Bundle dependencies problem

Hi, I've a problem with a bundle:
Import-Package:
javax.jcr,version=[1.0,2) -- Cannot be resolved
But in the pom file inside the bundle there's:
<dependency>
            <groupId>javax.jcr</groupId>
            <artifactId>jcr</artifactId>
            <version>2.0</version>
            <scope>provided</scope>
        </dependency>
How is possible this?
Thanks

Well then there is something wrong with your POM. I would check to make sure that you don't have a duplicate dependency - perhaps you have both version 1 and version 2 specified somewhere.

Similar Messages

Bundle Install Problem

Hello,
I'm try to make a Matlab bundle, I is very BIG Directory (7GB).
But when I assigned it to device, it fail with Cache Item Error, or if it work, it fail after 40% (In Show Proccess).
I try it on a several devices, and the same problem.
Can someone tell me what is the problem?
Thanks
Yaron

#1 - Make sure to use "Single Piece of Content", but depending on it's
final size, I would not be surprised is there were still issues.
If so, then break it down and install 3-4 Sub Directories as separate
"install directory" actions, again as "Single Piece of Content."
On 7/24/2014 4:36 AM, yaronw1 wrote:
>
> Hello,
> I'm try to make a Matlab bundle, I is very BIG Directory (7GB).
> But when I assigned it to device, it fail with Cache Item Error, or if
> it work, it fail after 40% (In Show Proccess).
> I try it on a several devices, and the same problem.
> Can someone tell me what is the problem?
>
> Thanks
> Yaron
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Fragment Bundle Classpath problems

Does anyone have any tips for solving classpath problems in fragment bundles? I'm getting a no-class-def that I can't explain.
I've used maven to create a fragment, hosted by com.day.crx.sling.server, to create a custom login. It needs to call a web service, so I've included httpclient-4.2.3.jar. I can see this jar listed on the deployed fragment's Bundle-ClassPath, via the osgi>bundle console. When I inspect the bundle that maven created, I can find this jar contained in the bundle jar, in the directory specified in the Bundle-ClassPath. I even oppened the httpclient jar to ensure that the offending class (org/apache/http/client/HttpClient) is there.
This is the first fragment that I've tried to build. Is there something I don't know about how they load classes?
Does anyone have any tips or tricks on solving osgi classpath problems? I read that felix has some tools, but I haven't found any documentation about them.

I'm still not sure why the classes didn't load, but I have a solution to my problem - don't try to include the jars in the fragment bundle. I tracked down osgi-ready versions of the libraries that I needed and and installed them.

6600GT and bundle game problem

I'v the msi 6600gt 128 pce card and the game xiii in bundle i installed it but the screen into the menu and also into the game blinking with vertical line, i try to enable vertical sync from driver setting but nothing change, i'v also disabled aa and aniso.....what's the problem?

Quote from: ~Blissard~ on 26-September-05, 04:24:52
ok tank you i try, befor the forceware installation i need to uninstall something?
Uninstall your current drivers then use Driver Cleaner to delete any unnecessary file from the old driver and then install the new forceware driver...
Good Luck

Frustrating dependencies problem

Hi everyone, I've got a problem with a large and undocumented portlet
project I have taken over from another developer who has left suddenly.
Don't worry - not looking for help with anything portal related - its more your traditonal java dependencies that I need some help with!
The structure of the project is somewhat unorthodox with one of the portlet classes being in a JAR file in the WEB-INF/LIB directory. It makes a call to a class called SearchUtils that is present in the project (but outside of this JAR file) in a regular package directory.
I can export the project as a WAR and deploy successfully to a development Websphere 5.0 server and it runs fine - but when I try to run it locally on my IDE portal test environment, I get a NoClassDefFoundError for the SearchUtils class despite it being present in the project and in the exported WAR.
I get the feeling that the JAR file containing the portlet is being loaded first and it seems to be unable to resolve the SearchUtils dependency at the time of loading.
I don't understand why the project works on our servers but not locally. I am using WSAD 5.1.2 and Portal Toolkit V5.0.2.2 (Windows).
Could anyone shed any light on how these kind of issues can be resolved?
Thanks
Marc

have i posted this in the wrong forum or is it so simple a question i should just know?
(voice echoes into the distance)

Dependencies problem for Maxima

I tried to install maxima but I got this error :
pacman -S maxima
error: unresolvable dependencies:
maxima: requires clisp<=2.39 but it is not in the sync db
How can I fix it ?

