Business Process For pharma industry

hi,
can u pls tell me about business process for pharma industry.
regards
Guru

Hi,
the best place to get an intial overview of the pharma business processes is to look at the solution map. This can be found here: http://www.sap.com/industries/lifesciences/index.epx . On the right there is an area called "SAP Business Maps for Life Sciences".
I hope this helps.
Oliver

Similar Messages

  • Business Process for Paper Industry

    Dear all
       I have done a business process study for a paper industry.Where they have different varieties of paper which has different variants GSM,BF- Bursting Factor,Shade & Width.
      Generally the customer orders are grouped to match the Dekle size(Paper Width) and the manufacturing program is designed manually according to the width of the paper.After production the goods are despatched to corresponding customers.
    They have a power plant to produce Power & by product steam .The Power generated is used for home consumption as well as they do sell the power.
    Can anybody suggest me a good process to map the power plant and Paper plant.
    Expecting your suggestions for Planning the manufacturing according to width wise and production execution for different customer orders.
    Jay
    Edited by: Jay Shankar.A on Apr 18, 2008 8:09 AM

    Hi,
    For the Paper Industry, IS-Mill will be best suited.
    All your Scenarios will be covered with this.
    Depending upon your Width: You can combile your Sales Order/Production Orders (Order Combination)
    The Big Bundle of PAper which you get at the end of the process you can have the Original Batch concept.
    Your settlement will be as per your Sales Order quantity.
    For better understanding of the processes refer below link:
    http://help.sap.com/saphelp_dimp50/helpdata/EN/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
    Hope this helps..
    Regards,
    Siva

  • Business Process for Cement Industry

    Hello all,
    I am an Indonesia
    I am new to SAP
    I just graduated from college, now I work in a cement company
    The company uses SAP, I was placed in the department of business processes
    Without going through the training process, I was asked to understand the business processes in SAP that they use. They gave me access to the development server.
    But it's still hard for me to understand the business process.
    Can anyone help me? from where I had to start
    I apologize if any mistakes...
    Thanks..

    Hi
    That is ot correct to udnerstand the business process from SAP. it is difficult.
    your company needs to provide the existing Business Process scenarios and how are they mapped to SAP with all scenarios documentation. Then, it would become easy for understand and digest and take care of issues.
    Thanks,
    JK

  • Business Process Of Steel Industry

    Hi Gurus,
                 Could any one explain me th Business Process of Steel Industry in detail please.
                  I will award points.
    With Regards
    Saeed Arif

    hi,
    The process will be:
    If you want the material you wanna get from the vendor for the manufacting of the steel, then you can go for RFQ(request for quotations)...based on the Bids you can choose the vendor and then make the PO for the raw material...
    The material which you want to procure shd have the MMR(Material master record) and for the vendor(Vendor master record)...
    If you don't wanna go for the RFQ, then can also directly make a PR(Purchase requisition) and based on it you can make th PO...
    Now After the PO, you can get the material and then you do goods receipt and then you pay to vendor via MIRO Invoice receipt...
    This is a simple procurement process...
    There could be few scnerios for the getting the finished product from the subcontractor and giving him the semi-fininshed productor...
    SO here you use the subcontracting process also in the steel industry...
    As the steel industry is a big industry and all the process can't compleated in the single location...SO for this you use the stock transfer/transfer posting scnerios...
    For daily material req., instead of making the different Po via han, use can use the MRP process by which you can directly generate the PR//PO doc as per requirement get generated for the material...
    like this there are n number of process which can be used in the steel industry also...
    Regards
    Priyanka.P

  • PI sheet for pharma industry - step by step customization required very urg

    Hi,
    We are implementing sap PP-PI for pharma industry.Can some one please send some good document explaining the customization for PI sheet , custom pi sheet .
    any help is gretaly appreciated.
    sonia

    Hi,
    Please check with following Baseline Buliding Block link provided  by SAP. Here u can select industry type and contry type.
    <b>http://help.sap.com/bp_blv1470/BL_UK/index.htm</b>
    i hope this will help.
    regards
    pardeep

