Business area not populating in Vendor line at the time of MIRA

Hi,
At the time of MIRA the Business Area is not appearing in Vendor line items.
Though the corresponding line items do have the Business area.
even in case we have one business are for the entire document the Business Area is not coming.
We are in ECC 6.0 but with classic ledger ( New GL not activated).
But instead of background invoice verification if we do MIRO the same document is populating the
corresponding Business Area in the vendor line item.
Please help me to resolve the issue.
Regards
Somendra N Dey
08007151893

Hi
In the MIRA header in details tab the Field Business Area is available.
Regards
Somendra N Dey

Similar Messages

Business Area not showing during MIGO line item process

Hi,
We are doing the MIGO process w.r.t. PO....there in Line item...Business Area not showing in its Field.
If we create another MIGO document with other PO, BA is showing...
What should be the issue...

Hi,
is this an account assigned PO ? Please check the PO document for the acct asst Tab .
whather the BA is populated .?
Please reenter the detials of GL account and try again for the PO.Please check whather the co object is properly assigned or not ?
Regards,

Business Area not populating in Accounting Doc Post Division Change

Hello Friends,
Platofrm: SAP R/3
We created a new Divisions (06) and assigned them to the Material in Plant 155. A new business arae (PTIC)
was also created and assigned to sales are 0020 00 06.
Later we did couple of assignments (Enter Str>Assig>SD>) where we assigned business area to division - Plant - Sales Org
and Dris Channel ) .
Now to validate the changes I am posting a Sales order in sales area 0020 00 10 - to see whether the newly created business area is getting populated or not. Post sales order - delivery- goods issue and _accounting doc - in the accounting document
I dont see the business arae PTIC. Old business area (PTI) is getting populated.
I wanted to know whether Material is controlling the business area in accounting doc and where I am missing the link.
Our aim is to see business area PTIC in final accounting document so that we are sure that the material - whom we assigned division -06 is giving business are ptic.
Please assist and provide suggestions.
George

Hi,
Go to SPRO > Enterprise Controlling > Consolidation > Integration: Preparation for Consolidation > Preparation in the Sender System > Further Settings for Business Area Consolidations > Sales and Distribution
And check the below settings:-
- Assign Rules per Sales Area
- Assign Business Area per Plant and Division
- Assign Business Area per Sales Area
Regards,
SDNer

Automatic Business Area Derivation Rule for Vendor Line Item in MIRO

Hello Experts,
We trying to use Business Area concept for our client.
I have completed all configuration setting for the business are derivation like
1. Creation of Business Area
2. Assign Business area to Plant / Division (OMJ7)
3. Business area determination from sales area (TVTA)
4. Business Area by Sales Area
5. Checked Field Status Group for Customer and Vendor Reconciliation Account
It is working for for compelete sales process and in Procurement cylce it is picking business for MIGO transaction both the line items.
But
In MIRO (Purchase invoice posting) it is automatically taking Business area to the GR/IR line item and it not taking Business area for the vendor line item (automatically)
I comes know that there is a business area derivation rule for this to happen automatically.
Can you please propose the soulution for the automatic derivation of business in MIRO for vendor line item.
Regards,
Chalapathi

Hi,
I do mot think there is a BA derivation rule for MIRO.
The best you can do is:
1. Use a user exit or enhancement point for deriving the BA from the GR/IR line and populate that in the vendor line
or
2. You make BA as a mandatory field in the field status group for the vendor reconciliation account. This will then force the user update the BA. We use this option. This is so because at times, the vendor item may need a different business area than the GR/IR line.
Cheers.

