PI sheet for pharma industry - step by step customization required very urg

Hi,
We are implementing sap PP-PI for pharma industry.Can some one please send some good document explaining the customization for PI sheet , custom pi sheet .
any help is gretaly appreciated.
sonia

Hi,
Please check with following Baseline Buliding Block link provided  by SAP. Here u can select industry type and contry type.
<b>http://help.sap.com/bp_blv1470/BL_UK/index.htm</b>
i hope this will help.
regards
pardeep

Similar Messages

  • Business Process For pharma industry

    hi,
    can u pls tell me about business process for pharma industry.
    regards
    Guru

    Hi,
    the best place to get an intial overview of the pharma business processes is to look at the solution map. This can be found here: http://www.sap.com/industries/lifesciences/index.epx . On the right there is an area called "SAP Business Maps for Life Sciences".
    I hope this helps.
    Oliver

  • "Cleaning Validation Process Scenario" in SAP QM/PM for Pharma Industry

    Dear Gurus,
    I have a client requirement in the Pharma Industry. The scenario needs to be mapped in SAP for which I need your help.
    The scenario is that the company is making medicines (tablets/capsules). Whenever, there is a changeover of the product, there are certain regulatory requirements which the client needs to adhere to.
    For example, a shutdown of machinery for 10-12 days may be planned during which the machines are cleaned with soap/cleaning agents. Now, during this cleaning process, the QA department would take samples of the soap water recovered after cleaning process. These samples would be inspected for residues of the previous product that was being run on the line.
    If everything is ok, then the approval is given by QA to start the next product.
    This process has to be mapped in SAP, maybe in QM or PM.
    I thought over the following process. Please let me know your inputs to fine tune the below process -
    1. As the shutdown for changeover will be a planned one, we can create a Maintenance Plan in IP42.
    2. Schedule the Mantenance Plan by IP10.
    3. Release the maintenance plan in IP10.
    4. Preventive Maintenance order will be created. (Also assign an Inspection Type in config to this maintenance order so that inspection lot also is triggered. The doubt here is that the inspection lot would be triggered for all preventive maintenance orders which may not be required. How to control this?)
    5. Carry out Result Recording in QA32.
    6. Confirm Preventive Maintenance order in IW41.
    7. Carry out Usage Decision in QA32. The status of order will now become TECO.
    8. Order Settlement in KO88.
    9. Business Completion of Order in IW32
    Thanks for you time!
    Regards,
    Nitin

    Your ASIS Process 
    1. Cleaning is done by maintenance before change over
    2. Inspection is done to ensure that cleaning is acceptable
    3. Records of inspection are to be maintained
    4. Information is to be sent to concern regarding  quality testing  and its status
    5. Change over performed
    You can MAP this by Notifications also. Follow the steps
    1. Create a new notification type ( config)
    2. Ensure you have following mapped in the action box (config)
        a. Send a mail
        b. Create a inspection lot
        c. Create a QM order
        d. Close Notification
    The process will be as follows
    1. Create a dummy material and activate insp type 08 in the QM set up.
    2. PM creates the notification (t-code QM01) (New notification & triggers a mail (Action box) which is delivered to QC as information regarding the start of process .
    3. QC on looking at the information creates the inspection lot through the notification (action box) the QTY specified in the notification is moved from unrestricted to Quality .
    3. Perform  RR & UD and post stock  to unrestricted
    4. Close the notification giving your remarks or set the notification for further processing if required .
    Note :
    1. The material is a dummy material
    2. The intial stock can be one qty which is posted to quality -
    from unrestricted and then again to unrestricted.
    Deepak

  • "Cleaning Validation Process Scenario" in SAP PM/QM for Pharma Industry

    Dear Gurus,
    I have a client requirement in the Pharma Industry. The scenario needs to be mapped in SAP for which I need your help.
    The scenario is that the company is making medicines (tablets/capsules). Whenever, there is a changeover of the product, there are certain regulatory requirements which the client needs to adhere to.
    For example, a shutdown of machinery for 10-12 days may be planned during which the machines are cleaned with soap/cleaning agents. Now, during this cleaning process, the QA department would take samples of the soap water recovered after cleaning process. These samples would be inspected for residues of the previous product that was being run on the line.
    If everything is ok, then the approval is given by QA to start the next product.
    This process has to be mapped in SAP, maybe in PM or QM.
    I thought over the following process. Please let me know your inputs to fine tune the below process -
    1. As the shutdown for changeover will be a planned one, we can create a Maintenance Plan in IP42.
    2. Schedule the Mantenance Plan by IP10.
    3. Release the maintenance plan in IP10.
    4. Preventive Maintenance order will be created. (Also assign an Inspection Type in config to this maintenance order so that inspection lot also is triggered. The doubt here is that the inspection lot would be triggered for all preventive maintenance orders which may not be required. How to control this?)
    5. Carry out Result Recording in QA32.
    6. Confirm Preventive Maintenance order in IW41.
    7. Carry out Usage Decision in QA32. The status of order will now become TECO.
    8. Order Settlement in KO88.
    9. Business Completion of Order in IW32
    Thanks for you time!
    Regards,
    Nitin

