Building theme SWF with recent nightly

I'm trying to upgrade from the Flex 4 Beta 2 SDK to nightly build 12891, and am having an issue with our dynamically-loaded theme SWF:
When the theme SWF is built via ant, running mxmlc on the CSS file, at theme-loading time our app tries to download the framework RSLs again (i.e., they were already downloaded when the app initially loaded). It also attempts to load a locale (which was also already loaded).
When the theme SWF is built via Flash Builder (by selecting the 'Compile CSS to SWF' option on the CSS file, and using the same nightly SDK), it does not attempt to load the framework RSLs or a locale.
This behavior differs from what we see when using the Beta 2 SDK; in that case, I never noticed the RSLs being requested when the theme was loaded.
Also, the theme SWF that is created with ant is smaller (50-some kb) than the one created by Flash Builder (80-some kb), when using nightly 12891.
When using the Beta 2 SDK, the theme SWF created with ant was larger than the one created by Flash Builder, using the same compiler options.
This implies that Flash Builder is providing some different options to mxmlc than our ant target is, but it's a mystery to me what those are. It seems that the default behavior of mxmlc has changed between the two SDKs.
Our ant call to mxmlc is quite simple: we provide the CSS file as the source, add an assets directory to the source path, and set our main application SWC as an external library (so skin files can resolve their host components).
I tried adding the framework SWCs as external libraries, but that didn't change the behavior.
What options should I be providing to replicate Flash Builder's compile command?
Cheers,
Aron

Nothing jumps out at me from the generated config.xml; perhaps it'll be more meaningful to you:
http://pastebin.com/m40f8aa8e
This is from the top-level project that also contains the CSS file being compiled into a SWF. (Our main code base is in another, library project.)
Bug or not, am I correct in thinking that Flash Builder is just invoking mxmlc to compile the CSS file? I.e., there is some set of options that I can provide to mxmlc to achieve the same (working) result?
Cheers,
Aron

Similar Messages

  • I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices

    I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices,

    Hi jhyiesla,
    Im not sure wether I got you right or not. But my advice/s would be as follows:
    These steps help you get rid of old apps you downloaded years ago and you do not use anymore.(Also frees space on your mac after emptying the trash)
    1) go to iTunes and delete all applications in it. Make sure to move them to trash! Do not empty your trash yet. Its your backup if step 3 doesnt appear.
    2) connect both your devices(one after each other) and make a backup. !!!Dont press the Sync button, press the Back Up Now Button
    3) Then it asks you if you want to backup applications as well. Confirm. (This is how apps get transferred manually)
    4) Then Sync your devices... The first time it might be, that there are some additional apps loaded to your devices you dont want to.. delete them on your Device (not iTunes) and after that you should be good every time you sync again.
    5) now you can empty your trash on your mac.
    Further,
    - You should regularly connect your devices with iTunes to make sure they are backed up. (Even if you have activated iCloud backup, the iTunes backup is more proper i.e.. Apps)
    - If you hate scrolling through a list of apps in iTunes, you can re/install apps directly on iOS not via iTunes. I absolutely never go to the "Applications" section in iTunes. I install and delete apps directly on iOS.
    jl

  • I have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

    i have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??

    Your redemption code was used to acquire an activation code.  The activation code is what you need to use when you want to reinstall/enable the software again.  Check your Adobe account online to see if the number(s) can be found there.

  • Capturing a dynamic swf with url parameters?

    Hi,
    I'm wondering if it's possible for users to capture an swf
    with URL variables?
    for example ->
    www.somesite.com/foo.swf?param1="value"&param2=value"
    normal swf rippers will catch only the base "naked" swf, but
    is there a way to fully capture the whole flash object after it has
    rendered the parameters?
    (for example, if it's an ad, the full ad with all the
    elements will be captured)
    this can help me to quickly generate demo stand-alone
    instances for some apps i'm building, instead of compiling them
    separately

    oops...sorry for double posting..

