Bury 9050 and 6120c

I recently bought the above two mentioned products.
Yesterday I got my new car with the bury 9050 car kit. I wasn't aware at the time that because of certain features that 6120c has, I will not have full use of the car kit.
Due to its support of a2dp I cannot use voice tags directly from the carkit. I need to press the voice tag button from the phone which is a great distraction during driving.
Also - due to 6120c using S60 - there is no automatic synch option of the address book. The only way to send the addresses to the carkit is as usercards via BT and even then, I don't get the username to appear on the carkit screen - only the number...
I was told there's a way to bypass the synch issue but so far I haven't found a solution and am quite frustrated.
The bury site does offer an applet for S60 systems to help with the synching but my mahine says it is not supported.
Any info you can menion here to help with these issues.... thanks.
Vered

The 6120 Classic is Great at sound!
It gives a very very high sound.
You can change your ringing volume which i don't think you can do on a 6300.
The camera maybe the same the focus on the camera is abit better than the 6300.
The video recorder is amazing, the sound on the video is probably the best.
Edit: Sorry about the seconding, But it seems psycho got here before me SorryMessage Edited by 6280 on 02-Oct-200709:54 PM
Nokia N95
V 20.0.015
0546553

Similar Messages

HELP - USB Phone parent and 5530 and 6120c

It was impossible to connect my mobilephones (6120 classic and the new 5530 xpress music) to my PC via USB.
Everytime I connect, there is a messagge "nokia usb phone parent" ... impossible to install this device.
My OS is Windows XP sp2
Nokia PC suite version 7.1
Nokia OVI suite version 1.1.
I read other topic, but in my folder windows\system32\drivers THERE ISN'T a file named WDF01000.sys!!!
WHat could I do???
I'm very sad, because of buying this new 5530...

Hi:
You download the drivers onto another PC with a CD burner, and you burn them to a CD.
Insert the CD into the PC's DVD drive and install them that way.

Combining boost and bury with dgidx sort parameters

I have setup productprice as dgidx sort parameter so as to show the product listing from lowest to highest. But, when I try to boost some record to the top, the record shows up at the first but the order thereafter is random. I want the boosted records to show first followed the other records in sorted order. I tried the same thing with burying the records and the sorting order is lost. Is there a way to boost and bury records and still continue to keep the dgidx sort index for the records displayed between the boost and buried records?
Thank you.

I used relevance ranking with static module and sort on the same field with in the template. This enabled the sort parameter and relevance ranking parameter to flow through from the workbench along with the boost and bury data. Finally, I got to the combined list which had boosted and buried data along with the sorted data in the middle.
<Property name="navigation_records">
               <NavigationRecords xmlns="http://endeca.com/schema/content-tags/2008">
                    <RelevanceRanking>static(productRank)</RelevanceRanking>
               </NavigationRecords>
          </Property>
          <Property name="navigation_records">
               <BoostBuryResultsProcessor     xmlns="http://endeca.com/schema/content/xtags/2010" />
          </Property>
<NavigationRecordsEditor propertyName="navigation_records" label="Record list">
                    <RelevanceRankingChoices label="Relevance ranking">
                         <RelevanceRankingChoice label="By Product Rank" relevanceRanking="static(productRank)" />
                         <RelevanceRankingChoice label="By Price" relevanceRanking="static(productPrice)" />
                    </RelevanceRankingChoices>
               </NavigationRecordsEditor>
               <editors:RecordStratificationEditor
                    propertyName="boostStrata" buryProperty="buryStrata" label="Customize Results List" />

My tool bar and Layers pallet are behind my free floating files how do I get them on top?

