10g (with which I have little to no experience).
If anybody has done something similar, or has some tips, suggestions, links etc. to share with me, that would be much appreciated.
Thanks in advance.

Please refer -
http://www.oracle.com/technetwork/topics/soa/auto-deploy-098417.html
Regards,
Anuj

Similar Messages

Is SOA Essential training needed for SOA Suite 10g: Services Orchestration?

Is SOA Essential training needed for SOA Suite 10g: Services Orchestration? or Should I proceed with Services Orchestration?

No, essiantials is just a two day high level overview. The 5 day training is in-depth training on the SOA suite. I advice to do 5 day training.
Marc
http://orasoa.blogspot.com

Problems in starting Admin server for soa suite in windows 7 homebasic

Hi All,
I installed SOA Suite R1 in my laptop running windows 7 home basic version.
Its 64 bit OS but I installed the files in win32 folder as it didn't allow me to install the generic file and even win64 file.
installation was successful but after installation once I try to start the weblogic admin server using
startAdminServer.cmd through my command prompt. It is running for few seconds and command prompt is getting closed abruptly and nothing comes up.
It's very strange and I am not able to find out... Please help me.
Thanks In Advance.

Ideally you should be able to set up the 64-bit generic installer not sure of the reason...
Please use the correct version of 64 bit jdk and check the logs
You can check out the weblogic admin server logs
BEA_HOME\user_projects\domains\your_domain\servers\AdminServer\logs

Code for Lab execises in soa suite 10g

Can anyone please give me the link where I can get the labs code for soa suite 10g.like FarenheitTocelsius.ear and validate.wsdl
Any help is greatly appreciated.

Can anybody help me reg this.

Insatlling Oracle application server patchset 10.1.3.5.0 for Soa-bpel 10g

I have downloaded Oracle SOA Suite 10g (10.1.3.x) Disk1 and 10.1.3.5.0
Whenever Installing application server patchset 10.1.3.5.0 for soa-10g I am getting below error.
'There are no patches need to be applied for patchset application server patchset 10.1.3.5.0'.
Before installing application server patchset 10.1.3.5.0 any Prerequisites need to install .
Can you please help me above issue.
Thanks & Regards
jyo
Edited by: 878593 on Aug 11, 2011 4:51 AM

Below are the possibilities of this error:
1. Downloaded patch might be corrupted during transfer from one machine to another.
2. Any of the prerequisites could have failed
3. The right Oracle_home that needs to be patched is not selected.
Thanks,
Sharmela

Issue in starting soa suite 10g server in win 7

Hi All,
I recently upgraded my personal laptop to a new laptop with win 7 and hence trying to install all my oracle software from my old laptop to new one.
So far I have installed the following software - Oracle Developer Suite 10g, Oracle XE 11g, Oracle jDev Studio 11g ADF, Oracle Soa Suite 10g
All installation are working fine except the "Oracle Soa Suite 10g".
After installation, the server is starting fine and I am able to log into the Oracle Application Server 10g EM console.
But when I restart my system, I am not able to start the soa suite 10g.
If I run the "opmnctl start" from command line, a new command window is opening and closing immediately.
I am not able to find out the issue.
Can somebody please help me to identify the issue?
While installing the soa suite 10g, I had set the compatibility settings to "Win XP Service Pack 3", which was there in my old laptop.
Kindly help.
Thanks and Regards,
Janny

Hi All,
I recently upgraded my personal laptop to a new laptop with win 7 and hence trying to install all my oracle software from my old laptop to new one.
So far I have installed the following software - Oracle Developer Suite 10g, Oracle XE 11g, Oracle jDev Studio 11g ADF, Oracle Soa Suite 10g
All installation are working fine except the "Oracle Soa Suite 10g".
After installation, the server is starting fine and I am able to log into the Oracle Application Server 10g EM console.
But when I restart my system, I am not able to start the soa suite 10g.
If I run the "opmnctl start" from command line, a new command window is opening and closing immediately.
I am not able to find out the issue.
Can somebody please help me to identify the issue?
While installing the soa suite 10g, I had set the compatibility settings to "Win XP Service Pack 3", which was there in my old laptop.
Kindly help.
Thanks and Regards,
Janny