  • Build a form with xml

    I recently was "volunteered" to build a new website for a local non-profit organization. I am fairly descent at building static sites(but brand new to dynamic), and I have run into an issue with a form area on the site. They have 3 training signup pages that are quite lengthy, and need updated regularly. The folks there are not exactly computer-savy so I am worried about them going into Dreamweaver and messing stuff up. I am trying to find a way to give them an easy way to update the form as necessary and save them the expense of hiring someone to update the list as needed. I have been doing some research on xml and spry to see if this would apply to forms. Can xml populate a form, with all needed checkboxes, and other info needed? The current site is build in html, with php form-to-mail attributes.
    Ideally I would want the form to auto-delete training dates that have already passed, add an easy admin function to add new content via xml, and retain the form to mail function. Here is the address of the page as it is right now: http://www.clickhappytesting.com/wcrTraining.html . Currently there are only like 20 or so items on the form, but there are usually like 100 per form.
    I am using DWcs4 so any help, or direction to where I could find help, or even an extension that would work would be GREATLY appreciated.
    Thank You,
    Shawn Lloyd

    Originally posted by: mirdous.seznam.cz
    Hi
    I do have same problem with EMF form based editor and source page. My
    Form page is working from EMF w/o problems but I do not know how to put
    xml editor to create source page to be in sync w/ model.
    Can you guys help me w/ this. Do you have any code anywhere or doc to
    follow so I'm able to get into it. Tnx
    Miro
    > Daniel Rohe wrote:
    > I'm currently experimenting with the EMF integration of the WST
    > (org.eclipse.wst.common.emf). So far I've got managed to load a self-defined
    > model through an implementation of the TranslatorResource and
    > TranslatorResourceFactory, these classes are also used by the JST components
    > in the plugin org.eclipse.jst.core. After finishing the model I want to do
    > the same step and create an editor with some form based pages and a single
    > source page. So I'm also interested in hearing something about synchronizing
    > EMF models and SSE editor.
    >
    > Regards
    > Daniel
    >
    > "Yang Liu" <[email protected]> schrieb im Newsbeitrag
    > news:65b2a87819b4d1f5b2d0ba8349e996db$[email protected]..
    >
    >>A question on EMF and SSE.
    >>
    >>I am trying to build a multipage web.xml editor. With both customized
    >>editor page (form based) and a source code page.
    >>
    >>For the source code page, I want to use the SSE xml editor. For the
    >>customized editor page, I want to use the EMF model for web.xml (there
    >>seemed to have all the EMF model artifacts there already in jst).
    >>
    >>The question I have is how to combine them together? Is there any existing
    >>implementation for this kind of usage or is there any plan? How to make
    >>the pages (and views) synchronized?
    >>
    >>Thanks and regards,
    >>yang
    >>
    >
    >
    >

  • Load SWF file in main SWF with parameters

    Hello everybody,
    I recently got a new flash Application which is a Photo Gallery.
    This App is made of multiple folders (source files), a FLA file, a SWF with its javascript SWFObject and an Html page which instantiate this App with some parameters (size, config file path, ...).
    It needs an XML file to find all the Photos it displays, to do it I need to configure my application in the HTML Page and give it the "xml_path" :
    var so = new SWFObject("index.swf", "gallery", "249", "249", "10", "#111111");
    so.addVariable("xml_path","load/config.xml"); // this line is adding the path to the xml file make sure that it's name is xml_path
    so.addParam("allowfullscreen","true"); 
    so.write("flashcontent");
    By the way, I have a second application, the WebSite, which have to display the Gallery SWF in its "Gallery" page.
    Here is how I do it at the moment (in ActionScript3) :
    var swfRequest:URLRequest = new URLRequest("C:/......../Galerie/index.swf");
    var swfLoader:Loader = new Loader();
    //Charge le SWF Galerie dans le SWF Site
    swfLoader.load(swfRequest, context);
    container1.addChild(swfLoader);
    //Positionne le SWF
    swfLoader.x=10;
    swfLoader.y=120;
    It successfully loads the Gallery application but It shows an error telling me it doesn't find the XML configuration file... In the HTML file I simply had to write the "so.addVariable("xml_path","load/config.xml");" to tell where the XML file is...
    So, my question is : How can I integrate my SWF application giving it some parameters like above, in Action Script 3?
    Thank you ,
    Patrick