Business area not defaulted for tax line via OKC9 or OBBH

Hi SAP gurus,
I had created subsitution rule in both FI and CO, OBBH and OKC9, which did not to default business area into the tax line.
In OBBH, it was overwritten by SAP standard to blank during debug, OSS explains that due to integration with other sub modules, it does not allow. In OKC9, since tax is balance sheet account, it does not work.
I had also tick "business area financial statement" in global parameter setting.
Could any gurus advise ?
Reagrds,
Soo Wan

Dear Eric,
Please help, I have the same problem;
For transaction FAGL_FC_VAL foreign currency valuation new journal entries are generated for foreign exchange profit/ loss, it is done in batch proces but while executing batch it is asking foe cost element to be updated, i have fixed cost center in OKB9 for Business Area ( but i am having two cost centers for two business area for single cost element ie GL- Forex Gain/ loss.
I need tp put Business area manually for each line item while running the batch.
We are in ECC 6.0
I want to develope Substitution, please advice
Substitution for FI ????
Substitution for Co????
you can communicate me on neeleshpitaleattherateyahoodotcodotin or neeleshpitaleattherategmaildotcom
Your help in this will be highly appreciated,
Thanks,
Nilesh

Business area not populated in Accounting Document

Gurus
Business Area showing in Billing document, item detail tab but not populated in Accounting Document BSEG/GSBER.
We have upgraded 4.5b to ECC6.
regards
imdad

Hi:
This happens in instances if one invoice contains multiple business areas, then only blank space will appear in accounting document for business areas. If this is the case then invoice split should happen based on business area. Invoice split can be done through VOFM data transfer - billing document.
However if invoice contains only one Business Area then please check in IMG --> Sales and Distribution --> Basic Function --> Account Assignment / costing --> Business Area Account Assignment....check whether you have assigned the Business Area to Sales Area to Rule "1".
Regards

Business area not defaulted for tax line item

Hello Friends,
I am posting Customer invoice, when I simulate the invoice that time Output tax is automatically calculating the tax. My problem is, in the Output tax line item business area is required field which is appearing in display mode.
T code - OBXM. Here we will configure this and at the month end we will run the following transactions.
F.5D, F.5E.
I want to know step by step cinformation for this. If you have any documentation send it to [email protected]
Rams.N
Points will be assigned for the right answer

hi,
If you are using business area method then you want to create all sales tax GL with business area optional. And You create one GL like Tax clearing account(business area optional)and assign the same in OBXM against all the sales tax GLs.
Then you want to run F.5d and F.5e on everymonth.
govind.

Business Area not populated for F110 but it works for FBZ2

Hi all Gurus,
I have marked my co code in OBY6 for Business Area Financial Statement. In GL a/c, I also marked the FSG to be "Required" field. For posting key field status, it set to "Optional"
During F110 auto payment run, the Business Area field was blank and without any update.
But if I perform the same for manual pymt posting via FBZ2, Business Area is mandatory field.
Please help to undertand the logic.
Regards
jloh

hi
use substitution for business area.

IPhoto - pictures are not populating

All of a sudden, my pictures within iphoto are not populating. I can see the outline, but the pictures are not there.

Hi Van,
did you do anything right before this started happening?
did you have a crash or have to force quit iPhoto?
Did you rename any photos or folders in the iPhoto Library folder in the finder?
do you have the latest version of iPhoto?
have you tried a rebuild yet?
Try this:
Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
Close iPhoto
Duplicate the iPhoto Library folder
Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
iPhoto 4 or later: Rebuilding the iPhoto Library
Lori

MIRO - Business Area not getting updated in Vendor Line item

Hello friends,
I am posting Vendor invoice in MIRO transaction.
After Posting if i see the financial document generated,
Business area has not got updated in Vendor Line item.
What could be the problem ?
Please help me out.
Hari Prasath

Hi Kale,
Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
On the other hand, have a look to the note and kba below:
41294 - Business area in customer/vendor item
Kba 1727802 - Business area not getting populated in sales/ purchase tax

Business area not determined for line item?

Hello All,
I am trying to create a sales order. When I enter a line item and enter plant for the item, it gives me an error "Business area not determined for the line item #" and it does not accept the item.
I have already checked in the enterprise structure in IMG that the business area is defined and assigned for this plant.
Is there anything else need to be done? Do we have to define or assign the business area in material master?
I would appreciate if somebody can answer.
Thanks.

