Burning discs... The difference between Finder and Disk Utility?

I am trying to burn an Ubuntu Live CD. I downloaded the ISO and am trying to burn it correctly. My question is, what is the difference between burning a disk image from Finder and burning it from Disk Utility?

Put a blank disc in the tray.
Right click or control-click the .iso, select open with > disk utility.
When Disk utility opens, select "Burn" in the upper left corner.
Kj

Similar Messages

Repair Permissions differences between Onyx and Disk Utility

If I repair permissions, there are a large number of 'repaired permissions' if I switch between using Onyx (10.6) and Disk Utility. Most of them are in
System / Library / CoreServices
System / Library / Java
System / Library / Frameworks
Why should this be? It makes me think that either Onyx or Disk Utility is doing it wrong. If I had to back which one it is, I'd have to say Onyx is the likeliest suspect. In other words should I avoid using Onyx to repair permissions and just use DU in future?

should I avoid using Onyx to repair permissions and just use DU in future?
Probably, but some permission results are always and repetitively wrong:
As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.

Find the difference between loading and registering the drivers..

Dear Sir..
Could you please help me to find the difference between two activities..
1.Loading the drivers
2.Registering the drivers
What's the difference between loading and registeing the drivers and what activities take place by the JVM to do it all.

Dear Sir..
Could you please help me to find the difference
between two activities..
1.Loading the drivers
2.Registering the drivers
What's the difference between loading and registeing
the drivers and what activities take place by the JVM
to do it all.You load a class - it isn't specific to a driver.
That is part of java - not JDBC.
Normally JDBC drivers register themselves when the class is loaded. This is specific to the driver and has nothing to do with a user of the driver. It is only a concern to someone who must implement a driver.

What's the difference between CoBuilder and other development tools?

Is there any more excellent features about CoBuilder?
or What's the difference between CoBuilder and other development tools?
I just want to know more about it.
Thanks!

One more thing, if you do not have the hard drive icon on the desktop you can get it there by:
click on the desktop so the menu bar says Finder next to the apple logo, click Finder, then Preferences, General, Show These Items on desktop and check the hard disks:
That makes life a lot easier when you want to find out information.
Ralph

What is the difference between ojvm and client versions?

Changing the java vm from client to ojvm result in the following error:
Errormessage:
java.lang.UnsatisfiedLinkError: no UniqueC in java.library.path
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm FAILS
Project Settings -> Configurations -> Development -> Runner -> Virtual Machine -> ojvm      RUNS OK.
Project Settings -> Configurations -> Development ->Paths ->Additional Classpath:
C:\jars\xerces.jar;C:\jars\UniqueC.dll;C:\jars\log4j-1.2.8.jar
What is the difference between ojvm and client versions? How can I make ojvm to find UniqueC.dll?
Various version info:
Output from program:
java version:1.4.2_01
java home:C:\programfiler\JAVA\2sdk1.4.2_01\jre
java vm version:9.0.3.738 cdov
Taken from JDeveloper Help About:
Oracle IDE     9.0.3.10.35
UML Modelers Version     9.0.3.9.4
Business Components Version     9.0.3.10.7
java.version     1.3.1_02
java.vm.name     OJVM Client VM
java.vm.version     9.0.3.738 o

However, Adobe offers extra paid services to create PDF or to export PDF to other formats. You are not required to buy them, however.

What is the difference between upgradation and migration.

Hi Guru's
what is the difference between upgradation and migration.
actuallly i involved in upgradation project, here my role is
1. first i check the query's in 3.5 save the query and transport the query. and check the query in bex analyzer also.
2. go to BI .7 find the query;s ,give the query name and save the query ,
3. once save the query, again will come to 3.5 open the query , it will not open. this is my job here,
come to 7.0 check the query in analyzer also.
i am having littile bit confusion, how it will comes query in 7.0, why are u saving the query's in 3.5 and 7.0
query's already available in 7.0 why are u doing this work?
can i know the upgrades those objects, is it neccessary, if necessary how can i upgrade.
infoobje , transferrules, transferstructure ,infosoure, datasoure,updaterules, ods, cubes.
Points will be Assingned ,
Thanks & Regards
prabhavathi

