Building installer requires CD named by project

Hi,
I'm trying to build an installer which contains some additional packages, like DAQmx, NI-CAN. It runs on my mashine but as I moved the project to another PC and tried to build it, it keeps asking me a disk which is in the name of the Installer.
I have all the "developer suite" disks but don't (and won't) have this disk.
How can I ignore this dialog and use the "developer suite" disk instead?

Hi, 
thanks for your reply! I paste 2 pictures here to show how terrible is the error:
Error 1: As you see, the buld rejected my CD. All the CDs I've tried returns the same error.
Error 2: Then I used my Installer which is built on my laptop as reference. It turns out to be another error saids the version is not the right one.
I will also provide you some infomation why I have make it so complicated:
I've installed the LV2010 on my mashine and took the source code from 8.6 for updating. Naturally the code was converted to  2010 (sp1) format. I made an exe on my laptop and runs without problems on the mashines with developer suite. But on a PC with LV-Runtime and all the "plug-ins" (NI-CAN, DAQmx) windows always shows an error at start-up and promt to close the program. However, the program runs successfully on the mashine, if I ignore the close program dialog.
I suspect that, the SP1 makes the error without the run-time. So I tried to make an EXE on the desktop. 
On the desktop has the LV2010 (without sp1) developer suite. It builds the exe, which works perfectly on every PC (on which the run-time, NICAN and DAQmx are installed). But when I tried to build an installer, it fails and shows the error you've seen above...
It is posible to install the SP1 on the desktop but I don't want to take the risk right now! 

Similar Messages

  • Building installer requires CD read

    Why is it when I build an installer it prompts me to load the distribution and driver CDs? Shouldn't all this be available on my hard drive already? See attached screenshot.
    Attachments:
    INSTALLER.JPG ‏75 KB

    How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
    http://digital.ni.com/public.nsf/allkb/5C55288F366FC5CA862570F500680F7C

  • Project Build Installer Properties Slow to load, (Maximum vi size)

    I have a LabVIEW Project with 450Mbytes of source code, and drivers.  The Project was originality in LabVIEW 2009.  I upgraded to LabVIEW 2011. 
    Now the Project Build > Installer Properties Menu is about 10x slower than was in LV 2009.
    I've done a mass compile, resolved all error messages in the Project, yet 2011 is still 10x slower than 2009.
    The 2011 Project will build an functional exe, and a functional installer given enough time (like 15 minutes).  During that time the computer is locked up, no other applications are functional.
    The Computer is XP, dual Core, 2.5GHz, 4Gbytes Ram, 4Gbyte Page File.
    The NI Support Desk is saying (quote)   >>>>   seem that the requirements for LabVIEW 2011 are different than the requirements for LabVIEW 2009    <<<<<
    Suggestions ???

    Does the procedure take 30 minutes or 15 minutes (first post)? Also, what is it about the installer build spec that requires further modification after you modify your exe build spec? If the exe is included in the installer, the installer build will automatically re-preview the included exe to get an updated list of files to include next time the installer is built. So unless you need to modify something about the installer spec and not the included source files, no edits would normally be required after changing your exe (or other included source files).
    Keep in mind, the previewing of the exe will take about as long as it takes to build the exe -- it's computing a list of the files that would be built without actually creating the files. A data point of interest is how much longer it takes your exe to build, comparing 2009 to 2011. Does your exe take 10 times longer to build in 2011? Longer exe build times mean longer preview operations in Installer Builder.
    Another thing to check is which distributions you're including on the Additional Installers page. Are more distributions being included in the 2011 build? Did the distributions change significantly in size since 2009?

  • Study business process requirements in sd implementation project?

    how to study business process requirements in sd implementation project?