    No, nothing with HTML.
    I have 2 SWF applications. One is the Gallery, and the second is my Main Page.
    My Main Page must integrate the Gallery module in one of its page.
    The problem is when I try to integrate it, I think I must give de future loaded SWF some parameters like this :
    (My Main SWF loading in HTML)
    var so = new SWFObject("WebSite.swf", "flashcontent", "520", "700", "10", "#111111");
    so.addParam("allowfullscreen","true");
    so.addParam("allowScriptAccess","always");
    so.addParam("menu","false");
    so.addParam("wmode","opaque");
    so.addParam("bgcolor","#000000");
    so.setAttribute("id","flash");
    so.write("flashcontent");
    It was for the Main App. For my Gallery SWF I had to load it like this (in HTML) :
    var so = new SWFObject("Gallerie.swf", "gallery", "249", "249", "10", "#111111");
    so.addVariable("xml_path","Galerie/config.xml"); // this line is adding the path to the xml file make sure that it's name is xml_path
    so.addParam("allowfullscreen","true"); 
    so.write("flashcontent");
    So at the beginning I had 2 different projects with an HTML page for each.
    Now I wan't to directly integrate the Gallery SWF into the Main SWF. And as you have seen I must give it some parameters such as the "xml_path" and "allowfullscreen". This must be done in ActionScript 3 and I don't know how...
    I think I have to use FlashVars but I don't know how. As I said before, I have tried using the loaderinfo.parameters, but it is in read-only...
    Do you have an idea of how I can make it work ?

  • How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)

    How do I get my ipod to play a playlist from reverse order? (Start with recently added song instead of first added)
    So I'm adding new songs to a very old playlist? Is there anyway that when I add them, they automatically go to top of playlist? How about getting one song to the top of a playlist.  That drag to arrange function is very annoying because it is slow and the playlist does not scroll up very well on a PC.

    Make a new playlist by pressing the little plus button at the very lower left corner of iTunes. An new playlist will appear in the Source pane called "untitled playlist". While the name is highlighted, you can change it to whatever you want. Drag all of the tracks from all the albums that comprise a single book to that playlist. Sync that playlist to your iPod.

  • How can I build a table with the time values of a timer from a while loop

    Hi:
    I have a question concerning building a table:
    Every 100ms I read a value from a sensor (while loop with a timer). I would like to build a table with the actual time and the concerning value. For example:
    0msec         1V
    100msec     2V
    200msec     3V
    300msec     4V
    etc.
    If I use the Express VI for building a table, I always get the date and time, but I don't need the date and the time is in the following format: HH:MMS, which is nonsensical for me as I can't differentiate within msec. Can I change the format anywhere?
    Can I also save the table to a file or even to an Excelsheet? How can I do that?
    Thanks for your help!

    Hi Craig:
    thank you very much. To solve the mystery : ) :
    I want to drive a stepper motor with a specific frequency. To get the current degree value of the motor I would like to measure the current time (from the beginning of the move on). (With a formula I get the degree value out of the time)
    Concurrently I would like to get data from a torque sensor and from a pressure sensor. That's why I asked you about the time and the table. The measurement should start with the movement of the motor. How can I do that? Right now I have different block diagrams (different while loops) (see attachment) and I would like to put them in one.
    I haven't done the block diagram for the pressure sensor yet, so there is only the one for the torque sensor and the one for the motor.
    I also would like to set a mark in the table when the voltage value of an analog input gets under a specific threshold value. Is that possible?
    I'm sorry, I'm a novice in LabVIEW. But maybe you can help me.
    Thank you very much!
    Steffi
    Attachments:
    motor.vi ‏238 KB
    sensor.vi ‏59 KB

  • How do I install and build and extension with extension builder 2.1?

