Bus error in the Forte executable
Hi,
We have an environment with forte' (ver. 3.0.G.2) running
on AIX 4.1 (The name of central server is cld_app1 and the nodemgr start
with the name cld_TDR). In our environment we are using two differnet
repository. In rep1 we have a very simple project (called 'aaa') that
use one small class with two methods. One method print the date & time.
The second method communicate with a serviceobject that use MQSeries to
put/get some messages in the queues.
The project work correctly in test run and in distribuite mode.
If we export the same project (aaa) and we import in other repository
(rep2 in the same environment) the project doesn't work. Infact,
during test run forte' return the following:
Begin Stack Backtrace
=========================================================
=
Trace caused by a bus error in the Forte executable:
ftexec Version 3.0.G.2
IBM RS6000/Aix 4.1
Forte Application Environment (tm), Forte Runtime Environment (tm),
Forte Conductor (tm):
Copyright (c) 1994-1998, Forte Software, Inc. and its licensors.
US Patent No. 5,457,797
Forte Express (tm), Forte WebEnterprise (tm):
Copyright (c) 1995-1998, Forte Software, Inc.
All Rights Reserved.
Unpublished rights reserved under the copyright laws of the United
States.
Fri Mar 13 16:07:45 1998
Fault at 25-Mar-1999 10:42:53, pid '2292', node 'cld_app1':
0xd0b8886c = d0b8886c()
0xd0b88ae4 = d0b88ae4()
qqos_StkTrc: Cannot print stack trace.
Recursive stack trace detected. Exiting.
If we try to run in partitioning mode, the same error appears when
forte' "loading partition into server" with the following adding
message:
Unable to start the partition aaa_cl0_Part1 on any of nodes to wich
been assigned. See the remainder of the error stack for more
information.
In the "more" informations we have the following:
SYSTEM ERROR: Unable to start the partition aaa_cl0_Part1 on any of the
nodes to which it has been assigned. See the remainder of the error
stack for more
information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Thu Mar 25 09:22:21
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
SYSTEM ERROR: Unable to start partition aaa_cl0_Part1 on node cld_TDR.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Thu Mar 25 09:22:21
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
aaa_cl0_Part1. Check server log file for more information about the
specific
problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Thu Mar 25 09:22:21
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Thu Mar 25 09:22:20
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158.19]) in application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu Mar 25 09:22:20
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu Mar 25 09:22:20
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
Thanks in advance
Luz Marina e Massimiliano
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Hi,
We have an environment with forte' (ver. 3.0.G.2) running
on AIX 4.1 (The name of central server is cld_app1 and the nodemgr start
with the name cld_TDR). In our environment we are using two differnet
repository. In rep1 we have a very simple project (called 'aaa') that
use one small class with two methods. One method print the date & time.
The second method communicate with a serviceobject that use MQSeries to
put/get some messages in the queues.
The project work correctly in test run and in distribuite mode.
If we export the same project (aaa) and we import in other repository
(rep2 in the same environment) the project doesn't work. Infact,
during test run forte' return the following:
Begin Stack Backtrace
=========================================================
=
Trace caused by a bus error in the Forte executable:
ftexec Version 3.0.G.2
IBM RS6000/Aix 4.1
Forte Application Environment (tm), Forte Runtime Environment (tm),
Forte Conductor (tm):
Copyright (c) 1994-1998, Forte Software, Inc. and its licensors.
US Patent No. 5,457,797
Forte Express (tm), Forte WebEnterprise (tm):
Copyright (c) 1995-1998, Forte Software, Inc.
All Rights Reserved.
Unpublished rights reserved under the copyright laws of the United
States.
Fri Mar 13 16:07:45 1998
Fault at 25-Mar-1999 10:42:53, pid '2292', node 'cld_app1':
0xd0b8886c = d0b8886c()
0xd0b88ae4 = d0b88ae4()
qqos_StkTrc: Cannot print stack trace.
Recursive stack trace detected. Exiting.
If we try to run in partitioning mode, the same error appears when
forte' "loading partition into server" with the following adding
message:
Unable to start the partition aaa_cl0_Part1 on any of nodes to wich
been assigned. See the remainder of the error stack for more
information.
In the "more" informations we have the following:
SYSTEM ERROR: Unable to start the partition aaa_cl0_Part1 on any of the
nodes to which it has been assigned. See the remainder of the error
stack for more
information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Thu Mar 25 09:22:21
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
SYSTEM ERROR: Unable to start partition aaa_cl0_Part1 on node cld_TDR.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Thu Mar 25 09:22:21
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
aaa_cl0_Part1. Check server log file for more information about the
specific
problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Thu Mar 25 09:22:21
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Thu Mar 25 09:22:20
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158.19]) in application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu Mar 25 09:22:20
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu Mar 25 09:22:20
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= 546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1, taskId =
[546BCA70-E125-11D2-BFFF-B37364EDAA77:0x158:0x1.17]) in
application
"Forte_cl0", pid 20236 on node cld_app1 in environment
Collaudo_TDR.
