Bullet point colour

Hi,
Is there a way to change the default colour for bullet points in Pages? Since changing the font colour of a bullet point list to red, and with text after the list being black, every subsequent bullet point list I try to make has red bullet points with black text and I then have to change the bullet point colour from red to black manually via the inspector. Is there a way to stop it from defaulting to red bullet points?
Thanks for any help,
Andy

Hi Andy,
Welcome to the discussions. If you haven't already done so, get the User Guide, available for download from the Help menu, and read-up on Styles. Your particular formatting preferences can be saved as styles, and those made available for future work by saving your document as a Template.
Jerry

Similar Messages

Copy/paste in a Word document loses its format (bullet points, coloured tex, etc) when Firefox is open. When I close Firefox it is fine again. I am not talking about copying and pasting text between MS Word and Firefox. It is within MS Word itself.

Firefox 11.0
MS Word 2003 Basic Edition SP3

Disabling the the Skype Click to Call extension fixed the problem.
Many thanks !!!!!!

Bullet point alignment problem

Hi I am having a problem with the alignment when I use bullet points?
the body of the text is aligned so it does not exceed the screen width. But once I enter bullet points it exceeds the right hand side alignment. How do I make the alignment remain the same?
i.e.
blah blah blah blah blah blah
blah blah blah blah blah blah
blah blah blah blah blah blah
blah blah blah blah blah blah
blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah
blah blah blah blah blah blah blah blah blah blah blah blah Blah
blah blah blah blah blah blah blah blah blah blah blah blah
blah blah blah blah blah blah
blah blah blah blah blah blah
blah blah blah blah blah blah
blah blah blah blah blah blah
I have written codes as
 
</div>
<div id="content">
 

What is BioprimeTM – and why do you need it? 
BioprimeTM is a simple, inexpensive soil conditioner which allows farmers to change the nature of soil biology. It is a way to weed out the bad bugs and give the good bugs a boost. The outcome is better soil health, better plant production and better root disease management.
 
BioprimeTM
<ul>
 <li>is made in Perth. </li>
 <li>is backed by trial data from work done in WA.</li>
 <li>does not cost a fortune (per liter and per hectare it is probably the cheapest input you will use this season).</li>
 <li>does not require a leap of faith to use, nor any rocket science to understand what it is and why it works.</li>
</ul>
BioprimeTM was originally developed about 15 years ago for vegetable producers as a way to control root disease. In those days you couldn’t actually prove what was going on, but growers kept buying it because it did what it was intended to do – it stopped root disease. 