    Honestly, I am beyond frustrated right now.
    1. Extension Builder 3 - This will only install and run with Eclipse. JRE 1.7.
    This only allows me to use Extendscript to write scripts with. Extendscript is so frustrating to use. It seems like there are a lot of missing properties for working with color models in illustrator. The documentation is also terrible for Extendscript. Something that seems like it would be simple to do like export an RGB JPEG is impossible to spec out in the EXPORT JPEG settings. Its also impossible to set the color space of a NEW AI document unless you use the add(); instead of addDocument(); There are conflicting incomplete properties of both methods. If you use one, one set of settings is missing if you use the other another set is missing... WHAT IS SOMEONE SUPPOSED TO DO???
    2. Flash Builder 4.7 will not run Extension Builder 3.
    3. I bought Extension Builder 2.1 which is supposed to install Flash Builder 4.6, but the installation keeps failing right at the end. This apparently also requires that you use JRE 1.6 which is not compatible with Mavericks.
    This all seems impossible... how in the heck are people learning how to do build extensions, its a surprise that any exist at all. If they do They are likely not building them with the Adobe tools. I know enough about code to be dangerous but don't have a doctorate in troubleshooting all of these compatibility, and documentation issues.
    All I want to do is write an extension, or a script that allows me to
    1. copy the art from two layers.
    2. color the background of the AI document to the background color of the original document
    3. resize art from both layers to fit on a 216 x 216 pixel square.
    4. Save the document as a: JPEG - ANTI-ALIAS SUPER SAMPLED - 150 DPI - RGB - MEDIUM QUALITY - CLIP TO ARTBOARD - WITH THE SAME NAME AS THE ORIGINAL FILE
    I AM AT MY WITS END WITH THIS WHOLE PROCESS. I AM ABOUT TO GIVE UP UNLESS SOMEONE CAN HELP GIVE ME A LITTLE INSIGHT.

    Hi,
    First of all, remember that Extension Builder 2.1 only supports building Flash based extensions which have been phased out. If you are building extensions for Creative Cloud and beyond, you should use HTML5. See more info here: Introducing HTML5 extensions | Adobe Developer Connection
    The installation is probably failing because you have some leftovers from a previous installation. The installer will detect if you have Flash Builder 4.5 or Flash Builder 4.6 installed (NOT Flash Builder 4.7). If it finds that you have Flash Builder 4.5/4.6 installed, it will attempt to install the plugin on top of it. If it does not detect Flash Builder 4.5/4.6, it will install Flash Builder 4.6 Premium.
    I highly recommend you look into the new HTML5 extensibility. Here you can find tons of resources: Adobe CEP Resources by Adobe-CEP
    Best regards,
    Hallgrimur

  • Flash SWF with Video file will not play in web page

    Hello Flash group,
    I have created a flash video file from a *.wmv file.
    myvideo.flv.
    I have used flash to build an swf file that plays the video
    (with a default skin).
    I have then imported the media file into an html page using
    Dreamweaver. I did not import the flv file, but the swf file with
    the "video" in it.
    The page plays find on my development server (where
    Flash,Dreamweaver, etc is installed).
    When I moved the html page, the flv file, the swf file and
    the skin to my production webserver (linux and apache)
    the flash files do not show up on the web page. The dev
    server is a windows XP running apache 2.2)
    Any ideas on what I need to do???
    thanks,
    eholz1

    It may cause by any of the reason below:
    - You have uploaded the flv file to the wrong directory
    - Your flv file path/name is incorrect. check all case
    sensitive etc.
    - Your web server doesn't support FLV MIME type.
    Another similar topic here:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=194&threadid =1263131&highlight_key=y&keyword1=MIME
    Hope it helps.