Thanks in advance
Luz Marina e Massimiliano
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Similar Messages
-
SIGBUS 10* bus error in the iplanet weblogic 7.0 sp2 on hpux 11i
My iplanet web server crashed with the following error messages found in the iplanet error log file:
[11/Nov/2003:04:12:41] config ( 5180): SIGBUS 10* bus error
[11/Nov/2003:04:12:41] config ( 5180): si_signo [10]: SIGBUS 10* bus error
[11/Nov/2003:04:12:41] config ( 5180): si_errno [0]: Error 0
[11/Nov/2003:04:12:41] config ( 5180): si_code [0]: BUS_UNKNOWN [addr: 0x42618307]
[11/Nov/2003:04:12:41] config ( 5180): stackpointer=7690A438
I am running iplanet 6.0 sp 5 with WebLogic 7.0 sp2 on HPUX 11i. There is no error message in the web logic log file.
On the other hands, I have found out that there is a recommended patch for weblogic 7.0sp2 if running on HPUX 11i (CR102314). Would this patch fix my problem? Please help.My iplanet web server crashed with the following error messages found in the iplanet error log file:
[11/Nov/2003:04:12:41] config ( 5180): SIGBUS 10* bus error
[11/Nov/2003:04:12:41] config ( 5180): si_signo [10]: SIGBUS 10* bus error
[11/Nov/2003:04:12:41] config ( 5180): si_errno [0]: Error 0
[11/Nov/2003:04:12:41] config ( 5180): si_code [0]: BUS_UNKNOWN [addr: 0x42618307]
[11/Nov/2003:04:12:41] config ( 5180): stackpointer=7690A438
I am running iplanet 6.0 sp 5 with WebLogic 7.0 sp2 on HPUX 11i. There is no error message in the web logic log file.
On the other hands, I have found out that there is a recommended patch for weblogic 7.0sp2 if running on HPUX 11i (CR102314). Would this patch fix my problem? Please help. -
After Security Update today: "Bus error" when starting "ssh" client
Hi,
I'm using OS X 10.5.2 and updated my system with the newest Safari 3.1 and Security Update a few hours ago. After I did this update, I cant use the command-line ssh client anymore. When I start the ssh, I immediately get a "Bus error" on the shell.
Any suggestions?
Thanks, MarcDisk Utility Permission Repair doesn't do any good either.
I now actually use my Parallels VM to ssh thanks to putty but still...
This is what Crash Reporter has to say:
The application ssh quit unexpectedly.
Process: ssh [323]
Path: /usr/bin/ssh
Identifier: ssh
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: bash [189]
Date/Time: 2008-03-18 23:04:56.717 +0100
OS Version: Mac OS X 10.5.2 (9C31)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000001014
Crashed Thread: 0
Thread 0 Crashed:
0 ??? 0x0004c4e7 0 + 312551
1 ??? 0x0004c56e 0 + 312686
2 ??? 0x0004c7f7 0 + 313335
3 ??? 0x0004b070 0 + 307312
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00001000 ebx: 0x0004c7d5 ecx: 0x0004e338 edx: 0x0004e340
edi: 0x0000101c esi: 0x00000000 ebp: 0xbffffa18 esp: 0xbffff9f0
ss: 0x0000001f efl: 0x00010286 eip: 0x0004c4e7 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00001014
Binary Images:
0x363d8000 - 0x36415fef +ssh ??? (???) <38f6d3ec24f0b372e64c12b15bb319d4> /usr/bin/ssh
0x8fe00000 - 0x8fe2da53 dyld 96.2 (???) <7af47d3b00b2268947563c7fa8c59a07> /usr/lib/dyld
0x90125000 - 0x90129fff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x90841000 - 0x909a0ff3 libSystem.B.dylib ??? (???) <4899376234e55593b22fc370935f8cdf> /usr/lib/libSystem.B.dylib
0x9316d000 - 0x9317bffd libz.1.dylib ??? (???) <5ddd8539ae2ebfd8e7cc1c57525385c7> /usr/lib/libz.1.dylib
0x9317c000 - 0x931a7fe7 libauto.dylib ??? (???) <42d8422dc23a18071869fdf7b5d8fab5> /usr/lib/libauto.dylib
0x931a9000 - 0x93206ffb libstdc++.6.dylib ??? (???) <04b812dcec670daa8b7d2852ab14be60> /usr/lib/libstdc++.6.dylib
0x936a2000 - 0x937d4fef com.apple.CoreFoundation 6.5.1 (476.10) <d5bed2688a5eea11a6dc3a3c5c17030e> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x93adf000 - 0x93b91ffb libcrypto.0.9.7.dylib ??? (???) <330b0e48e67faffc8c22dfc069ca7a47> /usr/lib/libcrypto.0.9.7.dylib