    Hi chandu,
    I will suggest you first go through the document given below
    SAP Implementation is the whole of processes that defines a complete method to implement SAP software in an organization. The SAP implementation method described in this entry is a generic method and not a specific implementation method as such. It is based on best practices and case studies from various literature sources and presents a collection of processes and products that make up a complete implementation method to allow any organization to plan and execute the implementation of SAP (ERP) software.
    Concept Definition
    CHANGE MANAGEMENT ***Activities involved in (1) defining and installing new values, attitudes, norms, and behaviors within an organization that support new ways of doing work and overcome resistance to change; (2) building consensus among customers and stakeholders on specific changes designed to better meet their needs; and (3) planning, testing, and implementing all aspects of the transition from one organizational structure or business process to another. (www.gao.gov)
    CHANGE MANAGEMENT DOCUMENTATION All documentation that is required and being delivered whilst performing change management, e.g. the functional test cases and all the other documents a new end-user of SAP requires and the various tools and approaches used to manage change by the TSO. (Anderson, 2003)
    COST OF OWNERSHIP ANALYSIS Determination of where and when the costs are inquired within the context of the SAP solution stack and ongoing operations. The analysis addresses all internal and external costs, both one-time as well as recurring (Anderson, 2003)
    CUTOVER The process of transitioning from one system to a new one (Anderson, 2003)
    CUTOVER PLAN All documentation related to planning, preparing and executing cutover, describing how to lock down the system from a technical change management perspective, preparing the TSO for its new role and rolling out the SAP graphical user interface to all future end users. (Anderson, 2003)
    DATA CENTER A data center is a facility used for housing a large amount of electronic equipment, typically computers and communications equipment. (www.wikipedia.org)
    DATA CENTER REQUIREMENT A requirement for the SAP data center, i.e. a physical requirement like power requirements, a rack requirement, a network infrastructure requirement or a requirement to the network server. (Anderson, 2003)
    DISASTER RECOVERY (DR) REQUIREMENT Requirement that focuses on downtime that lasts many hours to days or even weeks (Anderson, 2003)
    FUNCTIONAL TEST CASE A set of conditions or variables under which a tester will determine if a certain business process works (www.wikipedia.org)
    HIGH AVAILABILITY (HA) REQUIREMENT Requirements that describes the amount of time that the system needs to be available to satisfy the needs of the users. (Anderson, 2003)
    INSTALLATION DOCUMENTATION All documentation related to the installation of an end-to-end SAP solution (Anderson, 2003)
    OPERATIONS MANUAL The collection of current state system documentation, day-to-day and other regularly scheduled operations tasks, various installation and operations checklists and how-to process documents. (Anderson, 2003)
    SAP SAP AG is the name of the biggest European software company. The head office is in Walldorf, Germany. SAP was founded in 1972 as Systemanalyse und Programmentwicklung ("Systems Analysis and Product") by five former IBM employees in Mannheim, Germany. (www.wikipedia.org)
    SAP IMPLEMENTATION PROJECT PLAN A comprehensive project plan that contains all products that are delivered whilst performing an SAP implementation project (Anderson, 2003)
    SOLUTION STACK Set of software subsystems or components needed to deliver a fully functional solution, e.g. a product or service. (www.wikipedia.org)
    SOLUTION STACK PARTNERS LIST A list of all vendors that deliver the products that make up the SAP solution stack (Anderson, 2003)
    SOLUTION VISION A vision of the future-state of the SAP solution (Anderson, 2003)
    STRESS TEST PLAN A test plan that is focused at determining the stability of a given system or entity. It involves testing beyond normal operational capacity, often to a breaking point, in order to observe the results. (www.wikipedia.org)