  • How to build a array with collected data

    Hi,
    I have collected data from serial port with VISA. Now I want to build a array with 100 date points. Should I connect VISA Read with Build Array directly? How to do it?
    PS: All of them are in a While Structure.
    Thank you!

    An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
    Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
    Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
    Attachments:
    Crude Build Array.PNG ‏4 KB
    Better Build Array.PNG ‏6 KB

  • How to build a array with high sampling rates 1K

    Hi All:
    Now I am trying to develop a project with CRio.
    But I am not sure how to build a array with high sampling rates signal, like >1K. (Sigle-point data)
    Before, I would like to use "Build Arrary" and "Shift Register" to build a arrary, but I found it is not working for high sampling rates.
    Is there anyother good way to build a data arrary for high sampling rates??
    Thanks
    Attachments:
    Building_Array_high_rates.JPG ‏120 KB

    Can't give a sample of the FPGA right now but here is a sample bit of RT code I recently used. I am acquiring data at 51,200 samples every second. I put the data in a FIFO on the FPGA side, then I read from that FIFO on the RT side and insert the data into a pre-initialized array using "Replace Array subset" NOT "Insert into array". I keep a count of the data I have read/inserted, and once I am at 51,200 samples, I know I have 1 full second of data. At this point, I add it to a queue which sends it to another loop to be processed. Also, I don't use the new index terminal in my subVI because I know I am always adding 6400 elements so I can just multiply my counter by 6400, but if you use the method described further down below , you will want to use the "new index" to return a value because you may not always read the same number of elements using that method.
    The reason I use a timeout of 0 and a wait until next ms multiple is because if you use a timeout wired to the FIFO read node, it spins a loop in the background that polls for data, which rails your processor. Depending on what type of acquisition you are doing, you can also use the method of reading 0 elements, then using the "elements remaining" variable, to wire up another node as is shown below. This was not an option for me because of my programs architecture and needing chunks of 1 second data. Had I used this method it would have overcomplicated things if I read more elements then I had available in my 51,200 buffer.
    Let me knwo if you have more qeustions
    CLA, LabVIEW Versions 2010-2013
    Attachments:
    RT.PNG ‏36 KB
    FIFO read.PNG ‏4 KB

  • Unloading a loaded external SWF with a close button on the external SWF to unload

    I have found some discussion on this topic but I am still having trouble getting it to work and was hoping to get some help here.
    Here I have a file: http://www.dril-quip.com/test/main.swf
    I have: main.swf (a menu) and I have module.swf (content)
    If you navigate to Subsea Wellhead Systems/SS-15 BigBore II and click on that I have it load an external swf which covers most of the parent.
    So far so good. My problem is unloading the loaded 'Child' swf with the button provided on the loaded 'Child' swf.
    below is the code I used to load the file but I cant, for the life of me, find a way to unload it.
    var bigboreLoader:Loader = new Loader();
    btnbb2.addEventListener(MouseEvent.MOUSE_UP, bigborecontent);
    function bigborecontent(event:MouseEvent):void{
    var bigboreRequest:URLRequest = new URLRequest("moduletemplate.swf");
    bigboreLoader.load(bigboreRequest);
    stage.addChild(bigboreLoader);
    I am certain it requires the Child to communicate with the parent somehow but I am at a loss. If I could get a bit of advice or a link to something deal with this, it would be a big help. I just need to have my links load my modules and the remove them when the close buttong is hit on the loaded swf. I promise I have done searches and I admit I have found asnwers but still they are not working. I found the code below:
    Main FLA:
    function removeF() {
    removeChild(bigboreLoader);
    var bigboreLoader:Loader = new Loader();
    btnbb2.addEventListener(MouseEvent.MOUSE_UP, bigborecontent);
    function bigborecontent(event:MouseEvent):void{
    var bigboreRequest:URLRequest = new URLRequest("moduletemplate.swf");
    bigboreLoader.load(bigboreRequest);
    stage.addChild(bigboreLoader);
    EXTERNAL FLA:
    btnClose2.addEventListener(MouseEvent.CLICK, bigborecontent);
    function bigborecontent(myevent:MouseEvent):void {
    MovieClip(parent.parent).removeF();
    I think I have a misunderstanding of the code. Thanks for any help you might be able to provide.