I think it's a bug vs a mirror problem. It's been about a year. Anyway instead of waiting a long time, you can build the clisp 2.41 package using the PKGBUILD found here....
http://bugs.archlinux.org/task/6263
You will also need to build libsigsegv 2.4 as clisp depends on it and it's not in archs data base. The PKGBUILD can be found here...
http://bugs.archlinux.org/task/6262
You might need to add a line to both PKGBUILDS....
arch=('i686')
Then you should be able to install Maxima from extra or wxmaxima from aur community.
Last edited by Leigh (2007-06-01 22:00:33)

Post-restore Time Machine/bundle backup problem

Earlier this week the HD in my iMac died. I had the drive replaced and performed a full restore from my Time Machine backup. The four hour restore went fine.
The next day I turned Time Machine back on. I expected it would want to perform a complete backup of the restored machine. It appeared to start okay, calculating changes and deleting old backups. But then it started doing that in a loop: checking changes, deleting backups, cleaning up, checking changes, deleting backups, etc. After about five cycles I just left work and let it do its thing. Twelve hours later when I got home it still hadn't done a backup, and appeared to be stuck in 'deleting old backups.' So I went ahead and stopped Time Machine.
Now, if I turn TM on or initiate a manual backup, it checks for changes, spends a long time at 99% during that process, then eventually unmounts the bundle, goes to cleaning up, and then hangs there until I manually stop it.
I've tried disk utility, but anytime the backup bundle is mounted, Disk Utility locks up with the spinning beach ball before I ever get to drag the bundle into the window and try to verify/repair.
Any suggestions? At this point I'd be fine erasing the entire bundle and starting new backups from scratch, but I'm not sure how to properly "reset" Time Machine, and of course I can't the bundle to appear in Disk Utility.

blevenstein wrote:
Earlier this week the HD in my iMac died. I had the drive replaced and performed a full restore from my Time Machine backup. The four hour restore went fine.
The next day I turned Time Machine back on. I expected it would want to perform a complete backup of the restored machine. It appeared to start okay, calculating changes and deleting old backups. But then it started doing that in a loop: checking changes, deleting backups, cleaning up, checking changes, deleting backups, etc.
Yes, that cycle could go on for a very long time. Assuming the TC's disk was near full, TM would have to delete a whole lot of backups to make room for a new full backup. Unfortunately, it has to mount the sparse bundle, delete a single backup, dismount the sparse bundle, compact it, then mount it again to see if it's made enough room. The word "excruciating" isn't enough!
Now, if I turn TM on or initiate a manual backup, it checks for changes, spends a long time at 99% during that process, then eventually unmounts the bundle, goes to cleaning up, and then hangs there until I manually stop it.
It's probably still deleting old backups, although it's possible there's one that it can't delete, and is stuck on it.
I've tried disk utility, but anytime the backup bundle is mounted, Disk Utility locks up with the spinning beach ball before I ever get to drag the bundle into the window and try to verify/repair.
That does sound like the sparse bundle is now hopelessly corrupted.
Any suggestions? At this point I'd be fine erasing the entire bundle and starting new backups from scratch, but I'm not sure how to properly "reset" Time Machine, and of course I can't the bundle to appear in Disk Utility.
First, of course, turn TM "off" via TM Preferences.
If there's nothing else on the TC's disk, erase it. Use the +*Airport Utility+* app, in your Applications/Utilities folder. Select +*Base Station > Manual Set-Up+* from the Menubar, then Disks in the tool Bar, then Erase.
If there's other stuff there that you want to keep, and can't copy elsewhere temporarily, just delete the sparse bundle via the Finder.
Then you should be able to turn TM back on and have it start fresh (I'd strongly recommend connecting your Mac to the TC via an Ethernet cable to speed up the initial backup, if at all possible). If there's a problem, you can try the "reset" procedure in #A4 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.

Bundle messages problem

In bpm I trying to bundle messages. In the loop, in container step I append messages to multiline element "list". In the monitoring I see some entries in the "list", but in transformation step take part only one message. In sxi_cache there is an information: "The container element LIST is written, but not read or exported".
Where could be an error?

Hi,
when u define a loop,just see whether u have defined a contaniner object like counter which appends or bundles all the message until the required condition is satisfied.this condition can be specified using a container object where
u give the target message as the multiline element
and u specify the conditon for the container object(COUNTER) there.
so till the condition is satisfied the message will be collected in the multi line element.
regards
jithesh

Blackberry Update Bundle 1133 Problem

Hi,
I am having numerous problems trying to update my Blackberry Curve 9360 software.
Firstly, my blackberry is not connecting to the Desktop Manager.
When it does randomly decide to connect, it automatically starts the update, but freezes everytime at different points in the update.
I am hesistant whether to remove my phone or not as i don't want to damage it...
This is very frustrating as no matter what I do, it is freezing along the way and wasting 4-6 hours of my time.
I left it on overnight last night and it still froze and couldnt complete the update.
Please help!!!

I have been struggling with this issue for few days now , I was unable to reload the original OS that came with the device on my windows 8 as well as my Imac. The only way I could use my device is to apply what AimanSallam suggested. I don't even know if this file loads original OS or not.

[Solved] Cannot upgrade system, dependencies problem!

When I run
# pacman -Syu
I get
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: catalyst-utils: requires xorg-server<1.9.0
However, X -version returns
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
What do?
Last edited by Deusdies (2010-10-03 06:36:31)

Read the comments on the AUR page:
http://aur.archlinux.org/packages.php?ID=40833
* and please search for this yourself before posting...