0x93be1000 - 0x93cc0fff libobjc.A.dylib ??? (???) <a53206274b6c2d42691f677863f379ae> /usr/lib/libobjc.A.dylib
0x93d20000 - 0x93e58ff7 libicucore.A.dylib ??? (???) <afcea652ff2ec36885b2c81c57d06d4c> /usr/lib/libicucore.A.dylib
0x93fbc000 - 0x93fdafff libresolv.9.dylib ??? (???) <0629b6dcd71f4aac6a891cbe26253e85> /usr/lib/libresolv.9.dylib
0x94c9c000 - 0x94d4cfff edu.mit.Kerberos 6.0.12 (6.0.12) <3dd13466876a8fe4549cfc1354233ec3> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x94d4d000 - 0x94d54ffe libbsm.dylib ??? (???) <d25c63378a5029648ffd4b4669be31bf> /usr/lib/libbsm.dylib
0x95ca0000 - 0x95e6bff7 com.apple.security 5.0.2 (33001) <0788969ffe7961153219be10786da436> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x966d7000 - 0x966defe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib
0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib -
Hello,
Since this morning, after installing the latest Mac OS updates, my Mac has been really slow, and the dock never appears. My console messages keep printing the following message:
com.apple.launchd[83] ([0x0-0x18a18a].com.apple.dock[929]) Exited abnormally: Bus error
and the system log keeps printing the following related massages:
May 18 20:20:38 nachobike ReportCrash[947]: Formulating crash report for process Dock[945]
May 18 20:20:38 nachobike ReportCrash[947]: Saved crashreport to /Users/<username>/Library/Logs/CrashReporter/Dock2009-05-18-202037nachobike.crash using uid: 501 gid: 501, euid: 501 egid: 501
Does anyone know what might be causing this, and how I can fix it?
Thanks!Since the problem is with the OS and not just the user account -
I'd download the Apple Combo Update from here:
http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate and after run it again. No change?
Then
Reinstall Mac OS using "Archive and Install" method which doesn't affect your user account: http://support.apple.com/kb/HT1545 - Preserve User and Network Settings
Then, after repairing permissions
Run the combo update again.
Repair Permissions 1 last time. -
[SOLVED] Blender 2.5 & "Bus Error"
Hi, I have a problem with the built by themselves and by other versions of blender 2.5 (from svn trunk) ... when you enable the program crashes and displays the information "bus error". The problem lies not in the program, because working on other computers and on the same computer, but running the LiveCD. Do you have any idea what could cause this?
Thanks in advance for the answers.
Last edited by luzakwielki (2009-10-17 23:51:44)skottish wrote:
Welcome to the forums luzakwielki.
By any chance are you using local configuration files created from another OS? In particular the ~/.B.blend file? If so, try starting without it and see what happens.
Thanks - the reason for the error was a corrupted file .B25.blend. -
Problems with the Xserver Bus error
I think this problem started when I updated to 10.4.10, but I'm not entirely sure.
All of the sudden, I lost the Windows Login, the first problem I found was that the "crashreport" couldn't write on file and exited with signal 1 and 10.
Following up on the system.log the application crashing was Spotlight damon.
I remove it from the boot process and now it's not crashing (because is not running )
But I still cannot login, when I restart the server, the screen stays on the part where the "bar" estimate the time to boot, although some of the services are up.
Like LDAP, AFP, DHCP, etc.
I cannot connect with the "Server Admin" remotely, although the "Workgroup Mannager" DOES connect.
I CAN login ssh, but if I try any privileged commands, like "systemsetup", "networksetup", "softwareupdate", I get "Bus error" and there's nothing I can do.