    This was the original code I got:
    Main FLA: (on AS layer inside DropDownButton Movie Object)
    function removeF() {
    removeChild(myLoader);
    var myLoader:Loader=new Loader ();
    page1_mc.addEventListener(MouseEvent.CLICK, page1content);
    function page1content(myevent:MouseEvent):void {
    var myURL:URLRequest=new URLRequest("page1.swf");
    myLoader.load(myURL);
    addChild(myLoader);
    EXTERNAL FLA: (on main time line of this file)
    close_mc.addEventListener(MouseEvent.CLICK, closeMC);
    function closeMC(myevent:MouseEvent):void {
    MovieClip(parent.parent).removeF();
    Main.FLA
    myLoader=bigboreLoader (my new loader)
    page1_mc=btnbb2 (the button who event will call external swf)
    page1content = bigborecontent (name given to SWF being loaded???)
    myURL=bigboreRequest (my new URLrequest for bigbore)
    page1.swf=moduletemplate.swf (actual address of what I am loading)
    External.FLA
    close_mc=button that will close external swf
    closeMC=movie clip to close?

  • FlexUnit4SampleCIProject will not build for me with build.air.xml

    I have I6 of Burrito. I downloaded the FlexUnit4SampleCIProject and followed set-up instrucitons on this page:
    http://docs.flexunit.org/index.php?title=Ant_Task
    When I leave in all the default source and run it using:
    ant -v -f build.air.xml clean package
    it goes for awhile and then fails with a:
    BUILD FAILED
    /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/build .air.xml:65: Could not create application descriptor
    What am I doing wrong? Here is the full log from terminal on my Mac running Snow Leopard with ant 1.8:
    admin-MacBookPro:FlexUnit4SampleCIProject brantner$ ant -v -f build.air.xml clean package
    Apache Ant version 1.8.1 compiled on September 21 2010
    Buildfile: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/buil d.air.xml
    Detected Java version: 1.6 in: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home
    Detected OS: Mac OS X
    parsing buildfile /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/buil d.air.xml with URI = file:/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject /build.air.xml
    Project base dir set to: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject
    parsing buildfile jar:file:/usr/share/java/ant-1.8.1/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/usr/share/java/ant-1.8.1/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file
    [property] Loading Environment env.
    Build sequence for target(s) `clean' is [clean]
    Complete build sequence is [clean, init, compile, test, package, ]
    clean:
       [delete] Deleting directory /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et
       [delete] Deleting directory /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/bin
       [delete] Deleting directory /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/dist
       [delete] Deleting directory /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/report
       [delete] Deleting directory /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et
    Build sequence for target(s) `package' is [init, compile, test, package]
    Complete build sequence is [init, compile, test, package, clean, ]
    init:
        [mkdir] Created dir: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et
        [mkdir] Created dir: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/bin
        [mkdir] Created dir: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/report
        [mkdir] Created dir: /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/dist
    compile:
        [mxmlc] Loading configuration file /Applications/Adobe Flash Builder 4.5/sdks/4.5.0/frameworks/flex-config.xml
        [mxmlc] Required RSLs:
        [mxmlc]     framework_4.5.0.20135.swf with 1 failover.
        [mxmlc]     textLayout_2.0.0.232.swf with 1 failover.
        [mxmlc]     spark_4.5.0.20135.swf with 1 failover.
        [mxmlc]     sparkskins_4.5.0.20135.swf with 1 failover.
        [mxmlc]     mx_4.5.0.20135.swf with 1 failover.
        [mxmlc] /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/bin/Main.swf (63438 bytes)
    test:
    [flexunit] Validating task attributes ...
    [flexunit] Generating default values ...
    [flexunit] Using the following settings for compilation:
    [flexunit]     FLEX_HOME: [/Applications/Adobe Flash Builder 4.5/sdks/4.5.0]
    [flexunit]     player: [air]
    [flexunit]     sourceDirectories: ["/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/sr c/main/flex"]
    [flexunit]     testSourceDirectories: ["/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/sr c/test/flex"]
    [flexunit]     libraries: ["/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/li bs/flexunit-aircilistener-4.1.0.swc","/Users/brantner/Documents/burrito/flexunit-flexunit- d3a56a1/FlexUnit4SampleCIProject/libs/flexunit-cilistener-4.1.0.swc","/Users/brantner/Docu ments/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/libs/flexunit-core-flex-4 .1.0.swc","/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIPr oject/libs/flexunit-uilistener-4.1.0.swc"]
