Button rollover changes backgorund

Is there a way to make it so when you rollover a button it changes the background in muse? I'm wanting an opening page that lets users go to three main pages based on what they are initially looking for. My major idea is, when the button has rollover the whole background and color scheme of the page changes to fit the style of that particular topic (i.e. Business look and picture of a guy in a suit for the "Professional" selection, laid back feel and picture of someone in their home for a "Personal" selection, ect.). If this is possible please help me out.

You can try tabbed panel with show content on roll over action, 100% width can be applied on tabbed panel.
Thanks,
Sanjit

Similar Messages

Making a button rollover change a movie clip's frame

Hi again everyone,
I knew how to do this in AS2 but now I am having problems
with making a button on the stage goto a frame in a movie clip on
the stage.
I've attached a sample of my code below, hopefully you'll see
the error and be able to point it out to me?
I have a movie clip on the stage that has different
information in different frames. I want to make it so that when
someone rolls over the button, the movie clip fades in and goes to
the correct frame to display the information.
With this setup the way it is below, I keep getting "Warning:
3590: void used where a Boolean value was expected. The expression
will be type coerced to Boolean.
I know where the problem is happening, "function
XXX(event:MouseEvent):void {navigateToURL(XXXweb)}"
How can I write this differently and eliminate this problem?
Thanks,
Jeremiah

I'll give that a shot, thanks!
A follow up question to that one, is there a way to make it
so that I can have one rolled over function applied to several
buttons / frames in the movie clip? This movie clip has 50+ frames
in it and if I could reduce my coding, it would make life a lot
easier.
Thanks,
Jeremiah

PSD Rollover Button with image in front stops button from changing state

I have a wide PSD button that changes state when rolled over. I would like to place a PNG image with transparency in some areas over the top of it so that the rollover button shows through the transparent areas of the PNG.
How can you get it to do the rollover effect when the user mouses over the bit of the button that the image is in front of? Is ther a way of making the PNG 'invisible' to the mouse?
I know I could redesign the button so that it includes the image but I'm trying to keep file sizes and load times to a minimum, I use this button a lot on my website with a different on each, and having that number of individual buttons would result in a bloated, slow-loading website.

Hi Abhishek
Thanks for your reply. I was able to achieve the effect I wanted by having the PNG and the PSD Button with the same link and then grouping them. This means I can mouse over the PNG and still get the PSD rollover effect, which is perfect.
However I also have another similar problem. I have some different PSD Rollover Buttons which have some text in front of them (basically it's the button label). On some of these buttons when you roll over the text it prevents the rollover state of the button, and on other buttons the rollover effect occurs as it should, and there doesn't appear to be any consistency about which does what. Grouping or ungrouping doesn't appear to make a difference. Can you help?

How to use one button rollover symbol to create 100 graphically different buttons

I do know how to create a button rollover symbol.
I don't know how to make that button rollover symbol reuseable. I'd like to put 100 different images in 100 copies of the button. I'd rather not make new symbols for every button, since the rollover animation may change.
Symbol "Accessibility" allows the title to be changed for copies of the symbol. Does similar functionality exist for bitmaps used in the symbol?
Could the copied button bring in new graphics from the timeline in another symbol or a xml sheet?
Any help would be greatly appreciated. I've been following tutorials, except none of them cover this situation.
Thanks for your help!

Created in EA version 3:
I have 2 samples for you that are very similar.
1- uses the symbol with no image and loads the image as a background-image for the div.
https://app.box.com/s/co7uki3fm3b11a3o1xjw
2- uses an image in the symbol and replaces this image with a new one in the img (not div)
https://app.box.com/s/3ms92f5cv0mylspsi5uo
Choose what you prefer.
3. An example with more elements in the symbol directly on the stage instead of a container. use a container if you want to place the symbols in a specific rectangle div for example.
https://app.box.com/s/y92bpo82kncxnn2w567y

Button Rollover keeps shifting on hover - Firefox only

Hi there,
I have a shopping cart button rollover that keeps on shifting
a few pixels whenever you roll over it. Strangely, this only
happens in Firefox. The page can be
found here
The button is being called from a template .
located
here.
I also tried putting the button directly into the original
page, just to see if it was a problem with the template, and it
still shifted.
Any ideas?
* EDIT *
I think it was an extra <tr> tag floating in the table.
However, now I'm getting an error in IE although it renders fine.
Sigh.