From the system.log I get
Jul 10 21:20:34 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 10 21:20:34 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 10 21:20:35 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 10 21:20:35 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 10 21:21:05 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
"ps xl" gives me this:
UID PID PPID CPU PRI NI VSZ RSS WCHAN STAT TT TIME COMMAND
0 1 0 0 32 -1 28348 212 - S<s ?? 0:47.20 /sbin/launchd
0 27 1 0 63 0 27264 108 - Ss ?? 0:00.00 /sbin/dynamic_pager -F /private/var/vm/swapfil
0 31 1 0 31 0 28216 940 - Ss ?? 0:01.20 kextd
0 35 1 0 31 0 27752 568 - Ss ?? 0:05.62 /usr/sbin/kdcmond -n -a
0 36 1 0 31 0 27844 400 - Ss ?? 0:00.03 /usr/sbin/KernelEventAgent
0 37 1 0 31 0 28612 984 - Ss ?? 0:04.22 /usr/sbin/mDNSResponder -launchdaemon
0 38 1 0 31 0 27592 412 - Ss ?? 0:06.12 /usr/sbin/netinfod -s local
0 39 1 0 31 0 34464 2380 - Ss ?? 0:11.64 /usr/sbin/PasswordService -n
0 41 1 0 31 0 27772 620 - Ss ?? 0:00.02 vpnd -x -i com.apple.ppp.pptp
0 43 1 0 31 0 27284 236 - Ss ?? 0:22.46 /usr/sbin/syslogd
0 45 1 0 31 0 28580 920 - Ss ?? 0:00.26 /usr/sbin/kadmind -passwordserver -nofork
0 46 1 0 31 0 86292 3112 - Ss ?? 0:17.80 /usr/sbin/named -f
0 49 1 0 31 0 118008 3584 - Ss ?? 1:18.70 /usr/libexec/slapd -d 0 -h ldap:/// ldapi://%2
0 50 1 0 31 0 27348 460 - Ss ?? 0:01.59 master
0 52 1 0 31 0 28872 756 - Ss ?? 0:00.25 /usr/sbin/coreaudiod
0 53 1 0 31 0 27780 820 - Ss ?? 0:46.80 /usr/sbin/diskarbitrationd
0 54 1 0 31 0 28340 520 - Ss ?? 0:00.58 /usr/sbin/memberd -x
0 55 1 0 31 0 30368 2856 - Ss ?? 0:22.12 /usr/sbin/securityd
0 57 1 0 31 0 27864 308 - Ss ?? 0:33.99 /usr/sbin/notifyd
0 63 1 0 31 0 27672 520 - Ss ?? 0:06.20 /usr/sbin/distnoted
0 64 1 0 31 0 34644 3616 - Ss ?? 0:10.24 /usr/sbin/DirectoryService
0 66 1 0 31 0 27248 168 - Ss ?? 0:58.58 /usr/sbin/update
0 81 1 0 31 0 29896 1052 - Ss ?? 0:28.71 /System/Library/CoreServices/coreservicesd
0 130 1 0 31 0 27768 212 - Ss ?? 1:41.87 /usr/libexec/crashreporterd
0 177 1 0 31 0 28992 1016 - Ss ?? 0:01.44 /usr/sbin/serialnumberd
0 179 1 0 31 0 28512 1264 - Ss ?? 0:01.66 /usr/sbin/cupsd -L
0 180 1 0 31 0 29308 128 - Ss ?? 0:00.00 nfsiod -n 4
0 191 1 0 31 0 29080 160 - Ss ?? 0:00.00 /usr/sbin/AppleFileServer
0 192 191 0 31 0 81588 9656 - S ?? 2:54.72 /usr/sbin/AppleFileServer
0 193 1 0 31 0 27812 504 - S ?? 0:00.04 /bin/sh ./bin/mysqld_safe --datadir=/usr/local
0 199 1 0 31 0 30224 528 - Ss ?? 0:00.41 /usr/sbin/smbd -D
0 202 199 0 31 0 30224 208 - S ?? 0:00.00 /usr/sbin/smbd -D
0 204 1 0 31 0 27308 128 - Ss ?? 0:00.00 rpc.lockd -w
0 207 1 0 31 0 29716 904 - Ss ?? 0:00.06 /usr/sbin/automount -f -m /Network -nsl -mnt /
0 209 1 0 31 0 28456 688 - Ss ?? 0:11.09 /usr/sbin/nmbd -D
0 210 209 0 31 0 28440 172 - S ?? 0:00.01 /usr/sbin/nmbd -D
0 213 1 0 31 0 29420 868 - Ss ?? 0:00.06 /usr/sbin/automount -f -m /automount/Servers -
0 216 35 0 31 0 28848 1592 - S ?? 0:12.35 /usr/sbin/krb5kdc -n -a
0 219 1 0 31 0 27508 316 - Ss ?? 0:08.14 ntpd -f /var/run/ntp.drift -p /var/run/ntpd.pi
0 348 1 0 31 0 30936 772 - Ss ?? 0:00.46 slpd -f /etc/slpsa.conf
0 402 1 0 31 0 27328 76 - Ss ?? 0:00.00 /usr/sbin/webperfcache
0 19558 1 0 31 0 30292 1064 - S ?? 0:00.36 /usr/sbin/sshd -i
0 23027 1 0 31 0 27844 904 - Ss ?? 0:00.05 /usr/libexec/bootpd -q
0 23341 1 0 32 -1 28352 232 - S< ?? 0:00.00 /sbin/launchd
0 26365 1 0 31 0 29928 1508 - Ss ?? 0:31.98 /usr/sbin/configd
0 26375 1 0 31 0 30268 1056 - Ss ?? 0:06.97 /usr/sbin/lookupd
0 19562 19558 0 31 0 27812 864 - Ss p0 0:00.25 -sh
0 23342 19562 0 31 0 27288 396 - R+ p0 0:00.01 ps xl
G5 Mac OS X (10.4.9) 2 512Gb Mirror DisksOK, I put the things back before my changes.
I run the "privilages", install the Combo package, but everithing stays the same.
