Bumblebee complains that nouveau does not exist (using nvidia)?

I'm trying to get bumblebee working with the nvidia driver.  Nouveau is not installed and the driver is set to "nvidia" in /etc/bumblebee/bumblebee.conf.  For some reason I'm getting the following error:
[ 1435.391816] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
Here is the full output of optirun -vv glxgears --info :
[ 506.838977] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 506.839573] [INFO]Configured driver: nvidia
[ 506.839939] [DEBUG]optirun version 3.2 starting...
[ 506.840004] [DEBUG]Active configuration:
[ 506.840025] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 506.840045] [DEBUG] X display: :8
[ 506.840064] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 506.840082] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 506.840101] [DEBUG] Accel/display bridge: auto
[ 506.840120] [DEBUG] VGL Compression: proxy
[ 506.840132] [DEBUG] VGLrun extra options:
[ 506.840143] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 506.840175] [DEBUG]Using auto-detected bridge primus
[ 507.012729] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 507.012746] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 507.012752] [DEBUG]Socket closed.
[ 507.012767] [ERROR]Aborting because fallback start is disabled.
[ 507.012773] [DEBUG]Killing all remaining processes.
/etc/bumblebee/bumblebee.conf looks like this:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Any ideas?
Thanks,
H.

click

Similar Messages

  • I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

    I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

    Hi vindog60,
    Thank you for using Apple Support Communities.
    To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
    Issues installing iTunes for Windows - Apple Support
    Cheers,
    Alex H.

  • Error: This application required an Xtra (ActiveX...) that either does not exist or failed

    Hi All,
    im having trouble few days now , i hope someone can give me a lead here.
    i have a director mx file written in arabic, i open it in Director 11.5, the file behave strangely, very slow publishing process, very slow access to the xtra list.
    after publishing (shockwave and html), i open the html, the preloaded start to run but i can see its not reaching 100%, after a while i get the error massage:
    "This application required an Xtra (ActiveX...) that either does not exist or failed..." and firebox or IE crashes.
    In the movie extra list (Modify menu) i can see all extras, and all have "download if needed", but in ActiveX the "download if needed" grays out. i have no idea why
    things i try with no success:
    uninstall and reinstall shockwave player
    check the same file in another machine
    exclude and include xtras in Publish Settings > Files
    add activex.x32 from other places
    Hope for good news
    Win Xp sp3
    Thanks
    Shay

    In the movie extra list (Modify menu) i can see all extras, and all have "download if needed", but in ActiveX the "download if needed" grays out. i have no idea why
    Because AX controls aren't SW-safe. You will have to redesign your file to remove the ActiveX control if you want it to run in a browser.

  • HT4623 I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?to look for the

    I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?

    This featue is only available on iphone running ios 5 or later.
    Update as you always have, via itunes.
    Read the article you linked.  the entire article, not just the first part.
    iOS: How to update your iPhone, iPad, or iPod touch

  • HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

    why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

    Hi lgmmo,
    I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
    A quick Chat session should get you fixed up.
    Please let us know if you have additional questions.
    Best,
    Sara

  • Compiler says that package does not exist...why??

    I have a directory called myutil, and inside that, a class "PrintTeste". Out of package, one class called "Teste"...
    See the code:
    public class Teste {   
        /** Creates a new instance of Teste */
        public Teste(){
            myutil.PrintTeste.mPrint();
        public static void main(String []args){
            Teste teste = new Teste();
    inside package myutil:
    package myutil;
    public class PrintTeste { 
        public static void mPrint(){
            System.out.print("teste ");
    }using javac myutil/PrintTeste.java.... it's ok
    But, when I try compile using javac Teste.java I receive the following message:
    Teste.java:8: package myutil does not exist
    myutil.PrintTeste.mPrint();
    ^
    Using Netbeans 5.5, this error does not occur.
    My environment variables CLASSPATH, JAVA_HOME AND PATH were right setted...I'm using Windows XP, jsdk 1.5.0_07
    So, what could be happening?
    Thank for yout help!
    Eliselbert

