Business Content Loads

We are looking at building a new Inventory model, in a test environment which has the standard Business Content cube, extractors etc activated.
At the moment the extractors have been loaded to a ZInventory cube. What I need to know is can I just carry out loads from the BX, BF and UM extractors directly to the Business Content cube which has never been loaded or do I need to follow the steps outlined in the How to Inventory Management guide? Thanks

Hi Niten,
What are the info-objects in the ZInventory Cube? I guess the info-sources, update rules and the info-objects are the same as that for the standard cube(though you are not using it). If that is the case then you could load it in the same way as the How to Inventory Management guide.
Also speak to the business owners why they went in for a Z Cube as there must have been a valid reason for this. You could then reason out if following the steps in the How to Inventory Management guide serves your purpose or not.
Bye
Dinesh

Similar Messages

Business content load data from multiple clients

Hi Experts,
we are implementing Business Content for FI-GL. On the system there is already the content enabled and the extraction from one client (let's say Client200). We now have to extract data from Client300. How can we do that?
Thanks in advance,
Costi

You should create another Source system on the other client and copy the transfer rules from the extractor mapping them on the other source system . After this you can create the infopackage and load data
hope it helps

XRPM Business content: Loading of cube 0RPM_C02

Hi,
We are implementing the xRPM BW business content and find one scenario very interesting related to the cube 0RPM_C02( Staffing Resource Assignment)
When we look into the BW content documentation in help.sap.com we find that this info cube can be updated from the following data source/info source, the first 3 being the transaction data.
Data source     Info source
0RPM_BUPA_AVL      0RPM_SRAR_03
0RPM_ROLE_D     0RPM_SRAR_02
0RPM_RELATE_D     0RPM_SRAR_01
0RPM_TEAM_H     0RPM_TGUID
0RPM_RELATE_H     0RPM_RELGUI
0RPM_ROLE_H     0RPM_ROLGUI
0RPM_PM_01     0RPM_PROJ/0RPM_PROJ_GUI
0RPM_RESOURCE     0RPM_RESGUI
The first three combinations have already been working and data loaded successfully in the cube. What I am not able to understand as
1> why the cube should also get updated from the last 5 data source/info source combination which are basically for master data and loaded before we load the cube.
2> There is no business content (update rule etc) that connect these info source to the cube 0RPM_C02. Do we need to manually create the update rules for these?
3> Why the cube is getting loaded from the master data, which are also characteristics of its own dimension.
Please answer point by point.
Thanks
Arun

can u please post the answer here again. I'm like in the same scenario now.
Regards

Error while loading external data using Business Content

Hi,
I am new to BW and I'm stuck up with this problem.
I'm trying to load data from external file using business content cube(0PUR_C01)and infosources(2LIS_02_ITM/S012/SCL).
I first installed the above mentioned cube and data sources.
Then I activated the update rules and transfer rules, without any changes.(I don't know what changes might be required!)
Monitor is showing successful load but the cube has 0 enteries.
Even the simulation of update is showing data in the data target.
Can someone please guide me through this ?
Its really urgent....
Thank you all in advance.

Hi Sharmistha,
Welcome to SDN !! Does your monitor shows any records extracted till PSA ? Go to the details tab -> processing and click on each node to check what monitor shows.
Hope it helps.
Thx,
Soumya

Business Content not Loaded?

Hi Folks,
Is it possible that during a BI install certain business content does not get loaded into the system? Is there a way to reload missing business content. The problem I have is as follows:
When activating business content cube 0CRM_C08 with data flow after I get an error while collecting business content. The error is
"Object 0PH_C01 (InfoCube,CUBE) could not be collected for object 8GKZ2KVI3EB2XK75QSDO85Q4Z (Query,ELEM)"
Now when I go to take a look at the available cubes in the meta data repository 0PH_C01 does not exist.
Anyone else have similar issues with business content not being loaded in the system? I find that I have this problem in both our BI7.0 system and our BI 7.0 IDES system
Thanks.