I have been a Photoshop CS user for about 13 years...I recently downladed CS5 to try it before I buy it. I've been a CS3 user for 3 or 4 years now. I love Photoshop but other than Photoshop I am not a very savvy computer user. So please bear with me as I try to explain my problem.
When I open PSCS5 it fills my computer screen completely and looks like this: A thin 1/2 inc strip on teh left that holds my "tools", a wider 2 inch strip on the right that holds "Layers, Channels, Paths" and a 1 1/2 inch strip on the top, then a big work area in the middle.
I usually have 2- 12X12 300 dpi new files open AND 10-15 photos or scrapbook elements and papers open to work on at any one time.
In prior versions of CS the tool strip and layer pallets strips were ALWAYS on top so I could access them no matter how much was open on the screen. In CS5 I keep burying them and have to dig them out to use them. When I use "Float All in Window", which I need, using Tabs does not allow me to see everything I need to see to work on documents, how do I get the tools and layers on TOP only?
THANKS for listening...I hope you can help!
Theresa

You probably need to undock the panels on the right and the toolbox by clicking and dragging on the top out into the workspace.
Then move them back to the sides of the workspace without docking them (the blue line means they are going to dock)

Phone switches off on THB Bury car kit

I've installed a THB-Bury Take and Talk kit into my Range Rover but the phone (Nokia 6230i) switches off a minute after I switch off the ignition. This happens whether I have enabled the "ignition detector" on the phone settings or not. I've got a simple MBC cradle in my other Land Rover and the phone stays switched on all the time, even if I disconnect the power. Can anybody help?

Thb Bury kits will do this but you can wire the blue ignition wire to red permenant live with no problems. If you ever change your cradle to a Bluetooth one you will have to change this back in order to make the device search.
Danny B
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Need help choosing how to extend my existing home network to my detached garage?

I have done as much research as possible on this scenario but cannot seem to match the ideal solution with my wants. Perhaps I simply just do not understand networking as well as I thought I did. Either way, any helpful information or suggestions are greatly appreciated.
Objective: Extend my wireless network to my detached garage.
My current ISP provider is Time Warner Cable. I have RoadRunner Extreme, which in my area gives consistent speeds of 50 Mbps download and 5 Mbps upload when I am connected via ethernet cable. When I upgraded to the "Extreme" package i found out I was forced to use their Motorola SB6580 ... its a DOCSIS 3.0 cable modem + wireless router. I was able to access the Motorola's setup options on the internet and I disabled the wireless function. This has allowed me to use my Time Capsule as the primary router to provide wireless access on my home network. I have not had any issues with this setup and is my preferred way to operate.
I have recently moved my home office to the 2nd story of my detached garage and need to extend my wireless network to meet the demands of all my gear. I have decided to achieve this goal by going with one of the following 3 options:
1.) enable the wireless function on the motorola modem making it the primary router. move my time capsule out to the office and use it in bridge mode. However I do not think I understand bridge mode correctly. I thought the secondary router (in this case my TC) in bridge mode needed to be connected w/ an ethernet cable at all times to enable this feature? If I understand similar networking discussions I will lose the ethernet ports with this option? If this isnt called Bridge mode once i take away the ethernet cable what is it "technically" called?
2.) buy a 2nd airport extreme base station and create the same type of wireless network extension setup. The difference here is I would leave my motorola's wireless features disabled, use 2 apple products that speak apples to apples wirelessly and relieve myself of all the headaches involved with a neopolitan setup. This seems like the obvious choice b/c Apple products are much more user friendly, but I dont want to spend the $200 on a new router if I can achieve a comparable setup by just enabling the equipment I already have.
3.) use either of these 2 scenarios above & go buy a 150' ethernet cable to join them together. if this is the case wouldnt a $50 hub suffice on the end of the cable? I dont necessarily need to have wireless, just reliable connectivity. I can access the existing wireless network now, but download speeds are not great and things really start to slow down when i have multiple clients connected. I would rather not have to drill through exterior walls, bury conduit and install learn how to install data wall plates, but i will if this is the pros far out way the cons.
Current modem/router placement: if standing @ the front door of my 1 story house facing out towards the street my motorola modem/router is in the front right-hand corner of the house.
Distance location of the detached garage office setup: if standing @ my front door my my work area is in the far back left corner of my property. it is approx 175' from the router and on the 2nd story of the garage. I said 150' cable earlier b/c i could relocate the router to a bedroom on the opposite end of the house, however this would eleminate the current wired status of the items connected to it and I would prefer to keep them wired in.
clients connected in the house: (4) apple tv's; Roku; Xbox; Wii; Playstation 3; (2) Lenovo laptops; iPad; (2) Blackberry's; (2) iPhones; iPod touch; (2) wireless netowrk printers; (2) smart tv's ... a handful of these are currently wired into the time capsule now which provides an uninterupted viwing experience for the MLB package. This of course trumps all opportunity costs involved with moving the router. There is nothing more frustrating than a screen buffering in the botton of the 9th inning after you've sat there for 3 hours.
clients connected in the office: (2) 27" imacs; apple tv; iPad; network printer; Wii; Harmony Link universal remote; Mac Book Pro ...
I have approx 5TB of digital media that is shared over the network via shared iTunes libraries that I would like to access as well. iCloud helps with all of our household gadgets as far as acessibility but with all the backups going on simutaneously it also creates headaches when you need the throughput. I need to do a better job of managing those settings. nonetheless, I would like some guidance on the best way to extend my current netowrk, suggestions for better scenarios i did not mention and thus am probably not aware of and any networking 101 schooling if it doesnt sound like i understand the way bridge mode/network extension works. sorry for the long post and thank you for your time & help.