    Fortunatly, the compile process ocurres well using:
    javac -classpath . myutil/TestePrint.java
    and
    javac -classpath . Teste.java
    but when I try run the class Teste, another error:
    java Teste
    Exception in trhead "main" java.lang.NoClassDefFoundError: Teste/class

  • Facing ABAP dump in program SAPLGRAP that ABAP_2_DAT does not exist

    We have an IDES ECC6.0 installation. We are facing some ABAP dump whenever any activity which involves a list is performed.
    Eg: When in SU01 you click on user field and press F4 to get the list of present users, it shows following dump:
    ( Error in the ABAP Application Program
    The current ABAP program "SAPLWDTM" had to be terminated because it has++
    come across a statement that unfortunately cannot be executed.++
    The following syntax error occurred in program "SAPLGRAP " in include "LGRAPFGL" in
    line 1203:
    "The FORM "ABAP_2_DAT" does not exist."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "AICAMT "
    Error in the ABAP Application Program
    The current ABAP program "SAPLWDTM" had to be terminated because it has
    come across a statement that unfortunately cannot be executed. )
    The WS_DOWNLOAD module itself is missing. Any idea on this?

    Hi Uday,
    Thanks for your responce.
    The ECC6.0 system is at EHP 1 SP 14.
    SM21 log shows the following:
    Run-time error "SYNTAX_ERROR" occurred.
    The details of this error is the same as mentioned in the previous post i.e
    the FORM "ABAP_2_DAT" could not be found.
    Regards,
    Kushal Agrawal

  • I tried to open an account here to find my phone but made a mistake when I type my email, at the end I typed con instead of com so it was register just like that and now is asking me to verified the email but I can't because that email does not exist

    can I get help how to delete my apple account

    Just make a new one with the correct email.

  • How do I cancel a subscription that apparently does not exist??

    Somebody PLEASE help. I have found Adobe are charging my credit card monthly (£17.15). I raised an account and find no subscription purchases on there. So, I went through my ITunes account just in case I have inadvertently bought something (I have a "free" Adobe Reader on there). There is no subscription noted there either. It seems impossible to communicate directly with Adobe. How on Earth do I cancel something I have no knowledge of and no trace of ?? Has anybody else had this experience?

    You should try to Contact Customer Care by chat or phone.
    [topic moved to Acrobat.com Services forum]

  • DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

    Hi All,
    We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
    Can anyone advise how to solve the issue? Please find below portion of the short dumps.
    Category               ABAP Programming Error
    Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
    ABAP Program           SAPLCLVF
    Application Component  CA-CL-CL
    Date and Time          11.06.2014 12:08:28
    Short text
         A table is unknown or does not exist.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLCLVF" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         A table is referred to in an SAP Open SQL statement that either does not
          exist or is unknown to the ABAP Data Dictionary.
         The table involved is "AUSPN_V1" or another table accessed in the statement.
    Source Code Extract
    Line  SourceCde
      104     if dupl = kreuz.
      105       insert auspc_v2 client specified from table auspcv2
      106                              accepting duplicate keys.
      107     else.
      108       insert auspc_v2 client specified from table auspcv2.
      109       if syst-subrc ne 0.
      110         message a585 with tabausp.
      111       endif.
      112     endif.
      113     refresh auspcv2.
      114   endif.
      115   read table auspcv3 index 1.
      116   if syst-subrc = 0.
      117     if dupl = kreuz.
      118       insert auspc_v3 client specified from table auspcv3
      119                              accepting duplicate keys.
      120     else.
      121       insert auspc_v3 client specified from table auspcv3.
      122       if syst-subrc ne 0.
      123         message a585 with tabausp.
      124       endif.
      125     endif.
      126     refresh auspcv3.
      127   endif.
      128   read table auspnv1 index 1.
      129   if syst-subrc = 0.
      130     if dupl = kreuz.
      131       insert auspn_v1 client specified from table auspnv1
      132                              accepting duplicate keys.
      133     else.
    >>>>>       insert auspn_v1 client specified from table auspnv1.
      135       if syst-subrc ne 0.
      136         message a585 with tabausp.
      137       endif.
      138     endif.
      139     refresh auspnv1.
      140   endif.
      141   read table auspnv2 index 1.
      142   if syst-subrc = 0.
      143     if dupl = kreuz.
      144       insert auspn_v2 client specified from table auspnv2
      145                              accepting duplicate keys.
      146     else.
      147       insert auspn_v2 client specified from table auspnv2.
      148       if syst-subrc ne 0.
      149         message a585 with tabausp.
      150       endif.
      151     endif.
      152     refresh auspnv2.
      153   endif.