  • Solution Directory - How to lock a business process for a implement project

    We have Solution Directory assigned to a maintenance project and I understand the checkout/checkin process and how it locks the business process in the Solution.   What is the best practice when  you are starting a new IMPLEMENTATION project that will impact existing business processes that are in the Solution?  I know that I can copy from the solution to build the new project, but it doesnu2019t lock the BP from the solution.  
    I have a new Implementation project, that i want to checkout/pull existing business processes for the Solution Directory. 
    *How can these Business Processes be "locked" in Solution Directory as they are with a Maintenance project?*

    Kelly,
    You would use the maintenance project to make daily modifications.
    Consider the case of a O2C business scenario. You need to almost make daily configs etc, which get pushed through, such things will go into a maintenance project.
    But if you plan to enhance O2C with a CRM front end or include a better planning solution or TPM or something, then you are looking at an implementation project.
    Rule of thumb. Short Scale changes : Maintenance Project, Long term/major enhancements : Implementation Projects.
    Also In this case to speak about the lock down. Well the Solution Directory kind of takes care of that for you.
    I am assuming that you have a solution populated with business processes. So now if you want to enhance it with a new functionality, you would use an implementation project. So when you define the implementation project, and then navigate to Solar01, and try to add business scenarios , ensure that on the Structure tab you select the Solution as the source. This ensures you are copying content from your current, updated, productive solution. Once you do that, the implementation continues on its track, whilst daily support processes are managed with the check-in / check-out functionality of the Solution and the Maintenance Project.
    You technically do not need to lock the business processes down, since the Compare and Adjust functionality of a solution will help you identify the deltas  between the Solution and the implementation project and you can always make those adjustments post go-live and thus just update the Solution at one shot. Also remember that with SolMan 7.1 the Compare and Adjust functions can be used with Template, Implementation and Solutions in any permutation-combination.
    Hope this helps.
    Plz let me know if you need any additional information
    Cheers!!

  • BUSINESS PROCESS FOR TYRE INDUSTRIES

    WHAT IS THE BUSINESS PROCESS FOR TYRE INDUSTRIES....
       PLZ ANSWER ME ASAP......

    Hi..
    Tyre industries business processes are same as a manufacturing industries..............
    Like Export Sales, Local Sales, Scrap Sales and Stock Transfer etc.
    If you have any specific problem then let me know
    Regards,
    Ratish

  • Order Related Intercompany business process for Service material

    Hi
    I am looking for some info on Intercompany Business Process for service material - Order related.
    I have created Sales order (ZBOR) copied from standard sales order (TA / OR), a billing document (ZIVA) copied from IVA, an item category (ZTAD) copied from TAD standard.
    A material type used is DIEN (Services).
    Note 63459 indicated that I have to use a copy requirement 613 for item category ZTAD. The copy requirement 613 was created by copying requirement 013 according to the attached reference.
    I did the same according to the note. When I tried to create first billing document i.e. to end customer, its fine.
    When I create second billing document i.e. intercompany billing, its going to first pricing procedure and end customer as Payee, which should not happen. Rather it should go to intercompany pricing procedure (ICAA01) and to Internal customer as payee.
    Can someone guide me how to solve this issue?

    when i run intercompany billing (ZIVA), it goes to copy control routines 613 , buts its picking end customer pricing procedure and payee as end customer , not picking intercompany pricing procedure and internal customer as Payee.
    I am not sure what to do with 613 routinees as suggested by OSS note. All is i created this 613 copying from 13.
    Do i need to develop the logic of picking correct intercompany pricing procedure i.e ICAA01 , and need to get the right payee and some header information in this 613 routine . which means automatic pricing procedure determination is not done using customization in Order related Intercompany billing . Am i right to understand?
    Please suggest me how do i solve this issue.
    Please send it to my [email protected] email too.

  • Business process for Plant Maintainence?

