Button Enabled/Disabled linked to FormMode?
Hi,
I am new to SBO SDK and am in a learning as I go process having done basic training.
I am adding a button to the business partners page.
The new button I need 'greyed out' "oForm.Items.Item("oBtn1").Enabled = False" when the form mode is add or find and Enabled otherwise.
I have tried linking to another button that follows such logic as essentially the conditional is processed anyway and alternatively I have tried as below by interrogating the current form type.
Private Sub oApp_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles oApp.ItemEvent
Try
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_LOAD And pVal.FormType = 134 And pVal.Before_Action = True Then
Dim oItem As SAPbouiCOM.Item
Dim oForm As SAPbouiCOM.Form
Dim oButton As SAPbouiCOM.Button
oForm = oApp.Forms.GetForm(134, 0)
oItem = oForm.Items.Add("oBtn1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
oItem.Top = oForm.Items.Item(1).Top
oItem.Left = oForm.Items.Item(1).Left + oForm.Items.Item(1).Width + 65
oItem.Width = oForm.Items.Item(1).Width + 10
oItem.Height = oForm.Items.Item(1).Height
oButton = oItem.Specific
oButton.Caption = "Discounts"
If pVal.FormMode = SAPbouiCOM.BoAutoFormMode.afm_Add Or pVal.FormMode = SAPbouiCOM.BoAutoFormMode.afm_Find Then
oApp.MessageBox("add mode")
oForm.Items.Item("oBtn1").Enabled = False
ElseIf pVal.FormMode = SAPbouiCOM.BoAutoFormMode.afm_Find Then
oApp.MessageBox("find mode")
oForm.Items.Item("oBtn1").Enabled = False
ElseIf pVal.FormMode = SAPbouiCOM.BoAutoFormMode.afm_Ok Then
oApp.MessageBox("ok mode")
oForm.Items.Item("oBtn1").Enabled = True
ElseIf pVal.FormMode = SAPbouiCOM.BoAutoFormMode.afm_View Then
oApp.MessageBox("view mode")
oForm.Items.Item("oBtn1").Enabled = True
End If
End If.....
What s the best method, and also how can it be updated if the form changes from add mode to ok mode for example as this only executes on form load.
Any help greatly appreciated.
Dave A.
Edited by: David Alexander on Jul 22, 2008 3:23 PM
Welcome on Board !
I am suggesting to Use the Automanaged property. See more information in the help ! It happens sometimes (orange arrow) links that forms working strange.
'... from your code...
oForm.Items.Item("oBtn1").SetAutoManagedAttribute( [AttrType],[ModeMask],[Behavior])
Where
AttrType
ama_Visible - Selects the visible item attribute.
ama_Editable - Selects the editable item attribute.
ModeMask
afm_All -1 Specifies all modes are available to your form.
afm_Ok 1 Specifies OK mode is available to your form.
afm_Add 2 Specifies Add mode is available to your form.
afm_Find 4 Specifies Find mode is available to your form.
afm_View 8 Specifies View mode is available to your form.
Behavior
mvb_False - The setting in AttrType parameter is false.
mvb_True - The setting in AttrType parameter is true.
mvb_Default - The item attribute behaves according to the attribute default in the specified form mode.
Regards,
J.
Similar Messages
-
Button enable/disable in Master-Detail table
I am using JDeveloper 11.1.1.3.0 and I have a page fragment (.jsff) which includes a Master-Detail table and the Master table has 3 buttons that get enabled/disabled based on the specific string within a column say, if the column has value, 'DRAFT', the buttons should be enabled. In all other cases, the buttons should be disabled.
The above mentioned scenario works in cases where the table has more than one row in the table; but in two cases the buttons don't get enabled even though the column has 'DRAFT' as its value:
1. when the table first loads with the data populated in the table; clicking on the first row doesn't trigger the buttons, clicking on any other row triggers the buttons
2. when there is only one row in the table
To resolve this, I tried looking at the logs for any specific information regarding the buttons getting enabled or disabled. I couldn't find info on setting up a breakpoint for the commandbutton and the disabled property which would enable me to determine whether it is being triggered as soon as the table gets populated or not.
How can I get the buttons to work per my requirements? Also, can I set breakpoints for the button and/or evaluate disabled property's EL expression?