    TEST PLAN A detail of how the test will proceed, who will do the testing, what will be tested, in how much time the test will take place, and to what quality level the test will be performed. (IEEE 829)
    TRAINING The acquisition of knowledge, skills, and attitudes as a result of the teaching of vocational or practical skills and knowledge that relates to specific useful skills (www.wikipedia.org)
    TRAINING PLAN Consisting of training units, a training plan is the result of hierarchical decompositions of a training goal, tailored according to the learning preferences and prior knowledge of the trainee. A plan is the means by which the trainee satisfies the goal. (www.ece.eps.hw.ac.uk/)
    TSO Technical Support Organization. The people that are committed to implementation and management of SAP. (Anderson, 2003)
    TSO CHART A chart that depicts the structure of the TSO. (Anderson, 2003)
    Activity Sub-Activity Description
    Project preparation Craft solution vision Refine and communicate a SOLUTION VISION of the future-state of the SAP solution, to sketch a design that meets both business and financial requirements. The focus should be on the companyu2019s core business and how the SAP solution will better enable that core business to be successful.
    Design and initially staff the SAP TSO Design and staff the key positions of the SAP Technical Support Organization (TSO), the organization that is charged with addressing, designing, implementing and supporting the SAP solution.
    Sizing and blueprinting Perform cost of ownership analysis Perform a COST OF OWNERSHIP ANALYSIS to determine how to get the best business solution for the least money i.e. to determine where and when the costs are incurred within the context of the SAP solution stack.
    Identify high availability and disaster recovery requirements Determine all HIGH AVAILABILITY and DISASTER RECOVERY REQUIREMENTS, to plan what to do with later downtime of the SAP system
    Engage SAP solution stack vendors Select the best SAP hardware and software technology partners for all layers and components of the SAP SOLUTION STACK, based on a side-by-side sizing comparison
    Staff TSO Staff the bulk of the TSO, i.e. fill the positions that directly support the near-term objectives of the implementation, which are to develop and begin installation/implementation of the SAP data center.
    Execute training Train the various members of the SAP TSO, like data center specialists, high availability specialist and network specialists and train the end-users to give all the required SAP knowledge and skills
    Setup SAP DATA CENTER Build a new SAP DATA CENTER facility or transform the current data center into a foundation capable of supporting the SAP SOLUTION STACK
    Perform installations Install the (My)SAP components and technological foundations like a web application server or enterprise portal.
    Round out support for SAP Identify and staff the remaining TSO roles, e.g. roles that relate to help desk work and other such support providing work.
    SAP functional development Address Change Management Develop a planned approach to the changes in the organization. The objective is to maximize the collective efforts of all people involved in the change and minimize the risk of failure of implementing the changes related to the SAP implementation.
    Address SAP systems and operations management Create a foundation for the SAP systems management and SAP computer operations, by creating a SAP OPERATIONS MANUAL and by evaluating SAP management applications.
    Perform functional, integration and regression tests Test the SAP business processes, by executing functional tests to ensure that business processes work, integration tests to ensure that the organizationu2019s business processes work together with other business processes and regression tests to prove that a specific set of data and processes yield consistent and repeatable results.
    Final Preparation Perform systems and stress tests Plan, script, execute and monitor SAP STRESS TESTS, to see if the expectations of the end users, defined in service level agreements, will be met.
    Prepare for cutover Plan, prepare and execute the CUTOVER, by creating a CUTOVER PLAN that describes all cutover tasks that have to be performed before the actual go-live
    Go Live Turn on the SAP system for the end-users
    Hope this will help.
    Reward Point if helpful.
    Thanks,
    Raja