There are three rules for determining a business area:
o   Rule 1: plant and division
o   Rule 2: for each sales area
o   Rule 3: for each plant and item division
See what you are missing

Graphical mapping issue, repeated lines are not populating

Hello All,
i have mapping where i need to map source node and its coresponding subelements to target node and its subelemtns based on certains condition, which i did using If condition.
Now my issue is, when mapped source node with condition , conditional field is not in the same node which i am mapping. It is in the parent node of the node which i am mapping. SO when i mapped to target node, only one occurence only its populating in target side even When lines repeated more than once its not populating all lines corespondingly. Please let me know how to populate all line items when i have validation field in parent node and child node and its subelemnts to be mapped to the target node. ( Both parent node and sub node in source and target node are unbounded) .
Thanks in advance.
Regards,
Kalpana

Thanks for your reply, My source structre looks like below.
I have to map rows node and its coresponding fields to target node Lines which is unbounded and to its subelements when collection name = 'MATGRP_COLLN'. I did it using if condition but , only one row tis getting populated in target LIne node. next repeated row values are not populating in target side.
- <extensions>
+ <collection name="REGION_COLLN" />
+ <collection name="DIVISION_COLLN" />
+ <collection name="DTL_PRCNG_COLLN" />
+ <collection name="COUNTRY_COLLN">
- <collection name="MATGRP_COLLN">
- <row>
- <fields>
<OBJECTID>-2147483540</OBJECTID>
<UNIQUE_DOC_NAME>-21474835401248121690973</UNIQUE_DOC_NAME>
<DISPLAY_NAME />
<MATGRP_ITEM_NO>1</MATGRP_ITEM_NO>
<MATGRP_NAME>10100000</MATGRP_NAME>
</fields>
</row>
- <row>
- <fields>
<OBJECTID>-2147483539</OBJECTID>
<UNIQUE_DOC_NAME>-21474835391248121706160</UNIQUE_DOC_NAME>
<DISPLAY_NAME />
<MATGRP_ITEM_NO>2</MATGRP_ITEM_NO>
<MATGRP_NAME>10101500</MATGRP_NAME>
</fields>
</row>
</collection>
</extensions>
</object>
</objects>
</fcidataexport>

Business Area not determined in batch posting.

Dear SAP experts,
My client is on 4.6c system. Till now they were not using business area. Recently we have activated business area balance sheet. While posting FI document manually using FB01, business area derivation happens correctly on vendor/customer/balance sheet line items. However, when same document is posted via bdc session, business area derivation is not happening. I also tried to manually simulate bdc session. Still no derivation happened. Any suggestion/solution will be highly appreciated.
Unit.

Hi Jayesh,
How system is deriving business area in case of vendor/customer when you are doing FB01. Means its through some substitution rule or some default value.
Regards,
Ankit Agarwal

PAYEXT - Business Partner not Populating

Hi,
We are generating PAYEXT IDoc's from F111.
The Idocs are not populating the Business Partner number in the segment.
Can some one tell me what the issue could be.
Thanks in advance,
Sneha Singh.

1. Goto MDS load cockpit transaction and run the sync for that one customer... Check the log to see why the BP is not created
2. Since you are saying the order was created without any issues, check the credit account on the sales order (header data or table VBAK) check if a BP is created for the credit account (in case credit acct is different to sold to)
3. If sold to = credit account, check if your sd-fscm Badi is implemented correctly. Among other things this Badi copies credit info such as risk class from fscm onto the sales order. Check if this Badi is implemented correctly (I'm assuming u've already activated fscm credit management)
4. Finally you may want to consider adding a line to OVA8 for blank risk category, for all credit control area and block the document for max doc value of -.01. This will prevent any sales orders from getting created when the proper credit info is not copied over from fscm (or if the credit data had not yet been maintained on the BP)
Cheers,
Krishna

Business Area being Populated in F-02

Hi Guru's,
While trying to post a document using F-02, I require to have one line with a blank in Business Area field while the other line is input with a value in Business Area field.
When simulating the document, the line which had a blank Business area is populated with the business area input on the second line.
Is this the standard behavior or is there a work around so that one line can be posted with a blank Business Area?
Pls. note there are no substitutions activated.
Thanking in advance.
Asiri

I am not able to understad your busness requirement.
It seems that you have checked the Busines area Balance sheet in your settings.
So when ever there is a BA in first linei item the system in herits this in the second line item. This is the standard behaviour.
What do you wnat to do without a BA in the second line item? What is your business need?
Sarma

Business area not populating in Vendor line at the time of MIRA

Similar Messages

Maybe you are looking for