Insert into SAP table from external program

Hi Gurus,
I need to perform an insert of several records into a couple of SAP tables from an external program.
Do you know of an RFC (if it is remote enabled the better) that allows me to specify the table and records to perfom an insert?
Many thanks
Mauricio Pego

I don't know ABAP and wanted to avoid writing my own function if one standard exists.
My requirement stands like this, I have a few z tables that need to populate from my C# application by use of the .Net connector.
I haven't found a BAPI or RFC that allows me to add records to any table, but I don't know all the RFCs.
May be one of you passed throu this already.
Mauricio

Similar Messages

Access SAP Tables from Java Program

Hi All,
We have a requirement to integrate attendance portal(which is done in java) with SAP.
Our problem is how to access SAP tables from a Java program?
Database is Sybase.
Please suggest us a good solution.
Thanks in advance...

Did you go through Sap Help?
Calling BAPIs from Java - BAPI User Guide CA-BFA) - SAP Library
Regards,
Philip.

Insertion into local table from remote table with contains clause

Hi all,
We are tasked to insert some rows into our database from another database. We tried to use DBLinks to link the 2 databases and were able to use Select statements to filter out the data that we need to insert into our database.
These statements take the form of: Select * from RemoteTable where contains@RemoteLink(IndexColumn, 'car')>0;
where RemoteLink is the DBLink that we have created.
However Oracle gave us an error (ORA-00949: illegal reference to remote table) when we tried to insert the dataset from the above statement into our local table. We used the following statement in doing so: Insert Into LocalTable (Select * from RemoteTable where contains@RemoteLink(IndexColumn, 'car')>0);
Even if we use Create Table, Oracle gave us the same error when we tried to push the data from the Select Statement into the new table.
Could anyone advise us whether it is possible to insert such data into a local table? And if som what is the proper way of doing it?
Many thanks to any advises.

Hi,
there is document 261741.1 on Metalink. This states explicitly that it is not possible to invoke remote user-defined operators, and contains is such. The solution given in the article is to create a wrapper function on the remote site and this one calling in stead of contains.
Herald ten Dam
htendam.wordpress.com

Insert into other table from form

Hi All,
I have created a data block with view as a data source. I need to save the data from a form to some other table.
I have tried using INSTEAD OF Trigger. howeverwhen I try to save, getting an error : ORA-01445 cannot select ROWID from a join view without a key-preserved table.
I appreciate any suggestions on it.
Thanks and Regards
Sai

Sorry, it looked at first as if you wanted help on the problem you encountered. After reading again your response to Zaibiman I see that you were just tricking us with the detailed explanation of the error.
To insert into a table other than the one you queried, use the on-insert trigger.
However, an Instead Of trigger on the view is usually the best method. If you have set the key mode, defined a primary key item and removed any references to rowid, as per Zaibiman, then it should work. You'll need your own locking method if the view uses Group By or Distinct.

How to insert into a table from 3 tables?

Hello,
How to insert into a table getting values from 3 different tables?
For example table_A has col_1 to col_10.
I want to insert into table_A,
values: col_1 to col_4 are from table_B,
col_5 is from table_C,
col_6 to col_10 are from table_D.
Thanks!

Normally, you'd do this by joining B, C, and D together. In the simplest case, something like
INSERT INTO A( col1, ... col10 )
SELECT B.col1, ..., B.col4,
         C.col5,
         D.col6, ..., D.col10
    FROM B,
         C,
         D,
   WHERE B.someKeyColumn = C.someKeyColumn
     AND C.anotherKeyColumn = D.anotherKeyColumnYou'd have to know how the data in B, C, and D relate to fill in the WHERE clause. This basically tells Oracle how to match the data in a particular row in B with the data in a particular row in C with the data in a particular row in D.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to insert into 2 tables from the same page (with one button link)

Hi,
I have the following 2 tables....
Employees
emp_id number not null
name varchar2(30) not null
email varchar2(50)
hire_date date
dept_id number
PK = emp_id
FK = dept_id
Notes
note_id number not null
added_on date not null
added_by varchar2(30) not null
note varchar2(4000)
emp_id number not null
PK = note_id
FK = emp_id
I want to do an insert into both tables via the application and also via the same page (with one button link). I have made a form to add an employee with an add button - adding an employee is no problem.
Now, on the same page, I have added a html text area in another region, where the user can write a note. But how do I get the note to insert into the Notes table when the user clicks the add button?
In other words, when the user clicks 'add', the employee information should be inserted into the Employees table and the note should be inserted into the Notes table.
How do I go about doing this?
Thanks.