Oracle SOA Suite 10g; problem install

Good morning,
I try to install Oracle SOA Suite 10g, the install hangs at the last step in installing Oracle Web Services Manager by invoking the following message: Unable to locate a valid OC4J URI. Probably The Server is down.
When I execute opmnctl startall_ , it gives me errors and the installation gives the same error. ( Unable to locate a valid OC4J URI. Probably The Server is down)
Thank you for helping me.

Yes, I try to install on Vista.
This is the error exactly:_
BUILD FAILED
E:\product\10.1.3.1\OracleAS\owsm\scripts\install.xml:1996: The following error occurred while executing this line:
E:\product\10.1.3.1\OracleAS\owsm\scripts\deploy.xml:395: The following error occurred while executing this line:
E:\product\10.1.3.1\OracleAS\owsm\scrpc]
ts\oc4j.xml:24: Unable to locate a valid OC4J URI. The server is probably down.
Total time: 1 minute 24 seconds
Error 1
Echec de l'assistant de configuration "Assistant Configuration d'Oracle Web Services Manager "
Thank you for helping me
Edited by: 857737 on 10 mai 2011 04:28

Installation issue- Oracle SOA Suite 10g Release 3 (10.1.3.x)

Hi,
I am installating (basic installation) Oracle SOA Suite 10g Release 3 (10.1.3.x), I have Vista OS. Configuration assisstant ran successfully till (App server, ESB, BPEL prcoess manager) it reached to Web Services Manager. It threw up following error-
BUILD FAILED
C:\product\10.1.3.1\OracleAS_3\owsm\scripts\install.xml:1971: The following error occurred while executing this line:
C:\product\10.1.3.1\OracleAS_3\owsm\scripts\dataload.xml:199: java.sql.SQLException: Internal Error:Invalid Connect String
I have JDeveloper installed on my system. Let me know if you need the log file.
Any help is greatly appreciated.

Andre,
I am a newbee in this field and I could not understand your question. Can you please explain? I downloded Oracle JDeveloper to design BPEL processes and trying to install Oracle SOA suite for BPEL process manager, that is where I hit this road block.
Thanks

SOA Suite 10g and SOA Suite 11g? what are the major changes in these two?

Hi Experts,
I am keen in knowing about Soa Suite 11g. SOA Suite 10g and SOA Suite 11g, BPEL changes? what are the major changes in these two product/tool wise? Is now OSB is part of Soa Suite 11g? it would be helpful for us to know what are the major changes and updates or modifications came in 11g.
Please share this valuable information.
Is there still any version is in progress from Oracle, which is yet to be officially launched from oracle?

what are the major changes in these two product/tool wise? Few major changes to enlist are that SOA suite 10g was using Oracle Application Server (OC4J) however 11g is on Weblogic and 11g is based on SCA. B2B is now part of SOA suite itself and OSB can share a domain with SOA. You may refer below link to know few more -
http://blogs.oracle.com/soabpm/2010/03/11gr1_patchset_2_111130_soa_fe.html
Is now OSB is part of Soa Suite 11g? OSB has a separate installer but can share a domain with SOA and SOA-direct binding is also supported now. Refer below link to know more about new features in OSB 11g -
http://download.oracle.com/docs/cd/E14571_01/relnotes.1111/e10132/osb.htm#CJACHEHJ
Is there still any version is in progress from Oracle, which is yet to be officially launched from oracle?No major release is planned. Patches for 11g R1 may come.
Regards,
Anuj

