ButtonBar and ProgressBar all in one
Anybody have any idea how this ButtonBar + ProgressBar type
of component was created?
(See the InsuriCorp example, second one down)
http://www.adobe.com/devnet/flex/articles/fig_pt6_05.html
It's really great looking but I'm really not sure how they
went about it.
What's the best way to approach this? Mabye a Flash skin, or
a custom effect, or is there a really easy way that I'm just not
seeing?
Unfortunately, no.
Similar Messages
-
How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.
Okay, I haven't found a way to add an extra space using Find/replace, but you might be able to add some text wrap to the check boxes that will push the text away from them.
Open Find/Replace and click the Object tab.
Click the Specify attributes to find button to the right of the Find Object Format: field.
Under Basic Attributes, choose Stroke and then the Black swatch (assuming the black swatch is applied to the strokes of your check boxes). If there are no other stand-alone objects in your form with a Black stroke, this should be all you need. (If there are Black strokes on your table cells, they will be ignored.)
Click OK
Click the Specify attributes to change button to the right of the Change Object Format: field.
Under Basic Attributes, choose Text Wrap & Other > Text Wrap > Type: > Wrap around bounding box (2nd button from left)
Under Offset, set a Right offset at the distance you'd like to add (I don't know what units you use, but the 3-5 points might work for your purposes...might take some trial-and-error to get it where you want)
Click OK
Click Change All -
HT5767 how do I take all inbox messages [ 3000 ] and deleate all at one time ?
how do I take all inbox messages [ 3000 ] and deleate all at one time ?
Go to icloud.com, open Mail, then select them in batches (click the first message, scroll down, shift-click the last message) and press your delete key. The server usually has problems deleting that many at once, so you should try a smaller number, say 500, and delete them in batches.
-
Solution centre not working for windows 7 and wireless all in one, altho can print ok
I have installed an officejet 6500 wireless all in one on my HP Elitebook running Windows 7 64 bit.
Although the printer installed - albeit with an error for Microsoft.net4 that was resolved after a re reboot - HP Solution Centre v14 wont start. Indicated device installation wasnt complete, plugged in USB and tried to uninstall/re-install all same thing.
Ran Network, scan and print utilities and have MacAfee and firewalls all dis-abled during install. After the error pop up it just closes.
The printer works fine and I can scan through the webscan option but what's happened to solution centre?Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Windows 7 and HP All in One Printers
Have you just brought a new PC with Windows 7 or upgraded from Windows Vista and now having problems with your Printer / All in One.
1) Are you running the latest version of HP Software designed for Windows 7?
Please go to Hp.com and choose Support and Drivers
then type in your printer model number and follow the directions on the page.
2) Do you print but nothing comes out the printer, and the job just disappears from the spooler?
The fix is available here
Usb Connected Printer
This fix is about USB Connection but the method can also be used for a Network Connection too
3) Can you scan but your Scanned files just disappear, not in the directory you thought they should be.
The fix is available here
Cannot find scanned image or document files after scanning completes.
4) Does HP Solution Center say that your printer is no longer installed?
The fix is only applicable for people who have upgraded from Vista to Windows 7
HP Print Software Patch When Upgrading Vista to Windows 7
This patch will fix known problems with the following features and functionality:
HP Print Status
Toolbox
Ink Levels
Solution Center
HP Scan (All-in-One)
Front panel scan button (All-in-One)
5) Did your network printer disappear for no reason maybe after you ran a windows update ?
You may have found a thread that talks about this problem, this thread says disabling HP Device Discovery fixes the problem. I do not recommend this as it may cause other problem later.
I would recommend readding the missing printer using Add Device from the Start, HP (Printer Device Name) Menu Item.
If this problem presists please come back to the forum and inform us so we can look at this problem in more detail.
6) Are you just having general problems with install, printing, scanning or using your printer / all in one on a network (wired or wireless)?
You may have a problem that one of our Diagnostic tools can fix please see the Diagnostics Tread for detailed information about these tools.
