Business Rule Sequence Error in Planning

Hello Everyone,
I have a Planning application where users can run a sequence of rules by going to Tools > Business Rules and selecting the sequence. The sequence has about 8 rules in it. The sequence errors after the 7th rule (a currency conversion/calculation which takes upwards of 12 minutes). The logs do not say anything about an error, however, it does say that the active user was cleared on the database. (The BR log says that the rule never finished but the Essbase log says that it finished. The following rule in the sequence never starts.
Note: The business rule sequence completes without errors when the sequence is started from Essbase Administration Services.
Is there some type of timeout/setting update I should look at or any suggestions on where to look within the business rule?
Thank you,
Mark

Hi,
Have a read of the following :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch02s07s04.html
It explains how to set the threshold before business rules are run in the background to get around timeouts.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Business Rules not available in Planning

I logged into EAS console and created a business rule against my planning outline. It validated properly and even runs properly from the EAS console (changes data as expected).
But when I log into Planning to assign this rule to a form the business rule is not listed either under the TOOLS > Business rules menu option or under the Business Rules Tab in Form editor.
What do I need to do to get this business rule into Planning?

I am on 9.3.1.
I have 2 servers, the essbase (hy01) and the planning (hy06). When logging into EAS I usually select the essbase server to log into (hy01). I created 1 business rule while logged into hy01 and it appeared when I logged into planning through workspace. I associated that BR with the outline hy06/AppName/DBname and used that as the location as well.
After that business rule was a grand success if I log into hy01 when logging onto EAS and then try to expand the BR node I get a "Error logging in to Business Rules. The repository has not been configured or you are not authorized to use Business Rules."
But I can log into EAS using hy06 and access the business rules just fine (including the original one). But every business rule I have created since then does not show up into planning.
So, in retrospect, I guess my question might be why can't I use Business Rules when logging into EAS through the Essbase server (hy01) but have full functionality when logging in through planning server (hy06) except for being able to then see the business rules I create in Planning through Workspace?
I am logged in as admin and no permissions have changed.

Business rules from epma to planning

Hi,
In EPMA version 11.1.12 I am having an issue with business rules. I wrote and deployed a business rule from EPMA to planning and everything was fine, the rule ran on save in the data form.
Now, I tried to run the rule a few days later and it won't run. I tried to remove and re-add the rule, but now its not visible. In planning, I can't see 'business rule security' in the administration drop down.
I deployed the application and all the rules and everything is successful, but still nothing in planning. In another application the rules are there.
How could a business rule disappear from planning and not show up again when it was deployed? Any help is appreciated. Thanks,
Dq

We sometimes see similar issues when the services are recycled in the wrong order. Perhaps a service failed or was restarted (after you had been successful in running the business rule from Planning)?
- Jake

Business rules execution error

Hi,
I am facing an error with business rules and forms.
We are having 6 folders and each folder relating to different departments and each department (folder) contains 5 forms.
The same environment is in UAT server and Production server.
The same UAT server is migrated to Production.
Here the problem is example: In each folder, form 2 is tagged with 3 business rules like rule1, rule2 and rule3.
These 3 rules are same for the form 2 in all folders, except the legal entity, code, prduct will be vary as per the user selection.
but the code is same.
In these 3 rules, the first 2 rules rule1 and rule2 are not working. While double clicking the rule, its says that, error while executing the calculation script. Please check the log file. The same error coming for form 2 in all folders with the same rules which are tagged.
But the same rules are working with the same form in UAT environment. I have tried to change the rules from UAT to Production.
After changing the rules also, the same error is coming while executing the business rule.
So can any one suggest me what to do and how to resolve this.
Thanks & Regards
RREDDY

The same error when executing the business rule after opening the form.
" Error executing the calculation script. Check log for details"
I have checked the log also, but its also showing the same sentence.
While validating the rule, I have checked the same thing and I have compared with the UAT settings also. Its all are fine.
Only these 2 rules with the same form in all the folders are getting the error.
I have done one more thing that copying the content of Business rule code in UAt and paste the same in Production and saved it.
I have checked all other settings they are remain same and no changes. Then I have detached the rules from web form and saved it and log-off from planning.
Again logged in and tagged the BR's to the form and tried to execute, even then also the same error coming.
thanks
rreddy
Edited by: user4483519 on Sep 21, 2009 4:39 AM

Validation of business-rule gives error

Hi,
After valadating the following business-rule i get an error message.
0001 FIX ("FY08","50120","DEC")
0002 FIX ("EJV2")
0003 Cleardata "50160" ;
0004 ENDFIX
0005 DATACOPY "50120"->"EJV1" TO "50160"->"EJV2" ;
0006 ENDFIX
The error message is:
Validation error from planning server 'http://sth135.gwnet.nl:19000/HyperionPlanning/servlet/HspAppManagerServlet'.
'Error:Cannot calculate dimension member [50160] with restricted member [50120]An error occurred while running the specified calc script. Check the log for details. on Rule object with name EPMSPEEL.Resultatenrekening.test'OK (O)
It seems to have something to do with a calculation that tries to calculate a member after restricting the calculation to a different member in the same dimension. However, as my knowledge of businessrules is (yet) limited I can not figure out how to adjust the rule properly.

