Bulk Load into SAP system from external application

Hi,
Is there a way to perform a bulk load of data into a SAP system from an external application?
Thanks
Simon

Hello,
My external application is a C program and I think I want to use IDocs and RFC to communicate with the SAP system.
Simon

Similar Messages

  • Data load into SAP ECC from Non SAP system

    Hi Experts,
    I am very new to BODS and I have want to load historical data from non SAP source system  into SAP R/3 tables like VBAK,VBAP using BODS, Can you please provide steps/documents or guidelines on how to achieve this.
    Regards,
    Monil

    Hi
    In order to load into SAP you have the following options
    1. Use IDocs. There are several standard IDocs in ECC for specific objects (MATMAS for materials, DEBMAS for customers, etc., ) You can generate and send IDocs as messages to the SAP Target using BODS.
    2. Use LSMW programs to load into SAP Target. These programs will require input files generated in specific layouts generated using BODS.
    3. Direct Input - The direct input method is to write ABAP programs targetting on specific tables. This approach is very complex and hence a lot of thought process needs to be applied.
    The OSS Notes supplied in previous messages are all excellent guidance to steer you in the right direction on the choice of load, etc.,
    However, the data load into SAP needs to be object specific. So targetting merely the sales tables will not help as the sales document data held in VBAK and VBAP tables you mentioned are related to Articles. These tables will hold sales document data for already created articles. So if you want to specifically target these tables, then you may need to prepare an LSMW program for the purpose.
    To answer your question on whether it is possible to load objects like Materials, customers, vendors etc using BODS, it is yes you can.
    Below is a standard list of IDocs that you can use for this purpose to load into SAP ECC system from a non SAP system.
    Customer Master - DEBMAS
    Article Master - ARTMAS
    Material Master - MATMAS
    Vendor Master - CREMAS
    Purchase Info Records (PIR) - INFREC
    The list is endless.........
    In order to achieve this, you will need to get the functional design consultants to provide ETL mapping for the legacy data to IDoc target schema and fields (better to ahve sa tech table names and fields too). You should then prepare the data after putting it through the standard check table validations for each object along with any business specific conversion rules and validations applied. Having prepared this data, you can either generate flat file output for load into SAP using LSMW programs or generate IDoc messages to the target SAPsystem.
    If you are going to post IDocs directly into SAP target using BODS, you will need to create a partner profile for BODS to send IDocs and define the IDocs you need as inbound IDocs. There are few more setings like RFC connectivity, authorizations etc, in order for BODS to successfully send IDocs into the SAP Target.
    Do let me know if you need more info on any specific queries or issues you may encounter.
    kind regards
    Raghu

  • Insert into SAP table from external program

    Hi Gurus,
    I need to perform an insert of several records into a couple of SAP tables from an external program.
    Do you know of an RFC (if it is remote enabled the better) that allows me to specify the table and records to perfom an insert?
    Many thanks
    Mauricio Pego

    I don't know ABAP and wanted to avoid writing my own function if one standard exists.
    My requirement stands like this, I have a few z tables that need to populate from my C# application by use of the .Net connector.
    I haven't found a BAPI or RFC that allows me to add records to any table, but I don't know all the RFCs.
    May be one of you passed throu this already.
    Mauricio

  • Taking the data from interactive forms and load the data into SAP system?

    hi all,
    I want to know how to take the data from interactive forms and load the data into sap system?
    if u have any sample scenario, explain with that.
    thanks in advance
    Raja

    Hello,
    Check the program...
    SAPBC480_DEMO.
    Check the below threads
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/88e7ea34-0501-0010-95b0-ed14cfbeb85a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bfbcd790-0201-0010-679d-e36a3c6b89fa
    Thanks
    Seshu

  • How to get the EXCEL file from web site (b2b) into SAP system?