    Hi ,
            Can anyone tell me Business process for Plant Maintainence?and important tables and transaction codes?
    Thanks & reagards,
    Gopi.

    You can find all the details here
    http://www.sap-img.com/sap-pm.htm
    Regards,
    Ravi
    Note : Please mark all the helpful answers

  • "Cleaning Validation Process Scenario" in SAP QM/PM for Pharma Industry

    Dear Gurus,
    I have a client requirement in the Pharma Industry. The scenario needs to be mapped in SAP for which I need your help.
    The scenario is that the company is making medicines (tablets/capsules). Whenever, there is a changeover of the product, there are certain regulatory requirements which the client needs to adhere to.
    For example, a shutdown of machinery for 10-12 days may be planned during which the machines are cleaned with soap/cleaning agents. Now, during this cleaning process, the QA department would take samples of the soap water recovered after cleaning process. These samples would be inspected for residues of the previous product that was being run on the line.
    If everything is ok, then the approval is given by QA to start the next product.
    This process has to be mapped in SAP, maybe in QM or PM.
    I thought over the following process. Please let me know your inputs to fine tune the below process -
    1. As the shutdown for changeover will be a planned one, we can create a Maintenance Plan in IP42.
    2. Schedule the Mantenance Plan by IP10.
    3. Release the maintenance plan in IP10.
    4. Preventive Maintenance order will be created. (Also assign an Inspection Type in config to this maintenance order so that inspection lot also is triggered. The doubt here is that the inspection lot would be triggered for all preventive maintenance orders which may not be required. How to control this?)
    5. Carry out Result Recording in QA32.
    6. Confirm Preventive Maintenance order in IW41.
    7. Carry out Usage Decision in QA32. The status of order will now become TECO.
    8. Order Settlement in KO88.
    9. Business Completion of Order in IW32
    Thanks for you time!
    Regards,
    Nitin

    Your ASIS Process 
    1. Cleaning is done by maintenance before change over
    2. Inspection is done to ensure that cleaning is acceptable
    3. Records of inspection are to be maintained
    4. Information is to be sent to concern regarding  quality testing  and its status
    5. Change over performed
    You can MAP this by Notifications also. Follow the steps
    1. Create a new notification type ( config)
    2. Ensure you have following mapped in the action box (config)
        a. Send a mail
        b. Create a inspection lot
        c. Create a QM order
        d. Close Notification
    The process will be as follows
    1. Create a dummy material and activate insp type 08 in the QM set up.
    2. PM creates the notification (t-code QM01) (New notification & triggers a mail (Action box) which is delivered to QC as information regarding the start of process .
    3. QC on looking at the information creates the inspection lot through the notification (action box) the QTY specified in the notification is moved from unrestricted to Quality .
    3. Perform  RR & UD and post stock  to unrestricted
    4. Close the notification giving your remarks or set the notification for further processing if required .
    Note :
    1. The material is a dummy material
    2. The intial stock can be one qty which is posted to quality -
    from unrestricted and then again to unrestricted.
    Deepak

  • "Cleaning Validation Process Scenario" in SAP PM/QM for Pharma Industry

    Dear Gurus,
    I have a client requirement in the Pharma Industry. The scenario needs to be mapped in SAP for which I need your help.
    The scenario is that the company is making medicines (tablets/capsules). Whenever, there is a changeover of the product, there are certain regulatory requirements which the client needs to adhere to.
    For example, a shutdown of machinery for 10-12 days may be planned during which the machines are cleaned with soap/cleaning agents. Now, during this cleaning process, the QA department would take samples of the soap water recovered after cleaning process. These samples would be inspected for residues of the previous product that was being run on the line.
    If everything is ok, then the approval is given by QA to start the next product.
    This process has to be mapped in SAP, maybe in PM or QM.
    I thought over the following process. Please let me know your inputs to fine tune the below process -
    1. As the shutdown for changeover will be a planned one, we can create a Maintenance Plan in IP42.
    2. Schedule the Mantenance Plan by IP10.
    3. Release the maintenance plan in IP10.
    4. Preventive Maintenance order will be created. (Also assign an Inspection Type in config to this maintenance order so that inspection lot also is triggered. The doubt here is that the inspection lot would be triggered for all preventive maintenance orders which may not be required. How to control this?)
    5. Carry out Result Recording in QA32.
    6. Confirm Preventive Maintenance order in IW41.
    7. Carry out Usage Decision in QA32. The status of order will now become TECO.
    8. Order Settlement in KO88.
    9. Business Completion of Order in IW32
    Thanks for you time!
    Regards,
    Nitin