    Hello
    Please check on transaction SE11 if this table exists and if it is active.
    Also, it may be a database issue. What is your database?
    BR
    Caetano

  • Creating BADI for Virtual Key fig: Error: RSR_OLAP_BADI does not exist

    Hi,
    I am following some instructions to test the implementation of virtual key figure and came to the point to create the BADI.
    Intructions on page 5:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c
    SE19
    Create Implementation; New BADI; Enhancement Spot:    RSR_OLAP_BADI
    At this point I get an error that RSR_OLAP_BADI does not exist.
    I then chose at random APB_LAUNCHPAD but this works in the sense that it took me to the next screen
    1. What does it mean by RSR_OLAP_BADI not existing?
    2. I know the instructions points to choose RSR_OLAP_BADI, but why that particular program and how does one gets to know that it is the one to use for virtual key figure/char implementation?
    3. When I tested with APB_LAUNCHPAD, I did not get the same screen on page 5 of the link, is it different for BI 7? Or, am I missing a point?
    Thanks

    Hi,
    thanks for the guidance.
    Yes, I tried to implement exactly as in the article.
    Yes, I defined the filter for the Infoprovider, as ZV*
    Are you suggesting that at this point, if in the method  if_ex_rsr_olap_badi~define, I change the value of
    "ZV_ZIPER" to my DSO or Cube, I should now see the virtual key figure in my query?
    Based on this understanding, I modified the method as follows, (my cube name is 2LIS_11_VASCL):
    method IF_EX_RSR_OLAP_BADI~DEFINE.
      DATA: l_s_chanm TYPE rrke_s_chanm,
      l_kyfnm TYPE rsd_kyfnm.
      FIELD-SYMBOLS:
      <l_s_chanm> TYPE rrke_s_chanm.
    Insert Code
      CASE i_s_rkb1d-infocube.
    CASE i_s_rkb1d-2LIS_11_VASCL.
          WHEN '2LIS_11_VASCL'.
          l_s_chanm-chanm = 'ZVAR_SHPR'.
          l_s_chanm-mode = rrke_c_mode-read.
          APPEND l_s_chanm TO c_t_chanm.
          l_s_chanm-chanm = 'ZVARDT'.
          l_s_chanm-mode = rrke_c_mode-read.
          APPEND l_s_chanm TO c_t_chanm.
          APPEND 'ZV_20DV' TO c_t_kyfnm.
      ENDCASE.
    endmethod. "if_ex_rsr_olap_badi~define
    After activation, I checked the query and still I am not seeing the virtual key figure in the query for selection.
    Any more ideas?
    Thanks
    Edited by: Amanda Baah on May 24, 2009 8:01 AM

  • Requested query does not exist on the current server.

    Hi All,
    I am facing a problem in BI 7.0 related to query view.I am able to create a view on a query and can successfully save it .But when I am trying to open it using Bex Analyzer, it throws an error that query does not exist on the current server.
    Please find the steps below which I did to create a query view in BI 7.0.
    1.Executed query and then clicked on save from the tool bar.It asks me to save as workbook or save as view.I clicked on save as view and gave some name to view.It saved successfully.
    2.Now when in Bex I am trying to open the view , it gives the message 'The requested query does not exist on the current server'.
    Please help me in solving the issue.
    Regards,
    Phani.