    Hi Guys,
    I have a requirement of saving the excel file that has been send to SAP system from a B2B site.
    Currently there is a call to the SAP system from the B2B site via an RFC function ,this RFC functions gets the excel file as an input to the SAP system,i need to store this Excel file in the SAP  (as an excel file itself).
    How can i acheive this?
    Please suggest.
    Thanks ,
    Swati

    You can extract a date portion and  assign to the variable and then compare with GETDATE()
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How to load new hirearchys into BW system from R/3

    Hi
    For PROFIT_CT & 0Account Hirerachies in R/3 source system,
    a new hirearchy has been added and this new hirearchy need to load into BW system as it doesnt exists in BW system.
    But in infopackage selection this new hirerachy doesnt exists,hence I tried to find this new hierarchy by REFRESHING in Infopackage Hirerachy Selection tab.Even then this new hirearchy doesnt exists.
    But this new hirerachies exists in R/3 source system.
    Can anyone let me know how to load this
    Shankar

    Hi Barry
    Thanks for your message
    This Tcode KSH3 is for Cost Center Hierarchy but not for Profit center or Account .
    I checked in KCH3 & KDH3 tcodes for Profit center or Account hirerachies in R/3,
    Both the hirerachies are mentioned in top node in R/3
    But still these hierarechies doesnt exists in IP in BW
    Can you let me know little further
    Shankar

  • Upload bulk data into sap?

    hi all,
    let me know is there any methods to upload bulk data into sap and can same data be modified , delete , add. please correct me if i am wrong. what i know is that we can do with lsmw method, as i am new to lsmw method please let me know where to hunt for lsmw documentation.
    thanks,
    john dias.

    Hi John-
    According to SAP, The Data Transfer Workbench supports the automatic transfer of data into the system. The Workbench is particularly useful for various business objects with large amounts of data. It guarantees that data is transferred efficiently and ensures that data in the system is consistent.
    Further, The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
    For your purpose you might be helped by the following two links-
    'Data Transfer Workbench' - http://help.sap.com/saphelp_47x200/helpdata/en/0d/e211c5543e11d1895d0000e829fbbd/frameset.htm
    'Using the LSM Workbench for the Conversion' - http://help.sap.com/saphelp_46c/helpdata/en/0f/4829e3d30911d3a6e30060087832f8/frameset.htm
    Hope these links help,
    - Vik.

  • How can we upload the Time data into SAP system

    Dear all,
    ingeneral which method we can use to read the Time data and how can we upload that data into SAP system. Please any one can answer this asap.

    In the recent project that I have done.. the time data is uploaded from the external time recording machine.. in the form a file...
    The other way is through CATS... which in turn will populate the time entries as per hte work schedules... and will explicitly have to populate the deviations to the work scheudle by going through transactions..
    Please reward the points if it is helpful...
    Regards,
    Suvan,
    Yash Technologies Pvt Ltd, Hyderabad.
    Message was edited by:
            Suvan

  • Launch a RFC in a SAP system from Redwood CPS

    Hi,
    How can I launch a rfc in a SAP system from Redwood ?
    Ex : in SE37, the function DATE_GET_WEEK, with a date (DD.MM.YYYY) as input parameter returns the corresponding week (YYYYWW)
    Regards.

    Hi,
    SAP CPS uses an RFC to communicate with a target SAP system via the XBP interface so that Jobs can be executed.  The CPS executable only knows of the calls that are appropriate to that interface or function modules created when CPS transports are loaded.  If there was an RFC type interface that exposed your function to an external executable then of course CPS could execute the executable.
    Regards,
    Simon

  • Master data upload into SAP system

    Hello,
    I want to know if there is any standard method to upload material master, customer master, vendor master and finance master data into SAP system.
    I am not referring to LSMW's, BDC's and using BAPI's. I am aware of standard programs like RMDATIND for material master upload, RFBIDE00 for customer master upload and RFBIKR00 for vendor master upload. But these are using direct input method and SAP recommends this only for testing purpose. I am not sure if this could be really used in actual live scenarios.
    From some other posts in the forum, I came to know about some transactions like BDLR, SXDB and BMVO. Can some one tell me how to use these T.Codes?
    If some one has any detailed documentation on these T.codes or in general standard master data upload techniques please send it to [email protected]
    Thanks in advance,
    CMV

    Hi,
    Define the following attributes, using the F4 input help and F1 field help:
    Report
    Name of a registered program for this program type
    Variant
    You can only specify a variant with programs that are started directly.
    With direct input, data from the data transfer file undergoes the same checks as with the online transaction and is then transferred directly into the SAP System. The database is updated directly with the transferred data.
    For the documentation of other transactions please refer the correponding program documentation..which is more helpful,
    <b>Reward points if helpful,</b>
    Regards,
    jinesh

  • How to read xml reports from external application

    Hi All,
    I want to generate reports from SIEBEL Database and access those reports from external application(like BlackBerry application). I have gone through by some blogs and found that we can access the generated reports from an external application using the URL.
    When I use this URL on browser it gives me the xml file of the report. But I am unable to read this file from the Blackberry application.
    Thanks in advance

    Hi Angha,
    I want to invoke other portal application from my application.
    Portal URL's also get changed from one system to Other. Prototype Portal->Development Portal -> Quality Portal->Production Portal>
    All the above Portal URL will be different.
    I want trigger another application dynamically.
    Thx & Rgds
    AW

  • Load username and password for external application?

