Business functions in SAP Upgrade

Good afternoon
Uncomfortable asking them for their support
we are conducting tests to migration to V5 V6 technique in SAP, but we wanted to make
some validation to determine whether to migrate functional features are enabled only business we want to activate and validate these improvements and new screens and fields, but when doing so, we see that there is some functions were fitted but failed to see nothing else, know whether it is also necessary to activate the desired business function is further supplemented by some configuration?
thank you hopefully someone can support me
good morning

Hi,
In order to understand impact of activating business like which all transactions will be effected or what new config is delivered, you can generate impact analyzer report for different business function on link http://service.sap.com/erp-ehp.
Thanks
Sunny

Similar Messages

  • Real time business functionality using SAP Xi and hardware included????

    Hi All,
    I am quite new to sap-xi. i have practised some of the scenarios that can be done with xi.
    I was just trying to visualise some of the real time business requirements where SAP XI is used.
    For example
    Some may have used Sap XI to transform data between file server and SAP system or may a web serve asking for details from sap system to display datas or some times sap xi systems sits betweem an integration server (like biztalk etc) and sap system.
    Can anyone of you can give me some of the real time requirements you have dealt with over the years
    in terms of business functionality and servers involved in the whole system?
    Thanks
    Rakesh

    Hi
    Various scenario's:
    FILE-FILE
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
    XML to PDF
    /people/divya.vidyanandanprabhu/blog/2005/06/28/converting-xml-to-pdf-using-xi
    Work with BPM
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    File to IDOC
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    E-mail alerts in XI-CCMS
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    RFC using BPM
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    HTTP to RFC
    /people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
    IDOC to JMS
    /people/saravanakumar.kuppusamy2/blog/2007/09/26/an-approach-to-handle-total-record-counts-in-idoc-to-jms-scenarios
    /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
    Pls : Reward points if helpful
    Thanks
    Vishal

  • How to activate Business Functions in SAP.

    Hi ,
    I want to activate business fucntion LOG_MM_CI_2 related with MM bapi. I found that, we can activate any business function by using transaction code SFW5 . But i can not find the above business function in this transcation code.
    I am using ECC 6.0 support package SAPKA70006.
    Note: (Please let me know, the right forum if this is not the right forum to discuss this question).
    Regards
    PG

    Hi,
    Your requested functionality is delivered in EHP 2 & 3 . So as suggested you need to install ehp3 or EHP4 on your server.
    Regards,
    Vamshi.

  • New GL functionality in SAP Upgradation in Asset Accounting

    Hi Team,
    My client is using 4.7EE version they want to upgrade system with ECC6.0. But there is a problem with Depreciation areas. There business is there in multiple countries. Globally they want leading ledger and locally they want non leading ledger. we can define ledgers but how about the affect of ledgers in depreciation areas. do i need to create new depreciation areas or can i assign ledgers in same depreciation areas. If i go with existed one what are all the issues will come. can u pls help me to overcome this issue.
    Regards,
    Nagaraju.
    Edited by: Nagaraju Chagonda on Nov 8, 2011 7:13 AM

    Hi Nagaraju,
    A example of a typical dep.area setting for a parallel ledger at you is like:       
    ..................Real.......... Posting to G/L............Ledger                        
    Area 01........X........................1.........................0L                           
    Area 15........X........................3.........................TL (your ledger code)        
    Area 16..................................6.........................TL (your ledger code)
    regards Bernhard

  • Business Functions in SAP Business Suite Foundation - Business Functions (SAP Enhancement Package 5 for SAP ERP 6.0) - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    Hello,
    I tested 2 changes :
    - put entries for wdf.sap.corp in my local hosts file
    - put entries for dummy.nodomain + adjust /etc/resolv.conf
    System start is OK, but access to dbacockpit is still behaving weird.
    The html version fails at the start -
    Impossible to connect to the URL http://vhcalabaci.dummy.nodomain:0/sap/bc/webdynpro/sap/dba_cockpit?<etx>. The server responded with: Can't assign requested address.
    i can go into the sapgui interface for DB02 but most of the interesting menu options are greyed out - so I can't retrieve the info.
    In some of the screens in DB02 I find reference to a server wdflbmd16124 - a DB test connection to this server fails (of course). Tried to enter this name asa alias in the hosts file but that did not solve this issue. On the other hand, abaadm seems to have the correct environment info for the local ASE (since the database starts). Looks some config settings between user env and gui are not in sync.
    But I miss ASE skills to figure out where I need to correct this.
    Mixed feelings about this installation - it looks like the application part will work - but having this confusing setup might still give surprises at later stages.
    So I hope your team works on a clean version of this image and will deploy is soon.
    Regards
    Frank