Ethernet beats all other solutions hands down..
A single ethernet connection from wherever is the closest point in the house to the garage office... wins. You can plug a router working as AP and switch or pure switch on to it. Get a cabler in to do the job.. and they can probably figure it out and do the whole job whilst you scatch your head.. yes you will pay for it.. but a cabler knows how to do it. And most likely leave the inside network exactly as it is. Since office is important to be reliable.. there is one and one only reliable method.. ethernet.
If the garage and house are on one electrical circuit.. which is doubtful if it is a separate building then EOP adapters can often work well.. They do not handle earth leakage protection, breakers (rather than fuses) or meters at all well.. but if they are simply all connected to power.. behind the same meter and using old fashioned fuse box.. EOP rated at 200mbps or some now are 500mbps can work reasonably well. Speed about the same as wireless at its best but if it works when installed will generally not change with the weather, moon, and wind direction which wireless is liable to do.
Wireless bridging.. hmm avoid if possible. For reliable connection no.. apple products can do wireless repeater but as you mentioned that turns off the ethernet ports except for the Express.. that is the only unit you can use as a bridge and plug a switch into it. Why Apple why??
So if you want to bridge two points by wireless buy specialised wireless bridge.. that means an AP in the house plugged into the existing network.. and AP unit perhaps on the outside of the garage.. or in windows if you have a window in the house that looks at a window in your office. Look at products from companies like ubiquiti.. they are not too expensive but professional equipment and designed for precisely this kind of work.
Hence the reliability is dramatically better than domestic stuff.. and will require a lot less work to maintain the link.
Conclusion.. wire it.
Unless you rent the house.. an investment in ethernet cabling install once properly and forget .. beats every other solution even if it costs x5 as other solutions.

How long does it take to repair a damaged cable?