HI
I have checked in my system also. 0CRM_C08 This InfoCube contains date about the CRM activity items. It is based on the Activity Items ODS object (technical name: 0CRM_ACTI).
As you mentioned like that The cube is not based on the another cube(0PH_C01). And it is not available in Metadata Repository also.
May be you are looking in wrong way. Please check it once again.
Any furhter questions are there please let me know.
Thanks & Regards,
Nagaraju.V

Load data from R3 to BI for a business content infocube

Hello
How can I create infopackages and DTP to load the data from R3 to BI(PSA) and PSA to Info Cube?
and what are the neccesary infopackages for infocube 0PT_C01?
Thank ypu

Hi
While installing business content for info cube, select grouping as indataflow before.
http://help.sap.com/saphelp_em70/helpdata/en/c2/a5cfa183be443b8184aec085cf9a85/frameset.htm
In the above link you will get all the business content related personal time management.
Please refer the below link for Cube business content instalation.
http://www.google.co.in/url?sa=t&rct=j&q=0pt_c01%20info%20cube%20in%20sap%20bi&source=web&cd=4&ved=0CEUQFjAD&url=http%3A%2F%2Fhelp.sap.com%2Fbp_bw370%2FBBLibrary%2Fdocumentation%2FD13_BB_ConfigGuide_EN_DE.doc&ei=veM0T-yHL8zIrQeIrqG6Dw&usg=AFQjCNHenO_2pi4VeEMXztFpLZUqwRGbpA&sig2=ZMKgnoHQnloljqermoF_GA
Regards,
Venkatesh

Loading Business Content cubes

Hi
I am new to BW area, and am posting a basic question, Once the Cube is activated from Business content what are the steps to Load data into the infocube and how to identify the right info sources for that cube, can any one please explain?

daniel,
the business content from BW already prescribes certain infosources for infocubes (via update rules assigned to them).
once you have identified which datasources are prescribed by business content activation, you should activate the datasources related to these infosources. replicate the datasources in the source system, then activate the transfer rules in BW. then create an infopackage under the infosources and schedule the extraction.
you could also go look around in the forums since this has already been discussed in great detail. =)
hope this helps, and spread the love (by rewarding points). =)
ryan.

Copy Business content cube, load data and activation.

Hi BW gurus,
I am new to SAP BW. Like to know if you guys have any document of your own or at some site which gives me step by step instructions to copy , load data and activate a cube of business content(ex: Purchasing data 0PUR_C01).
I will assign points to the good answers.
You can also send me any documents you have on my email id: [email protected]
Thanks.
Syed Arifuddin.

1. Yes. Preparation - Connectivity between R/3 and BW and general setting is Basis team and Security or Authorization team work.
2. Customizing the Extractors. Extractors are programs to extract data from SAP R/3. You may need to customized those to fit your requirement. This requires little ABAP skill. You can check more information here.. http://help.sap.com/saphelp_nw04/helpdata/en/7a/27bcf087c7464db8b95eaa717b6e6a/content.htm
3. Set Application Active Indicator : This step is to be carried out in the R/3 system.This is not just a Purchasing related but it is a Cross-client application setting to link tow clients.
Hope this helps.
Laxmikant

SRM Business Content

Hi All,
I would like to know the infosource of 0SR_C01 procurement overview(aggregated) cube. while on help.sap it shows 0SR_MC01 as a multiprovider for 0SR_C01. But could not find the infosource for the same.
I would also like to know if anyone has the list of content infocubes and their infosources for SRM. Please share it with me.
Thank in Advance
Niren