  • Intellectual Property Management - Business Functions for SAP Customer Relationship Management - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    Hi,
    It is a CRM Addon: Desktop Connection for SAP CRM – SAP Help Portal Page
    Best Regards,
    Sigrid

  • Utilities - Business Functions for SAP Customer Relationship Management - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    Hi,
    It is a CRM Addon: Desktop Connection for SAP CRM – SAP Help Portal Page
    Best Regards,
    Sigrid

  • ESS activate business function

    Hi,
    our customer want to use webdynpro abap and activate the ESS business function. Does anyone have experience if this is activated, will this affect their java iViews?
    And if so, what are the risks on standard ess scenarios (maintenance on personnel information in masterdata)?
    Thank you!
    Kind regards,
    Hilde Bakkemyr

    Yes if you activate ABAP WD switches you ll be using the new WD ABAP
    For using new WD ABAP-based ESS you need to install SAP Business Suite 7
    Innovations 2010 (EA-HR 605) and activate business function
    HCM_ESS_WDA_1. You can find a description of the business function in
    SAP Library for SAP ERP for SAP enhancement package 5 on SAP Help Portal
    at http://help.sap.com/erp -> Business Functions (SAP Enhancement
    Package 5 for SAP ERP 6.0) -> Enterprise Business Functions -> Human
    Capital Management -> HCM, ESS on Web Dynpro ABAP.
    read the SAP Note No. 1450179
    http://help.sap.com/erp2005_ehp_05/helpdata/en/25/340b0507434193adbfe3f8fc8896c7/frameset.htm

  • Query on Enhancement Pack Upgrade/ Installation-Business Functions install

    I am working on an Enhancement Pack Upgrade. I have the following questions from the Client, can you please help answer u2013
    Scenario u2013 Upgrade from ECC 6.0 to ECC 6.0 EhP4
    1 Using Business Function Prediction service, assume SAP recommends 10 Business functions to be installed. We install the 10 business functions and after 6 months the client realizes that there are some more functions which will help business.
    a.What does it take to install the additional business functions.
    b.Do we have to do the entire EhP4 Upgrade again
    c.If we have to do the entire EhP4 Upgrade again what happens to the initially installed business functions, will that be overwritten
    d.What will be the additional SPDD and SPAU effort to activate the additional business functions, will that be same as the initial SPDD/ SPAU effort.
    2 Can we install all the Business functions available in EhP4. What happens if we install all the business functions. What will be the additional effort or overhead in terms of hardware, database, ABAP effortu2026..?
    Thanks in advance.

    Hi,
    1. For installing additional business functions you need to again run the whole EHPI process. But what I feel is even you install more than 1 business function you will be able to activate only 1 business function per system.
    2. The initially installed business functions would not go anywhere. You need to select them in your solman before the stack.xml file generation.
    3. SPAU/SPDD effforts depends on your system. So no comments.
    4. If you plan to install all business functions then you will need good amount of DB space and your upgrade downtime would be high.
    Regards,
    Nirmal.K

  • How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1?