  • Bug in the flex builder installer

    I found a bug in the Flex builder installer, while someone
    tried to install Flex on top of our EasyEclipse eclipse distro.
    I am making a post here since I could not find a way to
    report a bug anywhere on the Adobe web site :-\
    So the bug is that the installer is looking for an eclipse
    installation that is packaged exactly like the Eclipse platform,
    but also specifically checks for the presence of features named
    org.eclipse.rcp and org.eclipse.platform.
    Yet the flex features themselves do not care about other
    features only about the platform plugins to be present, as it
    shoudl be.
    It is considered a bad practice by the Eclipse platform team
    to have a dependecy on features, and it is recommended to use
    instead plugin depdencies.
    See
    http://wiki.eclipse.org/index.php/Version_Numbering#Versioning_features
    As a result, Flex cannot be installed anywhere but on a vanilla
    Eclipse.
    EasyEclipse does not ship the base features of the Eclipse
    platform, yet all the Flex plugins dependencies are statisfied.
    See our forum for more details:
    http://sourceforge.net/forum/message.php?msg_id=3982548

    Getting back to the original message in this thread, I want
    to post an update about what I learned on digging deeper. The Flex
    Builder 2.0.1 Plug-in version does not require a vanilla eclipse to
    install into, but it does impose some minimal constraints. Before
    release, we installed FB 2.0.1 Plug-in successfully with several
    customized Eclipse configurations, including RSA7 and BEA, each of
    which uses a different folder configuration for its product
    extension point.
    I took a close look at the dependency list for our FB 2.0.1
    features, and these have been plugin-based dependencies all along,
    not feature dependencies. I understand why it might appear as if
    they're feature-based though, because our installer requires that
    the feature named org.eclipse.platform be present.
    We have the installer look for that feature, because that's
    the way Eclipse's update manager reports what's already installed
    and available. Eclipse's commandline API for updates only provides
    Feature info, not Plugin info:
    http://help.eclipse.org/help32/index.jsp?topic=/org.eclipse.platform.doc.isv/reference/mis c/update_standalone.html
    The FB Plug-in installer checks for the existence of
    org.eclipse.platform so that we have some assurance that the
    version of eclipse proposed is at least version 3.1.2 or higher. In
    our next release, we'll explore alternate way of gleaning this same
    information, with the intention of allowing plug-in installs into
    products such as EasyEclipse that don't include any Eclipse
    features in their products.
    C. Agruss
    quote:
    Originally posted by:
    pombreda
    I found a bug in the Flex builder installer, while someone
    tried to install Flex on top of our EasyEclipse eclipse distro.
    I am making a post here since I could not find a way to
    report a bug anywhere on the Adobe web site :-\
    So the bug is that the installer is looking for an eclipse
    installation that is packaged exactly like the Eclipse platform,
    but also specifically checks for the presence of features named
    org.eclipse.rcp and org.eclipse.platform.
    Yet the flex features themselves do not care about other
    features only about the platform plugins to be present, as it
    shoudl be.
    It is considered a bad practice by the Eclipse platform team
    to have a dependecy on features, and it is recommended to use
    instead plugin depdencies.
    See
    http://wiki.eclipse.org/index.php/Version_Numbering#Versioning_features
    As a result, Flex cannot be installed anywhere but on a vanilla
    Eclipse.
    EasyEclipse does not ship the base features of the Eclipse
    platform, yet all the Flex plugins dependencies are statisfied.
    See our forum for more details:
    http://sourceforge.net/forum/message.php?msg_id=3982548

  • Problem of build installer

    Hi!
    I have got LabVIEW 10 and I need create build installer. But I don't build installer and have error 12 occured at CDK_CreateNewWizard_Invoke.vi.ProxyCaller.....
    Thank! 
    Attachments:
    ошибка.jpg ‏88 KB

    Error code 12 might be something that needs to be looked at.
    But hey have you tried THIS.
    Let me know the progress.
    =========================================
    Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
    Mangesh D.
    CLAD | Project Engineer
    ==
    VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....

  • I can not create an Installer, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...

    I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
    Solved!
    Go to Solution.

     Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
     Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
     You can find more details about this issue in this KB:
    KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
    And for keeping a copy here is more info:
     How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
    Best Regards
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • Project deleted in iPhoto 11 ver. 9.1.1 After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i

    Project deleted in iPhoto 11 ver. 9.1.1
    After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i didn't read, dummy) by pressing the delete button. The whole project was gone, the undo menu was grayed out and there was nothing in the iPhoto trash about my Book.
    Surly I can find this if I knew the path to find the project in a library on a back column I have of my hard drive.. Could anyone help me?

    Sorry I'm having a hard time getting this.
    If I go to my hard drive BIGMAC>Library>Application Support>iPhoto>the only thing in this folder is Themes.
    However, when I "Get Info" it's 580MB for 24,421 items. iPhoto says I have 35,977 photos. I would think the database would be into the GB for this many photos.
    If I go to BIGMAC>system>Library>I find nothing about iPhoto
    Is the iPhoto file in the Application Support the one I need to replace with my backup?
    Thanks so much for your help.
    Jack