Thanks in advance.Navaneeth:
The buttons are part of panelCollection which exists in panelHeader. As the below code demonstrates,
1. Buttons are defined in the toolbar (t2) in panelCollection (pc1)
2. Each buttons' partialTrigger is set to the table (md1)
3. Tables' (md1) partialTrigger is set to the toolbar (t2).
<af:panelHeader text="#{viewcontrollerBundle.HISTORIC_PANEL_SPECS__TESTER_S}" id="ph2">
<af:panelCollection id="pc1" styleClass="AFStretchWidth">
<f:facet name="menus"/>
<f:facet name="toolbar">
<af:toolbar id="t2" partialTriggers="t2">
<af:commandButton actionListener="#{bindings.promotePanelSpec.execute}"
text="#{viewcontrollerBundle.PROMOTE_PANEL_SPEC}"
id="cb1" icon="/Images/up16.png"
partialTriggers="md1"
disabled='#{bindings.Status!="DRAFT"}'
immediate="true"/>
<af:commandButton text="#{viewcontrollerBundle.ADD_TESTER_SPEC}" id="cb2"
partialTriggers="md1"
icon="/Images/action_add.gif"
actionListener="#{bindings.CreateWithParams.execute}"
action="addTestSpec"
disabled='#{bindings.Status!="DRAFT"}'/>
<af:commandButton actionListener="#{PanelSpecTesterSpec.deleteTesterSpec}"
text="#{viewcontrollerBundle.REMOVE_TESTER_SPEC}"
id="cb3" partialTriggers="md1 ::pc2:t1"
icon="/Images/delete.png"
disabled='#{bindings.Status!="DRAFT"}'/>
</af:toolbar>
</f:facet>
<f:facet name="statusbar"/>
<af:table id="md1"
rows="#{bindings.PanelSpecTesterSpecView1.rangeSize}"
fetchSize="#{bindings.PanelSpecTesterSpecView1.rangeSize}"
emptyText="#{bindings.PanelSpecTesterSpecView1.viewable ? 'No data to display.' : 'Access Denied.'}"
var="row"
value="#{bindings.PanelSpecTesterSpecView1.collectionModel}"
rowBandingInterval="0"
selectedRowKeys="#{bindings.PanelSpecTesterSpecView1.collectionModel.selectedRow}"
selectionListener="#{bindings.PanelSpecTesterSpecView1.collectionModel.makeCurrent}"
rowSelection="single" partialTriggers="::t2"
filterVisible="true" displayRow="selected"
filterModel="#{bindings.ProductIdPanelSpecVersionToolNameQuery.queryDescriptor}"
queryListener="#{bindings.ProductIdPanelSpecVersionToolNameQuery.processQuery}">
<af:column headerText="#{bindings.PanelSpecTesterSpecView1.hints.ProductId.label}"
sortProperty="ProductId" sortable="true" id="c39"
filterable="true">
<af:outputText value="#{row.ProductId}" id="ot28"/>
</af:column>
<af:column headerText="#{bindings.PanelSpecTesterSpecView1.hints.Status.label}"
sortProperty="Status" sortable="true" id="c43"
filterable="true">
<af:outputText value="#{row.Status}" id="ot40"/>
</af:column>
</af:table>
</af:panelCollection>
</af:panelHeader>The fact that the above code works when there are multiple rows tells me that buttons are having trouble reading the first row of the table.
Also, I changed the displayRow property for the table from "selected" to "first" but no luck either. -
Jsf+javascript for form button enable/disable
I have a page that has checkboxes and input boxes on it. I want the submit button disable when the page initially loads, and then upon making any chages to the form fields, enable the submit button. I have the javascript working, but the form is actually not going to my submit method in my backing bean. Here is my javascript:
function enableSubmitButton(form, inputElement) {
var formId = document.getElementById(inputElement.id).form.id;
var submitButtonId = document[formId][formId+":submitButton"];
submitButtonId.disabled = false;
submitButtonId.setAttribute("class", "inputButton");
submitButtonId.setAttribute("className", "inputButton"); // for IE which does not recognize "class"
}Here is an example of a checkbox:
<h:selectBooleanCheckbox id="chkChannelEmail"
value="#{services.emailSubscribed}"
rendered="#{services.renderEmail}"
onclick="displayRequiredFields(this, 'chkChannelService); enableSubmitButton(this.form, this);">
</h:selectBooleanCheckbox>and here is my command button
<h:commandButton type="submit" value="Submit" id="submitButton" action="#{BackingBean.submit}" styleClass="inputButtonDisabled" disabled="true" />It seems to be updating the disabled value, because when my page loads up, i can alert out the disabled value, and it is true, and if I click on a checkbox, it alerts out that the disabled value is false, but submitting my page doesn't actually work.