    Hi,
    For multiple samples we can use no of sample(SAmpling Procedure) to record more than one results and system will calculate the arithmetic mean of all results of all sample
    For this we have to maintain control indicator of MIC . Single result radio button will enable us to record results based on the number of sample defined in sampling procedure
    And if you have requirement like different target values at different level,
    Then you can configure inpection point -
    SPRO > Quality Management > Quality Planning > Inspection Planning > General > Define Identifier for Inspection Points
    in this Field act - 2 and give description
    Regards,
    SandeepV

  • SRM 7.0 for Pharma industry

    Hi,
    We plan to implement SRM 7.0 for a pharma industry. Will all the FDA compliances be met in the SRM system or do we need to handle it by some customisation?
    Regards

    Hi,
    As SRM 7.0 is part of the Business Suite the FDA compliance assessments are detailed here:
    U.S. Food and Drug Administration (FDA) Title 21 Code of Federal Regulations (CFR) Part 11 [original link is broken]
    Hope this helps.
    Regards,
    Jason

  • Batch Managemnt for Pharma Industry

    Dear All Hi,
    I have the following scenario for material level batch management & all external numbering system & repeation of B/No., should not happen.
    1.All RM's will have a batch number assigned with manufacturing & expiry date, i.e. when GR is done then system should ask for B/No., manufacturing & expiry date & this data entry has to be mandatory
    2.For FG the B/No., is assigned at the time of process order creation/release & without this the process order should not allow to save order & .
    Also the requirment For manufacturing & expiry date for FG is MM/YYYY & by default system should diplay the manufacturing & expiry date while making GR by considering the confirmation date of process order as manufacturing & number days defined in material master as expiry date in non editable fields
    Please do tell me what settings in masters & SPRO that i should maintain to have this functionality working

    Hi
    answers for your issues :
    1.your Q:all external numbering system & repeation of B/No., should not happen.
    Ans: you can use user exit available in SPRO under the step
    Batch number assignment - Coordinate with your technical team.
    2.next Q:All RM's will have a batch number assigned with manufacturing & expiry date, i.e. when GR is done then system should ask for B/No., manufacturing & expiry date & this data entry has to be mandatory
    Ans: Batch number will be assigned wih the prior answer.
    Mfg & expiry date will be done by config setting:
    OMCV: for movement type 102 select option"2"
    3.Next Q For FG the B/No., is assigned at the time of process order creation/release & without this the process order should not allow to save order & .
    Ans In Material master MRP2  for filed Batch entry select either option"1" or "3" . this will give batch while releasing the order.
    4.QAlso the requirment For manufacturing & expiry date for FG is MM/YYYY & by default system should diplay the manufacturing & expiry date while making GR by considering the confirmation date of process order as manufacturing & number days defined in material master as expiry date in non editable fields
    AnsBy ans for q2 above the first part you will getmfg date expiry date .
    The fileds in the material master "number days defined in material master as expiry date in non editable fields"
    you can make in Tcode OMS9.
    Hope it will solve your requirement.
    Regards
    YMREDDY

  • Sales deals in pharma industry

    can somebody tell me what a Sales Deal  is?
    all i know is that there a corresponding Contract for every Sales deal that we have.
    sk

    Hi Ravi,
    Please go through the information provided by SAP Best Practices for Pharma Industry,if this suits your business process suits you may go ahead with this.
    [SAP Solution Map for Pharmaceuticals|http://help.sap.com/bp_pharmav1600/Pharma_US/HTML/solution_map_EN_US.htm]
    [Preconfigured Scenarios|http://help.sap.com/bp_pharmav1600/Pharma_US/HTML/preconfigured_scenarios_pharma_EN_US.htm]
    Please do let me know if you have any questions.
    Thanks and Regards,
    Naveen Dasari.

  • How to find Spool number for a 2 steps background job.

    Hi All,
    How to find spool number (and also the background job name ) for a 2 steps background job.
    in the table TBTCO i can see step numbers but i dont get the spool number. Is there any link between TBTCO and TSP01.
    Also after getting the spool number i need to drill down on ALV report. I hard coded the spool number and was able to drill down using BDC and call transaction but when i press back button it is not returning to the ALV report.
    Thanks,
    Shiva.

