Business System in XI not able to attach Receiver/Sender interfaces.

I understand the difference between Business System and a Business Service  (as I can read sap help and the previous posts on this subject thankyou).
I have a 3rd Party Warehouse system (Manhattan).
I have defined this in the SLD and imported this into XI as a Business System.  As that seemed like the correct way rather than simply just defining it as a Business Service.
I have used this in various configurations and it seems fine.
But check this out.
If in XI Configurator you go into the Business System it is not possible to attach Receiver and Sender Interfaces to it like you would for a Business Service.  This means that everytime you want to use an Interface you have to do a search all instead of just being able to picking it up off the ones defined against the System (like you can for a Business Service).
This is a little annoying and I wonder if I am doing something wrong.

Hi,
So how do I assign my SWCV to a Technical System in the SLD?
While configuring technical system in sld it will ask about the details of product and its software component version.
Maybe these steps may help you.
Choose New Technical System.
The browser displays the screen Technical System Wizard in a separate window.
       2.      Select Third-Party, and then choose next.
       3.      Enter the system name and the host name of the system, and then choose Next.
The browser displays all the registered SAP product versions in the list Available Products.
       4.      Select the SAP products that are installed in the third-party system, and then choose Add.
On the lower part of the screen, the browser displays a list of all the software components that are contained in the selected products.
Repeat this step as many times as necessary until you have added all products.
To remove a product, select it in the list, and then choose Remove.
You can add more products to this system at a later stage.
       5.      Select the software components that are actually installed in the system.
       6.      Choose Finish.
The SLD server has now registered the new third-party system.
Regards,
Pradeep A.

Similar Messages

  • The business system HRK_005 is not a business system in the group assigned

    Hi there,
    i have a Problem. I want to transport a Scenario from our Consolidation to our Prod System.
    In this Szenario, there are XI and HR Systems included.
    On Consolidation Side:
    XIK_001
    HRK_005
    in Prod
    XIP_001
    HRP_001
    When i now export the whole Scenario from our K System and want to import it to our P Systems the following error occurs:
    The business system HRK_005 is not a business system in the group assigned to production.
    I have no System HRK_005 in production. HRK_005 is in Group Consolidation?!?
    Can someone help here?
    Thanks
    Bjoern

    Oops i spoke with u r key code it bounced back .
    Well i explained standard way to export and import Intergration Directory objects.
    K - Development System ( SLD_Dev)
    P - Production System (SLD _Prod)
    In K - SLD_Dev needs Group -- This is based on the Integration Server (IS) of the K / P XI server.
    IS (K) -- Group1 / IS (P) -- Group2 (All this in the SLD_Dev)
    Assign all BS of K to Group1
    Assign all BS of P tp Group2
    For BS of K specify the target transport as Production BS (P).
    Now goto P (SLD_Prod) create the BS as same in K what you have created in Group2
    Now export from K (Dev) to P(prod)
    am not able to view the link provided.
    Any ways i have listed standard way for transport, hope this helps
    Srini

  • HT1338 Not able to attach any files ?

    Not able to attach any files over gmail, hotmail or even mail from past 2 days ?

    Hi,
    I need more information to solve your issue. I can attach files just fine using Safari.
    Have you tried another browser such as Firefox?
    Is system up to date? Run Software Update to make sure and update if needed.
    Hope this helps.

  • Not able to attach final signed document in the contract document

    Dear Experts,
    The upload field for final signed document in the contract document is visible only for the latest/last contract document if there are more than one contract document exist in the Master Agreement.
    For the previous contract documents, not able to attach final signed document (i.e) the upload field is invisible.This scenario is occuring only in few master agreements, mostly found in Legacy agreement types.But for newly created legacy agreements this scenario is not occuring.Please help me in finding out why the upload field is visible only for the last/latest and not for the previous ones.

    Hi Dinesh,
    Did you find a solution to this?
    Regards,
    NR

  • Not able to attach Policies to documents

    Hi all,
    I have installed both LiveCycle Policy Server and LiveCycle Document Security on my machine.I created few organinzational polices using the Policy Server web pages.Now when I write a code to attach these policies to documents,I get an error.This is the method I used.There is an error authenticating this user.This is the default administrator to the policy server.
    licenseID=pdfDoc.applyPolicy("7DEBA20A-1AC6-3BCF-60DC-A278593A6A20","administrator", "password","securedDoc", "0020047553255253");
    I am able to log into Policy Server with this userID and password.But i am not able to attach policies.There is nothing wrong with the permissions as this is the super administrator account.As soon as i run this code,the check the events list in the policy server and this is wat it gives me:
    Failed Login
    Authentication failed for userid ???????
    Am I missing out on something?
    Regards,
    Praneeth
    Hyderabad,India

    If you are using the Policy Server administrator account as the user attempting to apply the policy, this will fail. You must use a "regular" policy server user account to apply policies.
    It looks like you may be using the wrong account:
    licenseID=pdfDoc.applyPolicy("7DEBA20A-1AC6-3BCF-60DC-A278593A6A20","administrator", "password","securedDoc", "0020047553255253");
    Try using the same account that you are using in your code (applyPolicy ) in Acrobat to apply the policy. If it fails, then you know there is an issue with the user account that you are using.