Thanks!!
Edited by: jrthor2 on Oct 16, 2009 3:10 PMThe commandbutton won't be invoked as long as the disabled attribute still evaluates to 'true' in the server side. So you need to solve this the other way. Let the disabled attribute for example depend on a request parameter or pass a hidden input element which notifies JSF that the disabled attribute should evaluate to 'false' and so on.
The same story applies on the 'rendered' attribute by the way. -
Enable/disable/defaulting the radio button in tabular Form
Hi friends,
I have one radio button column in my tabular form with 3 values for it.
<li>FC
<li>BC
<li>EC
I need to enable/disable the radio buttons according to the position of the user.
If the position of the user is CEO means,
then FC radio button has to be checked defaultly and also for him he needs to have BC and EC radio buttons to be enabled.
If the position of the user is between(1-4) grades means,
then FC radio button has to be disabled, but BC radio button has to be checked defaultly and also for him he needs to have EC radio buttons to be enabled.
If the position of the user is between(4-6) grades means,
then FC, BC radio button has to be disabled, but EC radio button has to be checked defaultly.
How i can achieve this radio button enabling/disabling and defaulting it dynamically according to the user.
Where i need to specify this kind of restriction inorder to work for me in my application.
Brgds,
MiniHi Bob,
thanks for your reply first, and your suggestion too.
I tried in the below manner on the lov definition of my radio button and it hide/shown according to the user who logs into the application.
SELECT 'FC' d, 'FC' r FROM DUAL WHERE lower(:APP_USER) = (select lower(user_name) from apps.xxhy_ams_details_v where upper(job_name) = 'CEO')
UNION ALL
SELECT 'BC' d, 'BC' r FROM DUAL WHERE lower(:APP_USER) IN (select lower(user_name) from apps.xxhy_ams_details_v where grade_name
BETWEEN 1 and 4 OR lower(:APP_USER) = (select lower(user_name) from apps.xxhy_ams_details_v where upper(job_name) = 'CEO'))
UNION ALL
SELECT 'EC' d, 'EC' r FROM DUALBut how i can check the radio button defaultly according to the user who logs in .
<li> If the employee with the position CEO logs into the application means, he needs to have FC to be checked defaultly.
<li> If the employee with the grade between(1-4) logs into the application means, he needs to have BC to be checked defaultly.
<li> If the employee with the grade between(5-12) logs into the application means, he needs to have EC to be checked defaultly.
Note:
Instead of hide/show the radio buttons defaultly whether it is possible to enable/disable the radio button according to the user who logs into the application.
Brgds,
Mini... -
Hi all,
I have to make at run time enabled or not a button... I have created an attribute in my context, the type is WDY_WB_PROPERTY_BUTTON and I have associated my button at this attribute, so in the method "WDDOINIT" I write this code:
IF flag IS INITIAL.
button-ENABLED = ' '.
ELSE.
button-ENABLED = 'X'.
ENDIF.
wd_context->set_attribute(
name = 'BUTTON'
value = button ).
ENDIF.
but I don't see never my button, although flag = 'X'.... How can I do?bind the VALUE propery of ur button with context attribute of type WDY_BOOLEAN
For making button enable/disable , we have to bind Enable property of button with an attribute of type wdy_boolean.
There is no property of button by name value. -
How can I control the enable/disable of command buttons in ADF JSF
I have been having a great deal of trouble trying to work out how to control the command button such that if the rowset is null then the button is disabled. The trick is that the rowset is not defined by the view where the command button is located. The rowset is defined by a view which has a "view" command button which displays the specific row selected, then this view has a command button that will display the detail rowset of the selected master row, but if there are no detail records I want the button to be disabled. How can I do this in ADF JSF? If I use a backing bean to make the determination prior to the page rendering then how does the backing mean method set the parameter necessary to disable the command button? Any advice or tutorial that I can use is most appreciated. My goal with using ADF JSF effort was to demonstrate that a complex app could be generated with minimum coding, I would like to keep to this concept if possible. Thanks,
MichaelHi Michael,
You can probably set the Enabled property of the command button using an EL that would evaluate and return true or false based on your requirement.