Below is the complete page code including a doctype, the <head> and <body> tags.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<link href="../CSS/Bio_CSS.css" rel="stylesheet" type="text/css" media="all" />
<script src="../Scripts/swfobject_modified.js" type="text/javascript"></script>
<title>Welomce to Bioscience</title>
<style type="text/css">
body {height:100%;
max-height:100%;
overflow:hidden;
padding:0;
margin:0;
border:0;
#content {
overflow:auto;
position:absolute;
z-index:3;
top:150px;
bottom:20px;
left:270px;
right:0;
background-color: #FFFFCC;
color: #000;
font-size:14px;
* html #content {
top:0;
left:0;
right:0;
bottom:0;
height:100%;
max-height:100%;
width:100%;
overflow:auto;
position:absolute;
z-index:3;
border-top:150px solid #fff;
border-bottom:25px solid #fff;
border-left:270px solid #fff;
font-family: Verdana, Geneva, sans-serif;
font-size: 14px;
font-style: normal;
line-height: 25px;
#head {
position:absolute;
margin:0;
top:-2px;
left:-2px;
display:block;
width:100%;
height:150px;
background-position:0 0;
background-repeat:no-repeat;
font-size:4em;
z-index:5;
overflow:hidden;
color:#000;
background-color: #9acc99;
#foot {
position:absolute;
margin:0;
bottom:-3px;
left:2px;
display:block;
width:100%;
height:25px;
font-size:1em;
z-index:5;
overflow:hidden;
color:#fff;
background-color: #66CC99;
text-align: center;
font-family: Verdana, Geneva, sans-serif;
visibility: visible;
#content p {
color: #000;
text-align:justify;
line-height:1.5;
font-family:Verdana, Geneva, sans-serif;
font-size:1em;
padding-top: 0px;
padding-right:40px;
padding-bottom:0px;
padding-left:40px;
width:950px;
#content h1 {
color: #663300;
padding: 0px;
text-indent: 30px;
#content h2 {
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
color: #000;
text-indent: 30px;
#content h3 {
font-family: Verdana, Geneva, sans-serif;
font-size: 14px;
color: #000;
text-indent: 50px;
* html #left {
position:absolute;
left:0;
top:150px;
bottom:25px;
width:270px;
height: 100%;
#left {
position:absolute;
left:0px;
top:149px;
bottom:20px;
width:270px;
font-size:1em;
z-index:4;
overflow:auto;
background-repeat:no-repeat;
background-color: #9acc99;
color: #663300;
text-align: left;
vertical-align: middle;
background-image: url(../Assets/Side_Background7.jpg);
font-family: Andalus, "Palatino Linotype", "Times New Roman";
#left h2 {
text-indent: 15px;
#left h3 {
text-indent: 30px;
#left ul{
margin:0;
padding:0;
list-style:none;
#left a {
colour#663300;
#left li a:link,#left li a:visited{
padding:0 0;
display:block;
text-decoration:none;
font:Andalus, Georgia, "Times New Roman";
color:#FFFFFF;
#left li a:hover {
background:#306726;
color:#FFF;
#left li a.current,#left li a.current:hover,#left li a.current:active {
color:#663300;
background:#ffffcc;
cursor:default;
* html #left li a.current,#left li a.current:hover,#left li a.current:active,#left li a.current:visited {
color:#663300;
background:#ffffcc;
cursor:default;
#content ul {
margin: 0;
padding: 0 0 12px 55px;
#content li {
margin: 0 0 5px 0;
padding: 0;
font-family: Verdana, Geneva, sans-serif;
font-size: 14px;
</style>
</head>
<body>
<div id="head"><img src="../Assets/BioLogo.jpg" width="300" height="150" align="left">
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="980" height="150" id="FlashID">
 <param name="movie" value="../Assets/Bio_980x150_Banner.swf">
 <param name="quality" value="high">
 <param name="wmode" value="opaque">
 <param name="swfversion" value="6.0.65.0">
 
 <param name="expressinstall" value="../Scripts/expressInstall.swf">
 
 
 <object data="../Assets/Bio_980x150_Banner.swf" type="application/x-shockwave-flash" width="980" height="150">
 
 <param name="quality" value="high">
 <param name="wmode" value="opaque">
 <param name="swfversion" value="6.0.65.0">
 <param name="expressinstall" value="../Scripts/expressInstall.swf">
 
 <div>
 <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
 <a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.g if" alt="Get Adobe Flash player" width="112" height="33" /></a>
 </div>
 
 </object>
 
</object>
</div>
<div id="foot">©2010 Bioscience Pty Ltd, 488 Nicholson Road Forrestdale, WA, 6112, Ph: (08) 9397 2446, Fax: (08) 9397 2447, Email: <a href="mailto:[email protected] ">[email protected] </a></div>
<div id="left">
<ul>
<li>
<h2>
<a href="../index.html">Home</a>
<a href="../Enviro/enviro_acid.html">Environmental</a>
<a href="../Water/water.html">Water</a>
<a href="soil.html" class="current">Soil</a>
</h2>
</li>
<li>
<h3>
<a href="soil_diversity.html">Soil Biodiversity</a>
<a href="soil_microbial.html">Soil Microbial Ecology</a>
<a href="soil_bioprime.html">BioprimeTM</a>
<a href="soil_orderform.html">Order Form</a>
</h3>
</li>
<li>
<h2>
<a href="../Geotech/geotech.html">Geotechnical</a>
<a href="../Horti/horti.html">Horticultural</a>
<a href="../Analyt/analyt.html">Analytical</a>
<a href="../Research/research.html">Research </a>
<a href="../Products/products.html">Products</a>
</h2>
</li>
</ul>
</div>
<div id="content">
 