Hi,
These are my After Submit Processes...
After Submit
30     Process Row of NOTES     Automatic Row Processing (DML)     Unconditional
30     Process Row of EMPLOYEES     Automatic Row Processing (DML)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
40     reset page     Clear Cache for all Items on Pages (PageID,PageID,PageID)     Unconditional
50     Insert into Tables     PL/SQL anonymous block     Conditional
My pl/sql code is the same as posted earlier.
Upon inserting data into the forms and clicking the add button, I get this error...
ORA-06550: line 1, column 102: PL/SQL: ORA-00904: "NOTES": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table EMPLOYEES.
Is there something wrong with the pl/sql code or is it something else?

Record not inserting into sap table with connector framework ?

here is the code, but record not being inserting into the table ... but same piece of code working fine while updating ... the record ...
try {
interaction = connection.createInteractionEx();
IInteractionSpec interactionSpec = interaction.getInteractionSpec();
String functionName = "Z_XYZ";
interactionSpec.setPropertyValue("Name", functionName);
String writingTable = "MYTABLE";
RecordFactory rf = interaction.getRecordFactory();
MappedRecord importParams = rf.createMappedRecord("input");
importParams.put("ATTR1", "VALUE1");
importParams.put("ATTR2", "VALUE2");
IFunction function = connection.getFunctionsMetaData().getFunction(functionName);
IStructureFactory sf = interaction.retrieveStructureFactory();
IRecordSet table = (IRecordSet) sf.getStructure(function.getParameter(writingTable).getStructure());
table.insertRow();
table.setString("ATNAME", "VALUE");
table.setString("ATWRT", "VALUE");
importParams.put(writingTable, table);
MappedRecord output = (MappedRecord) interaction.execute(interactionSpec, importParams);
} catch (Exception e) {
any idea?
than ks
MMK

Hi Mohan,
Does a creation through SE37 with the same input work?
Yoav.

Data extraction into sap table from legacy oracle database

Hello All,
    I have a scenario where I have two different software systems (SAP and xyz systems), where a intermediate table will be created in between the two systems that is shared. Data will be updated by the xyz systems into this shared table. Now, my questions regarding this shared table.
   1) Can we write some program or something to get the data from shared table to update the SAP?
   2) If possible send me the suggestions
   3) Please also send me the sample code to get the data from the shared table
Thanks in advance,
SDN powered

this shared table should be compatiable to sap fields...write code to fetch data from this table and assign data to appropriate fields in SAP and insert the data into sap.
1. Push mechanism
Write a RFC on SAP side to insert entries into the table.
Call the RFC from xyz application passing the data you want to insert.
2. Pull mechanism
Write a ABAP Program, where you can somehow read the data of the xyz application and insert data into the table.
3. Flat file
Dump the data from xyz application into the file.
Write a ABAP program to read the file and update the table.

Bulk Insert into a Table from CSV file

I have a CSV file with 1000 records and i have to insert those records into a table.
I tried for Bulk Insert command and Load data infile command but it throws error.
Am using Oracle 10g Express Edition.
I want to achieve it thru query command and not by plsql procedures
Please send me query syntax for this problem. . . .
Thanks in Advance,
Hariharan ST.

Hi
If you create an external table that points to your csv file you will then be able populate your table from a query.
See: http://www.astral-consultancy.co.uk/cgi-bin/hunbug/doco.cgi?11210
Hope this helps

Bulk Load into SAP system from external application

Hi,
Is there a way to perform a bulk load of data into a SAP system from an external application?
Thanks
Simon

Hello,
My external application is a C program and I think I want to use IDocs and RFC to communicate with the SAP system.
Simon

Apex Application inserting into two tables from two regions in a page

Hey Guys,
Fairly new to apex like two days. So please bare with me. I am using apex 4.0.2.00.07.
I have a page with two regions. The first region has only one row and I have no problems accessing it and inserting those values into the table this is what I used to access one column from that one row APEX_APPLICATION.G_F03(1)
The second region is an interactive report, to which I have managed to add a checkbox and a textbox.
1)So if a checkbox has been checked off the row should be inserted
2) if the textbox has been entered it should replaceone of the values.
My question is how to access the second region? I started a loop based on the rows in the collection but that is as far as I got.
FOR idx IN 1..l_collectionTable_name
loop
end loop
Any help would be greatly appreciated?
Thank you
Edited by: Aj05 on Aug 2, 2012 2:10 PM