Hi ,
for all business content, you can start here
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
scm
http://help.sap.com/saphelp_nw04s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
and bi best practice
http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
Check this link for SRM Business Content information: http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
DataSources
New DataSources have been created for NW 2004s BI Content Add-On 2 and SRM 5.0. These are described here, along with their extraction logic.
The following graphic shows the data flow from the DataSources to the DataStore objects
Structure
Each DataSource has an extraction structure and a data extractor. Generally, this is an RFC-capable function module.
There are two types of extraction: Specific extraction and generic extraction:
Specific extraction is strongly oriented towards the data model of the BI System and the necessary extract structure. It executes DataSource-specific processing steps.
The logic contained within the generic extraction is implemented centrally and can therefore be reused by the specific extraction modules. The generic extraction deals with access to the SRM database and is similar for each DataSource.
Generic and specific extraction
Extraction logic in detail
Data extraction involves the following six function modules:
InitLoad
InitLoad is called as soon as an initial upload is started in the BI System. In other words, it is executed when data is loaded into the BI System for the first time. The module can restrict the data extraction according to filter criteria that were defined in BI during extraction (for example, extract the data for a particular timeframe). InitLoad packages the data before it is transferred to the BI System.
DeltaLoad
DeltaLoad is called when a document is modified in the SRM System. The module writes data that has accumulated since the initial loading to a delta queue.
Data Collector
The Collector reads the required data from the database in the source system. For performance reasons, the data is then buffered in system-internal tables. The tables have the same structure as in the database. This saves time and effort, because data conversion is kept to a minimum.
Data Consolidator
The Consolidator groups data that belongs together from a business point of view. The consolidated data is stored in internal tables and is prepared for further processing.
Data Normalizer
The Denormalizer prepares the source data for the BI System. It calculates key figures that are required for the report but are not contained on the database and converts data types in the source system to data types of the BI System. Depending on the BI data model, the system now decides how each row is filled with data.
Data Mapper
During mapping of the data, the system defines which fields of the denormalized data structure are assigned to the fields of the extract structure. In this way, flat and one-dimensional lines are generated from the data.
The following table shows the technical names of the function modules of the individual DataSources:
Description
0SRM_TD_PO
0SRM_TD_CF
0SRM_TD_IV
0SRM_TD_PO_ACC
InitLoad
BBP_BI_PO_EXTRACT
BBP_BI_CF_EXTRACT
BBP_BI_IV_EXTRACT
BBP_BI_PO_ACC_EXTRACT
Collector
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
Consolidator
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
Denormalizer
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
Mapper
BBP_BI_PO_MAP
BBP_BI_CF_MAP
BBP_BI_IV_MAP
BBP_BI_PO_ACC_MAP
DeltaLoad
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
Hope this helps,
Regards
CSM Reddy

Error while activating process chains from Business Content

Hi All,
I am trying to activate the SAP Business Content Process Chains, which load data to 0PM_DSO2 in Plant Maintenance Area -
1.Delta Upload : MTTR / MTBR (0PM_DELTA_P02)
2.Initialisation : MTTR / MTBR (0PM_INIT_P01 )
And they are failing with the error
"Object 0PAK_BZJNGI4SYTTJM5DXY8IPMHB0C could not be found in version
Message no. RS_EXCEPTION280"
"Message Text
Object 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0 could not be found in version
Technical Data
Message type__________ E (Error)
Message class_________ RS_EXCEPTION (Exception Messages)
Message number________ 280
Message variable 1____
Message variable 2____ 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0
Message variable 3____
Message variable 4____ "
In the collected objects, these two infopacks are not present also.
Can you please let me know how to proceed?
Many Thanks in Advance,
Vineeth

Hi
Make sure these 2LIS_17_I0NOTIF and 2LIS_18_I0NOTIF datasources are being installed.
Check these links.
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
Chandu.
Edited by: Chandu on Jan 22, 2009 2:24 PM

Copy Update Rule from Business Content

Hi All,
Currently I have activated some standard BI Content E.g. InfoCube 0FIAR_C03, DSO 0FIAR_O03, InfoSource 0FI_AR_4 and all the corresponding update rules.
Now I have copied both InfoCube and DSO into another customized version E.g. ZAR_C03 and ZAR_O03. I managed to copy the same update rule from InfoSource 0FI_AR_4 to ZAR_O03 using the template but I don't have the option of copying the same update rule from ZAR_O03 to ZAR_C03 using the same update rule of 0FIAR_O03 to 0FIAR_C03.
I know I have the choice to manually re-create all the details but is there any other workaround?
Please read through carefully my question. I have seen some forum asking to load data from 0FIAR_O03 to then ZAR_O03 then so forth.
Purpose of doing the above method is because I want to remain the business content as what it is and just to copy it to Z version for customization.
Thanks
David Yee

Hi All,
Is there any other second opinion related to this issue before I close the question?
Thanks
David Yee

InfoPackages Missing in Project Systems Business Content

Hi all,
Just installed PS business content in a BW 3.5 system. Cubes, ODS's, etc are all OK. But should there be InfoPackages supplied?
Thanks!
Gerry.