         [null] Executing '/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java' with arguments:
         [null] '-jar'
         [null] '/Applications/Adobe Flash Builder 4.5/sdks/4.5.0/lib/mxmlc.jar'
         [null] '--version'
         [null]
         [null] The ' characters around the executable and arguments are
         [null] not part of the command.
         [null] Output redirected to property: SDK_VERSION
    [flexunit] Found SDK version: 4
    [flexunit] Created test runner at [/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/tar get/bin/TestRunner.mxml]
    [flexunit] Compiling test classes: [org.flexunit.demo.EchoPanelTest, org.flexunit.demo.SampleTest]
    [flexunit] Executing '/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java' with arguments:
    [flexunit] '-Xmx256M'
    [flexunit] '-jar'
    [flexunit] '/Applications/Adobe Flash Builder 4.5/sdks/4.5.0/lib/mxmlc.jar'
    [flexunit] '+flexlib'
    [flexunit] '/Applications/Adobe Flash Builder 4.5/sdks/4.5.0/frameworks'
    [flexunit] '+configname=air'
    [flexunit] '-output'
    [flexunit] '/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/tar get/bin/TestRunner.swf'
    [flexunit] '-source-path'
    [flexunit] '/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/src /main/flex'
    [flexunit] '/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/src /test/flex'
    [flexunit] '-library-path+=/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4Samp leCIProject/libs/flexunit-aircilistener-4.1.0.swc'
    [flexunit] '-library-path+=/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4Samp leCIProject/libs/flexunit-cilistener-4.1.0.swc'
    [flexunit] '-library-path+=/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4Samp leCIProject/libs/flexunit-core-flex-4.1.0.swc'
    [flexunit] '-library-path+=/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4Samp leCIProject/libs/flexunit-uilistener-4.1.0.swc'
    [flexunit] '-headless-server=true'
    [flexunit] '/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/tar get/bin/TestRunner.mxml'
    [flexunit]
    [flexunit] The ' characters around the executable and arguments are
    [flexunit] not part of the command.
    [flexunit]
         [null] Error redirected to property: MXMLC_ERROR
         [null] Loading configuration file /Applications/Adobe Flash Builder 4.5/sdks/4.5.0/frameworks/air-config.xml
         [null] /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/targ et/bin/TestRunner.swf (491869 bytes)
    [flexunit] Using the following settings for the test run:
    [flexunit]     FLEX_HOME: [/Applications/Adobe Flash Builder 4.5/sdks/4.5.0]
    [flexunit]     haltonfailure: [false]
    [flexunit]     headless: [false]
    [flexunit]     display: [99]
    [flexunit]     localTrusted: [true]
    [flexunit]     player: [air]
    [flexunit]     port: [1024]
    [flexunit]     swf: [/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/tar get/bin/TestRunner.swf]
    [flexunit]     timeout: [60000ms]
    [flexunit]     toDir: [/Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/tar get/report]
    [flexunit] Setting up server process ...
    [flexunit] Starting server ...
         [null] Executing '/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java' with arguments:
         [null] '-jar'
         [null] '/Applications/Adobe Flash Builder 4.5/sdks/4.5.0/lib/adt.jar'
         [null] '-version'
         [null]
         [null] The ' characters around the executable and arguments are
         [null] not part of the command.
         [null] Output redirected to property: AIR_VERSION
    [flexunit] Opening server socket on port [1024].
    [flexunit] Waiting for client connection ...
    BUILD FAILED
    /Users/brantner/Documents/burrito/flexunit-flexunit-d3a56a1/FlexUnit4SampleCIProject/build .air.xml:65: Could not create application descriptor
        at org.flexunit.ant.launcher.commands.player.AdlCommand.createApplicationDescriptor(Unknown Source)
        at org.flexunit.ant.launcher.commands.player.AdlCommand.prepare(Unknown Source)
        at org.flexunit.ant.launcher.contexts.DefaultContext.start(Unknown Source)
        at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
        at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.Target.execute(Target.java:390)
        at org.apache.tools.ant.Target.performTasks(Target.java:411)
        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1397)
        at org.apache.tools.ant.Project.executeTarget(Project.java:1366)
        at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
        at org.apache.tools.ant.Project.executeTargets(Project.java:1249)
        at org.apache.tools.ant.Main.runBuild(Main.java:801)
        at org.apache.tools.ant.Main.startAnt(Main.java:218)
        at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
        at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
    Total time: 18 seconds
    admin-MacBookPro:FlexUnit4SampleCIProject brantner$
    Thanks,
    Brian