Hi,
I was talking in a general sense not on a query level.
If your taling about migration in that level meaning as a part of larger upgradation (in your case 3.x to 7) there may be many places where you need to do this kind of activities.
Fr eg migration into new data flow, Migration of Web templates from BW 3.x to Netweaver 2004s, etc
Hope this helps.
Thanks,
JituK

What's the difference between jsp and jsf?

who can tell me what's the difference between jsp and jsf?
I'm puzzled when I found some of the technology in jsp is so similar to the ones in jsp( javaserver page)

Hi,
Find the difference between JSP and JSF
1. A developer has more control with JSP, but (should) get easier development with JSF
2. Event handling is done differently in JSP (HTTP) and JSF (Java)
3. The UI is designed differently (or should be at least) with JSP (markup) and JSF (components).
4. The end product should also be defined differently - JSP page versus a JSF application.
Is this the only thing that is need to make a decision for either or? Probably not. There are other pieces that need to be taken in account when deciding which technology to use - tools support, enough components, type of application etc.... At this point there are not enough JSF components (although there are some interesting projects underway - Ajaxfaces, Myfaces, ADF Faces, and WebChart 3d) and enterprise tools support is still limited to a few tools vendor. Looking at our ADF Faces components they are currently available as early access (not production) and demands for these components are stacking up, literally, outside my office doorstep. Although I would love to make them production - now! - it is not a viable solution since we are still checking features and fixing critical bugs.
All this combined - not enough enterprise level components in production, lacking tools support etc... - leave customers in a vacuum where the decision is either to continue with JSP, since it is mature and has a wide developer base, or move forward with JSF not sure if the support, or the developers will be there. This is particularly sensitive to customers that need to get started now and be production by summer.
If you are in this vacuum here are some key points promoting JSF:
1. Fundamental unit is the Component
2. Built in event and state management
3. Component sets can be provided by any vendor
4. Closer to ASP.Net or Swing development
5. Choice of UI technology
6. Scale up (rich clients)
7. Scale down (mobile devices)
8. Built into J2EE containers in J2EE 5.0 (tentative)

What's the difference between JRE and HotSpot

What's the difference between JRE and HotSpot?
Where can i find HotSpot for Solaris?
tks!

The difference between the two is explained at:
http://www.sun.ca/software/communitysource/hotspot/
and
http://www.sun.ca/software/communitysource/hotspot/faq.html
It's included in the J2SE v1.3.1 release.

How to calculate the difference between intdate and getdate

Hi,
My requirement is to get the data for all the claims where the difference between transactiondate and getdate() should be less than or equal to 7 which means any claims that happened in the past week.
So, my query would be something like this
select * from claims
where transactiondate-getdate < 8
But my transactiondate is in int format such as 20150331 and getdate would be in the format of 2015-03-31. Can someone please help me on how can i achieve the difference between these 2 date formats in the where clause.
Please let me know if you have any questions or if i am unclear.
Thanks

Hi SqlDev12,
Please find the below condition in your query,hope it would help you
DATEDIFF(DD,CAST(CAST(TransactionDate
AS
VARCHAR)
AS
DATETIME),GETDATE())
< 8
Thanks & Regards,
Praveena.

What is the difference between pause and save in Hyper-V?

hi,
What is the difference between pause and save in Hyper-V?
What are the benefits of using each function?
Thanks

WHen you save VM, Hyper-V saves VM state to disk and frees all memory and CPU resources used by VM. When you pause a VM, Hyper-V saves VM cpu state in memory, and then stops VM's cpu processes without releasing its memory. Since no disk operations are involved,
pausing and resuming can be done much faster than saving and restoring a VM.
Gleb.