Here's the system.log
Jul 11 16:31:30 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jul 11 16:31:27 localhost mDNSResponder-108.5 (May 9 2007 16: 57:18)[37]: starting
Jul 11 16:31:30 localhost kernel[0]: vmpagebootstrap: 124261 free pages
Jul 11 16:31:27 localhost memberd[50]: memberd starting up
Jul 11 16:31:30 localhost kernel[0]: migtable_maxdispl = 70
Jul 11 16:31:28 localhost named[44]: starting BIND 9.3.4 -f
Jul 11 16:31:31 localhost kernel[0]: 91 prelinked modules
Jul 11 16:31:29 localhost lookupd[54]: lookupd (version 369.5) starting - Wed Jul 11 16:31:29 2007
Jul 11 16:31:31 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jul 11 16:31:31 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jul 11 16:31:31 localhost kernel[0]: using 1310 buffer headers and 1310 cluster IO buffer headers
Jul 11 16:31:31 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Jul 11 16:31:31 localhost kernel[0]: DART enabled
Jul 11 16:31:31 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe42198e; max speed s800.
Jul 11 16:31:31 localhost kernel[0]: Security auditing service present
Jul 11 16:31:31 localhost kernel[0]: BSM auditing present
Jul 11 16:31:31 localhost kernel[0]: disabled
Jul 11 16:31:31 localhost kernel[0]: rooting via boot-uuid from /chosen: 1FFA9A97-D6DE-3E6F-8EAD-9C7D29C054DB
Jul 11 16:31:31 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jul 11 16:31:31 localhost kernel[0]: AppleSMU -- shutdown cause = 2
Jul 11 16:31:31 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3500630AS Media/IOApplePartitionScheme/AppleRAID_OfflineV2_Untitled2@3/AppleRAIDMember/AppleRAIDMirrorSet/IMER Server Disk@0
Jul 11 16:31:31 localhost kernel[0]: BSD root: disk2, major 14, minor 8
Jul 11 16:31:31 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x69, SDB vers = 0x01,
Jul 11 16:31:31 localhost kernel[0]: Jettisoning kernel linker.
Jul 11 16:31:31 localhost kernel[0]: Resetting IOCatalogue.
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 1
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 3
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 3
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 3
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 3
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 3
Jul 11 16:31:31 localhost kernel[0]: NVDANV40HAL loaded and registered.
Jul 11 16:31:31 localhost kernel[0]: PowerMac112ThermalProfile::start 1
Jul 11 16:31:31 localhost kernel[0]: PowerMac112ThermalProfile::end 1
Jul 11 16:31:31 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Jul 11 16:31:31 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Jul 11 16:31:31 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
Jul 11 16:31:31 localhost named[44]: command channel listening on 127.0.0.1#54
Jul 11 16:31:33 localhost diskarbitrationd[49]: disk2 hfs 1FFA9A97-D6DE-3E6F-8EAD-9C7D29C054DB IMER Server Disk /
Jul 11 16:31:33 localhost DirectoryService[58]: Launched version 2.1 (v353.6)
Jul 11 16:31:34 localhost launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:31:34 localhost launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:31:34 localhost launchd: com.apple.servermgrd: 9 more failures without living at least 60 seconds will cause job removal
Jul 11 16:31:34 localhost launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:31:35 localhost kernel[0]: BCM5701Enet: Ethernet address 00:16:cb:3a:f0:88
Jul 11 16:31:35 localhost launchd: Server 351b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[54]: exited abnormally: Hangup
Jul 11 16:31:35 localhost kernel[0]: BCM5701Enet: Ethernet address 00:16:cb:3a:f0:89
Jul 11 16:31:36 localhost lookupd[73]: lookupd (version 369.5) starting - Wed Jul 11 16:31:36 2007
Jul 11 16:31:36 localhost mDNSResponder: Adding browse domain local.
Jul 11 16:31:37 imerserver configd[47]: setting hostname to "imerserver.intranet.imeronline.com"
Jul 11 16:31:40 imerserver kernel[0]: NVDA,Display-B: vram [98020000:08000000]
Jul 11 16:31:40 imerserver kernel[0]: NVDA,Display-A: vram [00000000:01000000]
Jul 11 16:31:40 imerserver kernel[0]: AppleBCM5701Ethernet - en0 link active, 1000-Mbit, full duplex, symmetric flow control enabled
Jul 11 16:31:40 imerserver configd[47]: AppleTalk startup
Jul 11 16:31:42 imerserver configd[47]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jul 11 16:31:42 imerserver configd[47]: posting notification com.apple.system.config.network_change
Jul 11 16:31:42 imerserver lookupd[81]: lookupd (version 369.5) starting - Wed Jul 11 16:31:42 2007
Jul 11 16:31:44 imerserver configd[47]: AppleTalk startup complete
Jul 11 16:31:48 imerserver DirectoryService[58]: LDAPv3: [127.0.0.1] Updated Security Policies from Directory.
Jul 11 16:31:52 imerserver kernel[0]: nmbd[207] uses send/recv on a pipe
Jul 11 16:31:52 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:31:52 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:31:52 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:31:52 imerserver launchd: com.apple.servermgrd: 8 more failures without living at least 60 seconds will cause job removal
Jul 11 16:31:52 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:31:53 imerserver /usr/sbin/serialnumberd[179]: serialnumberd: Firewall rule #1 added to allow port 626.