  • Default Target Main Build does not exist in this project

    I am learning ant with eclipse and wanted to use ant build.xml to compile and run my class. I was getting the following error when i just tried to use ant.
    Default Target Main Build does not exist in this project
    package src;
    public class Ch05_02 {
        public static void main(String[] args) {
            System.out.println("This code was built using Ant.");
    <?xml version="1.0" encoding = "UTF-8"?>
    <project name="Ch05_02" default="Main Build" basedir=".">
    </project>Ref: http://www.javabeginner.com/Ch05_02.zip
    Edited by: hemanthjava on Oct 28, 2007 5:43 AM

    You gave a default target in the build.xml, and then didn't define the target.
    This is an Ant question. You're better off asking Ant questions on an Ant forum.

  • Where does flex builder keep refererences to the flex projects?

    Where does flex builder keep refererences to the flex projects?
    I'm getting an error like this on FB3 startup:
    The folder PR System Intranet does not exist in the workspace so the reference must be somewhere else.
    thanks
    !SESSION 2009-11-02 09:47:52.203 -----------------------------------------------
    eclipse.buildId=unknown
    java.version=1.5.0_11
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_GB
    Command-line arguments:  -os win32 -ws win32 -arch x86
    !ENTRY org.eclipse.core.resources 2 10035 2009-11-02 09:47:53.610
    !MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
    !ENTRY org.eclipse.core.resources 4 567 2009-11-02 09:47:53.829
    !MESSAGE Workspace restored, but some problems occurred.
    !SUBENTRY 1 org.eclipse.core.resources 4 567 2009-11-02 09:47:53.829
    !MESSAGE Could not read metadata for 'PR System Intranet'.
    !STACK 1
    org.eclipse.core.internal.resources.ResourceException: The project description file (.project) for 'PR System Intranet' is missing. This file contains important information about the project. The project will not function properly until this file is restored.
    at org.eclipse.core.internal.localstore.FileSystemResourceManager.read(FileSystemResourceMan ager.java:663)
    at org.eclipse.core.internal.resources.SaveManager.restoreMetaInfo(SaveManager.java:792)
    at org.eclipse.core.internal.resources.SaveManager.restoreMetaInfo(SaveManager.java:772)
    at org.eclipse.core.internal.resources.SaveManager.restore(SaveManager.java:663)
    at org.eclipse.core.internal.resources.SaveManager.startup(SaveManager.java:1319)
    at org.eclipse.core.internal.resources.Workspace.startup(Workspace.java:1949)
    at org.eclipse.core.internal.resources.Workspace.open(Workspace.java:1713)
    at org.eclipse.core.resources.ResourcesPlugin.start(ResourcesPlugin.java:363)
    at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:9 99)
    at java.security.AccessController.doPrivileged(Native Method)
    at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextIm pl.java:993)
    at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:9 74)
    at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:346)
    at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:260)
    at org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:400)
    at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:111)
    at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :417)
    at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:189)
    at org.eclipse.osgi.framework.internal.core.BundleLoader.findLocalClass(BundleLoader.java:34 0)
    at org.eclipse.osgi.framework.internal.core.SingleSourcePackage.loadClass(SingleSourcePackag e.java:37)
    at org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java :405)
    at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
    at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
    at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:83)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    at com.adobe.flexbuilder.standalone.FlexBuilderApplication.start(FlexBuilderApplication.java :111)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:106)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:76)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
    at org.eclipse.equinox.launcher.Main.main(Main.java:1148)
    !SUBENTRY 2 org.eclipse.core.resources 4 567 2009-11-02 09:47:53.829
    !MESSAGE The project description file (.project) for 'PR System Intranet' is missing. This file contains important information about the project. The project will not function properly until this file is restored.
    !ENTRY org.eclipse.osgi 4 0 2009-11-02 09:47:53.860
    !MESSAGE An error occurred while automatically activating bundle org.eclipse.core.resources (161).
    !STACK 0

