Button visible

Hello,
How can i make a button visible if a shared variable is true and not visible if that same varable is false...?? is this possible??

Romain_H wrote:
I would like to do the same but the problem is i have to run the vi each time.
If you want to switch visibility with a FP control while the VI is in edit mode, you can make an xcontrol consisting of a button and a switch for its visibility.
Typically, you should design your VI such that it always runs during use. It can be in a wait state when it's not supposed to do anything.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Making a button visible upon closing a document

Kind of a weird question, but is there a way to make a button visible upon closing a document? Here's my situation. I want users to click a link which will open a PDF. I then want the users to take a quiz based off of the information in the PDF. Is there a way to have the users click the link to open the PDF, then a button to start a quiz becomes visible when the users close the PDF? I have a feeling it's probably not possible, but I figured I'd check. Thanks.

I was actually able to find a bit of a workaround. I created an advanced action to open the PDF and show the button (it was hidden to begin with) once I click the hyperlink. It's not exactly what I wanted to do, but I think it'll suffice until I figure out a way to show the button upon closing the PDF. I'll look into the java scripting, even though I'm not really a coder. Thanks!

How do you get out of Full Screen mode in Excel? No red or yellow buttons visible.

How do you get out of Full Screen mode in Excel? No red or yellow buttons visible. Using just installed Yosemite iOS 10.10.2

I Don't think Microsoft updated it for those buttons. Look for a blue button with arrows in it on the right side of the menu bar.
Also try Esc key.

I want make my button visible or invisible on click of button

Hi All
I want make my button visible or invisible on click of button.
Regards
Kirankumar M

HI Kiran,
Your Question:
onclick button should be visible and on second click it should become invisible.
Answer:
In your View
1.Add Two button using Apply Template--actionButton
So two buttons will get added to the view
2.Create an attribute in View Context say buttonset of type com.sap.ide.webdynpro.uielementdefinitions.Visibility
Bind the visible property of second button to buttonset attribute
This attribute is to set visibility
Also create a booloean attribute bool in the View context
3.In DoInit method
wdContext.currentContextElement().setBool(true);
So that both buttons are visible in View initially
4.In First button event handler onActionButton()
call second button eventhandler onActionButton_0()
public void onActionButton(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionButton(ServerEvent)
       onActionButton_0(wdEvent);
    //@@end
Here onActionButton_0() is like one method which is actually making second button visible or invisible based on boolean value bool=true /bool=false
5. Write the following code in onActionButton_0() to perform the actual action
    if(wdContext.currentContextElement().getBool()==true){
            wdContext.currentContextElement().setButtonset(WDVisibility.NONE);
            wdContext.currentContextElement().setBool(false);
else{
       wdContext.currentContextElement().setButtonset(WDVisibility.VISIBLE);
                  wdContext.currentContextElement().setBool(true);
6.Now build and deploy ans run your application.
It works..
Nice Question..
I was excited trying this...
Hope it helps You
Regards,
Archana
Edited by: Archana CTS on Mar 19, 2009 2:08 PM

Problem making buttons visible

Hi there, I have a poker game that all worked fine until I was told to restructure it in a MVC style. I never had this problem before I changed it but I'm having issues with making my buttons visible when it's the players turn. At first I setVisible to false which works fine, then I call my method to display them from my model and they display fine, so seemings as all is good to here I think it's the next bit that's causing my issue, I have actionListeners attached that when fired setsVisible on all the buttons to false again (which works) but the next time I call my method to make certain buttons visible they don't appear. I've tested that the method is being called with the correct parameter passed and it is. Now I must apologise because my knowledge of swing is very poor but I have searched and read alot and tried several approaches with no joy, I will definitly be studying up more on it in the future but time is against me at the mo. The only thing that seems to half work is if I use this.paint(g) the buttons display as I want them but my program crashes cos to be honest I don't know what g should be. Is this the right approach or is there a more simple way I can update my GUI to display my buttons?