Check out these links for more information on using the EL.
http://radio.weblogs.com/0118231/2006/11/10.html
http://database.in2p3.fr/doc/oracle/Oracle_Application_Server_10_Release_3/web.1013/b25947/web_dcp006.htm
-Arun -
Enable/disable lov button in a multi-row bloc
Hi all,
I have a form in which there is a multi-row block with some lov buttons related to some items,
in query mode, user should not be able to modify item, item property update_allowed is set to false, that worked, but user is able to modify item when he clicks on the lov button...so i want to disable the button for query records and for record in (insert or new), button should be enable,
i tried some tips but don't work, do you have any idea
Thanks for your help.Hi,
Can you suggest some methods to enable/disable LOVs in my search query? I have a customized VC which performs search and I need to enable/disable the LOVs depending on requirement.
Abhishek -
How to use a radio button in enabling/disabling a text box in report progra
Hi,
Could any please let me know, how to use a radio button in enabling/disabling a text box in report program.*& Report ZMR_RADIO_BUTTONS
REPORT ZMR_RADIO_BUTTONS.
PARAMETERS : R1 RADIOBUTTON GROUP G1,
R2 RADIOBUTTON GROUP G1.
PARAMETERS : A1 TYPE I,
A2 TYPE I.
AT SELECTION-SCREEN OUTPUT.
*initialization.
IF R1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
ENDIF.
IF SCREEN-NAME = 'A2'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 1.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 1.
ENDIF.
IF SCREEN-NAME = 'A2'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
ENDIF.
modify screen.
ENDLOOP.
ENDIF.
START-OF-SELECTION.
*IF R1 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 1.
ENDIF.
*ENDLOOP.
*ENDIF.
*IF R2 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A2'.
SCREEN-INPUT = 0.
SCREEN-ACTIVE = 0.
ENDIF.
*ENDLOOP.
*ENDIF. -
Enable/disable operation buttons according to the selected row in table?
Hi,
I used JDev 11.1.1.2.0
On my main page, it has a query section and display search result to a table component, and also has some operation buttons like (update/delete) on the toolbar.
I want to enable/disable the operation buttons according to some filed value of the selected row in the table, and I searched the OTN forum, found more questions like this but seemed no found one right solution.
The table is single selection, and has a status column, its data type is Integer, and I want to enable buttons when the selected row's status field value is 0 or 1, disable buttons when status value is other values.
Table code like:
<af:table value="#{bindings.VO1.collectionModel}" var="row"
rows="#{bindings.VO1.rangeSize}"
emptyText="#{bindingsVO1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.VO1.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.VOCriteriaQuery.queryDescriptor}"
queryListener="#{bindings.VOCriteriaQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.VO1.collectionModel.selectedRow}"
selectionListener="#{bindings.VO1.collectionModel.makeCurrent}"
rowSelection="single" id="resId1">
Operation buttons code like:
<af:commandToolbarButton text="Update" id="ctb2" action="editDAF"/>
Any suggestion will be great help.
Thanks,
zeroxinHi,
create an attribute binding in the PageDef file for the status field. Then setup the button PartialTriggers property to point to the table ID. The button's disabled property then points to the status attribute binding like
#{bindings.statusField.inputValue=='value'}
Frank -
Enabling/disabling buttons problem
Hello,
I'm using jdev 10.1.3.3.0 and I want to enable/disable buttons based on the value in a tableSelectOne. I wrote a function isNextButtonEnabled() in my backing bean and I have set the disabled option of the nextButton (=CoreCommandButton) to #{!backing_bean.nextButtonEnabled}. Then I putted the autoSubmit option of the TableSelectOne to true and made a partialTrigger on the nextButton to the TableSelectOne. In the print statements everything is fine, but it is never displayed.
Does anyone know what to do about this.Well,
the nextButton is in a cellFormat which on itself is in a HtmlRowLayout. I putted partial triggers on the cellformat, the rowLayout and the panelPage to the TableSelectOne, but this doesn't do the trick neither. Strange. -
Enable disable linkbar links in datagrid itemrenderer.
Hi All,
I have to show the linkbar in datagrid column as a renderer and enable and disable the links according to attached documents codes.
