BW 3.5 - How can I select TADIR objects in a specific date range?

Hi everybody,
I have the necessity to obtain a list of BW objects in a specific date range. I have observed that using TADIR table it is impossible because a timestamp is not present. I have also the necessity to group the BW objects using the object type of the TADIR table (e.g. PROG for Program).
Any idea?
Many thanks in advance for your kind support.
Regards,
Giovanni

Hi Giovanni
I would suggest you try put table TADIR in SE11 and generating a "Where-Used List (CtrlShiftF5)" Also you should try double click on data element SOBJ_NAME in the database view of TADIR and generate a Where-Used List on that field, then you can see the relationships of the table/field.
I hope this works for you
Good Luck
Ben
Please Assign Points if Useful

Similar Messages

How can I select an object located under another object?

IS there a shortcut like in QuarkXPress to select an object located under or behind another object?

Press the CMD-key while clicking or use the layers panel.

How can I make CONTAINS query work for a date range

In either 9i or 10g (eventual). I have a CONTEXT index that contains multiple columns from multiple tables and using a USER_DATASTORE. E.g., I have names that come from 3 different table locations and dates that come from 4. I can index them fine but how can I perform a single consolidated CONTAINS query against the single CONTEXT index to do the following:
smith WITHIN lname AND john WITHIN fname AND dob BETWEEN '19870315' and '19970315'
I know that I can use a mixed query but this is inefficient (esp since I have birth dates in multiple tables). Is there any algorithm for a range operator (>, <, between?) within the CONTAINS operator?
CTXCAT index is not an option, as I have many text columns I am searching.
Thanks!

When you run the cdstore.sql, in addition to creating the ctx_cd package, it also creates the friedman package that contains the algorithm that the ctx_cd package uses. You could use the functions from that friedman package in your procedure for your user_datastore and in the creation of your query string, as demonstrated below.
SCOTT@orcl_11g> CREATE OR REPLACE PROCEDURE my_proc
2    (p_rowid IN           ROWID,
3      p_clob     IN OUT NOCOPY CLOB)
4 AS
5 BEGIN
6    FOR r IN
7       (SELECT emp.ename, emp.job, emp.hiredate, dept.dname
8        FROM      emp, dept
9        WHERE emp.deptno = dept.deptno
10        AND      emp.ROWID = p_rowid)
11    LOOP
12       DBMS_LOB.WRITEAPPEND (p_clob, 7, '<ename>');
13       DBMS_LOB.WRITEAPPEND (p_clob, LENGTH (r.ename), r.ename);
14       DBMS_LOB.WRITEAPPEND (p_clob, 8, '</ename>');
15       DBMS_LOB.WRITEAPPEND (p_clob, 5, '<job>');
16       DBMS_LOB.WRITEAPPEND (p_clob, LENGTH (r.job), r.job);
17       DBMS_LOB.WRITEAPPEND (p_clob, 6, '</job>');
18       DBMS_LOB.WRITEAPPEND (p_clob, 7, '<dname>');
19       DBMS_LOB.WRITEAPPEND (p_clob, LENGTH (r.dname), r.dname);
20       DBMS_LOB.WRITEAPPEND (p_clob, 8, '</dname>');
21       DBMS_LOB.WRITEAPPEND (p_clob, 10, '<hiredate>');
22       -- apply friedman algorithm to date column ------------------
23       friedman.init
24         (TO_NUMBER (TO_CHAR (TO_DATE (19000101, 'YYYYMMDD'), 'J')),
25          TO_NUMBER (TO_CHAR (TO_DATE (21001231, 'YYYYMMDD'), 'J')));
26       DBMS_LOB.WRITEAPPEND
27         (p_clob,
28          LENGTH (friedman.encodedate (r.hiredate)),
29          friedman.encodedate (r.hiredate));
30       --------------------------------------------------------------
31       DBMS_LOB.WRITEAPPEND (p_clob, 11, '</hiredate>');
32    END LOOP;
33 END my_proc;
34 /
Procedure created.
SCOTT@orcl_11g> SHOW ERRORS
No errors.
SCOTT@orcl_11g> BEGIN
2    CTX_DDL.CREATE_PREFERENCE ('my_datastore', 'USER_DATASTORE');
3    CTX_DDL.SET_ATTRIBUTE      ('my_datastore', 'PROCEDURE', 'my_proc');
4 END;
5 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> CREATE INDEX my_index ON emp (ename)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS
4    ('DATASTORE     my_datastore
5       SECTION GROUP CTXSYS.AUTO_SECTION_GROUP')
6 /
Index created.
SCOTT@orcl_11g> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'DEPT')
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'EMP')
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> VARIABLE cstring VARCHAR2(4000)
SCOTT@orcl_11g> BEGIN
2    :cstring := 'smith WITHIN ename';
3    :cstring := :cstring || ' AND ' || 'clerk WITHIN job';
4    :cstring := :cstring || ' AND ' || 'research WITHIN dname';
5    -- apply friedman algorithm to search criteria ---------------------------
6    friedman.init
7       (TO_NUMBER (TO_CHAR (TO_DATE (19000101, 'YYYYMMDD'), 'J')),
8        TO_NUMBER (TO_CHAR (TO_DATE (21001231, 'YYYYMMDD'), 'J')));
9    :cstring := :cstring || ' AND ((' ||
10              friedman.integercontainscriteria
11                (TO_NUMBER (TO_CHAR (TO_DATE ('19800315', 'YYYYMMDD'), 'J')),
12                 TO_NUMBER (TO_CHAR (TO_DATE ('19810315', 'YYYYMMDD'), 'J')),
13                 'B')
14              || ') WITHIN hiredate)';
15    ---------------------------------------------------------------------------
16 END;
17 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11g> SET AUTOTRACE ON EXPLAIN
SCOTT@orcl_11g> SELECT *
2 FROM   emp
3 WHERE CONTAINS (ename, :cstring) > 0
4 /
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        800                    20
Execution Plan
Plan hash value: 1887222286
| Id | Operation                   | Name     | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |          |     1 |    37 |     4   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| EMP      |     1 |    37 |     4   (0)| 00:00:01 |
|* 2 |   DOMAIN INDEX              | MY_INDEX |       |       |     4   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("CTXSYS"."CONTAINS"("ENAME",:CSTRING)>0)
SCOTT@orcl_11g>