What is BioprimeTM – and why do you need it? 
BioprimeTM is a simple, inexpensive soil conditioner which allows farmers to change the nature of soil biology. It is a way to weed out the bad bugs and give the good bugs a boost. The outcome is better soil health, better plant production and better root disease management. 
 BioprimeTM
<ul>
<li>is made in Perth. </li>
<li>is backed by trial data from work done in WA.</li>
<li>does not cost a fortune (per liter and per hectare it is probably the cheapest input you will use this season).</li>
<li>does not require a leap of faith to use, nor any rocket science to understand what it is and why it works.</li>
</ul>
BioprimeTM was originally developed about 15 years ago for vegetable producers as a way to control root disease. In those days you couldn’t actually prove what was going on, but growers kept buying it because it did what it was intended to do – it stopped root disease. 
In the last 10 years there have been many advances in understanding what microbes are in soil, and what they are doing. This has largely come about because of the so-called DNA revolution. By using this DNA technology, we can now see exactly what changes occur in soil microbiology when BioprimeTM is applied. 
 How is it made ? 
BioprimeTM is made by fermentation of molasses using baker’s yeast. This sounds really simple, but there are a number of factors involved to make it work. 
The amount of oxygen in the fermentation determines how much alcohol, acid or CO2 is made from the sugar in molasses. BioprimeTM is made with the amount of air carefully controlled in order to make a maximum amount of both alcohols and acids. These then condense to form esters. BioprimeTM is full of esters. 
With BioprimeTM we want lots of yeast, so nutrients are added to make the yeast grow quickly. At the end of the process we have a lot of biomass, because just like in Vegemite, yeast biomass contains a lot of protein and vitamins. 
The fermentation which makes BioprimeTM doesn’t stop completely, it slows down as it becomes pickled in its own acids. We then arrest the process by bursting the yeast cells, making a stable, long-life product. 
 How does it work ? 
Looking at soil microbiology using DNA shows it is very complex. There are tens of thousands of different species in each gram of soil. There is no point in looking at any single species, for they all seem to come and go with changing seasons and conditions. 
Instead we look at the major groups and the diversity within each group. We look at 5 major groups:
<ul>
<li>Proteobacteria: These are simple, fast growing bacteria (formerly called gram negatives), can dominate anaerobic (no oxygen) environments, live off simple organic matter – they generally don’t do your soil much good.</li>
<li>Fermicutes: More complex, also fast growing (formerly called gram positives), some are important pathogens, can be anaerobic or aerobic, also don’t do soil much good.</li>
<li>Archea: These are tough and ancient life forms, slow growing, but live in extreme environments (hot, salty, acidic etc). Their importance in soil was only realised with DNA methods. They build up to significant numbers in cultivated soil.</li>
<li>Actinobacteria: These are quite complex bacteria which are involved in soil carbon dynamics. They are slow growing but feisty, as they are the chemical warfare specialists in soil. (Most of the antibiotics and drugs we use come from this group). When there are plenty present, root pathogens are suppressed.</li>
<li>Fungi: These are more complex than bacteria, and fall into two groups, the lower fungi are mainly moulds, and the higher fungi, the Dikarya are the mushrooms and the mycorrhyza.</li>
</ul>
The more diverse a soil’s microbial population, the healthier it is. All the above five groups should be present, but because the Actinobacteria and Fungi are beneficial to plant growth, high diversity in these groups is particularly important. 
When BioprimeTM is added to soil, the Actinobacteria and Dikarya get a boost because they get a dose of vitamins. The proteobacteria get suppressed, firstly because the way they communicate with each other, a process called quorum sensing, is interrupted. Secondly, they can’t grow s easily on the complex esters, but higher bacteria and fungi can. 
When we look at the way group diversity changes, we see short term and longer term impacts. In the short term, anaerobic bacteria are quickly suppressed. Then we see Dikarya and Actinobacteria start to build up numbers. 
These changes mean the best time to use BioprimeTM is when you sow your crop, then again once it is established – at the two to four leaf stage. 
In moist soil, grains take a few days to imbibe water and start to germinate. During this time, the presence of proteobacteria can be harmful, as they can feed on the exudates produced by a germinating seed and make a local anaerobic zone in wet soil, slowing down emergence. On the other hand, you want Dikarya active, for within this group are the mycorrhyzal fungi which colonize roots and help plant phosphorous uptake. There is plenty of competition in soil, so the quicker they can colonise the root, the more likely they will persist. 
There are a number of important pathogenic organisms which lurk in soil, and they often go unnoticed until stress hits the plant. An important control against pathogens is the Actinobacteria which feed on the pathogens. They also antagonise the simple bacteria which mineralise nitrogen. 
So BioprimeTM does quite a lot of things, all of which are good for the ability of soil to support healthy plant growth. 
 How much to use ? 
The optimal application rate depends on two important factors, pH and soil organic matter. 
BioprimeTM works best at a soil pH of 7 – and this is the point of optimal plant nutrient availability. We always advise to lime soil to get it to pH 7 – because we now we realise this is also the point of maximum microbial diversity. 
At a pH of 7, you only need to apply 3 liters per hectare at each application to get a maximal response. If the pH is lower, you get a better response by applying more – 5 liters per hectare at pH 4.5 – 5.5, and 4 liters per hectare at pH 5.5 – 6.5. 
The amount of organic matter in soil also influences the best application rate, but in a complex way. At low soil organic matter (under 0.5% organic carbon), a low rate works well (but adjusted for pH). If your soil carbon is between 0.5 – 1.5%, it takes a bit more for maximal impact because there is more background microbes living off that carbon, so you apply about 50% more. But if your soil carbon is very good (say 1.5 – 2.5%), you can drop the rate back again. If organic carbon is above 2.5% - you are blessed, and you soil is likely to already be very healthy and it is unlikely BioprimeTM will give you a further benefit. The following table summarises the best application rate.