here are my sample code
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="init();">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
[Bindable]
public var arrColl:ArrayCollection = new ArrayCollection();
public function init():void{
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
arrColl.addItem(["1,2,3","1,2"]);
arrColl.addItem(["1,2,3", "1,3"]);
]]>
</mx:Script>
<mx:DataGrid id="dg" dataProvider="{arrColl}" width="200" height="500" x="510" y="168" >
<mx:columns>
<mx:DataGridColumn itemRenderer="assets.components.linkbarItemRenderer" />
</mx:columns>
</mx:DataGrid>
</mx:Application>
My item renderer linkbarItemRenderer.mxml as
<?xml version="1.0" encoding="utf-8"?>
<mx:HBox xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" creationComplete="init();" >
<mx:Script>
<![CDATA[
import mx.controls.LinkButton;
import mx.collections.ArrayCollection;
import mx.controls.Alert;
[Bindable] public var arrColl : ArrayCollection = new ArrayCollection();
public var arrDocType : ArrayCollection = new ArrayCollection([{data:"1" , label:"AP"},{data:"2" , label:"AR"},{data:"3" , label:"BOL"}]);
public var attDoccodes : Array;
public function init():void
try
var requiredDoc :String = data[0];
var attachDoc : String = data[1];
var reqDocCodes :Array = requiredDoc.split(",");
attDoccodes = attachDoc.split(",");
if(reqDocCodes != null)
//add the links of required documents.
for(var i:int = 0 ; i<reqDocCodes.length; i++ )
var obj:Object = new Object();
for(var j : int = 0; j < arrDocType.length; j++)
if(arrDocType.getItemAt(j).data == reqDocCodes[i])
obj.label = arrDocType.getItemAt(j).label;
obj.data = reqDocCodes[i];
arrColl.addItem(obj);
callLater(enableDisalbeLinks);
catch(error:Error)
Alert.show("error ::"+error.getStackTrace());
public function enableDisalbeLinks():void
try
//disable all links first
for(var q:int=0; q< arrColl.length; q++)
LinkButton(linkBarId.getChildAt(q)).enabled = false;
if(attDoccodes != null)
for(var k:int = 0; k<attDoccodes.length; k++)
for(var l:int = 0 ; l<arrColl.length; l++)
if(arrColl.getItemAt(l).data == attDoccodes[k])
LinkButton(linkBarId.getChildAt(l)).enabled = true;
catch(error:Error)
Alert.show("error ::"+error.getStackTrace());
]]>
</mx:Script>
<mx:LinkBar id="linkBarId" dataProvider="{arrColl}" />
</mx:HBox>
It renderes the link in correct form in datagrid first time.when i scroll the datagrid the rows are miss up with each other and links are not shown propers in enable/disable format.
Thanks,
Amol.Hi All,
It was my fault. Got it work now.
When I redirect to PR, it also calls my page initialization method and clear all data. I added a parameter and issue resolved.
Thanks & Regards,
KJ -
Use rich:fileUpload/ to enable/disable my buttons with checking file names
Hello!
I need to upload some files with using <rich:fileUpload>,and i did it but i need to check file names for some reasons and enable or disable upload button but my problem is that when i open my modal panel and click add button of <rich:fileUpload> and then add upload button of <rich:fileUpload>(not my upload button but upload button wich <rich:fileupload> has) i check file name but the button is not enable/disable until i close my modal panel and open it agin,so i need to know how to modify my code to make it work?
<rich:modalPanel id="uploadFile" autosized="true" resizeable="false">
<f:facet name="header">
<h:panelGroup>
<h:outputText value="uploadFiles"></h:outputText>
</h:panelGroup>
</f:facet>
<h:form>
<rich:fileUpload maxFilesQuantity="#{uploadBean.maxUploadFiles}" allowFlash="true" fileUploadListener="#{uploadBean.uploadListener}" immediateUpload="false"/>
<table>
<tr>
<td><h:commandButton disabled="#{!uploadBean.xlsNameValid}" rendered="#{!uploadBean.admin}" action="#{uploadBean.upload}" value="upload" /></td>
<td><h:commandButton action="#{uploadBean.clearFiles}" value="cancel" id="cancel"/></td>
</tr>
</table>
</h:form>
<rich:componentControl for="uploadFile" attachTo="cancel" operation="hide" event="onclick"/>
</rich:modalPanel>No the problem is that file is being checked on server side, but if file is invalid the button Upload(my button ,not standart rich:fileUpload) must be disbaled,and shown,but i have to close this modal panel and open it again to see my button enabled/disabled
-
How to enable /disable a command Button based on a table's selectOne choice
Hi everyone.
I am using JDeveloper 10.1.3.3 and wish to enable / disable a commandButton based on the user's selection of the selectOne radio button.
The idea is that a row of a table may have an associated document so I want to enable or disable the button that downloads it based n the current row selected.