HP Print and Scan Doctor
7) Are you having a problem that we have not covered?
First try the forum search to see if anyone else is having a similar problem.
If you have no luck start a new topic and wait to see if anyone else knows the answer.
JonW
I work for HPGreat information.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Adobe reader 9.3.1 and HP all in one 6310xi printing problem
Since I upgraded from adobe reader v8 to 9.3 I cannot print color or b/w documents on my hp all in one printer. I contacted HP support and they recommended that I install printer driver for a 990 printer and that my problem will be solved.
well I cannot print any adobe documents at all in either mode. I can print office documents fine.
do I need to download another adobe driver or add on ?
please help..
GeorgeHi,
Could you please elaborate more on your problem? What error message do you get when you try to print from Adobe Reader?
Is this problem specific to a printer or is it that you are not able to print on any printer using Reader?
Is it document specific?
Thanks,
-Shilpi -
Help with Epson and HP All-In-One Drivers
I've been looking through the forums for a day and not really finding what I'm looking for, so I decided to post...
Running an AE-N for a Macbook, a Powermac, and a Powerbook.
I've got two printers...an Epson R200 photo printer and an HP PSC 1410 All-In-One printer/scanner. I'm not worried about the scanning so much as the actual printing, both wirelessly and wired. I have no problem adding the printers...they pop up effortlessly in the printer setup through bonjour. But once I actually try to print to them, they endlessly search for the printer ("Looking for printer Epson R200"). Didn't think this would be a problem because they were found so easily by the AE.
I've read all the iFelix stuff posted and granted, I haven't tried the GIMP method just yet, but the R200 at least should be printing right out of the box, correct?
The printers are plugged into a USB hub and I've got an external HD plugged in as well...no problems with it. Any help would be appreciated...
JDHJohn Blanchard1 wrote:
Yes, but it's difficult to know what state the drivers are in after moving things over from Time Machine. Try deleting the /Library/Printers/hp folder and using Software Update to reinstall the current drivers. If that doesn't work, you can download the drivers here:
http://support.apple.com/kb/DL907
This is working. I had the same problem with Yosemite and found Hp drivers were not working properly.
No need to delete the HP folder in library- printers because there wasn't any directory. -
BI and the all in one solution
Hi
We have a situation where we we hqve many clients attched to one central BW system and then some customers wish to have a local installation (which we dont want to do due to many systems etc). So we are looking at the SAP ALL in one solution and i have been ased the question how easy will it be to just copy the existing production client in the central solution and use this as a template.
I have raised potential problems such as:-
we have many clients in the central one and we dont need these in the all in one just one for each client
many objects that we have in production thatis not needed
unwanted and old data flows (yes we havent cleaned it in a while)
however, can anyone else shed any light on the issues here. Please note thta is is not an alternative to reduce the client numbers in the main system etc.
Regards
AndrewHi,
Please check the following link first:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04473034&tmp_task=prodinfoCategory&cc=us&dlc=en...
and the following link shows how to install new patch:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04469325&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Image Capture and Samsung All-in-One SCX4825FN Preview Delay
I am trying to scan using a Samsung SCX4825FN all-in-one printer, scanner and fax machine. It is installed using an ethernet cable via my internal network. Two Macs see and scan with it without a problem. The third used to, but since I tried installing Samsung's own scan software (just to see if there were any OCR capability in it, which there wasn't), each time I try to open up the flatbed scanning, it takes hours (literally) to do the preview scan, and in the meantime, the computer is almost unusable. The printer (scanner) appears to correctly do the preview scan, then do a more detailed scan (at very high resolution?), which takes it ages, and it uses this to build the preview scan.
Other computers haven't changed, so I assume it is the since Mac that needs fixing. It also doesn't happen with the multi-sheet feeder scan on any of the computers, so it is only the flat-bed scan that causes the problem.