Have you considered using "set text of layer" (could be "set
text of
container")?
"Jesse Feyereisen" <[email protected]> wrote
in message
news:gc0fue$73o$[email protected]..
> Im sure this is Dreamweaver 101 but I just cant seem to
find it. Im a
> graphic
> Designer new to Web so please bare with me. Here is what
I need to do"
>
> I would like to make rollover buttons that when you
hover over them with
> the
> mouse, not only does the button change (the rollover
part), but they also
> can
> hide/unhide a separate image that is near them. I've got
the rollover
> part
> down no problem, but the 2nd image thing is stumping me.
>
> Example:
> Image of a TV on the webpage that when you roll over the
"channel"
> buttons,
> they highlight AND the image on the TV screen changes to
show and example
> of
> that specific channel.
>
> Any help is greatly appreciated.
>
> Thanks, Jesse?
>

Syncing Button Rollover States

I'm building a website for myself (currently with the Muse trial, but I am planning to buy), and I have a question regarding button rollover states. The site I'm building is an architectural photography website, and the general portfolio page has a list of subcategories in the left-side menu bar. However, I also want to have thumbnail links to each of the subcategories in the main body of the website (see image provided). The thumbnails are for the Educational and Municipal subcategories. I have currently set up the rollover states for all the links in the left-side menu (to turn to the light blue that is seen on the active state of the Portfolio button), and I've set the rollover states for the thumbnails (to go to 50% opacity). Is there a way for me to synchronize these rollover states? I would like to see a thumbnail respond in its rollover state if I roll over its corresponding button in the left-side menu, and vice versa.
Thanks!
Rob

Hi,
To accomplish that you can use the composition tool tip. A transparent triger can be placed where your menu item is and the target will be on the image with an opacity of the 50%.
However, this will only work in one direction and will not change the menu item when you roll over to the image.
Regards,

How to create a radio button that changes colors

I'm using Acrobat X and ID CS5 on Mac OS X.
A couple of years ago someone on the forums explained to me how to create a button that changes color with each click. You can view a sample PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle.pdf. They gave me the document JS and showed me how to set the properties of the button. I've integrated the button into a particular series of PDF forms and it's worked out very well.
Now I would like to do the same thing, but using a circle instead of a square. Can anyone tell me the best way to do this? Can I somehow set a radio button to cycle through colors in the same way? I design my forms initially in ID CS5 and then activate and format the fields in Acrobat X. I've tried using circles instead of squares in my ID document, but when I export to an interactive PDF, they're converted to squares.
Any ideas?

I understand how to make buttons cycle through colors-- the problem I'm having is that I'm trying to figure out how to make a circular button cycle through colors. When I export my ID document to PDF, my round button maintains it's original appearance, but when I click on it to cycle through the colors, it behaves like a square (see new PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle2.pdf).
If I use a radio button, I can get it to cycle through colors, but I don't want it to have a black dot in the middle. Is there a way to format the radio button to not show the black dot when clicked?

Fm11 does not have the buttons to change from XML to WYSIWYG views

Hi, my Fm11 does not have the buttons to change from XML to WYSIWYG views. It only has the WYSIWYG view, and it does not have the Structure Tools,DITA, S1000D menu options.
In File>New, there is not XML option neither…. What am I doing wrong? Thanks

Hi Arnis, Thank you very much for your help, that was it !!! Greetings from Mexico

What is the button to change the variant in alv?