<table border="4" cellpadding="2" cellspacing="2" width="50%">
<tr>
<td>Application Rates</td>
<td colspan="3">Organic Carbon </td>
</tr>
<tr>
<td>pH Range</td>
<td>0 - 0.5%</td>
<td>0.5 - 1.5%</td>
<td>1.5 - 2.5%</td>
</tr>
<tr>
<td>4.5 - 5.5</td>
<td>5 L/ha</td>
<td>7.5 L/ha</td>
<td>5 L/ha</td>
</tr>
<tr>
<td>5.5 - 6.5</td>
<td>4 L/ha</td>
<td>6 L/ha</td>
<td>4 L/ha</td>
</tr>
<tr>
<td>6.5 - 7.5</td>
<td>3 L/ha</td>
<td>4.5 L/ha</td>
<td>3 L/ha</td>
</tr>
</table>

How to apply BioprimeTM 
If you have a liquid system on your drill rig, it is best to apply BioprimeTM as a spray into the drill row after the press wheel. Simply dilute the volume you need in sufficient water to get even spread. 
Application with a boom spray just before seeding is an acceptable alternative. Again, simply dilute BioprimeTM with water to get even spread. 
Once your crop is up and established, the second application can be with a boom spray. BioprimeTM is acidic and completely water soluble, so it is compatible with most chemicals (but check first with a jar test). 
 Bad Start ? 
Sometimes the seasons are unkind – sow dry and no rain comes, or too much rain comes and paddocks waterlog. BioprimeTM opens an opportunity window for about 3 weeks. If you dry sow and it hasn’t rained in the first three weeks, it is probably worth another application once it rains. Likewise if things get too wet and the crop starts to get stressed and yellow, another application of BioprimeTM will help it get back on its feet. 
 Seeing BioprimeTM at work 
We always encourage you to sow a bit of your crop without BioprimeTM so you can see it at work. You should see earlier emergence, and once the crop is established, compare the root structure between treated and untreated areas. If you believe root structure is important, you will be impressed. 
If you want to get into detail, Bioscience provides an assay of soil microbial diversity which is a world first. Send us a 50 g sample of soil (sampled properly from the top 150 mm, and put into a refrigerator and send it to us on ice). We extract the DNA, then measure how many types of microbes are present in significant numbers in each of the 5 major groups. From this we can derive a biodiversity index and a health index. If you are interested in soil biology and soil health, this leading-edge assay can show you how your soil changes from year to year, guiding you with information on what treatments work and what doesn’t. 
 Is there anything else like BioprimeTM ? 
There are a number of products which come and go which make claims about improving soil health. They never come with a technical description of what they are, and they never come with field trial data. Usually there are lots of testimonials from someone in Utah or New Delhi, and there are pictures of a guy holding big onions in one hand and small onions in the other. 
We take notice when farmers start talking positively about getting a good response from a product, so we go out and buy some and pull it apart in our lab. There are only two we have found which are somewhat similar. TM21, made by Best in Canada is fermented molasses, but it is lot thinner, and poorly stabilised – smells a bit putrid compared to BioprimeTM . Vitazyme is made in the USA, but it is fermented corn syrup rather than molasses, but for some odd reason they add vitamin D to it (even though there is no known function for Vitamin D in anything other than higher vertebrates! 
But the huge difference is the price. 
 What does BioprimeTM Cost and How Do I Get It ? 
Getting BioprimeTM is easy. You buy it online direct from the manufacturer. It is only sold in 1000L IBC’s for $2 per liter (FOB). 
If you have your own IBC’s, drop them off and we will fill them up. If you don’t, you will have to pay $150 for a serviceable second hand one.
 