I am wondering if anyone reading this can advise me. I'm sorry if it's a long read. Grab a brew and a biscuit
My partner and I live in a small cottage adjacent to a working farm in Wales. For the third year running, the farmer has ploughed the field that our telephone line is buried in and in doing so, has cut through our line leaving us with no land line phone or Internet access.
Unfortunately although the farmer is apologetic about the inconvenience this causes us, he is also fairly unrepentant; the line has been laid in the middle of a working field and he says that it is simply not buried deep enough to avoid being damaged by the machinery. The field is part of his livelihood and the ploughing is a necessary part of that.
Until quite recently we had a BT Business line and on the two previous occasions that this happened, they sent along an engineer and the line was repaired between 24 and 48 hours after we logged the problem.
This year we no longer have the Business line. We phoned in the fault to the call centre on Friday 23/3. We were told that the fulfilment date would be within 3 working days (Wednesday 28th) but in actual fact would probably be sooner. This sounded fairly reasonable. At this point we thought we would get the promised status updates via SMS.
On Saturday at 2pm an Openreach engineer turned up at the door, which is fairly impressive on the face of it. However, in spite of the fact that we had already identified the fault, he spent five minutes or so inspecting the box that the line runs into at the back of the house. For some reason he then cut the line where it enters the box with a pair of wire cutters, before announcing his conclusion that the problem was a break in the line somewhere off the premises (which we already knew and reported as such when we phoned in the fault).
He claimed he did not have the equipment to fix it in his van and would be back on Monday.
Monday came and went with no sign of an engineer. On Tuesday morning at around 11am he turned up with another engineer. They set up some equipment at the back of the house and disappeared into the field at the side with a device that looked somewhat like a metal detector. Ten or fifteen minutes later they returned and put the equipment back in their van. We thought they would tell us what was happening but they just got in the van and drove away.
During this period we have not been updated at all with the status of our fault. On Tuesday evening I contacted the call centre in an attempt to get an update and the gentleman I spoke to could tell me nothing at all about any progress but claimed that the problem was still scheduled to be fixed by Wednesday (the following day) and promised to call me back the next day between 7 and 8pm.
Wednesday went by with no further progress. The gentleman at the call centre rang me back, true to his word, but then immediately put me on hold for fifteen minutes before coming back to say that the department he needed to speak to was not available due to being 'very busy'. He did, however inform me that the line had been damaged by "pluffing" and that the entire line would need to be re-laid and this would take "special digging equipment" and also "permission from the authorities".
I enquired about escalating the case or could I at least speak to someone who could give me a more tangible update and he told me quite firmly that I was 'not allowed' to make any other calls or speak to anyone else about it. He promised me that he would ring back the following evening. I await his call with little expectation of good news.
In the six days since we reported the problem the Openreach engineers have spent no more than around twenty-five minutes in total dealing with the fault.
In the meantime we are completely cut off and we live in a very remote area. We depend on the Internet for banking, shopping, paying bills, speaking to relatives overseas and also for an online study course, not just for entertainment (although of course we use it for that as well). In short, it is essential to our way of life. Our nearest wireless hotspot is a 45-mile round trip away; I am having to make this trip more-or-less every day.
We are so frustrated at the poor service we are receiving, especially in the light of the stellar service that Business customers get by comparison. Is there anybody out there who can help?

If you would like to contact one of the UK based BT Care Team who moderate this forum, they may be able to help you.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How do I authorize music purchased on a different appleID account other than mine?

Long story. Here goes:
I was married for several years and during that time my now ex-wife and I purchased music from iTunes. Being married and foolishly adhering to that old adage that once two people are married they become one, we set up OUR Apple account using my then wife's (now ex-wife's) e-mail address and created OUR apple ID account under her name. Fast forward eight years, it has now been two years since my divorce and I have tons of music that was purchased using my ex-wife's Apple account. During the last two years, playing the music that was purchased with her account has not been an issue. I select my music that I want to listen to, hit play and it played. But ever since the latest update from iTunes, I now have a HUGE issue. The latest update requires computers to now be "authorized" to play purchased music and any purchased music must now be verified by the account ID and password used to purchase the music. This has created a catastrophe because my ex-wife has now of course changed her Apple ID password which means I no longer have access to about $1000 worth of music because of this new authorization bull crap!! WHY APPLE IS REQUIRING THIS I DO NOT KNOW BUT I DO KNOW I CANNOT AFFORD TO RE-PURCHASE UNDER MY ACCOUNT THE $1000 WORTH OF MUSIC I ALREADY PURCHASED UNDER MY EX-WIFE'S ACCOUNT. This has made me livid to say the least because this seems to be an arbitrary and completely random bull crap requirement from Apple. I have tried to resolve this through Apple support but since it is now nearly impossible to speak to a human at Apple, the email method of communication has yielded diddly squat. I doubt this "forum method" will be any more productive but I have to try. I have begun a social media campaign against Apple's methods of burying random and arbitrary requirements deep within their regular software updates. I've already paid for the music once. I won't pay for it again. HHHHHHHHHHHEEEEEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPP!!!!!!!!!!!!!!!