Jul 11 16:31:55 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:55 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:55 imerserver ntpdate[94]: getnetnum: "time.apple.com" invalid host number, line ignored
Jul 11 16:31:55 imerserver ntpdate[94]: no servers can be used, exiting
Jul 11 16:31:55 imerserver configd[47]: target=enable-network: disabled
Jul 11 16:31:56 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:56 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:56 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:56 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:57 imerserver ntpd_initres[258]: couldn't resolve `time.apple.com', giving up on it
Jul 11 16:32:01 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:32:01 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:32:02 imerserver netinfod local[38]: cannot lookup child
Jul 11 16:32:02 imerserver netinfod local[38]: cannot lookup child
Jul 11 16:32:02 imerserver netinfod local[38]: cannot lookup child
Jul 11 16:32:02 imerserver netinfod local[38]: cannot lookup child
Jul 11 16:32:03 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:03 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:03 imerserver launchd: com.apple.servermgrd: 7 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:03 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:32:05 imerserver mDNSResponder: Update kerberos.udp.IMERSERVER.INTRANET.IMERONLINE.COM. refused
Jul 11 16:32:05 imerserver mDNSResponder: Registration of record kerberos.udp.IMERSERVER.INTRANET.IMERONLINE.COM. type 33 failed with error -65553
Jul 11 16:32:05 imerserver mDNSResponder: ERROR: hndlLookupSOA - recursed to root label of _kerberos.imerserver. without finding SOA
Jul 11 16:32:05 imerserver mDNSResponder: RecordRegistrationCallback: error -65537
Jul 11 16:32:05 imerserver mDNSResponder: Update kerberos.tcp.IMERSERVER.INTRANET.IMERONLINE.COM. refused
Jul 11 16:32:05 imerserver mDNSResponder: Registration of record kerberos.tcp.IMERSERVER.INTRANET.IMERONLINE.COM. type 33 failed with error -65553
Jul 11 16:32:13 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:13 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:13 imerserver launchd: com.apple.servermgrd: 6 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:13 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:32:24 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:24 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:24 imerserver launchd: com.apple.servermgrd: 5 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:24 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:32:31 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:32:31 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:32:31 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:32:32 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:32:34 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:34 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:34 imerserver launchd: com.apple.servermgrd: 4 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:34 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:32:44 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:44 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:44 imerserver launchd: com.apple.servermgrd: 3 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:44 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:32:55 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:55 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:55 imerserver launchd: com.apple.servermgrd: 2 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:55 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:33:02 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:02 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:02 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:02 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:03 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:33:05 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:33:05 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:33:05 imerserver launchd: com.apple.servermgrd: 1 more failure without living at least 60 seconds will cause job removal
Jul 11 16:33:05 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:33:15 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:33:15 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:33:15 imerserver launchd: com.apple.servermgrd: too many failures in succession
Jul 11 16:33:33 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:33 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:33 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:33 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:34 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:34:04 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:04 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:04 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:04 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:05 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:34:35 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:35 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:35 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:35 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:36 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:35:06 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:06 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:06 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:06 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:07 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:35:37 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:37 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:37 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:37 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started -
Am trying to access MS SSAS data cube from Java through olap4j driver(through msmdpump.dll). I am able to connect , but when I try to execute a query, i am getting the below error: Please help
me out . (I tested the http://XXXX/OLAP/msmdpump.dll in MS Excel , and it is working fine)
org.olap4j.OlapException: XMLA provider gave exception: <soap:Fault xmlns="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>
XMLAnalysisError.0xc10a0004
</faultcode>
<faultstring>
The CRASHDWHSRG cube either does not exist or has not been processed.
</faultstring>
<detail>
<Error Description="The CRASHDWHSRG cube either does not exist or has not been processed." ErrorCode="3238658052" HelpFile="" Source="Microsoft SQL Server 2012 Analysis Services">
</Error>
</detail>
</soap:Fault>See my other answer where you asked this same question on another thread
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/22dfc400-668d-4bd4-b76d-7c6b9ddda47a/msmdpumpdll-not-getting-registered?forum=sqlanalysisservices
http://darren.gosbell.com - please mark correct answers -
Error in the workflow which executes background synchronous webservice task
Hi,
I am very new to SAP Workflows. I created a workflow with one activity step in it. The activity step actually executes a task TS77000300 (synchronous calculation - its an SAP task). When I test it. I get an error "Error when starting the service" with exception 8987, area SWF_HTTP and message 125 - Object WEBSERVICE method PROCESSBATCH cannot be executed.
I checked in WF_EXTSRV tcode, there is an entry for the background synchronous webservice task.
I checked in SWLWPTSSID table, there is an mapping between task-id and service id from WF_EXT SRV.
I am not sure where its going wrong. Any help resolving this issue is appreciated. Thanks a lot.
Regards,
RajaGurprit/All
Thanks Gurprit for the direction.