Works for me but you could try to add a revalidate(); repaint(); on the buttons parent.
import java.awt.BorderLayout;
import java.awt.EventQueue;
import java.awt.event.ActionEvent;
import javax.swing.AbstractAction;
import javax.swing.JButton;
import javax.swing.JFrame;
public class TestVisible {
    public static void main(String[] args) {
        EventQueue.invokeLater(new Runnable() {
            public void run() {
                final JButton button = new JButton("I do nothing");
                final JFrame frame = new JFrame("Test");
                frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
                frame.getContentPane().add(button);
                frame.getContentPane().add(new JButton(new AbstractAction("Toggle") {
                    @Override
                    public void actionPerformed(ActionEvent e) {
                        button.setVisible(!button.isVisible());
//                        frame.getRootPane().revalidate();
//                        frame.getRootPane().repaint();
                }), BorderLayout.PAGE_START);
                frame.pack();
                frame.setLocationRelativeTo(null);
                frame.setVisible(true);
}

Harcopy button visible title bar

Hello,
sometimes I see in some VI's a Hardcopy button visible in the window title bar (on the left of minimize/maximize and close button) but I fonud now way to configure this!
Maybe this is a Windows functionality, but does some know how to setup this?

I think you're referring to this:
http://404techsupport.wordpress.com/2008/04/02/configuring-hardcopy-to-do-everything-you-want-and-mo...

I can't get back to my homepage after surfing the web. no back button visible

back button not working to get back to homepage after surfing the web

If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.<br />
Make sure that you have the Navigation Toolbar toolbar visible.
*View > Toolbars > [X] Navigation Toolbar
* If items are missing then see if you can find them in the "View > Toolbars > Customize" window
* If you see a missing item in the Customize window then drag it back from the Customize window onto one of the toolbars.
* If you do not see that item in "View > Toolbars > Customize" then click the "Restore Default Set" button.
See also:
* http://kb.mozillazine.org/Toolbar_customization

JavaScript to make button invisible button visible again

Hi
I have been trying to create a form in LiveCycle Designer (part of Acrobat Pro ) that keeps a button (call it #1)invisible until another button (call it #2) is clicked, at which click event the invisible button(#1) becomes visible. I've been using JavaScript and either setting the #1's presence as "invisible" in the object editor or scripting it as a formready event presence = "invisible". I've scripted in the click event for #2: #1.presence = "visible". This doesn't work to get #1 to show on #2's click. I've tried a few more similar script with no success.
I'm relatively new to Designer, though have some experience with JS.
Is there another way to script to initially make an object "invisible" and get it to become visible by a runtime event?
I would appreciate any help.
Kind Regards,
Stephen

Template needs to be saved as Dynamic in order to see those dynamic features working. You have that saved as Dynamic and still have no luck try the following....
#1.presence = "visible";
xfa.layout.relayout();
Note: 1. A button name can not start with "#" hope you are using some meaningful names.

Only half of install button visible in app store for two apps

Only for 2 apps that may have been removed accidentaly (by my son) the install button in the app store is only partly visible, grey, and does not respond to clicking.
Hard reset didn't help. Just before this happened i updated from ios5 to 6.
Please advise how to get these apps back.

I just figured out that it has everything to do with the restrictions that I had set up for my children. I had set it up for the apps to be for 9+ and the ones that had half an install button that was greyed out were for older. Hope that help!

Quick question - making button visible if two conditions are met

I simply want a button to be visible is once condition is true and another condition is false. Shouldn't this line of code work?
<mx:Button id="Btn"label="
Submit"color="
#FF0000"enabled="
{islRequired}" visible="
{!.isAdmin} {isRequired}"
click="submit()"
/>
isadmin = false
isrequired = true
the button should be visible
Am I missing something?