 
</div>
<script type="text/javascript">

</script>
</body>
</html>

How can I use bullet points on the ipad keyboard?

When writing Notes, on my iPhone, there is a key for bullet points on the keyboard. This doesn't seem to exist on the iPad3 keyboard and just wondered if there is any other way to use bullet points on iPad. They are both set to the English UK keyboard.
Thanks.

There are many other keyboard keys that are hidden under the standard virtual keyboard keys. They will vary from keyboard to keyboard based on your language settings but this article will point you in the right direction.
http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-special-characters.php

Unordered list not showing up as indented bullet points within Accordian

http://www.foundationforyoutharts.org/test/Programs.html
I have a page using the spry accordian, and about five different catagories of information. Some of the copy is in unordered lists (in martial arts catagories), but it shows up as as regular text. Any ideas on how to make it view as a typical unordered list with bullet points and indented?
Thanks for taking time to look at this.

Add a margin-left of 20px to your ul.
Either added it in your stylesheet. or directly on the element:
<ul style="margin-left:20px">

Use mask to show one bullet point at a time

I have content in multiple bullet points of text. The background is a texture. I'd like to use mask to show the text in sync with audio. It works but the text is the color of the mask. I have bullet point itself in a different color. How can I mask the area to show and use its own color?
Or is there a better way to sync multiple bullet points of text without having each bullet points in its own layer and MC?
Thanks,

make sure your font is embedded.

Bullet Points & Attachment Preview

Just switched from Entourage to Mail in anticipation syncing w/ a new iPhone. However, when composing emails I can't figure out how to create a bullet point list in the body of the message.
Also, is there a way to configure your inbox to preview attachments (e.g. as in Entourage)?

I put this together very rapidly:
No Table involved. It's grouped text and squares. - Fabe

Lightroom wants to me to install 5.6, but the download link takes me to a page with plain text bullet points, none of which are the update link. Can anyone give a direct lnik?

Lightroom wants to me to install 5.6, but the download link takes me to a page with plain text bullet points, none of which are the update link. Can anyone give a direct lnik?

Google "lightroom 5.6" and direct links to both Mac and Windows will be at the top.

How to copy the bullet point format/style from MS Word to Pages?

Hi everyone,
I'm trying to make the swap from Mac Word to Pages but the one thing that frustrates me so much to the point of not using Pages is the bullet point system.
In Word the set spacings are exactly how I want them - whereas in Pages, everything is tighter - there is less space between the margin and the point, the point and the text etc.
I've painstakingly inserted all the spacings from Word into Pages and saved it as a "style" but it just reverts back to the default positioning when I open up a new document and select my saved style.
Any ideas / a magic tool to just copy the style from Word? It's such a shame because Pages is a much slicker programme than Word and I really want to use it but as a student, bullet points are my world.
Thanks,
James

Hi Peter, thanks for your reply.
Yeah I get the font and formatting for the text copied no problem when copying but I'm talking about from scratch in a new document, I insert a bullet point and even when selecting my saved style, it just reverts back to the default.
I agree, massive pain. It is the only thing stopping me from making the full switch now iCloud Drive is getting close to Dropbox.
Am I a misguided fool for thinking there's a patch or modification of some description that can copy the default bullet spacings from Word and create a new style following them in Pages?
Thanks, James

