Bulk Firmware Upgrade Option in Systems Settings Tab

Has anyone tried to use the bulk firmware upgrade option in the Systems Settings tab? I was able to get all the set up done and chose the 8 cameras that I needed to upgrade. The job seemed to finish successfully. However when I checked the firmware on the 8 cameras that needed the upgrade, THEY WERE NOT UPGRADED!! Instead of upgrading the cameras selected via checkbox, the job chose the first 8 cameras on the original 2600 model list, completely ignoring the cameras that I had actually SELECTED FOR THE UPDATE!!!
Is anyone else having trouble with this dialog?
Cisco, can you repair this ASAP!!!
Thanks.
ka

Kim,
We've experienced the same problem and it is very frustrating. We had to modify the bugfix workaround because it didn't quite work for us either. Here's what we found.
- It doesn't matter if you sort by column name or not; the utility will randomly pick a camera from the filtered list.
- If you write a filter that captures all of the cameras you need to update, and update all of them, it will update as expected.
- If cameras are failing using the utility, check to see if you can install manually. You may be getting bit by the "Bad Magic Number" bug, which requires you to set your camera name back to it's default.
We found ourselves updating all the cameras for a specific location with the same model all at once. We'd schedule a brief downtime with the department and do it all at once. Of course, we tested this in a lab environment first to make sure the firmware didn't break anything.
As for "Not In Recommended Firmware", this worked for us on 4500E cameras as long as we specified what our "Recommended" firmware was under the "Manage" firmware tab.
This was all using 7.2.0. We haven't installed any firmware updates since going to 7.2.1.

Similar Messages

Network settings tab is blank

Hi,
I have connected a Compact Rio 9068 directly to my computer (HP EliteBook 840 G1, Windows 7), and the system appears in the tree under Remote systems in MAX. However, the problem is that I can only see information under the System Settings tab, while the Network Settings tab is entirely empty (blank white page). I have tried to refresh and re-boot, log in as admin, but it doesn't help. I assume that I have to change some network settings on my computer but I do not know which and still think it is strange that nothing at all appears under this tab.The windows firewall is set to accept NI MAX for both office/home and open networks. Can anybody help? Below you see how it looks in MAX for the two tabs.
Regards,
Gloria
Solved!
Go to Solution.

Hi Klas,
and thank you for your thorough response. But the network settings are still not visible.
I have checked both local and wired network to obtain IP adress automatically for TCP/IPv4, these settings were already default automatic so I did not change this. I've also deactivated the windows firewall completely. I can not find any other firewalls, have McAfee protection installed without firewall. The IP adress range stays the same under System Settings.
When I look at my networks in the cmd window, the information in the figure below is shown, (unfortunately in swedish), but the upper network is the primary wireless connection and the lower is Ethernet to local network connection. Both say that DHCP is active, is this correct? My computer is standing alone with direct connection to cRIO port 1 and wireless access to a network (hib.no) at my work place is active, should I turn all wireless connections off? I have deactivated by pressing the wireless button on my keyboard, so that it says "not connected" to the wireless network in the cmd window, but it does not change anything in MAX.
The latest Labview version and Real-time module is installed from NI download webpages, Real time module is also shown when looking in the software tree in MAX (see figure below).
I have followed the steps given on the NI support pages without any problems until I get to the network settings:
http://www.ni.com/getting-started/install-software/compactrio.
Also, I power off the cRio and restart my computer, and refresh in MAX between all steps that I try.
Kind regards,
Gloria

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

Some options couldn't be displayed in "Adobe PDF Settings" tab

I am using Acrobat x pro's PDF Printer, and want to deselect some options in the "Adobe PDF Settings" tab within "Adobe PDF printing preferences", but several options couldn't be display. they are
Rely On System Fonts Only; Do Not Use Document Fonts
Delete Log Files For Successful Jobs
Ask To Replace Existing PDF File
It is right with Acrobat 9.4 pro, but it is not normal with Arobat 9.4.3 or Acrobat x. How can i fix this problem?
os: Windows Server 2003 standard SP2 simplified chinese version

I believe you can set these preferences within the Distiller application.
No you can't.
What I want is to create postscript files(.eps) and embed the fonts in
them by selecting "print to file" of PDF Printer, so I don't know
whether it works to set options in Distiller.
If you're only looking to create a PS file you can use one of the Postscript-compatible drivers that come with Windows, and set them to print to file.