Hi Phil I used the following code
<cfquery name="qArrivalDates" datasource="rayannesql">
SET NOCOUNT ON
INSERT INTO booking (book_made, book_checkin_date,
book_checkout_date, book_adults, book_children)
VALUES('#FORM.book_made#','#FORM.book_checkin_date#','#FORM.book_checkout_date#','#FORM.bo ok_adults#','#FORM.book_children#')
SELECT SCOPE_IDENTITY() AS theNewId;
SET NOCOUNT OFF
</cfquery>
<cfquery name="qArrivalDates" datasource="rayannesql">
INSERT INTO Customer( firstname, lastname, address, address2,
city, state, postalcode, country, phone, mobile, email, notes)
Values (#qArrivalDates.theNewId# '#FORM.firstname#',
'#FORM.lastname#', '#FORM.address#', '#FORM.address2#',
'#FORM.city#', '#FORM.state#', '#FORM.postalcode#',
'#FORM.country#', '#FORM.phone#', '#FORM.mobile#', '#FORM.email#',
'#FORM.notes#' )
</cfquery>
When I tried to complete the form, I got the following error
Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][SQL Native Client][SQL Server]Incorrect syntax
near 'Fred'.
The error occurred in
C:\Inetpub\wwwroot\rayanne\customerinsertsql.cfm: line 16
14 : <cfquery name="qArrivalDates"
datasource="rayannesql">
15 : INSERT INTO Customer( firstname, lastname, address,
address2, city, state, postalcode, country, phone, mobile, email,
notes)
16 : Values (#qArrivalDates.theNewId# '#FORM.firstname#',
'#FORM.lastname#', '#FORM.address#', '#FORM.address2#',
'#FORM.city#', '#FORM.state#', '#FORM.postalcode#',
'#FORM.country#', '#FORM.phone#', '#FORM.mobile#', '#FORM.email#',
'#FORM.notes#' )
17 : </cfquery>

INSERTING INTO A TABLE FROM ANOTHER TABLE

Hi,
I am having a table called emp in which 5 columns are there, I want to insert some rows from another table called employees, only into three columns of emp table through a sub query.
Is this scenario is possible, I tried so many queries but it is not working out.
Can any body help me out.
The columns in emp table is
empno, ename, doj, designation, salary, deptno, mgrid
The columns in employees table is
empno, name, hiredate, post, salary, commission, deptno, mgr
I want to insert into empno, ename, doj, designation columns of emp table from the employees table empno, name, hiredate, post columns.
Ramesh.

It looks like your EMP table has 7 columns, not 5, and you want to insert into 4 columns, not 3.
insert into emp
(empno, ename, doj, designation)
select empno, name, hiredate, post
from employees;

Help! about insert into one table from two tables'data?

hi,all friends!
i have a question:
i have two table as like this:
table_one(id,ipaddr,col1,col2) primary key(id,ipaddr)
table_two(id,ipaddr,col1,col3,col4) primary key(id,ipaddr)
about table_one and table_two,it's columns may change execept id and ipaddr,
how can i insert the data of table_one and table_two into table_three,the columns of table_three may change with the columns of table_one and table_two
table_three may dynamic create,but it's primary key is (id,ipaddr)
thanks!
pls help!
any suggestion welcome!

insert into table_3
(id, ipaddr, col1, col2, col3, col4)
select t1.id, t1.ipaddr, t1.col1, t1.col2, t2.col3, t2.col4
from table_1 t1, table_2 t2
where t2.id = t1.id
and t2.ipaddr = t1.ipaddr;

How to insert into xml table from relational table

I wrote a sqlstaement that selects value from the relational tables. Now I want to replace root node "<event_start01>" with following value to the above selected xml string. My select returns root node and all nodes and elements of the root node.
I tried holding above sellected value into varchar2 variable but I get ora-00600 error. If I hold above selected values into xmltype variable then I am not able to replace root node with the following value.
I want to rplace rootnode with the following string.
INSERT INTO FRMD_EVENT_START01(xml_event_start) VALUES
(XMLTYPE('<event_start01
xmlns="event_start01.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="event_start01.xsd
event_start01.xsd">

Normally, you'd do this by joining B, C, and D together. In the simplest case, something like
INSERT INTO A( col1, ... col10 )
SELECT B.col1, ..., B.col4,
         C.col5,
         D.col6, ..., D.col10
    FROM B,
         C,
         D,
   WHERE B.someKeyColumn = C.someKeyColumn
     AND C.anotherKeyColumn = D.anotherKeyColumnYou'd have to know how the data in B, C, and D relate to fill in the WHERE clause. This basically tells Oracle how to match the data in a particular row in B with the data in a particular row in C with the data in a particular row in D.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to access a table of SAP standard SAP method from external program

Hi Friends,
I have to access a table and modified it defined in a standard SAP method (PROCESS_INPUT_FILTER) of class (CL_HANDLE_MM).
As we normaly do it in case of Standard program
for example: ('(SAPLMEPO)ett[]') here we are accessing internal table ett defined in SAPLMEPO.
so how we can do the same thing if some thing defined in standard SAP method.
Pl. help.

Thanks for the info guys, it will come in handy.
I need to validate that a number is entered with zero or one decimal place, then make sure it is evenly
divisible by .5 in order to test for whole or half numbers only. If not, I use an alert to
display a message when the user leaves the field.
If there is a better way to achieve this, I am all ears!
Thank you for your time,
Gary

Insert into SAP table from external program

Similar Messages

Maybe you are looking for