You can not fix on a dimension and do subsequent calculations on that dimension. For example you can not say :
Fix(Jan)
Jan = Feb + March;
EndFix
You need to limit the scope in the fix statment to other dimensions not the one you are trying to calculate

Two business rules runtime errors

Hi,
The business rules looks very nice but I got two runtime errors, The first I have to deploy twice else I got a wdsl error
08/02/17 13:05:16 -------> CompositeDeployerTimer: deploying composites ...
08/02/17 13:05:16 --------->deploying composite model: businessrules/br!1.0*2008-02-17_10-23-41_328
17-feb-2008 13:05:16 oracle.integration.platform.PlatformMessages warningUnableRegisterService
WARNING: Unable to register service.
oracle.fabric.common.FabricException: Error in getting XML input stream: OrderCheckRules_DecisionService.wsdl: Error in getting XML input stream: OrderCheckRules_DecisionService.wsdl: Error in getting XML input stream: oramds:/br/OrderCheckRules_DecisionService.wsdl: MDS-00054: Het bestand dat moet worden geladen oramds:/br/OrderCheckRules_DecisionService.wsdl bestaat niet.
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getDocumentAsInputStream(MDSMetadataManagerImpl.java:341)
     at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:141)
     at oracle.fabric.composite.model.CompositeModel.loadImports(CompositeModel.java:149)
     at oracle.fabric.composite.model.CompositeModel.getWSDLManager(CompositeModel.java:130)
     at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.load(WebServiceEntryBindingComponent.java:89)
The other is more serious. All the business rules fails with the same error.
17-feb-2008 13:11:45 oracle.bpel.services.common.ServicesLogger __log
SEVERE: <.> ORABPEL-36335
Fact not found in the rule engine working memory, rule session execution failed.
The rule session bpel:1701 failed because an instance of the fact credit_check_br.OUTPUT could not be found in the working memory of the rule session.
This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. Contact oracle support if error is not fixable.
17-feb-2008 13:11:45 oracle.bpel.services.common.ServicesLogger __log
SEVERE: <.>      at oracle.bpel.services.rules.rpi.oracle2.OracleRuleSession.executeUnitOfWork(OracleRuleSession.java:516)
17-feb-2008 13:11:45 oracle.bpel.services.common.ServicesLogger __log
SEVERE: <.>      at oracle.bpel.services.rules.rpi.AbstractDefaultRuleSession.execute(AbstractDefaultRuleSession.java:272)
17-feb-2008 13:11:45 oracle.bpel.services.common.ServicesLogger __log
SEVERE: <.>      at oracle.bpel.services.rules.rpi.oracle2.OracleRuleSession.execute(OracleRuleSession.java:246)
17-feb-2008 13:11:45 oracle.bpel.services.common.ServicesLogger __log
SEVERE: <.>      at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1273)
17-feb-2008 13:11:45 oracle.bpel.services.common.ServicesLogger __log
SEVERE: <.>      at java.lang.Thread.run(Thread.java:595)
17-feb-2008 13:11:45 oracle.bpel.services.common.ServicesLogger __log
SEVERE: <.> ORABPEL-36333
Error while executing the rule session.
The rule session bpel:1701 failed to execute.
Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
17-feb-2008 13:11:45 oracle.bpel.services.common.ServicesLogger __log
SEVERE: <.>      at oracle.bpel.services.rules.rpi.AbstractDefaultRuleSession.execute(AbstractDefaultRuleSession.java:287)
SEVERE: <.> Fact not found in the rule engine working memory, rule session execution failed.
The rule session bpel:1701 failed because an instance of the fact credit_check_br.OUTPUT could not be found in the working memory of the rule session.
This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. Contact oracle support if error is not fixable.

I'm not sure what you did to create the rule you are running here. Did you try the Rules chapter of the 105 sample on the TP3 page? That one does work.
Once you have it working using the sample, try your exercise again and let us know what you did to create your rule. There are many permutations here and we want to know what doesn't work.
Heidi.

Business Rules Not Visible in Planning.............