Using Microsoft Exchange Server in SOA Suite

Hi Gurus,
I want to use Microsoft Exchange Server for sending email notifications in SOA Suite.
I tried connecting to my company( Exchange Server) SMTP name and port no but its failing with all options ( SSL, TSL , NONE).I even tested with OSB, adding SMTP server and sending mail using Business Service but it's failing
I have tested with Apache James and Gmail as email server and it works fine,but problem comes when in want to configure it with company Exchange Server
Did any one have configured/tried connecting to Microsoft Exchange Server using SOA Suite. Please provide your inputs.
Socket Excpetion while sending emails in 11g
says Oracle UMS does not works with Microsoft Exchange Server and we need to replace some jars.
Please suggest !!
Regards,
Abhinav Gupta

Hi Neeraj,
for OutgoingMailServerSecurity : TLS
*******error*****
******** in Email Driver Logs *********
javax.mail.MessagingException: Can't send command to SMTP host;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.mail.smtp.SMTPTransport.sendCommand(SMTPTransport.java:1564)
at com.sun.mail.smtp.SMTPTransport.sendCommand(SMTPTransport.java:1551)
at com.sun.mail.smtp.SMTPTransport.ehlo(SMTPTransport.java:935)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:426)
at javax.mail.Service.connect(Service.java:310)
at javax.mail.Service.connect(Service.java:169)
at javax.mail.Service.connect(Service.java:118)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:780)
at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
*****IN console Logs *******
Jun 25, 2012 3:45:36 PM IST> <Error> <oracle.soa.services.notification> <BEA-00
0000> <<.> Error status received from UMS.
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : javax.mail.MessagingException: Can't send command to S
MTP host;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorExc
eption: PKIX path building failed: sun.security.provider.certpath.SunCertPathBui
lderException: unable to find valid certification path to requested target,
Addressed to : EMAIL:abhinav.gupta@*********.com,
UMS Driver : Farm_base_domain/base_domain/AdminServer/usermessagingdriv
er-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : 23239c4f0ac0064b017335c74f86a8e9,
Gateway message Id : ****.outlook.com:[email protected]@*******.com,
Status Received at : Mon Jun 25 15:45:34 IST 2012.
Check status details and fix the underlying reason, which caused error.
>
********error *******
for OutgoingMailServerSecurity : NONE
*******error*****
******** in Email Driver Logs *********
javax.mail.MessagingException: [EOF]
at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:1481)
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1512)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:1054)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:634)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:781)
at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
*****IN console Logs *******
<Jun 25, 2012 3:57:10 PM IST> <Error> <oracle.soa.services.notification> <BEA-00
0000> <<.> Error status received from UMS.
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : javax.mail.MessagingException: [EOF],
Addressed to : EMAIL:abhinav.gupta@*****.com,
UMS Driver : Farm_base_domain/base_domain/AdminServer/usermessagingdriv
er-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : 232e2ab70ac0064b01cd6ee979e494ed,
Gateway message Id : ****.outlook.com:[email protected].******.com,
Status Received at : Mon Jun 25 15:57:04 IST 2012.
Check status details and fix the underlying reason, which caused error.
*******error*****
Please suggest me what to do !! I am stuck with it for last two days !!

SOA Suite 10g on JBoss

We tried a pilot at (Oracle client) and ran into numerous challenges (i.e. SOA server going down by itself, nothing in the log files, etc).
Is SOA Suite now certified on JBoss. Is this a stable combination ?
If anyone else used this configuration for a medium size organization how stable was the SOA Suite on JBoss solution - i.e.on a 1-10 scale 10meaning perfectly stable.
Also, uninstalling submodules of SOA suite is not a straight forward process, rather challenging wehen using JBoss vs oc4j
(i.e. tried to uninstall BPEL and keep ESB only, but things got ‘broken’ for other components that proved to be in fact dependencies, after that attempt to scale down the install).
Obviously for the future we recommend switching to version 11 with Weblogic, however we want to use the work/effort invested in this pilot project by a middleware team.
Many thanks for related feedback!
CLC