    Hi,
    I am facing the same problem, though some others of my views can be opened.
    We had an upgrade of the system to Support Package stack 13. Maybe this caused problems.
    My BEx Analyzer Version is:
    Support Package 14, Patch 3, Revision 811
    Philipp

  • Post Goods Issue - error : Class type does not exist - Message no. VK662

    Hi,
    I am trying to do Post Goods Issue and getting this error: Class type does not exist
    When double click on the error, it shows it is a message no vk662.
    Any help to resolve it is appreciated. Thanks in advance.
    -Sri

    Sri
    There is a problem in batch determination.
    The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
    Display the batch from the delivery item  using MSC3N and go into the Classification tab. You should have a class of class type 22.  See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
    Hope this helps.

  • Accessing a sequence which does not exists

    i have pl/sql code as below and the sequence  value is displayed based on condition.In case the sequence  does not exists and condition fails  the pl/sql is not getting compiled and throws error  saying that  sequence does not exists.
    For eg:
    declare
    i number;
    begin
    if ( 1=2)  then
    select  top_seq.nextval into i from dual;
    dbms_output.put_line('i'||i);
    end if;
    end;
    in above sequence  does not exist and condition is failed as it never access sequence, does the pl/sql  code execute successfully and  which is not  happening as it throws error  . sequence does not exists.

    910111 wrote:
    Hi,
    as Frank mentioned before, you can achieve that by using dynamic sql, see following example:
    DECLARE
      lc_sql       VARCHAR2(4000);
      ln_seqExists NUMBER       := 0;
      lc_seqName   VARCHAR2(30) := 'TOP_SEQ';
      i            NUMBER;
    BEGIN
      SELECT NVL(COUNT(*),0)
      INTO ln_seqExists
      FROM user_sequences
      WHERE sequence_name = lc_seqName;
      IF ln_seqExists     = 0 THEN
        lc_sql           := 'CREATE SEQUENCE ' || lc_seqName;
        EXECUTE immediate lc_sql;
      END IF;
      IF ( 1    = 1) THEN
        lc_sql := 'select  top_seq.nextval from dual';
        EXECUTE immediate lc_sql INTO i;
        dbms_output.put_line('i: ' || i);
      END IF;
    EXCEPTION
    WHEN OTHERS THEN
      dbms_output.put_line(sqlerrm);
    END;
    Regards
    Not everything that can be done should be done .... 
    Before showing someone how to shoot themselves in the foot, it would be best to determine that shooting themselves in the foot is the best and most appropriate course of action.

  • SE16N does not exist!

    Hi dear all,
    I recently installed NetWeaver 7.0 on a solaris OS ABAP+JAVA.
    And I created a client (200 id).
    And after logging into 200 when i execute t-code se16n, it says that se16n does not exist.
    Can you tell me why is that and how to fix the problem please.
    Further more some tables are missing as well.
    Like mara vbap ...
    Any help would be greatly appreciated.
    Thanks in advance,
    Thilanka.

    Hello!
    I am using ECC 6 with the following patch level. I am able to work on SE16n including with IDES, ECC6 and NW2004s.
    SAP_ABA     700     0005     SAPKA70005     Cross-Application Component
    SAP_BASIS     700     0005     SAPKB70005     SAP Basis Component
    ST-PI     2005_1_700     0001     SAPKITLQI1     SAP Solution Tools Plug-In
    PI_BASIS     2005_1_700     0005     SAPKIPYJ75     PI_BASIS 2005_1_700
    SAP_BW     700     0005     SAPKW70005     SAP NetWeaver BI 7.0
    SAP_AP     700     0002     SAPKNA7002     SAP Application Platform
    LCAPPS     2005_700     0001     SAPKIBHD01     LC Applications (LCAPPS) 2005_700
    SAP_APPL     600     0002     SAPKH60002     Logistics and Accounting
    REgards

Maybe you are looking for