Gerry
Welcome To SDN
Usually we will create our own info Packages based on our requirements like what cubes or ODS it should load also it is Delta/init/full. All these settings could be done in our info Packages based on our requirements.
Hope this helps
Thnaks
sat

Report on PCA: Transaction Data (0PCA_C01) (Business Content)

Hi,
I am using a business content cube 0PCA_C01 and a report (Business Content) Plan/Actual/Variance.
But i need to have info on on Profit CenterCost center and cost element.As the cube is business content,only profit center info is loading now.How can I load Cost center and Cost element data.
My question is
1) From where I can (In which tables) pick the data from to modify the data source
2) As the data source is based on view (ISPCACST),How can I check on which tables this view is developed.
Thanks

depends which datasource you are feeding the data with
If you are using 0EC_PCA_3 then you are doing it via the GLPCA table and a timestamp extarctor
If you are doign it via the 0EC_PCA_1 in FULL load then you are doing it via the totals tabel GLPCT
If you are oding it via the 0EC_PCA_1 in delt amode you are actually doing it from GLPCA line items posted to the delta queue in RSA3 that looks the same as the GLPCT table (ie its aggregated in the delta queue)
In your installation does cost centre = profit centre and does GL account = cost eleemtn
If they do just add these to the cube and map them from the base data so profit centre in cube gets loaded from profit centre and cost centre in cube gets loaded from cost centre
Else - then you are in trouble as you dont have the cost centre information on PCA - thats what CCa is for
An FI document can create a PCA and a CCA document
A CCA document does not have to exist in PCA or FI (secondary cost postings)
The reference doc number in PCA dn CCA can be used to poitn to the original FI document - thats where the link is
If you dont use secondary cost postings - and the profit and cost centres are different why not build a cube of the GL4 datasource? All the data is in there - cost and profit centre

Financial statement planning / Investment planning business content

Dear all,
Has anyone actually been able to make any of the standard business content for these areas work? The content has been there for 6 years but still creates innumerable headaches. I have managed to install the BC for e.g. financial statement planning based on cube 0SEM_C06. I then loaded the data using program UPB_DATA_IMPORT. This unfortunately was not sufficient for the majority of folders to work as the BC data provided did not cover the majority of infoobjects and contained none of the necessary hierarchies. I worked through the optios entries and generated the MD and hierarchies manually (though of course I have none of the texts or attribute information). Despite doing all this I still find some of the functions do not work. There are short dumps e.g. where it searches for planning functions that do not exist in UPF_PLNTP.
I see no notes on these problems, no SDN forums suggesting other people have run into these problems. We are BW 2004S patch 9 so I can't believe it is a patch problem.
Have I missed something in the ATS are which affects the set up of the master data and the available functions?
I would be very grateful for any comments of success stories or otherwise.
Many thanks
Heidi.

Hi Andrew,
Thanks for coming back to me.
We are not really intending to run using business content but want to activate it to use it as a guide on which to base our development. What I am staggered by is how difficult it has been to make it work. What I am wondering is: Are we having these problems because our system started off as a 1.2B BW system that has been upgraded all the way to 2004s? Are we missing table entries that we would have if we had started our BW system as a V 3.5 for example? If another implementation has activated all the BC without problems I will go back to OSS and ask them to provide the missing entries. If everyone has had the same problems I will soldier on.
Thanks
Heidi

How to find information from a field in R3 to get it in Business Content

Hi all, my case is this:
i want to learn how to get or struct a model in BW, for example, my task is make a query where the client wanna get information , and he told me the fields, ok, in R3 i got the name of the field (NODISCONCT), the struct (EANLD), and others fields more, ok, now i have to activate the data model to load this fields in InfoObjects, thats the problem, i dont know how make my model and find it in Business content, i was looking for in http://help.sap.com but i couldnt find it, but i want to learn more how to do it, and the best way to do this task, help me guys, i know this is a very important step that i must learn very well to make my carrer in BW, i ll really apreciate it !
Thanks !

Hi,
see suppose i can give you one example.
http://help.sap.com/saphelp_nw70/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
from this link you get idea about fi-ar and fi-ap
client will give you that these are the field i want . for this report. From report you can get idea
What is on it . Here you need to think you want to go top down or bottom up.
bottom up - you need to check with data source. then this datasource is related cube or dso and then report
just play with help.sap.com in bi content you will get idea

Business Content Loads

Similar Messages

Maybe you are looking for