    Thanks but that file contains things like
    <?xml version="1.0" encoding="UTF-8"?>
    <actionScriptProperties mainApplicationPath="main.mxml" version="3">
    <compiler additionalCompilerArguments="-services &quot;X:\Coldfusion9\wwwroot\WEB-INF\flex\services-config.xml&quot; -locale en_US" copyDependentFiles="true" enableModuleDebug="true" flexSDK="Flex 3.2" generateAccessible="true" htmlExpressInstall="true" htmlGenerate="false" htmlHistoryManagement="true" htmlPlayerVersion="9.0.28" htmlPlayerVersionCheck="true" outputFolderPath="Staff_Ratings-debug" sourceFolderPath="src" strict="true" useApolloConfig="false" verifyDigests="true" warn="true">
    <compilerSourcePath>
    <compilerSourcePathEntry kind="1" linkType="1" path="H:/flash"/>
    </compilerSourcePath>
    <libraryPath defaultLinkType="1">
    <libraryPathEntry kind="4" path=""/>
    </libraryPath>
    <sourceAttachmentPath/>
    </compiler>
    <applications>
    <application path="main.mxml"/>
    </applications>
    <modules/>
    <buildCSSFiles/>
    </actionScriptProperties>
    I don't see how FB3 knows about the
    Pr System Intranet
    project that seems to be the cause of the errors.

  • Geting error when build installer

    I'm getting Error 33 and dotnet x86 ni language pack error and build stops
    how can I solve this issue?
    Building executable is fine, but the problem occurs during building installer.
    Please advice
    regards
    Pierre Tannoury
    Pevatech International S.A.R.L

    thanks for helping,
    i still receive another messages but the dotnet error message is gone
    please see below the building status and what's errors remaining
    CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
    Loading product deployment information
    Loading product deployment information
    Adding files to installer
    Done adding files
    Preparing to build deployment
    Copying products from distributions
    Building deployment
    Copying setup files
    Setting merged database information
    Setting product information
    Setting developer part information
    Starting final build
    Validating...
    Copying files...
    Updating files...
    *** Error: Fatal runtime error. (Error code -10)
    *** Error Details:
    Access violation! Structured exception code 3221225477
    *** End Error Report
    *** Error: An internal tool or library returned an error. (Error code -21)
    Error Messages
    *** Error Details:
    Error in MDF API function: _MDFBuildDist_Build
    Error List
    .\InputParser.cpp(819): IInstallerError 108
    Problem with updating Part DataSocket64.msi.
    *** End Error Report
    Done building deployment

  • [svn:osmf:] 14412: Added the Syndication. swc to the command line build config file for the AkamaiPluginSample project .

    Revision: 14412
    Revision: 14412
    Author:   [email protected]
    Date:     2010-02-24 17:48:22 -0800 (Wed, 24 Feb 2010)
    Log Message:
    Added the Syndication.swc to the command line build config file for the AkamaiPluginSample project.
    Modified Paths:
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml

    I think it is not supported through ant script and you may have to contact Oracle Support. Please go through below thread (hisaak's reply) -
    Re: Export OSB configuration jar file using Ant
    Regards,
    Anuj

  • Collect business process requirements in sd implementation project?

    how to collect business process requirements in sd implementation project?

    how to collect business process requirements in sd implementation project?

  • APEX 4.0.1 installation requirements

    Hi guys,
    the installation requirements document states that a minimum release of 10.2.0.3 is required. What does that mean exactly with regard to the compatibility parameter?
    When I run this script:
    PROMPT ***
    PROMPT *** Minimum Oracle Version for APEX:
    PROMPT ***   APEX 1.x-3.2: >= 9.2.0.3 and Oracle XE
    PROMPT ***   APEX 4.x: >= 10.2.0.3 and Oracle XE
    PROMPT ***
    DECLARE
       l_version         VARCHAR2 (100);
       l_compatibility   VARCHAR2 (100);
    BEGIN
       DBMS_UTILITY.db_version (VERSION            => l_version,
                                COMPATIBILITY      => l_compatibility
       DBMS_OUTPUT.put_line (   'Version: '
                             || l_version
                             || '  Compatibility: '
                             || l_compatibility
    END;
    PROMPT ***
    PROMPT *** v$version
    PROMPT ***
    column banner format A100;
    SELECT banner
      FROM v$version;I get the following result:
    *** Minimum Oracle Version for APEX:
    ***   APEX 1.x-3.2: >= 9.2.0.3 and Oracle XE
    ***   APEX 4.x: >= 10.2.0.3 and Oracle XE
    Version: 10.2.0.4.0  Compatibility: 10.2.0.1.0
    PL/SQL-Prozedur erfolgreich abgeschlossen.
    *** v$version
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    CORE     10.2.0.4.0     Production
    TNS for Solaris: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - ProductionDo I fulfill the requirements or not ?
    Cheers,
    Dietmar.