I have tried fixing permissions, removing the Samsung software completely (I then couldn't see the scanner at all) then reinstalling the minimal amount, deleting permissions for Image Capture and for the Samsung Scanning software, changing preferences within the Samsung software, but all to no avail. It still takes a couple of hours to complete the initial preview scan on the one computer but not the others. Has anyone got any other ideas?
I would like to delete the Samsung software off the problem Mac and then copy over the required drivers from another computer to let it scan without a problem using the standard Snow Leopard install, but I am not sure which files to copy over. I am worried that the (not very good) Samsung installation software is taking off more files than it is supposed to when I remove it, but I am not sure what it is supposed to leave on there, or perhaps it is leaving too much on there.
The nice installation software from Samsung forces a restart each time you try and do anything, as well as insisting that no other software is running while it is trying to make changes, so I am already a little unhappy about what kind of changes it is trying to make since most Apple software is not that crazy...Interestingly here is what I received from Brother. (Note that scanning using the Control Center works fine.):
Dear Brother Customer,
Thank you for taking the time to write to us.
Is your machine able to scan using the Brother ControlCenter software?
If you are able to scan with the ControlCenter, the drivers are
installed and working properly.
Your issue is with Apple's Image Capture software and should be referred
to them for support.
When you open the Apple software, you will need to click DEVICES in the
Menu Bar, then select the disclosure triangle next to TWAIN devices to
reveal the Brother TWAIN device.
Select the Brother TWAIN and click OK.
You should now be able to scan with Apple's Image Capture application.
For any additional assistance with the Apple application, we suggest you
contact Apple for assistance.
We hope this information will be useful to you. If we can be of further
assistance, please let us know.
Best Regards,
MFC Macintosh Support
Brother International, USA
Email: [email protected]
So, who owns the problem: Brother or Apple? If I go to the Apple Store I see Canon and HP scannners for sale but not Brother. Maybe that is part of the problem. Corporate relations between Brother and Apple. -
Printing from Internet with Vista and Hp all in one 1610
I have a new computer and installed my HP all in one 1610 printer. The printer works perfectly well when I print from Microsoft Office but not from internet explorer. I have tried diagnostics and reinstalled printer drivers but no success. The print job goes to the print queue and disappears as if it is printed but the printer does not print. Any suggestions?
Just curious, have you tried printing from another browser? Cos if you're able to print from other applications, and not from IE, then I don't think it is a printer problem, but rather a problem with IE.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee. -
Is there an Apple hardware unit that combines a Modem and an Airport All-in-one?
This would save energy, space and clutter.
ThanksUnfortunately, no.
-
Image Capture and Brother all in one printer...help!
Hello,
I have a Brother all-in-one printer MFC-420CN. I just upgraded from a PC to a Mac. Almost everything works perfectly...I can print (wirelessly or not), send faxes, and scan using Brother's own Control Center utility. However, I wanted to use the printer also with Image Capture. I downloaded the scanner driver from the Brother site, however when I start image capture I get the message "No Image Capture device connected". If I go to Devices => Browse Devices, I can actually see the printer driver shown as TWAIN Data Sources/Brother Twain, however it doesn't show as being connected. If I click on the "Use Twain UI" button, it brings up a Brother Twain window, but if I click Scan nothing happens. Does anyone know why the mac can see the driver but thinks it's disconnected? Also, under "kind" there's a swirly icon, but I don't know what it means (sorry, Apple newbie).
Thanks!
GCInterestingly here is what I received from Brother. (Note that scanning using the Control Center works fine.):
Dear Brother Customer,
Thank you for taking the time to write to us.
Is your machine able to scan using the Brother ControlCenter software?
If you are able to scan with the ControlCenter, the drivers are
installed and working properly.
Your issue is with Apple's Image Capture software and should be referred
to them for support.
When you open the Apple software, you will need to click DEVICES in the
Menu Bar, then select the disclosure triangle next to TWAIN devices to
reveal the Brother TWAIN device.
Select the Brother TWAIN and click OK.
You should now be able to scan with Apple's Image Capture application.