    Which one creates the spool? (first one I guess)
    What kind of spool? (WRITE, sapscript, smartform, pdf...)
    Do you use special statements like NEW-PAGE, or other things?
    Are you sure that the spools are generated by these jobs? (did you compare the spool generation times and job run dates to be sure...)

  • How do you add totaltime for all test steps in the report

    We are using xml reporting with the horizontal.xsl.  I see the totaltime property in the xml file.  I was able to un-comment some code in the stylesheet to display the module time for pass/fail steps.  I would prefer to see totaltime for every step.
    Alternative is to write some Labview code to extract test step name and associated times from the xml.
    Solved!
    Go to Solution.

    Hello
    If you can able to understand the Horizontal xsl, it is very easy to get show the available fields in the XML in the Report. Through LabVIEW also it is possible to extract the required
    Fields from the XML, you have to design an XML Parser  in the LabVIEW to
    parse the Step Name and it's time
    Attached code (a
    sample) can able to parse the Test Step Names, give the Report XML file
    Path as input, it will parse Step Names.
    What makes me unclear is, how can you use LabVIEW to show the total time?
    AshwiN,
    Attachments:
    Parse Test Results.zip ‏39 KB

  • No repeat option available for the process step in process chain

    If the process chain failed at the ODS activation level, generally the repeat option will be available for activation and to continue the next step. But in some cases the repeat option will not be available for the process step.
    Is there any process to get the repeat option in the process chain?

    You can change this in RSPC > Settings > Maintain process types > Loading (or process of your interest) > put the check mark for Repeatable.

  • Looking for Vendor evaluation steps

    HI All.
    Looking for venfor evaluation steps in sequence.
    Regards.
    Parameshwar
    Edited by: Csaba Szommer on Jul 5, 2011 7:51 AM

    May be of help
    [Vendor evaluation]
    [Vendor evaluation]
    [Re: vendor evaluation]
    Edited by: Karthik on Jul 5, 2011 1:28 PM

  • How to pass value for value field of return parameters for an action step in teststand sequence file programatically using c#

    I used a method LoadPrototypeFromMetaDataToken(token,options) to load the return type parameters. I am unable to set the value field in the return parameters for an action step in teststand sequence file programatically using C#.How can I do that.

    Continue here

  • Time Delay works for only one step

    HI
    I have a vi (not programmed by me but I was told to make few changes in it) in which there is a time delay. When I apply time delay it works for the first step and the delay doesnot work for the later steps. I tried to make few changes but it is effecting the other parts of the vi. I'm fairly new to Labview. Could someone please tell me what modifications do I need to do for the time delay to work perfectly. Thank you in advance
    Best Regards
    Pratheek
    Attachments:
    vi.zip ‏334 KB

    Jeff·Þ·Bohrer wrote:
    crossrulz wrote:
    Your Time.vi is set to be non-reentrant.  What this means is that only one instance of it can run at a time.  So if you call it twice, the first one will start running but the second call must wait until the first is complete before it can start.  To change the reentrancy, go to the VI Properties and then to the Execution section.  You want to choose "Shared Clone Reentrant Execution".
    Pre Allocated
    Get them their own data space so the local variable doesn't bang its head
    I knew somebody was going to say something there.  They really don't have their own data space that they need to maintain.  So it doesn't really matter which reentrant type they choose.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Is there doc for the exact steps to publish to iOS?

    I am looking for the EXACT steps for publishing to iOS. the Xcode doc talks about "making an archive" but that doesn't seem to work because it is specific to apps made entirely in Xcode. I can get the IPA to an iPad or iPhone attached to the Mac but that's it. certainly I could FEDEX a device to somebody else for them to see it but no, that is not a solution.
    this link (Publishing to iOS devices using Director 12) does NOT have enough information. there are steps missing. for example if you make a Provisioning file on developer.apple.com that version will fail showing a yellow icon when dragging it to the Organizer.
    maybe there is a link that I am missing. please help.