Even if I execute the the workflow( WS77000647 from SAP). The first step invokes Process Dialog which asks for three numbers and two operands. When I input all the input params and click calculate button, the second step which is actually the background synchronous task, results in the same error in the workflow log and in the Process Dialog page browser it says "Entries sent for calculation" with the same input screen.
Am I missing anything here to run background synchronous task? Any help regarding this is appreciated.
Thanks & Regards,
Raja -
Why do I get error -17500 when calling a batch file using the call executable step type?
I am calling a batch file using the call executable step type. If the path to the batch file contains a space I get error -17500 and a message stating there was an error in "Post". For example the path to the batch file is "c:\TestWin\Test Files\...\Program.bat" When I run this I get the above mentioned error, however if I change my directory structure so the path is now "c:\TestWin\TestFiles\...\Program.bat" it runs fine. I use the browse feature to find my batch file so it is not me typing in a path incorrectly. I have removed the batch file and I get a different error stating that it couldn't find the file so it appears that for my error it can find the file but can't run it. I am
sure that this has something to do with the fact that batch files are written in DOS but really don't want to resort to changing my directory structure on all my test stations. Is there any way to fix this problem so I can leave a space in my path?It appears I have figured it out. This was on another computer so I was unaware of how they used their computer. I like you got it to work in the temp directory and in fact got the program.bat file to work as long as I put it under the temp directory, but when I switched out to my TestWin directory it wouldn't work, so I removed everything from the directory except the batch file it self and it work. What I found out after adding files in one at a time is that the person had a file called "Test" with no file extension in there "c:\TestWin\" directory. Removing this file made it work. Putting the file back broke it. So it appeares that when teststand was running it followed the path saw a space and attempted to grab the "Test" file instead of bro
wsing into the "Test Files" directory. If you create a file in your temp directory called "temp" with no file extension you will see the same problem. Thank you for your help. -
An error prevents the Change Management Upgrade script from executing
I have Warehouse Builder 10g on a database 10g R1.
On a server linux I have the repository, and on other server (Sun 5.9) I have runtimes for production.
I want execute an upgrade deploy action on one object but I get this error:
An error prevents the Change Management Upgrade script from executing successfully. We strongly advise that this Upgrade is UNDONE and the problem is investigated. Data loss may occur if you accept this Upgrade
Any idea?
Thanks,
Fernando.I review the installation, it was made with a diferent user that database, I get same permission, restart runtimes service and problem was resolved.
Fernando. -
I have imported a project to Encore and while it worked the first time, this time I get an error in the check project winder of can't execute chapter 2 end action because of final end marker? I have two different sections that have buttons on the menu. When you get to the end of the first sequence I need it to go back to the menu and it is saying that it can't because of the end action on the final marker.
The 'unable to locate' message means that you don't have those music files on that computer, or that they are not where iTunes is expecting them to be. How did you get the entries for those tracks in your new computer's iTunes ?
If you still have your old computer then you can try copying them over again : http://support.apple.com/kb/HT4527
You may also be able to re-download them from the store (checking for available downloads only checks for items that have not yet been downloaded, not for past purchases) via the Purchased link under Quick Links on the right-hand side of the iTunes store home page (re-downloading music isn't possible in all countries). You may need to delete them form your library first (where you are getting the 'unable to locate' message), otherwise iTunes will assume that you still have them somewhere and won't let you re-download them.
Re-downloading : http://support.apple.com/kb/HT2519 -
Runtime Error setting the 'Environment' when running with TWO executables
Hello,
I'm using XML DB for the very first time, so this problem may be easy to solve.
I'm currently running a test with TWO separate C# Console executables.
One executable correctly sets up the Xml Environment, Manager, and Container and simply adds XML documents to the database.
The second executable simply is supposed to run some XQuery commands. I use the same Environment, Manager, and Container code to do the initialization. However, I'm having trouble with setting up the 'Environment' in this executable. I get the following error:
DbEnv::open: DB_RUNRECOVERY: Fatal error, run database recovery, exception code = DATABASE_ERROR
On this line of code:
Sleepycat.Db.Environment env = new Sleepycat.Db.Environment(envdir, envconf);
I've only seen code examples that run in a SINGLE executable. I'd really like to access the XML DB from multiple threads/executables, but am having trouble.
Can there be multiple 'Environments' and 'Managers' for the one XML Db?
Will provide more data if needed, and thanks for any help!
MattI guess you addressing this in the wrong forum. I see tags like "sleepycat" and "C#", probably thats why nobody replied.
-
Hi All,
I have a SP, which calls xp_cmdshell in it. This SP is being used in a MessageQueue.
The SQL server and Agent services are configured using a Domain service account, and this service account has a login under the sysadmin server role as well.
When the MessageQueue is invoked, the SP returns the following exception :
The xp_cmdshell proxy account information cannot be retrieved or is invalid. Verify that the '##xp_cmdshell_proxy_account##' credential exists and contains valid information.
But when I execute the SP in SSSMS, under the service account login (which is a sysadmin), it successfully executes.