    Mean the one for i6.. we monitor that as well.
    Or just reach out to me offline:
    my last name at digitalprimates dot net
    Mike

  • Deploying swf with resources into a single sis on Nokia

    Hi finally i have my first question on the mobile forum . I am trying to package a sis file which will contain the main swf and a settings text file.
    The problem is the i have to compile them to deliver both together on Nokia device for flash lite 2.1. There is not a single decent packager out there as o see that solves my issue.
    Generally i use Nokia carbide. Here is a glimpse of my PKG file:
    ; Add any installation notes if applicable
    ;"MobiStore.txt"          -"!:\private\E4B653CF\MobiStore.txt"
    ;required for application to be covered by backup/restore facility
    "..\sis\backup_registration.xml"          -"!:\private\E4B653CF\backup_registration.xml"
    ;Add all the files needed by your flash app here. don't forget to set correct folder names!
    "..\data\MobiStore.swf" - "!:\private\E4B653CF\MobiStore.swf"
    "..\data\settings.txt" - "!:\private\E4B653CF\settings.txt"
    Now what happens is that after the application installs on a actual Nokia device It gives error "private\E4B653CF\settings.txt" Not found !!
    I confirm that the file is there manually but the swf cannot find it. In the swf i load the file "settings.txt" using loadvars.load method and providing just the file name "settings.txt",  no sub-folders or anything. So basicaly the file "MobiStore.swf" and "settings.txt" are in same folder but when i run the application it says:
    "private\E4B653CF\settings.txt" Not found !!
    I will really appreciate if some one can help me out with this. How to package a swf with resource files into sis and deploy on a real device.

    Hey,
    i have the same problem. Flash Lite 3.1., N97 The application is published with network only. I have even tried local only with same results.
    When i try to load an image with loadMovie(image.jpg), image is not show. But this only occurs when the application is installed on E:/private/UID/. If i install the application on C:, everything is working ok.
    Also same problem with loading images from http://127.0.0.1:8888/GetImage/image.png. If installed on E:, images are not shown, but if installed on C:, all images are visible. Is this problem with security? My servlet http://127.0.0.1:8888/crossdomain.xml is never called.
    Simon

Maybe you are looking for