    How to load username and password for external application?
    For each user, we should take its Portal username and password for one specific external application. How to do that ?
    Regards.

    ABSOLUTLY YES !!!!
    We already know the external application login information for each user and we want to by pass this user task. (Specially because the user itself doesn't know its username/password for the external appli). In fact we are trying to integrate IStore product to Portal by using this mechanism.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Kamalendu Biswas ([email protected]):
    If you define an external application then SSO users can populate user information by themselves.
    Are you syaing that you want to populate user information automatically (bulk lodad)?<HR></BLOCKQUOTE>
    null

  • Re: uploading pdf file farmat into sap system

    Hi  Sap Guru's
    One of my client have requirement  of uploading PDF file into sap system
    client is getting scan copy in PDF format of sales order that  order , material number and qty should be uploaded into sap through
    va01
    as clent havint 200 customers and all tha customers having different styles of format in pdf
    i know that we can do by webdyopro / adobe forms  but for one customer i can do but here 200 customer are having different
    format
    can any one suggest me this requirement is fulfilled by SAP-XI, OR ANY OTHER
    Thanks & Regards
    T Bharat

    Hi,
    you can try using the method cl_gui_frontend_services=>file_open_dialog, this will open a popup allowing
    you to browse and selected the desired files from your system.
    Use this method along with the function module GUI_UPLOAD to upload all the desired files and their contents in SAP.
    Hope this was useful.
    Thanks and regards,
    Adithya.

  • Once the Add-on is loaded into SAP B1 it is genearting follwing the warning message

    Hi Experts ,
    Once the Add-on is loaded into SAP B1 it is genearting follwing the warning message  is "Conversion from string """" to type 'Double' is not valid "
    Please find the attachment
    Thanks for the Support,
    Satish.

    Hi,
    At least one of addon function is to convert a string to number. If that string is empty, it may cause error. Need verification before converting.
    Thanks,
    Gordon

  • How to stop vdbench from external applications? What are the impacts?

    I am using vdbench to test following scenario:
    1) Start vdbench - do read/write (I use poweshell start-process to start vdbench which returns me the process object )
    2) Poll for particualr system event(my test condtion). When the event happens stop read/write ASAP(To stop the process I use powershell Stop-process and pass process object as the argument. This actually stops IO as seen task manger)
    3) Continue testing
    I want to understand
    1) Are the steps followed correct?
    2) What is the correct method to stop vdbench from external application?
    Regards
    Jugari

    An other thought, that maybe is of interest to you, coming in the next version of Vdbench.
    A conversation with one of my internal users:
    It does not make sense to look at current Vdbench output trying to figure out what is happening when.
    This locks us in to tricks and guessing and prevents me from make changes to the output.
    Monday I will create a new file in Vdbench: status.html
    This file will only be there for any kind of wrappers to see what is going on.
    I'll make sure that the file contents are flushed to the file system as soon as a line of text has been written.
    * Vdbench status
    * The objective of this file is to contain easily parseable information about the current state of Vdbench.
    * This then can serve as an 'official' interface for any software monitoring Vdbench.
    * Each line of output will be immediately flushed to the file system, making its content accessible by any monitoring program.
    * The values below are all tab-delimited.
    03/25/2015-13:42:44-MDT Starting slaves
    03/25/2015-13:42:44-MDT Slaves connected
    03/25/2015-13:42:44-MDT Query host configuration started
    03/25/2015-13:42:44-MDT Query host configuration completed
    03/25/2015-13:42:46-MDT Starting rd=rd1 For loops: None
    03/25/2015-13:42:48-MDT Warmup done rd=rd1 For loops: None
    03/25/2015-13:42:51-MDT Workload done rd=rd1 For loops: None
    03/25/2015-13:42:51-MDT Slaves done rd=rd1 For loops: None
    03/25/2015-13:42:51-MDT Shutting down slaves
    03/25/2015-13:42:51-MDT Vdbench complete
    Henk.

Maybe you are looking for