Lotsapples77 wrote:
If you are in the process of getting divorced, put it in your agreement that the old ID gets frozen and nobody uses it going forward and then set-up new IDs for future purchases. That way, nobody ever looses the old stuff.
Bad suggestion.
If you freeze the ID (simply meaniung each agrees to not make new purchases) then you both have two iTunes accounts to deal with - the old one and a new one.
Also, you legally cannot both use the content.
Just give the iTunes account to one or the other then each has only one iTunes account.
Make a deal. - You get the dishes, I get the iTunes account.

SAP Query PNPCE LDB with additional table.

Hi ABAP Gurus,
I am developing a SAP Query.
I have created an infoset with the custom infotype 9050 and added the table ZPA9050 into the Infoset.
The fields of ZPA9050 is not available as selection fields when I try to Query through SQ01.
(How do I input values to the ZPA9050 fields? A checkbox for making a Selection field is not available in the Query (SQ01).
For every pa9050 entry there exist multiple records of ZPA9050. I need to display the pa9050 fields in the 1st row and the corresponding zpa9050 fields in the subsequent rows.
What needs to be done in order to get them as Selection fields (Input Fields)
A quick reply is highly appreciated.
Useful answers will be rewarded.
Thanks
Pradeep

Hello,
at the time of cretaing INFOSET using transaction SQ02. You can click on the Extra button nad than on the selection tab to add some fields on the selection screen.
Reward if useful
Mohit

Can't view all layers in Photoshop

Hi everyone,
I can't seem to view all my layers in Photoshop (using CS6 via Creative Cloud on a Mac) when I'm duplicating from another file. I have two files usually open - my mockup file I'm working on for a UI project, and various templates files which I'm trying to add various UI element so that I can cut and paste various UI elements into my file. I duplicate a layer group and send it to my file, and they'll show up in the Layers panel, but the content isn't displaying on the screen - I've double checked that it isn't buried somewhere and is visible. Or I've had it where the Layer will display, but it'll transform the contents into a Layer that loses the ability to edit the text.
When I've tried it with various files, I've had mixed results of what I can add to my mockup file. I duplicated layers from a PSD of grds (http://www.ravelrumba.com/photoshop-grids/) ok into my new file, but when I try and duplicate a layer that has a photograph or any Vector art and send it to my destination file, the Layer shows up in the Layer panel but the content doesn't show up on the screen. It works for some PSDs ok, but often not with others. This is true for individual layers and a group of layers.
Is there something specific I have to be able to do to make content display?
I tried the 'video card' issues that I've read about, but someone told me that's more something that affects PCs (I'm running a MacBook Pro).
Any ideas?

I think you solved it! I just looked, and a few of the layers in question ARE off the canvas - so at least I'm seeing them now once I've zoomed out and seen the entire canvas and black background area. I think I wasn't thinking about that because a lot of these template files of all possible UI elements are huge in size, so when I added it to my much smaller document, they are by default going to be off the canvas (especially if the canvas size is 2000 x 8000 pixels!) of the other document. I was thinking somehow that they'd show up by default closer to the middle of my document.
Thank you so much for this!

Adobe Acrobat 10.1.3 Mac OS does not inherit the Duplex setting from PPD for HP printers

Adobe Acrobat for the Mac OS does not inherit the setting from the PPD for the printer. Our current settings for the PPD has Duplex enabled as the default for the HP LJ 9050 and it works in all the application with the exception of Acrobat 10.1.3, Acrobat does not inherit this setting from the driver. Our previous installation with Acrobat 10.1.0 duplex worked well with our PPD configuration where Acrobat inherits the setting from the PPD and duplex is default for all our black and white printers.
We found reference to the reserve issue with 10.1.2 in the forum but that solution is global for all printers and it only works with version 10.1.2
Does anyone know how to set the default printing settings in Acrobat version 10.1.3 to allow us to have duplex printing by default on the Mac.