I even created the ##xp_cmdshell_proxy_account## credential, but the Message Queue never stops giving this error.
This is how the queue looks like :
CREATE QUEUE [dbo].[TestxmCmdshellQueue]
WITH STATUS = ON ,
RETENTION = OFF ,
ACTIVATION ( STATUS = ON ,
PROCEDURE_NAME = [dbo].[SpWithxp_cmdshell_Init] ,
MAX_QUEUE_READERS = 5 ,
EXECUTE AS N'dbo' ),
POISON_MESSAGE_HANDLING (STATUS = OFF)
The Service account is configured as a Local Administrator in the Local Server as well.
I am running SQL Server 2008 R2 Sp2 on a Windows Server 2008 R2 Enterprise Machine.
Please let me know what I am missing here.I Made TRUSTWORTHY = ON in the database and the SP executed without any problem by the Message Queue.
No, that is not the solution.
Yes, it works. And it is a lot simpler than the solution I pointed you to. But it opens a big security hole. Or, well, depending how things you are on your server, it may be entirely uncontroversial. But as long as I don't know anything, I will have
to assume that it is a security hole. And even if there is no one today on the server who is db_owner in the database but who should not be sysadmin, that could happen in the future.
So, to anyone else who is reading this: don't set your databases to be trustworthy, unless you fully understand the implication. The correction solution is to use certificate signing. I describe this in detail in my article, and this article also explains
the dangers with TRUSTWORTHY.
http://www.sommarskog.se/grantperm.html
Erland Sommarskog, SQL Server MVP, [email protected] -
What does "The System bootstrapper has crashed: Bus error" mean ?
What does "The System bootstrapper has crashed: Bus error" mean ?
Was this an upgrade?
You could repair disk and permissions, but I suspect a corrupt OS X. I would reinstall the operating system.
COmmand R on reboot if your Mac is newer. -
Relinking Error. The executables for Oracle8 Entrprise (RDBMS) were not made
I am trying to install Oracle8051EE_Intel.tgz.
Relinking Error. The executables for Oracle8 Entrprise (RDBMS) were not made successfully.
The error in the install.log file are:
(( OIERR-SYSTEM: make -f ins_rdbms.mk ORACLE_HOME=/var/database/ora001/app/oracle/product/8.0.5 install ))
When running the command:
make -f ins_rdbms.mk ORACLE_HOME=/var/database/ora001/app/oracle/product/8.0.5 install
from the /CD-ROM/rdbms/lib directory, I get the errors:
/var/database/ora001/app/oracle/product/8.0.5/lib//libplsf.a(spssimb.o): In function `pss_gets':
spssimb.o(.text+0x4ef): the `gets' function is dangerous and should not be used.
/var/database/ora001/app/oracle/product/8.0.5/lib//libgeneric.a(skgfr.o): In function `skgfrcre':
skgfr.o(.text+0x4de): the `llseek' function may be dangerous; use `lseek64' instead.
/var/database/ora001/app/oracle/product/8.0.5/lib//libserver.a(hoco.o): In function `hoconsi':
hoco.o(.text+0x104d): undefined reference to `__strtoq_internal'
/var/database/ora001/app/oracle/product/8.0.5/lib//libserver.a(hoco.o): In function `hoconui':
hoco.o(.text+0x126a): undefined reference to `__strtouq_internal'
collect2: ld returned 1 exit status
make: *** [var/database/ora001/app/oracle/product/8.0.5/rdbms/lib/oracle] Error 1
How do I resolve this problem?I don't know if it can help you, but I had to face something quite like that installing Oracle 8.1.7 on Aix 5L.
In fact, you don't need to have C compiler on the system to relink products. "ld" and "ar" commands are used to do it. But you need to have all the necessary libraries installed. So check if filesets bos.adt.lib and bos.adt.libm are installed and then try a "relink all" from an oracle's shell.
Maybe you are looking for
-
AirPort Extreme on a BIG Scale
We are trying to use the AirPort Extreme on a bigger scale then most people. In one of my schools we have 20 AirPorts and each is connected via the WAN port to our existing Ethernet. We are not using WDS, and the IP distribution is shut off. We are h
-
Can I connected to two Database in jdbc page?
I need to run two queries in my project but it has two different databases.
-
I'm putting this out so others might not find the solution quicker than I did. I purchased a new AE3000 to use on a Windows 7 desktop that had been direct-connected to the router. Had issues with the installation. At first setup could not even find
-
Revision: 16912 Revision: 16912 Author: [email protected] Date: 2010-07-14 09:14:37 -0700 (Wed, 14 Jul 2010) Log Message: Update the version of commons-logging to 1.1.1 to match LCDS. We need this library to support commons-httpclient.jar. Modi
-
New to mac, and unlike IE explores which occupies 100% of screen size, Safari only open to a maximum of 90%. How do i maximize the Window size and get rid of the bottom tags(itune,ilife tags etc) , which bother me. Thanks