    Hello webdesignsf,
    I’m in the same situation as you – I’m just about to finish my first iPad app, and will be submitting it to the Apple iStore very soon.
    ( Can someone please verify this procedure below )
    As soon as I figure it all out, I’ll write down the steps.
    regard Milky.
    In the meantime, I’m guessing…..
    Get a distribution certificate & make a distribution provisioning profile
    Create icons and screen shots
    (??? maybe  -   Setup for embedded icons – edit the info.plist to reference a unique icons - see the bottom of this message for more info ???)
    Make your .ipa file with Director 12 (using the above distribution certificate – provisioning profile)
    Change the extension of your .ipa file – from .ipa into a .zip   (you just rename the file!)
    Unzip this .zip file –  (this will create a folder called ‘Payload’)
    Find the ‘Payload’ folder – inside you’ll now see a .APP file!
    Highlight this .APP file – and with the right mouse button - select ‘Compress’
    (This will convert the .APP file into a .zip file – this is what Apple calls a binary file)
    Navigate to the iTunes Connect area of the iOS Dev Centre
    Download and install the ‘Application Loader’ utility from the iOS Dev Center  -  (I think is's now a part of xCode too!)
    Go to the Manage Your Apps page and click 'Add New App'
    Fill out the forms describing your company and application
    When asked upload the icons and screenshots
    Save the app description
    Back on the Manage Your Apps page, select the app description you just created, and click the Ready to Upload Binary button
    Fill out the Export compliance form
    Your app should now be in a ‘Waiting for upload’ state in the manage your apps page
    Now use the Application Loader utility to upload your binary file.
    Other Notes:-
    There is a whole list of recommendations for getting apps approved by Apple - I'll write these down one day.
    make sure your app is as small as you can get it, and make sure it’s fast to load up the first screen (3 seconds or less)
    http://www.adobe.com/devnet/flash/articles/app_store_guide.html
    Guide for Apple App Store submissions | Adobe Developer Connection
    There are loads of youTube videos that show submissions to the app store with other development systems,
    but they are mostly the same, when it comes to setting up the distribution certificate etc...
    http://www.youtube.com/watch?v=D4iPyGyrhcM
    Uploading your GameSalad game to Apple - YouTube
    Setup for embedded icons:-
    Submitting icons and screenshots is a part of the app submission process.
    But you may need to create a Director made ‘ipa’ file, with unique icons already embedded first ???  I just don't know yet???
    (pallottadesign) wrote some instructions regarding this way back in May 2013 – I don’t know if this step is needed anymore – but I added it here in case....
    Re: director 12 IOS publishing icon plist
    pallottadesign May 1, 2013 6:17 AM (in response to ralph2511)
    Editing a separate info.plist to reference your app icons is actually a better approach than altering the defaults within Otto.app.
    The procedure is simple:
    Put your unique app icons in the same folder as your Director file. You can name these icons whatever you wish, or name them the same as the defaults in Otto.app, i.e. "projector_72x72.png" and "projector_57x57.png", or you can give them unique names.
    Copy the info.plist file to the same folder as your Director file.
    If you have given your icons unique names, open the info.plist file in Xcode and find the "Icon files" key. Edit "Item 0" and change the entry to the name of the 72x72 pixel png icon. Edit "Item 1" and change the entry to the name of the 57x57 pixel png icon.
    Save the info.plist file.
    Within Director, open Publish Settings and in the "Files" tab, enable "Copy linked and dependent files." Click on "Add Dependent Files" and navigate to the folder with your unique icons. Select each one and make sure that the radio button is checked for each one.
    In the iOS tab, select the "Info Plist Path" option and navigate to the location of your edited info.plist. Select the info.plist file in the dialog box and click "Choose."
    Publish your iOS app and test. The icons should now have been embedded within your iOS app bundle.
    You may be able to put the icons in an "images" folder within your app folder structure, but you will still have to use the "Copy linked and dependent files" and "Add Dependent Files" options to have that folder and the icons bundled within your iOS app.
    If you intend to develop apps for the app store, you may need additional icons at larger sizes.
    For reference: http://developer.apple.com/library/mac/#documentation/FileManagement/Conceptual/FileSystem ProgrammingGUide/FileSystemOverview/FileSystemOverview.html
    and for icons:
    http://developer.apple.com/library/ios/#documentation/userexperience/conceptual/mobilehig/ IconsImages/IconsImages.html

  • With PSE 12, is there a magic trick for repeating editing steps that were done on one photo to another?

    With PSE 12, is there a magic trick for repeating editing steps that were done on one photo to another?

    No magic, sorry...
    If you are able to achieve your goal by using adjustment layers, you can save the first picture in psd or tiff format to keep the layers. If you have a new file needing the same adjustments, have both pictures open and copy the adjustments layers to the new file.
    But the best solution, by far, is to edit in the ACR module. You can use it not only for raw files, but also with jpegs, psd or tiffs. Edit the first picture, then when editing the following one, choose 'previous version' from the menu icon on the right of the 'basic' tab.

Maybe you are looking for