Undesired bullet pointed text automatically upon creating a new text box

Hi there! Due to the snow I'm working from home today but I have a little problem back in work that would be nice to get some help on before i go back hopefully tomorrow so i can continue at full speed!
I'm using Mac OS X (can't remember which version from the top of my head but something quite new!), and InDesign CS3. Basically, every time i create a new text box, or place an excel file into the document (having to do a lot of that at the moment, creating a price guide), it is in bullet point form, and although it's quite easy to go and turn it back off, with me having to do this quite a lot it's getting somewhat frustrating. It does it every single time i create a new text box even if i have turned it off for the previous one
I'm pretty sure this is going to be one of those "oh, you just need to..." problems with a really simple answer...i hope so anyway!
Cheers dears!
Linz

Thanks guys, i now seem to have a related problem at home. Here i am using CS2 but working on the same document as at work. I have made sure nothing is selected and set my character and paragraph styles to basic, and hey presto, when i create a text box, all is well. However, when i create a table, and i type in a cell, the bullets return! I have just discovered that turning them off in CS2 doesn't seem to be as simple as CS3 - so firstly - how do i do that?! And secondly - any ideas why it is happening but only in tables?!

Bullet points in Word for Mac

When I have a bullet point list in Word, after pressing enter the next bullet point won't show up until I start typing. Is there anyway to change it so the bullet appears as soon as I press enter?

You should probably be posting on Microsoft's Mac forums since its their software you're having issues with:
http://answers.microsoft.com/en-us/mac

Installed Yosemite and my power point bullet fonts have gone weird. How can I revert back to original bullet point menus

Since installing Yosemite the font menu on my bullet points has changed to strange symbols. I am using Office for mac 2011

so what are you moaning to us about? you want an older JRE, go install it. I don't know why you're taking this as some personal insult or something, it's not like anyone here is either responsible for this or can do anything about it.
Your little playground fight with MS concerns me not in the least.what playground fight? by and large, everyone here is a programmer who uses the java programming language in a professional capacity. that's got absolutely nothing whatsoever to do with the JRE arguments of a few years ago. get your facts straight

Power point bullet point numbering

Hi,
I have just converted a PowerPoint presentation to a captivate course, entering questions etc. throughout.
3 or 4 of the slides have numbered bullet points, and 2 of those slides the number sequence wasn't kept. it just lists each point as 1. (there are six 1.'s rather than 1-6).
In the PowerPoint slide the numbering is 1-6, in the working captivate file (captivate 7) it is 1-6, and in the edit in PowerPoint screen it is 1-6.
In the preview or published versions it is there are 6 bullets all numbered 1.
Any thoughts?

You cant change the bullet timing easily (at least not in a
straight forward way)
after importing in Captivate. However those timings already
present in power point slides are honored by Captivate. You need to
ensure you do the following in the powerpoint animations so that it
appears automatically:
1. Go to Timing tab
2. Change the Start to "After previous"
3. Delay to (say 5 sec)
If you are still not able to do, please send me the sample
ppt file (or some slides) : [email protected]

My muse website, when uploaded, jumbles quotation marks, bullet points and apostrophes to appear as â€¢ and â€? Why?

My muse website jumbles quotation marks, bullet points and apostrophes to appear as â€™.
Its fine when I preview in browser, only once it's been uploaded do the marks become jumbled. Why?

Thanks Zak..The server host said that the jumbled marks are appearing as binary code while the rest of the text is appearing as "text".
They believe that the problem may be occurring at the FTP. The server host is configured to host binary and unicode.
They advised me to upload a zipped folder containing the site and they will try and open it at their end. Also, not sure if this is unique
to Adobe font kits. Its from Adobe Font kit.

How do i add bullet points to a pdf

How do i add bullet points to a pdf?

Hi
I am not using it for a presentation. I am creating an email flyer and just want to highlight a few key points by adding bullet points such as:
xxx
xxx
I eventually changed the font to wingdings which was very time consuming.

Bullet point colour

Similar Messages

Maybe you are looking for