Hi guys,
can u tell me is there any button to change the variant in alv?. what is tanscation varient in report , hw it will used.

Hi
The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
<b>2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE</b>
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
<b>1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT</b>
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

The middle button to change screens does not operate. How to fix?

the middle button to change screens does not operate. How to fix?

type "home button unresponsive" in the support box at the top of this page. You'll get the information that you need.

Can't select buttons to change text

I set up chapters in I-Movie and exported the project to I-DVD.
When I go to a chapter screen it will highlight the lower right button and allow me to change its text, button shape etc., but I cannot access the other buttons to change text.
I tried changing the mouse click speed as instructed, no luck.
I tried changing the the chapter titles in I-Movie but that only posted the top text line.
Any ideas as to why I can't select these chapter buttons to change text?

This is what I had to do to change text on buttons.
I could only change the text on the lower right chapter button.
Then moved the button up, left, whichever, to cause a new button to fall into the "prized" lower right spot. I could then change the text on that button. So on and so forth.
The major problem is that the buttons, now with the correct text, are all out of order. It now became some kind of torture to find the right combo of moves to get the buttons back in the same order. I'd advise saving backup if you decide it's not worth the work.
For transitions I used the "select all button" option in "Edit" to avoid the torture test.
Once this project is done I'm reloading IDVD but maybe this will help somebody in the meantime.
Good luck

Does a 2-button reset change or delete ANY settings?

Does a 2-button reset change or delete ANY settings?

No it does not remove or change any settings, apps, or data.

Getting a button to change a variable in AS 3.0?

I used to be able to do this in AS 2.0 but 3.0 has got me
stumped. Here's what's not working:
first I set a variable in my main timeline:
=====================
var carpetChoice:Number = 1;
=====================
then I set up an eventListener for the nested MC to
goToAndStop at the frame set by the variable:
=====================
this.mc_420.mc_420Carpet.addEventListener(Event.ENTER_FRAME,
carpet420);
function carpet420(movieclip:Event):void {
this.mc_420.mc_420Carpet.gotoAndStop(carpetChoice);
=====================
So far so good. I've tested to make sure it worked so far by
changing the original declared variable and the nested MC DID go to
the appropriate frame.
Now the problem! I try to set up an eventListener a button to
change that variable (thus controlling the nested MC) but I'm
making a mistake cause IT DON'T WORK!!
=====================
this.mc_swatchTab.mc_swatchScrollMenu.btn_swatchCarpet002.addEventListener(MouseEvent.CLIC K,
carpetVar002);
function carpetVar002(event:MouseEvent):void {
root.carpetChoice:Number = 2;
=====================
How can I make this work in AS 3.0?
thanks,
Pat

quote:
Originally posted by:
kglad
lol, flash was confused?
Ok... maybe I caused some confusion? In my nested MC, first I
added some animation and keyframes and THEN I went back to name the
instances. This caused multiple instances with the same name along
my timeline thus "cunfusing" flash.
My bad!
live and learn! (hehe)
Pat

Unable to disable Save and Cancel button on change user answer form

Hi,
I am not able to disable Save and Cancel button on change user answer form depending on a condition. Any kind of help will be appreciated.
Thanks

save and cancel are the default buttons
check the disable default buttons...
Nsankar

Button rollover animation repeats

I have an animation for a button rollover that is repeating
after the mouse is released. Is there a way for me to stop this and
have the animation play on the rollover only?

Thanks again. I'm getting closer! I used to have 2 rollover
repeats. The first was as you left the current page, the second
just after arriving at the new page. The on(rollOut) got rid of the
second one, but I still have a repeat immediately after release.
AmI putting the code in the right place? Here's the action script I
have for the button:
on (release) {
gotoAndPlay("HoAbout");
on(release){
_global.btnVar = true;
on(rollOut){
_global.btnVar = false;

Button rollover changes backgorund

Similar Messages

Maybe you are looking for