Hi All,
I have created business rules in Essbase & works well.But Those are not showed in planning App.Here , While i'm
creating Business Rules ,able to access for essbase only , when click on planning to shows unable login planning.
Plzzzzzzzz help out.......
Thanks

I am having the same problem with accessing business rules in version 9.3.1. I have been working with Oracle support for 5 months now trying to resolve this and they have not been able to help.
This application has been up and running for over a year before this behavior occurred. Previously users were able to view and run business rules. It is only affecting non-native authenticated users. The admin user and natively authenticated users can run/edit & vaidate rules. In order to run business rules all users have to log in with the admin user ID (not a good solution).
Any ideas, clues or new method of debugging this issue would be appreciated.
Thanks
John

Problem with Business rule-Essbase Error(1042017):

Hi,
I am getting the following error when i run this business rule specifically.
Detail:Cannot calculate. Essbase Error(1042017): Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I dont get this error with any other rule. I have checked the solution provided in this link
_[http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_error/erhelp.htm#ercalc.htm]_. But this solution wont help because i dont get this error in any other rule.
The rule i run is
"Depreciation Value" = "Cumulative.Asset value"/ ("Assumptions_Programs"->Jul->@UDA(Entity,@NAME(@CURRMBR(Location)))->@UDA(Location,@NAME(@CURRMBR(Location)))->"Assets life in months");
The functions in the above rule will get replaced as below
"Depreciation Value" = "Cumulative.Asset value"/ "Assumptions_Programs"->Jul->IND_Assumptions->LOC_IND->"Assets life in months";
If i hardcode and run, i dont get this error. Please help.
Regards,
Ragav.

The reason it works when you hard code it and why it doesn't when use UDA is simply that you should never have a multiple answers in a cross dimensional. @UDA function returns multiple answers. Even if for your case it only brings back one I believe it is tripping up the calculation. Worse if you are actually bring back multiple answers for @UDA that is definitely not going to work.
I would have to understand all your fixes above the calcultion to recommend you the best possible solution. But at least you understand why you are getting the error and what you have to fix

Business rules and CalcScripts in Planning

Hi Friends
In Planning if we go to Tools-> Business Rules, we can see all the calc scripts and Business rules associated with the available plan types.Is there any way we can limit to see only business rules not the calc scripts.some of our Finance users have admin access to planning, so we do not want them to access and run calc scripts in planning.
We are on 9.3.3
Please suggest.
Thanks,

If they are admins they are probably going to see everything.
Some Oracle support docs may be of some use for users that are not admins:
"Planning Interactive user is not able to see and run calc script within Planning web [ID 738394.1]"
"Set Access Privileges For Calc Scripts In A Planning Application [ID 753367.1]"
Cheers
John
http://john-goodwin.blogspot.com/

Business Rule Validation Error

Hello,
Please help me I'm finding the this error when I'm validating Business Rule in Admin Services.
"Unable to run or validate this rule (Demo2) against the following location: Essbase/Amit-pc/Sample/Basic for user Admin"
Rahul

Hi,
Make sure you add the location in the locations tab of the business rule, then give the user access in the next tab along.
Cheers
John
http://john-goodwin.blogspot.com/

Business Rule Sequence issue

Hi,
We have our system on 9.3.0.1 and I am currently facing a strange issue.
I have a set of rules that I have added to an existing sequence. Now I want these rules to execute in an order and I have set the order in the sequence. However when I save, close and open the sequence again, it randomly changes the order.
Has anyone seen this issue before?
Regards,
Amol

Hi,
Well firstly the version 9.3.0.1 isn't a very stable one. So if you are working on 9.3.1 or above then I don't think it should affect you. Also what I noticed was that as long as the total number of business rules in the sequence were less than 10 then it wouldn't cause the issue.
Hope it helps.
Regards,
Amol

EPMA Business Rule Validation Error

Validation error from planning server
“http://servername
Appname=finplan1
‘Error: Cannot calculate dimension member [20010] with restricted member [Cost per Unit COS Material] on Rule finplan1.URC.Manufacturing Cost Calc’

Are both of those members in the same dimension? Meaning do you have Cost per Unit COS Material in a fix statement and _20010_ in the calculation?

Business rule Log/error files in 11.1.1.3?

Hi,
How can I trace out the status of business rules in EAS for running a calculation on essbase cube.where can I find these log/error files?
In log files can we trace out the error like where it went wrong...?
Thanks

If you have a look at hbrlaunch.log it will provide details of the business rules that have been run.
If on 11.1.1.3 and windows the file can be by default in C:\windows\system32
If you do get any errors running the rule then the essbase app log is probably the best to find more information on the error.
Cheers
John
http://john-goodwin.blogspot.com/

Business Rule Importing Error

Hi All,
I am working on Hyperion Planning 11.1.1.3 and Essbase the same version.
I took the back of my project related BR back like this.
1) Right Click on the Business Rule and imported
2) Selected my project related BR
3) Select the dependants and click on Export.
4) Saved in C drive.
I successfully migrated the application to another system. But BR cant imported.
Please, any one help me out on this.
Thank You
EP

Hi,
Make sure you add the location in the locations tab of the business rule, then give the user access in the next tab along.
Cheers
John
http://john-goodwin.blogspot.com/

Business Rules are inconsistent in Planning

Can someone confirm if ALL business rules have to be consistent in these both places:
1. Navigate Icon -> Administer -> Calc Manager -> you drill down to Rules BR
2. Tools -> Business Rules
Why am I seeing differences between the two???

If you have not deployed all the rules from calc manager then there will be a difference.
Cheers
John
http://john-goodwin.blogspot.com/

Business Rule Sequence Error in Planning

Similar Messages

Maybe you are looking for