Maybe you miss OR (||) or AND (&&), but I never use at mxml
visible="{!.isAdmin && isRequired}"
Works?
Best Regards,
Miguel

Use CheckBox to make Submit Button visible

I am making a form with LifeCycle Designer and want a check box that says basically "I accept these terms". Users have to check it before submitting. I thought perhaps I could make the submit button invisible and code the check box with something like
if (this.getField("MyCheckBox").value; == 1)
{EmailSubmitButton1.presence = "visible"};
but I'm not sure of the script or where to place it to get it to work. Any ideas?
Thanks,
Karen

View the following images for some help...
1) http://img225.imageshack.us/my.php?image=designer1bg0.jpg
You need to expand the code portion of the interface if you haven't already done so, by clicking on the arrow (part circled in red) shown in the image.
2) http://img219.imageshack.us/my.php?image=designer2wb0.jpg
When you have your object highlighted (in my example I dragged a button on, you should choose the checkbox on your form) choose "change" from the event dropdown.
3) http://img225.imageshack.us/my.php?image=designer3ik6.jpg
Enter your code in the provided space, make sure your language is set to JavaScript and not FormCalc (dropdown circled in red).

Screen Personas: Create or control button visibility dynamically

Hi,
In Screen Personas, would it be possible to do the following with use of scripting functionality,
1. Dynamically create controls e.g. buttons and assign actions to them
2. Control Field Visibility( for GUI fields or Persona fields) at runtime
Regards,
Jeron

Hi Tobias,
Thanks for clarifying. We are currently evaluating Screen Personas for use in SAP DMS.
Scenario we are trying to simplify is the workflow process in DMS. A DIR(Document) in DMS, has a status field with various values such as
1. Initial Draft
2. Submit for Approval
3. Approved
4. Rejected
5. Archive
6. Retire etc...
Users, have to pick right status values from an F4 pop-up to pass document along the business process. This is not very intuitive and we would like to provide buttons on screen corresponding to each valid status that can be selected at that point in time. When a button is selected say, "Approve" or "Reject" the corresponding status value should be filled up in the standard status(hidden) field.
We have numerous doc types and too many status values. Hence, the static approach of defining buttons in Personas does not scale up and is not support friendly.
I hope i have been able to explain the scenario correctly. If required, i am open to having a call and can elaborate this in detail.
Regards,
Jeron

Quick Question about Button Visibility!

I have a form, and I only want the "submit" button to show up after the user has checked a checkbox. I have it showing and hiding by applying this code the check box "Click" event.
if (this.rawValue == "1")
EmailSubmitButton1.presence = "visible";
else
EmailSubmitButton1.presence = "invisible";
But the thing is, I want the button to be invisible initially, whenever i do that tough, I've tried different things, it never reapears when the box is checked.

Make sure your form is saved as a dynamic form.

ComboBox drop down button - visibility

Is there anyway that I can make the drop-down button on a combobox visible and not visible?
Cheers for any help,
Tom.

try this, not sure it will work but hey..
String[] items = {"A", "B", "C", "D"};
JComboBox combo = new JComboBox(items);
ComboBoxUI cui = combo.getUI();
cui.setPopUpVisible(combo, false); // sets popup visible to false
cui.setPopUpVisible(combo, true); // set popup visible to trueEnjoy!
Although ready over your post you just want the button removed, hmm never mind, try it.

Accept Changes button visible in Approval link but not in Check Status

Dear Experts,
We are on SRM 4.0 .
After a SC is rejected partially the requester can see the SC under Check Status link with the status In Your Inbox
When the user clicks on the Detail icon, there is only CHANGE button but when the user clicks on Approval Link
he can see Description as 'Your Shopping Cart xxxxxxxxx was change/rejected in part.Please Check' and when he click on the Detail icon there are two buttons at botton Accept Changes and Change .
Why is the Accept Changes button not there in detail display of SC under check status link?
Thanks,
Anubhav

Hello,
This is the standard behaviour of SRM4.0.
When a SC has been partially rejected the the SC goes to the requestor approval inbox. Requestor can either accept the change or he/she can change the SC and order again.
If requestor accept the change that means requestor has been accept the rejection, so requestor will not be able to create the PO for that line item. He/she needs to change the SC depending on the approval note and order again.
Check status transation is used for check the status of the shopping carts. Due to that reason the Accept change button is not exist there.
Regards,
Anindya

Button visible

Similar Messages

Maybe you are looking for