Some dependencies problem [SOLVED]

For some days when I try to do an update I get this:
:: Synchronizing package databases...
testing is up to date
current is up to date
extra is up to date
unstable is up to date
community is up to date
danimoth is up to date
:: Starting full system upgrade...
resolving dependencies... done.
looking for inter-conflicts...
:: libwnck conflicts with libwnck-compiz. Remove libwnck-compiz? [Y/n] y
done.
error: failed to prepare transaction (could not satisfy dependencies)
:: libwnck-compiz requires emerald
If i try first to remove libwnck-compiz, it tries to also remove emerald, which I don't want!! What's to do?
Last edited by RaisedFist (2007-04-01 17:40:12)

JGC wrote:
Hmm, seems this message is still not right. Pacman reversed the error message, it should say "emerald requires libwnck-compiz".
I added versioned depends to all gnome packages, libwnck-compiz doesn't suffice anymore because it's an older version, so pacman wants to replace libwnck-compiz, but fails doing so because emerald needs that.
Solution is simple: grab the unofficial PKGBUILD for libwnck-compiz, update it to match the official libwnck version and install it. Other option is to use emerald from extra, which depends on the normal libwnck.
I have emerald installed from extra... so I will try the PKGBUILD stuff.

DC dependencies problem

Hi,
I have created two DC's - one java DC, and one J2EE components/Library DC. Java DC include only one Class. This class is added to public part (two times with purpose compilation and purpose assembly). I have added both public parts of Java DC two "used DC" in library DC and checked build, deploy and run time check boxes. But when i try to deploy library dc an "unresolved dependencies found" error occured (my java dc coudn't be found).
What made I wrong?
Regards
Bogdan

Hi,
Libraries are typically used during 'Build Time' and 'Run Time' only.
while adding the 'Used DC's', please check build and Run time only.
hope that helps.
Regards,
S.Divakar

Dependencies problem

I am trying to install on my vps Oracle XE but throwing the following error. I don't know from where can I download the dependencies?
error: Failed dependencies:libaio >= 0.3.96 is needed by oracle-xe-univ-10.2.0.1-1.0.i386
centOS is installed on my vps
Thanks & best regards

[root@cc ~]# rpm -e oracle-xe-univ
[root@cc ~]# rpm -ivh downloads/oracle-xe-univ-10.2.0.1-1.0.i386.rpm
error: open of downloads/oracle-xe-univ-10.2.0.1-1.0.i386.rpm failed: No such file or directory
[root@cc ~]# rpm -ivh /downloads/oracle-xe-univ-10.2.0.1-1.0.i386.rpm
Preparing... ########################################### [100%]
1:oracle-xe-univ ########################################### [100%]
Executing Post-install steps...
You must run '/etc/init.d/oracle-xe configure' as the root user to
configure the database.
[root@cc ~]# /etc/init.d/oracle-xe configure
Oracle Database 10g Express Edition Configuration
This will configure on-boot properties of Oracle Database 10g Express
Edition. The following questions will determine whether the database should
be starting upon system boot, the ports it will use, and the passwords that
will be used for database accounts. Press <Enter> to accept the defaults.
Ctrl-C will abort.
Specify the HTTP port that will be used for Oracle Application Express [8080]:9090
Specify a port that will be used for the database listener [1521]:1521
Specify a password to be used for database accounts. Note that the same
password will be used for SYS and SYSTEM. Oracle recommends the use of
different passwords for each database account. This can be done after
initial configuration:
Confirm the password:
Do you want Oracle Database 10g Express Edition to be started on boot (y/n) [y]:y
Starting Oracle Net Listener...Done
Configuring Database...Done
Starting Oracle Database 10g Express Edition Instance...Done
Installation Completed Successfully.
To access the Database Home Page go to "http://127.0.0.1:9090/apex"
[root@cc ~]# sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jan 28 07:36:07 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system/bassam
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Enter user-name:

Business Components Project Dependencies Problem

Hi everyone,
I have a workspace on 9i that has four projects. All of them use the Entity Objects contained on the first project. If i tell the other projects they depend on the first one (on Project Settings -> Project Dependencies), even so the View Objects i create cannot see the Entities created on the first project. Shouldn't it be possible to create a separate project for them? do i have to put the entire model (VO, EO, VL, AO) in one single package? is there any way to only reference the other project's EOs?
Thanks very much in advance!
Thiago Souza

That's a feature in 10.1.3, you need to add them specifically to your project to access them.

OSGi bundle resolution and OBR in apache felix/sling

What is the proper way to resolve bundle dependencies in sling/felix?
http://stackoverflow.com/questions/10901539/osgi-bundle-resolution-and-obr-in-apache-felix -sling

CQDarren,
The problem may be because you are using joda-time instead of joda-convert.
Try using this dependency
<dependency>
     <groupId>org.joda</groupId>
     <artifactId>joda-convert</artifactId>
     <version>1.1</version>
</dependency>
Thanks,
Aditya

Bundle dependencies problem

Similar Messages

Maybe you are looking for