I have followed the advice on problem with table I defined my selectOne component as follows :
<af:tableSelectOne text="#{res['tables.selectionFacet.title']}"
autoSubmit="true"
attributeChangeListener="#{backing_browseCVs.onSelectionChange}">The function inside the backing bean looks like this
public void onSelectionChange(AttributeChangeEvent attributeChangeEvent)
// access the faces context
FacesContext fc = FacesContext.getCurrentInstance();
// get value of the expression #{row.hasCVDocument} that indicates
// if a document has been added
ValueBinding vb =
fc.getApplication().createValueBinding("#{row.hasCVDocument}");
Boolean hasDoc = (Boolean)vb.getValue(fc);
// enable the doownload button accordingly
downloadCVDocBtn.setDisabled(!hasDoc);
}My problem is that the method never fires. I have placed a breakpoint at the first line but it is never reached.
Any advice will be most welcome.
ThanassisHi,
You might need to add 'dataProvider' part in the expression language in your selectionListener:
#{bindings.CVList.currentRow.[b]dataProvider.hasCVDocument}
#{bindings.CVList.currentRow} returns an instance of ViewRowImpl which does not have 'getHasCVDocument()' method, but does have:
Object getCurrentRow()
method, which returns objects from your CVList list, which do have getHasCVDocument() method...
Expression language is resolved through reflection, so when you write:
#{processScope.someClass.someReferencedClass.someAttribute} it is something like:
Get someClass from processScope map, then:
someClass.getSomeReferencedClass().getSomeAttribute()
It's a bit more complex but you get the idea.
Vladimir -
Hi All
I have created an application wherein datablock is supposed to display 5 records at a time. In addition to it i have displayed 5 buttons alonside these records. But all the buttons are addresed by single name.
I want to change the enable/disable property of the button in such a way that only those buttons get disabled where records value match with those given by me in procedure.
Since all the buttons are having same name i am not able to target button corresponding to specific record.
I will make the problem more clear:
This is how my GUI looks
Record1.element1 Record1.element2 Button1
Record2.element1 Record2.element2 Button1
Record3.element1 Record3.element2 Button1
Record4.element1 Record4.element2 Button1
Record5.element1 Record5.element2 Button1
I want to disable button1 only corresponding to the record3.
Can anyone help me out in this regard?Thanks Roel for your reply. I had already designed the way you mentioned(by using 1 button) but this is not the way application should look.
Also I have to work on this application using designer only, that is the reason i have posted it in Designer forum so that i could get any clue as to how i have to proceed using designer. -
Screen Personas 2.0 Enable/Disable script button in Javascript
Hi,
Has anyone tried enabling or disabling script buttons on a flavor using Javascript. I have two script buttons,
The first one (Button1) searches for a contract based on the contract id provided by the user in a text box. (So, the script triggers the transaction me33k, fetches and displays the relevant fields in the flavor)
Now, based on whether the contract is present in the system the user needs to click another script button (Button2) which will allow him to create an order. Currently the button is disabled (ScriptButton.IsEnabled = false in the Properties menu).
In the Button1 script towards the end, I need to enable Button2 is a contract is found. So in the Button1 script, at the final step I try to calculate in JS and write the following JS code,
var args.btn2id = document.getElementById("Personas/blahblahblah");
args.btn2id.disabled = false;
But this is never works. And I have noticed that the control id does not return the control object in Javascript (so, args.btn2id is always null) and I tried removing the '/' and various other options.
Has anyone ever tried to enable/disable buttons in Personas? Is it even possible?
AbhijeetYou don't have access to the Personas control properties from JavaScript to dynamically change them.
About the only thing that comes to mind is Tobias' method to hide the script button if you want to disable it.
Maybe you are looking for
-
Transaction VA01 separate LUW / commit DB when creating in Background PO
Hi experts, I have a request to create a PO for a particular item of a sales document, and for the PO created I need to fill one component and to lock it. I found out that the only way to create for sure a PO is the FM BAPI_ORDER_CREATE. To update th
-
I'm looking at trying to produce a basic track changes report for a document. I have had a quick look at the track changes section of the scripting user guide, and while i appeart to get all sorts of information about the change but actually using it
-
I bought the correct cord with the 3 video outputs and the 2 audio but my tv only comes with 1 video input and the color is yellow I only get black and white video do I have to own a HD tv or something to get color video?
-
Hi, We have ESS deployed on EP7.0, so we are using the WebDynpro version of ESS. Now we want to redirect the navigation to our own customized iView when click "Exit" button on any of the ESS iView, for example , address iView. I guess this should be
-
Business Partner address in GTS is "garbage" characters
We are testing our upgraded ECC 6.0 system and if a customer master in ECC has an international version maintained (Kanji) the business partner address in GTS (version 7.1) has garbage characters for that business partner. Do I need to make an adju