Can someone explain the difference between TIER_WEB and TIER_WEBDEV

Hi All,
We have two sets of values in Context file as below.
<TIER_ADWEB oa_var="s_isAdWeb">NO</TIER_ADWEB>
<TIER_ADFORMS oa_var="s_isAdForms">NO</TIER_ADFORMS>
<TIER_ADFORMSDEV oa_var="s_isAdFormsDev">NO</TIER_ADFORMSDEV>
<TIER_ADWEBDEV oa_var="s_isAdWebDev">NO</TIER_ADWEBDEV>
Could you explain the difference between
TIER_WEB and TIER_WEBDEV
and
TIER_ADFORMS and TIER_ADFORMSDEV

These values in a shared APPL_TOP system. Pl see ML Doc 745580.1 (Apply Patches in a Shared Application Tier File System Environment) for an explanation.Not necessarily in Shared APPL_TOP, even in traditional multi-node installation you will find these values in the application context file.
I never came across any document which describes the difference between TIER_WEBDEV and TIER_WEB, I just can say that these variables always have the same value.

What are the differences between api and sdk

Hi,
Could anybody clarify for me what are the difference between API and SDK? I googled for the answer, and couldn't find any thing on this topic.
Many thanks in advance.
javasfan

Is it correct to say that "a SDK includes all the
APIs"? or "API sits on top of the SDK"?It's a bit weird to say either. First, the JDK doesn't include all APIs. Just the J2SE core API. Others, like 3rd party libraries or J2EE are not included. Second, if you mean the API docs, they're also not included IIRC.
It'd technically only be correct to say "the SDK provides an API", I guess. The example is very lame, but: if the SDK is a machine, the API is the sum of its buttons and levers and gauges and intakes and outlets and exhausts. The API docs are the manual.

What is the difference between ntp and ctssd ?

hello everyone
could you please describe the difference between ntp and ctssd? which one should be used?
thanks
John

ntp is OS level service which synchronize the system clock with a remote server over the Network Time Protocol (NTP).
CSSD oracle processes (Cluster Services Synchronization Daemon) monitor the health of RAC nodes employing two distinct heart beats: Network heart beat and Disk heart beat. Healthy nodes will have continuous network and disk heartbeats exchanged between the nodes.

What's the difference between trace and log in XI?

Hi all,
On both J2EE and ABAP, there are both tracing and logging functionalities. Can anyone explain me the difference between trace and logging?
Regards,
Hui

From SAP Notes
Log file:
A log file contains generally intelligible information for system administrators. The information is sorted by categories and is used for system monitoring. Problem sources or critical information about the status of the system are logged in this file. If error messages occur, you can determine the software component that has caused the error using the location. If the log message does not provide enough details to eliminate the problem, you can find more detailed information about the error in the trace file.
The log file is located in the file system under
"/usr/sap/[SID]/[instance]/j2ee/cluster/server[N]/log/applications.[n].log" for every N server node.
Access the file with the log viewer service of the J2EE visual administrator or with the standalone log viewer.
Trace file:
A trace file contains detailed information for developers. This information can be very cryptic and extensive. It is sorted by location, which means by software packages in the Java environment, for example, "com.sap.aii.af". The trace file is used to analyze runtime errors. By setting a specific trace level for specific locations, you can analyze the behavior of individual code segments on class and method level. The file should be analyzed by SAP developers or experienced administrators.
The trace file is located in the file system under
"/usr/sap/[SID]/[instance]/j2ee/cluster/server[N]/log/defaultTrace.[x].trc" for each N server node.
Access the file with the log viewer service of the J2EE visual administrator or with the standalone log viewer.
Regards,
Prateek

What si the difference between crete and create insert operations.

Hi
In ADF 11g,what is the difference between create and createinsert operations.
if anyone knows plz tell me.Any document about this plz provide me.
Any help is appreciated.
Sailaja.

Hi,
CreateInsert: Creates a new row that becomes the current row, and inserts the
new blank row into the data source.
Create: Creates a new row that becomes the current row, but does not insert it.
--> normaly you would use createinsert
Doc you can find here (search for Createinsert): http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974.pdf
br
Peter

Burning discs... The difference between Finder and Disk Utility?

Similar Messages

Maybe you are looking for