    SAP Business One 9.1 is about to release in this year with many feature enhancements in various areas, such as in Business Logic and Localization, Reporting and Analytics, Lifecycle Management and Support, SDK Features for extensibility, Infrastructure and Architecture, etc. , with this upgrade every organization using SAP Business One is also expecting that some previous System Crash problems associated with SAP Business One 8.8 or 9.0, will also be resolved with the advent of 9.1.
    But until 9.1 is available in GA, we have to know and follow some procedures to avoid this situation. Through this blog we have addressed ‘How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1’. In below link you can have a look that what common system crash issues been reported and what solution given by the community members:
    common system crashes in SAP Business One

    Hi,
    Thanks for sharing valuable information with us. You may repost this discussion as "Document" or Blog type.
    Thanks & Regards,
    Nagarajan

  • Role of Time Mgmt functional consultant during SAP Upgrade from 4.7 to ECC6

    Hi,
    Could anyone explain the role of a time management functional consultant during SAP upgrade from R/3 4.7 to ECC6.0. Please provide me if you got any documentation.
    Thanks,
    Sunny

    "After you upgrade to SAP ERP 6.0, you can enhance the functionality of your application without performing a further
    upgrade thanks to a new deployment technology u2013 the SAP enhancement package for SAP ERP. The enhancement
    packages simplify the way you manage and deploy new software functions for SAP ERP." - that is the real benefit of ECC 6.0
    There aren't any major changes to PTM functionalities from 4.7 to 6.0. I hope your system is already using IT 2006 instead of IT 0005. Under functional role, you are required to configure/test any functional upgrade and manage data.
    Regards
    Yash

  • SAP Business Systems Analyst w/L&D business function experience $90-120/hr!

    Our prominent Orange County client is aggressively seeking a SAP Business Systems Analyst! This is a contract position and is located at their Irvine office. This company is privately held and extremely stable. They have built upon a solid foundation of values, including a focus on the long term and emphasis on quality. They are growing rapidly with a very advanced IT shop. They have many popular bleeding edge technologies and methods, and are looking for individuals with deep knowledge and experience in leadership and management that can help them lead effective IT project teams. Our client's IT Department has over 1000 employees and is growing. They widely use RUP, UML, ITIL and Waterfall methodologies so it is a plus if you are familiar with them.
    Below is the job description for the position. Please review and if you are interested, please contact Susan Ashman (susan.ashman @ zebra-net.com) at 949-910-9800 or 949/900-6110 we will be happy to tell you who our client is and begin the interview process for you.
    Required skills:
    Thorough knowledge of System analysis and functional design
    General knowledge of:
    u2022 The securities/mutual fund industry (terminology, procedures and regulations) with thorough knowledge in some specific areas
    u2022 Software development and implementation
    u2022 Structured programming techniques
    u2022 Data modeling and database design
    u2022 User interface principles and windows design standards
    u2022 System design documentation
    u2022 Documentation and training
    u2022 Project planning and estimation
    u2022 Application Architectures
    Basic knowledge of:
    u2022 Project Management
    Must have Technical Skills:
     Three (3) yearsu2019 experience as a SAP BSA with focus on L&D business function
     SAP ECC 6.0 LSO602 working module experience
     Experience supporting SAP LSO in a functional capacity
     Implementation/project experience would be a plus
     Working knowledge of waterfall SDLC practices
     Ability to follow step by step instructions independently and assist business user in troubleshooting production issues
     Ability to analyze business issue/defect, document findings and resolution with an ability to estimate effort to correct
     Understanding of SAP LSO practices and procedures, with an ability to understand the need to escalate to SAP when necessary
    Must have general skills:
     Need business systems support for a daily activities relating to support of SAP LSO ECC 6.0. This includes different delivery methods especially eLearning and Virtual classroom which are currently the most heavily used
     Serve as the primary liaison between the business requirement and the technical teams
     Provide daily production support to training organizations
     Perform SAP confirmation as it related to enhancements to existing SAP LSP operation
     Ability to manage enhancement, defect or data maintenance requests through implementation lifecycle
     Documentation related to enhancement, defect or data maintenance implementations
     SAP resource has end-to-end practical not conceptual experience in the use of SAP LSO and SAP portal and SAP Authoring Environment

    maybe OP want to extract all numbers from his inbox using regular expressions?