Remote Desktop Settings missing from Remote Tab of System Settings

My Screen:
What it should be:
Good day, all. Please I need urgent help here. I have a problem using Remote Desktop.
My system is a 64-bit Windows 7 Ultimate with SP1 preinstalled.
Let me give us a synopsis of the problem.
Since the system was purchased, I have never had to remote into it. But I have used it to remote desktop to other PCs (that is, I have never used
it has a host, only as a client). However, last week I decided to set it up so that I can remotely connect to it. I went to the Remote Tab in System settings, and I discovered the bottom half was missing - only Remote Invitation settings were displayed.
I searched the web to try to solve the problem myself. I could only come up with 2 causes, generally:
If the system is Home Premium or below, which is certainly not the case here. It is the Ultimate version I have.
Some people complained that they had the exactly the same problem after installing SP1, and that when they uninstalled it, the Remote Desktop settings in Remote Tab of System settings came back.
However, I can't uninstall SP1 since it came preinstalled, and then that is not an option for me, given it contains several security fixes and updates.
Also some people said
the problem was solved be re-entering a correct product key for Windows, and re-activating Windows (+reboot).
I have tried this but did not get the required help.
My system is fully updated with all Microsoft patches till date, which means I have RDP 8.0 and RDP 8.1 client installed.
I have also tried
re-registering the dll: (regsvr32 c:\windows\system32\remotepg.dll),
to no avail.
I have checked the registry settings, Windows Firewall and made sure the remote desktop services are running in services.msc.
All these I have tried.
As I said, I have no problem connecting as a client to other systems. The issue is connecting to this system, by setting RDP here, but the settings
are missing.
Please, what is the solution? I don't want a clean install, or anything that would require to start re-updating the system.
I prefer a direct tackle of this error
(Definitely, a windows component is corrupted).
Thank you very much, and God bless.
P.S: I have read ALL the other threads that are similar to this, but NONE of them has SOLVED my problem.
So, please, please, do not delete my thread or mark it as answered until this problem has been solved, please.
I need a WORKING SOLUTION to this please.
Once again, thanks and God bless.

Hi,
Let’s uninstall the RDP 8.0 first, then check the result:
wusa.exe /uninstall /kb: 2592687
It would roll back to RDP 7.0.
Also, run SFC command:
Use the System File Checker tool to repair missing or corrupted system files
http://support.microsoft.com/kb/929833
Alex Zhao
TechNet Community Support

How do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable. The TV says "no signal. I do not see TV as an option in the display tab of system prefer

how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable. The TV says "no signal. I do not see TV as an option in the display tab of system preferences. what else do I need to do?

First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
Matt

I have an ipad 2, MC769x it is running 4.3.3 (8j2) i have been trying to upgrade to ios 5 or higher but a) I don't have a software update option on my Settings / General screen. And b) when I go into itunes I don't get tihe options suggested on the forums

I have an ipad 2, MC769x it is running 4.3.3 (8j2) i have been trying to upgrade to ios 5 or higher but a) I don't have a software update option on my Settings / General screen. And b) when I go into itunes I don't get tihe options suggested on the forums. I really want to upgrade my ipad as I want to buy and install some apps that are only available from ios5 onwards. I have been a big apple fan but I am now wondering if my ipad2 was a mistake.

If your are using IOS 4, see below.
http://support.apple.com/kb/HT4972

How to upgrade to iOS 6? I have an iPad 2 mc916ll but not "software download" option in my settings. Thanks

How to upgrade to iOS 6? I have an iPad 2 mc916ll but not "software download" option in my settings. Thanks

Settings>General>Software Update is only available in IOS 5 and above.
If you are using IOS 4, you need to connect to iTune (computer) to update software.
http://support.apple.com/kb/HT4972

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

Upgrade option took different version of my system!