    Hi Dietmar,
    Yes - you fulfill the requirements. In a true 10.2.0.1 DB environment (not XE), you would not even be able to install APEX 4.0.1.
    The primary requirement for database version 10.2.0.3 is the change made to SYS.DBMS_SYS_SQL.PARSE, where the ability to observe database roles was added. I highly doubt this feature would be disabled by setting compatible to 10.2.0.1.
    Joel

  • USB/Serial Drivers and App Builder Installer Questions...are drivers included in the Installer with the LV runtime engine?

    Hello all,
    I'm wondering if someone can help me out with how drivers and all are treated with applications distributed with App Builder, used to create a stand alone, full install of app and labview engine with Installer.
    What has happened  is, my application was created using the NI branded USB to RS232...and USB to RS485, and they work great.
    On the application when running..you fire it up, it finds the USB to serial device, and I have a dropdown that finds the available COM ports to use (along with setting parity, etc).
    I've installed on different computers (without previous labview installs) with the installer. They all worked.
    The customer has received the installer....and despite us telling them to use the NI branded USB/Serial interfaces..they are trying to work with a different USB/serial cable.
    They say the COM ports aren't even showing up when they run the installed application.
    So, I'm not sure where to start. Is this a driver issue?  Does the App Builder Installer...install the drivers for the interfaces I was using with it? Is there a way for the person to find and install a driver on their own...or would I have to somehow find out a driver for what they use....then, basically redo the App Builder Installer build...to include that driver with the executable I send back out?
    I guess I basically need a better understanding of how drivers for external access/communications are handled when you use App Builder to create a stand alone application complete with the labview runtime engine...and nothing else.
    Thank you in advance,
    cayenne

    The main thing is that LV uses VISA to talk to serial port whether native on the machine or from USB dongles that you plug into the computer. It sounds to me like their dongles aren't working.
    Can the customer see the ports in the Windows Device Manager? Can they access them through something like hyperterminal? How does your program find the USB/Serial devices?
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Maybe you are looking for

  • Edit Color Sync for Exports for Web Sites

    Hi, Perhaps this has been covered, but I've not found the thread. Most of the export color sync questions seem to revolve around printing or displaying on one's own monitor. Neither is an issue for me. However, I note that my RAW images exported from

  • TRYING TO BURN CDS AND COPY THEM

     WANT TO KNOW HOW CAN U COPY CDS AND BURN DVD ON MY LAPTOP. EVEN CALLED IN AND THEY TELL ME I HAVE TO PAY FOR THERE HELP CAN SOME ONE HELP ME PLEASE CAUSE THEY WEBSITE DON'T EVEN HELP ME THAT JUST S SHAME PLEASE HELP ME

  • HT203477 My clips don't appear. They appear as blue boxes. Any ideas how to fix this?

    My clips don't appear. They appear as blue boxes. I have to click through them to reveal them each time I need to do an edit... which slows up the process on a big edit right now. Any ideas how to fix this? With thanks, Steve

  • Does photo not integrate with photoshop?

    I've been using Macs and iPhoto since the start. I typically do edits in Photoshop, eschewing the simplistic edit tools aimed at consumers by using photoshop. Now with this "upgrade" it will not let me pick a preferred graphics editing software. In o

  • Copying a module pool program

    Hi, I am trying to copy a module pool program. I've followed the below steps. Go to SE80. Give the module pool program name. Click on COPY Give the target program name. Select all the check boxes even the INCLUDEs check box Click on COPY Give the inc