    Hi,
    For multiple samples we can use no of sample(SAmpling Procedure) to record more than one results and system will calculate the arithmetic mean of all results of all sample
    For this we have to maintain control indicator of MIC . Single result radio button will enable us to record results based on the number of sample defined in sampling procedure
    And if you have requirement like different target values at different level,
    Then you can configure inpection point -
    SPRO > Quality Management > Quality Planning > Inspection Planning > General > Define Identifier for Inspection Points
    in this Field act - 2 and give description
    Regards,
    SandeepV

  • Business Process for Casting Iron industry

    Hi All,
    We are going for a implementation for a casting iron industry... can you please let me know what will be the business process required for such industry.
    Thanking you all in advance
    Rgds
    Toshniwal

    Hi there,
    The BUSINESS process should be determined and explained by the business - this is the purpose of the blueprint.
    In the blueprint phase you will build-up an inventory of all the business processes from your client (AS-IS) you can then map them to SAP processes and these become the TO-BE processes.
    As to perhaps SAP solution, your project manager should know what industry solution (if any) is being implemented.
    I would imagine that for this industry you would implement FI, CO-PA, PP, MM and SD - at least.

  • SRM 7.0 for Pharma industry

    Hi,
    We plan to implement SRM 7.0 for a pharma industry. Will all the FDA compliances be met in the SRM system or do we need to handle it by some customisation?
    Regards

    Hi,
    As SRM 7.0 is part of the Business Suite the FDA compliance assessments are detailed here:
    U.S. Food and Drug Administration (FDA) Title 21 Code of Federal Regulations (CFR) Part 11 [original link is broken]
    Hope this helps.
    Regards,
    Jason

  • Two way Asynchronous business process for Webservice to JDBC scenario

    Hi Experts,
    For the webservice to JDBC scenario, I have to use two way Asynchronous business process. Is it possible?
    Scenario : Webservice to JDBC -> Async Call
    JDBC to Webservice -> Async Call
    I have already done with two way Synchronous. Here I would like to know about only Async call. Please provide your suggestions.
    Is it recommended to use Async call when we have Synchronous option?
    For the above requirement I have to create two separate services and in BPM, I have to call one by one..Is it correct?
    Regards
    Sara
    Edited by: Sara D on Dec 18, 2007 8:05 AM

    hi sara,
    yes it is possible.
    In receiver channel JDBC we have a special parameter "Exactly Once Handling " which is to assure async incoming data to be written only once to avoid redundancy.
    Although Synchronous is "Best Effort" but it is considered to be "Worst Case". We can use Sync but try to use Async as much as possible to ensure system performance.
    Ques : For the above requirement I have to create two separate services and in BPM, I have to call one by one..Is it correct?
    yup you have to create two services and you are following right path but this scenario should be in two steps seperately.
    Rergards,
    Mandeep Virk

  • Business Requirement for Pharma manufacturing Company

    Hi all,
    My client is Pharma manufacturing company.
    can any one through some light on the business requirement for any Pharma manufacturing company
    Which type of the scenarios can take place in this sector and the business purpose
    please share your thoughts
    Regards
    Suman

    hi suman,
    plz see if this helps you:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e17fdb90-0201-0010-2cb6-fe937f3bfd97
    if you have a closer look, i feel some of the examples described here will be used in pharma domain as well.
    thanks,
    latika.

Maybe you are looking for