After installing 10.5 with the upgrade option, I noticed the installer upgraded the system from an older backup with a different home folder name (A), and then put my most recent library into the users folder under a different name (B). Thus, the data I want to be current on my computer is put into an archive library B, and I don't know how to get that into A so that it can be used by the system.
A while back I had problems booting while in 10.3, and I did a system restore using the install disk. Then, essentially, the 10.5 installer took the library of my system right before my boot problem (A) when it upgraded, and put B, the library of my system after the boot problem, into the users folder.
Any solutions?
Let me know if this doesn't make sense or if I need to dig up that boot problem.
Thanks much,

anyone?
Can I just replace the old library with the new one?

Upgraded to Firefox 23 and now my yahoo bookmarks don't have the option to open all tabs in a folder. How can I do this.

The option to open all tabs in a folder is not available any more on my yahoo toolbar. On this computer and my home computer which I just upgraded to firefox 23 and that option disappeared. I need to open all tabs in a folder at one.

Hi ziccs, is the missing feature to open a group of bookmarks all at once in separate tabs?
I haven't explored the Yahoo! toolbar in detail, but it was just updated recently. I noticed the description "new user interface" on the versions page. You also can use that page to re-install the earlier version and see whether the missing function returns.
https://addons.mozilla.org/en-us/firefox/addon/yahoo-toolbar/versions/

When trying to upgrade to iOS 6 after a few minutes message pops up: unable to complete download, options cancel or settings? what do I need to change in the settings?

When trying to upgrade to iOS 6 after a few minutes message pops up: unable to complete download, options cancel or settings? what do I need to change in the settings? What have I set in settings that is stopping my upgrade??

Sorry, good network connection, happily downloaded for 15 minutes before this popup appeared... Staying with iOS 5.1.1 for now hoping Apple can sort it..oO

Toshiba Stor.E tv 1TB PA4209E-1HJ0 SYSTEM FIRMWARE UPGRADE?

Hey
I just purchased a toshiba stor.E tv 1tb multimedia player but it doesn't support mkv video formats & others like rmvb
Is there any system firmware upgrade that i can flash into the bios?
If so pls provide me with the link to it ?
Note : i did not find it on the support page
But i have read that the Stor.E tv 2TB's support the video file formats i'm looking for.
Would it be possible to use the same firmware bios on the 1Tb ?
thanks & regards

hey there,
i just purchased the same hdd. my problem is: after some trys to make it compatible to my mac (i created two partitions - one fat32 and the other in mac-format) it didnt work any longer. i mean i dont have access to the data when i connect it to my tv. even after turning it back to the former status (one fat partition) its the same. i can see the screen, when i turn it on, but i dont have a menu to choose any file. setup is working as well...
so obviously its not possible to get any firmware or other support. does anyone have a solution? maybe a soft-/firmware i can use???
thanks,
stefan

My ipad won't give me the option to upgrade from op system 5.1.1 to higher as the update option say's I'm up to date.

My ipad won't give me the option to upgrade from op system 5.1.1 to higher as the update option say's I'm up to date.

A first generation iPad can't be updated past 5.1.1.
(119512)

RAM ctrlpanel settings system general tab does not match actual installed

i have a mbp mid2009 2.66 ghz core 2 duo 4 gig of 1066Mhz DDR3 SDRAM
in my bootcamp xp sp2 side ctrlpanel>settings>system>general tab
it says:
Computer:
Intel(R) Core(TM)2 Duo CPU
P8800 @ 2.66 GHz
2.65 GHz, 2.72 GB of RAM
Physical Address Extension
why does it say 2.72 instead of 4 GHz of RAM?
is it because of the MacOsx/Windows (Bootcamp) partition?
ty

XP is not capable of using more than 3 GBs of RAM.

Bulk Firmware Upgrade Option in Systems Settings Tab

Similar Messages

Maybe you are looking for