>It looks like a typical case of finger pointing, Adobe blames Epson, Epson blames Apple. Apple blames the user...
No, you still don't get it...Lightroom is a Cocoa app...it uses Cocoa printing APIs...therefore, print drivers will have to be rev'ed to support those Cocoa APIs...the 3800 (6.10) DOES...the earlier 3.5x drivers won't under Leopard.
What's the driver version of your R800? Something like 3.09? The odds are REAL GOOD (since Epson hasn't released an updated driver for that printer yet) that it's not been updated.
So, you are just gonna have to wait for Epson to rev the drivers, use Tiger instead of Leopard or print out of Photoshop CS3 (which is a Carbon app and uses the Carbon APIs) or not print.
You may not _LIKE IT_ but those are your options...

Increase in capital along with partial transfer

Hi, I have a scenarios as below which has both increase in capital and partial transfer..
Scenario as below:
Hierarchy as on April 2010:
u2026.9099
u2026u2026u2026u2026u2026..9010
u2026u2026u2026u2026u2026..9020
u2026u2026u2026u2026u2026.9030
u2026u2026u2026u2026u2026.9040
u2026u2026u2026u2026u2026.9050
9099 is holding 100% in 9050 as on April 2010. in May 2010 the following changes are happened.
9099 increases its capital on 9050 for an amount of USD 100,000.
Also 9020 injecting capital of USD 6,000 for 2.5% share in 9050
And 9040 injecting capital of USD 75,000 for 32% share in 9500
After the above changes holdings in 9050 are as below on May 2010
9099 is holding 63.5% in 9050
9020 is holding 2.5% in 9050
9040 is holding 32% in 9050.
Pls advice me the steps invlolved in this scenario.
Regards,
Richard

Hi Dan,
Currently the issue is resolved. But it is just correct at Main group level, but still sub group level, i made some manual postings.
Now I have given to user for testing, surely i will write if in case I have any issues.
Thanks a lot for supporting me in all the times.
Regards,
Richard

How to use ExpressionEdit Control in teststand with labview

Hi
I am trying to get the ExpressionEdit Control to work in a labview custom step in teststand, but i have no idea how it works and cant find a solution.
What I need is a simple example.

Hi,
that would really depend on how you want to use it. Do you just want the text from it? In which case there's a property of Text you can get from the control. Architect your code so that when you hit your OK button etc, it grabs the "text" information from the control.
All of the properties and methods are documents (right click the control's fpterm on the block diagram, create >> property (so it created a property node for the activeX control, not a property for the LV control it's buried in) and select things like Text, or an invoke node, and things like DisplayBrowseExprDialog.
You can then right click those, and go to "help for ...." for that property or method.
Unless we know what you propose to use it for, then we can't really help with sample code, since it might not be applicable to your setup. (i.e. text out versus evaluation of the expression, versus displaying the browse expression dialog etc).
You'll probably need to write to the context property to get the correct sequence context to browse with (pass in the "thiscontext" to your vi, and write to the context property of the dialog box.)
Hope that helps
Thanks
Sacha.
// it takes almost no time to rate an answer

Location of iCal Automator Scripts (Plugins?)

AHHHH. Apple you drive me crazy with this stuff!!!
I need to alter an automator script I made for iCal. ... but I can't figure out where these things are stored in my hidden, buried, locked and unalterable system. If I open a iCal set up in Automator, create something new and his save -- where is tha new file hidden! I've looked everywhere!

Finally found it. It's under ~/Library/Workflows/
Just in case anybody else runs into this problem.

Shake licenses in small network

Hi,
I have a small video editing network with Shake installed on a couple of machines. Since the app recognizes the network it won't allow two instances of the app to run with one license. We always knew this but it was convenient to have multiple installs. Now we have bought an extra license but we cannot figure out how to replace the license on an existing installation. Further, when we follow the procedure for un-installing the application and then re-install, it seems not to delete the old serial number...its buried someplace and the documentation does not reveal where. Does anybody know where the serial number file is located? This situation is driving us nuts...
Thanks!

the old serial number..
Try deleting this file:
/Library/Application Support/ProApps/Shake System ID

Bury 9050 and 6120c

Similar Messages

Maybe you are looking for