  • SAP Upgrade - Standard function modules & modifications

    Hello everybody,
    we are doing a SAP Upgrade to SAP ERP 6.0 and I need your help
    Some SAP standard funcion modules were modified in the last years and some weeks ago the changes were undone. The last version of the function modules are the same than the original function modules, but the version manager shows that the last version belongs to the user FGZ583 (and not SAP).
    The Problem is, that SAP deals with that function modules as a modification (because the last change was done by FGZ583?), but they are identical to the original SAP function modules.
    When the Upgrade is done, the SPAU/SPDD/se95 show that function modules as "modifications", although they are the same that the original ones.
    What could I do to avoid that SAP deals with that function modules as modifications?
    Cheers
    Prashad

    Hello Prashad,
    Its standard that once the object is changed the corresponding entry is recorded in different tables.Even if you roll back now system will treat as the modifications because corresponding change entries are present in the tables. You can try to activate the older versions but i don't think this will help you.
    This is not a point of worry as in SPDD adn SPAU you can choose reset to original for all those objects.
    Even if you can get those objects to move back to the source version they will get back to the standard in the new release.So my advise will be to let your upgrade run and then reset these objects to original.
    Regards
    Niraj

  • Business continuity during planned SAP upgrades

    What techniques are SAP customers employing to accommodate SAP upgrades and at the same time ensure 24/7/365 business continuity?
    Thanks for sharing your experiences.
    Fred

    Hi Fred,
    have you checked out the nZDM capabilities offered by SUM (details see here)? Additionally, you can find a good summary in this solution brief, where all other possibilities are summarized.
    Hope this helps.
    Bernhard

  • Business functions to be activated after EHP4 upgrade

    Hi All,
    I have recently upgraded ECC 6.0 to EHP4.The following technical usages were selected during download.
    Financial Services,Financial Supply Chain Management and Financials.
    Please let me know what all business functions that are to be activasted.
    Do I have to activate business functions for EHP2 and EHP3 as well.Below are the BFs for our usage types.
    Business Function                           Technical Usage                         EHP
    /IBS/EAFS_RBD_BUSOPR                           Financial Services                          4
    EAFS_BCA_BUSOPR                           Financial Services                          4
    EAFS_CML_LOANS_POOLING                Financial Services                          4
    FICAX_BILL_INVOICING                           Financials                                                4
    FICAX_CI_1                                                Financials                                                2
    FICAX_CI_2                                                Financials                                        4
    FIN_FSCM_CCD_INTEGRATION               Financial Supply Chain Mgmt     4
    FIN_FSCM_INTEGRATION                           Financial Supply Chain Mgmnt     2
    FIN_TRM_CORR_FW                           Financial Services          4
    FIN_TRM_INS_HM                           Financial Services          4
    FIN_TRM_LR_FI_AN                           Financial Services          3
    FIN_TRM_LR_FI_AN_2                           Financial Services          4
    FIN_TRM_PSM_INTEGRATION      Financial Services          4
    INS_FSSR_CI_1                           Financial Services          3
    INS_FSSR_CI_2                           Financial Services          4
    INS_FSSR_I18N                           Financial Services          4
    Out of the above FICAX_BILL_INVOICING,FICAX_CI_2,FIN_FSCM_CCD_INTEGRATION,FIN_TRM_INS_HM and FIN_TRM_LR_FI_AN_2 have dependencies like X_CONT or BI_CONT which are not installed on the system.
    I guess I can't activate these business functions.Am I right?
    And I read that only one BF set is activated per one system.I did not find any BF set related to Finance in the drop down list of SFW5 in the system.Please enlighten me on this topic.
    Regards,
    Dinakar
    Edited by: mutnuru dinakar on Mar 8, 2011 1:44 PM

    > Thanks for your reply,as I mentioned the list of BFs are applicable for the 3 technical usages I  had selected during EHP4 upgrade.I need to select out of them.
    I understand your question - however, how should anyone else but you know whether you need the functionality behind them? This is a business decision.
    I suggest you use the documentation (press on the corresponding "i" in SFW5) to see if the business requires the functionality. If yes, enable it, if not, you don't need to enable it.
    Some of those BFs will need a BW/BI to work. You have to decide, whether you need them or not.
    Markus

Maybe you are looking for