Is SOA Suite now certified on JBoss.Oracle SOA Suite 10g is certified on JBoss(Version 4.0.5 + jbossws-1.2.1) since SOA Suite patchset 10.1.3.3
Installation doc is here -
http://download.oracle.com/docs/cd/E10291_01/doc.1013/e12536/jboss.htm
In section "1.2 System and Database Requirements" you may see the versions of softwares certified for this combo.
All Oracle SOA certification info is available here -
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
Regards,
Anuj

Does Windows 2003 supports to install SOA suite 10g

Dear all,
Does windows 2003 server machine supports to install Oracle SOA Suite 10g. Or, will it loses any features.
Where can I find system minimum requirements (for windows) to install Oracle SOA Server suite 10g.
Thanks,
Rajesh A

Hi Rajesh,
Yes, Windows 2003 server supports all features of Oracle SOA Suite.
See to that you have atleast 2GB of RAM.
Thanks,
RV

Oracle Oracle SOA Suite 10g (10.1.3.1.0) with Oracle Forms

I need run an Oracle Forms 6i application on then web, after migration process that convert modules to Oracle Forms 10g modules, can i run my application on the Oracle Application Server latest version (Oracle Oracle SOA Suite 10g (10.1.3.1.0))?

Forms and reports is not included in the 10.1.3 release - so you need to deploy Forms and reports on 10.1.2 and 10.1.3 on a different installation home. Next release of Forms will be 11
Regards
Grant

How to send multiple docs in soa suite 10g ?

Hi All ,
I am using Soa Suite 10g (10.1.1.3).
I had a requirement to send multiple docs for single id. say for example, i have table emp and document and for single empid field i have multiple documents. i need to transform in such a way that details from emp along with multiple documents for the corresponding empid
in emp table i have : empname , empid, dept, place
in document table i have : empid1 document1,document2 , empid1 document3,document4
means for the same emp id , i have two documents rows.
I dont want send emp details multiple times, but for the single emp details i need to send multiple docs.
say empid1,empname,dept,place and document1,document2,document3,document4
i use transformation, multiple docs are not transforming, second details overiding my fitrst transformation.
plese help me , how can i send multiple docs to another service
Thanks in advance

Hi,
I must say that your explanation of your problem is a little fuzzy. But as far as I understand it, you would need an xsd of your external service with a list of documents per employee.
The more or less simplest/straightforward way to do it is using a loop in BPEL. Then within an assign in the loop you could do:
<copy>
<from variable="inputVariable"
query="/ns1:a/ns1:b/ns1:c"
part="payload"/>
<to variable="ServiceDocumentProperty"
query="/ns22:Property/ns22:value"/>
</copy>
<bpelx:append>
<bpelx:from variable="ServiceDocumentProperty"/>
<bpelx:to variable="lServiceDocumentPropertyList"
query="/ns22:PropertyList"/>
</bpelx:append>
I think you could do it as well in a transform, but then you should create a (set of) custom templates that traverses the source list of documents in a recursive way. For some examples you could read this article: http://blog.darwin-it.nl/2013/02/sending-and-saving-emails-in-soasuite.html. Because the difficulty in your case is (as I understand correctly) you have a detail table with 2 documents per row. What would be more logical and simpeler is if you would had 1 document per child-row.
If you could redesign your source-model into a single document per row, then in the xslt-transform you could do just the for-each construct.
Regards,
Martien

How to run SSO registration tool in Oracle SOA Suite 10g

Hi,
I want to enable SSO for applications running in SOA Suite.
All the documentation discuss about enabling OSSO in Oracle Infrastructure or Oracle Identity Server but not for SOA Suite.
The biggest issue is SOA Suite doesnot has ORASSO application in it, so please guide me how to implement O-SSO in SOA Suite.

When you refer to the SOA suite, are you talking about the HTTP Server and OC4J or the BPEL products?
For HTTP server and OC4J, implementation is done like that of a AS10g middle tier. You need to run the SSO registration tool and configure the containers to use SSO. To do this you need to have a IDM 10.1.4 installed somewhere else.
Regards,
Luis

Build server for SOA Suite 10g

Similar Messages

Maybe you are looking for