For any additional assistance with the Apple application, we suggest you
contact Apple for assistance.
We hope this information will be useful to you. If we can be of further
assistance, please let us know.
Best Regards,
MFC Macintosh Support
Brother International, USA
Email: [email protected]
So, who owns the problem: Brother or Apple? If I go to the Apple Store I see Canon and HP scannners for sale but not Brother. Maybe that is part of the problem. Corporate relations between Brother and Apple. -
Rename tracks and copy all to one directory
I have all media sorted in 'typical way' in iTunes. I am tired of this kind of sorting and prefer all the tracks in one directory named as Artist-Album-Track.
I wonder if there is any utility that I can run on iTuned Media Music folder and get ALL tracks renamed the way I want and copy them to a single directory (preferably in one go).
Many thanks in advance.Again as long as the tracks are properly tagged niether Winamp nor MediaMonkey really care about the physical layout of the files, although both can let you browse your library via location as well as other properties. Disc & track numbers would let you play albums in the correct order if needed when using path as the selection criteria.
Its not what I would recommend, but assuming you're still going to use iTunes to add media to the iPad at some point the first thing would be to go to Edit > Preferences > Advanced turn off the options Keep... & Copy...
With MediaMonkey' Auto-Organize Files... feature using this pattern ..\..\<Artist>-<Album>-<Title> would pop all the tracks up from their respective album folders into the main Music folder and name them as requested. I don't have a copy of WinAmp installed at present but I seem to recall it has a feature to reorganize media, though I don't know how flexible it is.
Once the tracks are where you want them delete the broken links from iTunes, then add back again, or do it as and when you want to use iTunes to manage your device.
tt2 -
Windows 7 and Hp all-in-one printer v40
I have an Hp all-in-one printer v40. I cannot access solution center or toolbox for estimated ink levels with my new Windows 7. I have tried your on-linbe suggestions and cannot get any to work. I don't seem to have the options available to click on that are suggested.
Thanks for any help.Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Compatibility of HPTouchsmart15 and Kodak all in one printer
Cannot print using HP touchsmart 15 with my Kodak all in one printer. Downloaded soft ware, etc.says Driver is unavailable, however also shows documents inqueue ready to print.
Follow this process if it helps:
Download the latest AiO software from Kodak.
Deinstall all software.
Re-install the AiO software at this location:
Macintosh HD/Library/Printers/
To view the path:
Select 'Go' on desktop and select 'Computer'
Select 'Macintosh HD'
Select 'Library'
Select 'Printers'
This is the path to install your AiO Printer software.
Install software to this path.
Then type in the script posted online at Kodak where "lindaterry" will obviously be replaced by your own hard disk name
When asked for the password type in the main (admin) password
It will remain static. i.e., will not show what you type in.
Press return and type in the remainder script.
Then go to Settings
Select Printers & Scanners
Add , select your printer and it should show up in the left hand pane.
If not, contact Kodak for remote support.
Maybe you are looking for
-
How to delete all history in the history box
story
-
Is it possible to add a gradient to text in adobe edge animate?
i'm wondering if it's possible to add a gradient to text in adobe edge. I come from the flash world and new to edge. I'm trying to eliminate importing a series of text blocks as art. Can anyone add some insight please? thanks in advance!
-
Picking of Adobe forms from application server
Hi Gurus We have SAP ECC 6.0. So far in our system we have text files and CSV excel files which comes from external system and lies in application sever and these are being picked up automatically by system and gets processed in SAP. 1)The requiremen
-
After upgrading to iOS 4.3.2 I have noticed that when I double click the home button the multitasking tray pops up when you scroll to the left the ipod shortcut is no longer there, it has been replaced by a safari shortcut. Is this right??
-
Hi Experts, I installed NW 7.0 sr3 ABAP system, and then installed BI_CONT release 703 as add-on. But our BI consultant not able to find all the objects when he is trying to activate process chain from the bi content. Can anyone please tell me which