  • While i am creating my business rule i am not able to connect the planning

    while i am creating my business rule i am not able to connect the planning application and database?I dont know what is the reason?

    Make sure you log into the planning application before logging into EAS.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

                      Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

    Take each of the following steps that you haven't already tried.
    1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
    2. From the menu bar, select
     ▹ System Preferences ▹ Sound ▹ Output
    Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
    3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
    5. Reset the NVRAM.
    6. Reset the SMC.
    7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
    8. Make a "Genius" appointment at an Apple Store.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
    *An SSD doesn't need to be zeroed.

  • I am not able to attach any file/s to outgoing yahoo emails on my iMac. It has Mac OS X 10.7.5. Any solution pls.

    I am not able to attach any file/s to outgoing yahoo emails on my iMac. It has Mac OS X 10.7.5. Any solution pls. It gives following message if I click "ATTACH FILES"
    Attach Files
    There was a problem!
    Invalid file specified . Please try again. 
    Click "Browse" to select a file. You can attach files up to a total message size of 25 MB.     What's this?
    File 1: 
    File 2:
    File 3:
    File 4:
    File 5:
    To avoid sending an infected file, your attachment will be scanned by:

    A good place to start.
    http://help.yahoo.com/kb/index?page=content&id=SLN3222&locale=en_US&y=PROD_MAIL_ ML

  • Not able to attach library

    Hi All,
    I have a problem with webutil, I attached the webutil library and complied the form on local machine running OC4J, then later I tranfered the complied version on machine running Application Server 9.0.4.
    The form is running fine on local machine but through App. server its not able to attach the webutil library and in error it mentions the path of local machine where is I didn't keep the path while attached the webutil.
    Any clue ?
    I suspects its the jre installation or signing of the webutil, but how can I make sure ?
    Any help will be appriciated, Best Regards.

    copy the webutil.plx in the directory, too.

  • Not able to Attach PNG Files

    Today I am not able to attach png files. I had to convert images to jpg to insert it here.

    I suppose it was a temperary glitch or there wasthis upgrade going on.... Laura has to confirm

  • I am not able to attach files (picture) to my e-mail.

    I am not able to attach files (pictures) to my e mails. My picture folders are located on my desktop. I normally click on the icon for attachments, and choose the picture I want to send. Now it just shows sending and it doesn't send. A pop up will show displaying technical problem.

    I'm having the same problem with FF19.02 using Yahoo mail. Just as of 4/4/2013 we have not been able to attatch any type of a file. Don't want to go back to IE9 where it is working. C'mon FF. You're wise enogh and should be able to solve this problem ASAP. No one wants to go backwards to IEx.x. We need you

  • Not able to attach files other than photos/videos on iPad Safari/Chrome

    Not able to attach files other than photos/videos on iPad Safari/Chrome

    You cannot attach them in a mail.
    But, you can do this.
    1. Go to the document.
    2. Tap on share button.
    3. There should be an option "Mail"
    4. Tap on it and attach.
    Note:
    1. If you are checking your mail in browswer - this does not work.
    2. You cannot attach it to the mail you are currently composing.

  • I am using apple iPad with iOS 7. I am not able to attach excel or work files in mail . Please help

    I am not able to attach excel or word file using iOS 7 mail

    Generate the email from an App that handles the document type like Pages for Word and Numbers for Excel.

  • I am not able to attach a 2486KB file from Yahoo email via Firefox but I can via IE. What is the problem? I just upgraded to 3.6

    I am unable to attach/send a 2486KB file when using Firefox browser. I am able to attach and send via Internet Explorer though. Up until a few days ago, this was never a problem. I've sent the file before. What could be the problem? I am very frustrated.

    I do have anti-virus software that scans the files. It sounds like you are accurate. But nothing is new...I have sent the same file numerous times in the past with no problems, but all of sudden, I can't send the file. What can I do to fix this problem?

  • TS3899 Not able to send emails. Also not able to downlow  videos send from another iPhone to my.

    Not able to send out emails. Also not able to downlow videos send from another iPhone to my.

    depending on what email account you are using, you may need to enter a password for you outgoing mail server, go back into mail settings and check, same p/w as your incoming mail server.

Maybe you are looking for