How can I know what objects are under specific tablesapce?

Dear all,
I want to find out how many tables are under "SYSAPPL" tablespace. How can I know that?
Please advice,
Amy

Assuming you have appropriate privileges,
SELECT COUNT(*)
FROM dba_tables
WHERE tablespace_name = 'SYSAPPL'If you don't have access to DBA_TABLES, you may be able to use USER_TABLES or ALL_TABLES, but that may miss objects that are in that tablespace that you don't have access to.
Justin

How can I access a control's description and data range information from within LabVIEW 6.1 or 7.0?

I didn't see an obvious way of accomplishing this. Is this possible?

Right click on the Control and navigate to Create>Property Node. Now on the newly created node, right click on it where it says Visible and navigate to Properties>Description. This will output a string of the controls description. Now grow the node by right clicking and selecting Add Element. On on the property, right click and navigate to Properties>Data Range>All Elements. This will generate a cluster with all the range info.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

How to get the weekends days for a specific date range

I want to select list of only weekend dates from a given date range. Is it possible in SQL?
For example if the range is '08/01/2011' and '08/30/2011'
I want a list
08/06/2011
08/07/2011
08/13/2011
08/14/2011
08/20/2011
08/21/2011
08/27/2011
08/28/2011Thank You, Naveen email:[email protected]

First and easy to do is having a Calendar table, which over there you can have those information.
http://arbibaghdanian.blogspot.com/2011/05/calendar-table.html
Declare @beginDate Date, @EndDate Date
Select @beginDate = '08/01/2011', @EndDate = '08/31/2011'
Declare @Calendar Table
(CalendarDate Date Primary key, IsWeekend Bit, YearNo SmallInt, QuarterNo TinyInt, MonthNo TinyInt, DayOfYearNo SmallInt, DayNo TinyInt, WeekNo TinyInt, WeekDayNo TinyInt)
While @beginDate <= @endDate
Begin
Insert Into @Calendar
Select
@beginDate As CalendarDate
,(Case When DATEPART(Weekday, @beginDate) In (7, 1) Then 1 Else 0 End) As IsWeekend
,DATEPART(Year, @beginDate) As YearNo
,DATEPART(QUARTER, @beginDate) As QuarterNo
,DATEPART(MONTH, @beginDate) As MonthNo
,DATEPART(DayOfYear, @beginDate) As DayOfYearNo
,DATEPART(Day, @beginDate) As DayNo
,DATEPART(Week, @beginDate) As WeekNo
,DATEPART(WEEKDAY, @beginDate) As WeekDayNo
Set @beginDate = DateAdd(Day, 1, @beginDate)
End
Select * From @Calendar Where IsWeekend = 1
Best Wishes, Arbi --- MCC 2011; Please vote if you find this posting was helpful or Mark it as answered.

In se63 how can i select the object selection

hi,
while sap tanslation from en to de in se63 asking object name?
how to select object name and how to translate program documentation

hi Narendra,
1. Goto menu, TRANSLATION, choose the objects coming under categories, ABAP object or Non-ABAP objects
after choosing the right object, double click on the item.
For reports, use the following method.
1->Translation->ABAP object->long texts (Documentations)
2->choose F1 Help or OTHER Documentation->TEXTS.
Hope this helps,
Sajan Joseph.
Message was edited by:
Sajan Joseph

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

How can I select more than one song from the search results?

I want to create playlists based on certain words in the song title. For example, I may want to create a playlist of all my songs with LOVE in the title.
Doing the search is easy, but I can't select more than one song at a time. Is there any way in iTunes 12 for Windows to do this? I found an answer in iTunes for Mac, and it basically says to "un-check "Search Entire Library." " but I don't see that option in iTunes for Windows.
Here is the link to that question: how can i select more than one song from drop down search bar
I hope some Windows user can help me out.

Found the "Search Entire Library" option - click on the small (VERY small for my eyesight) down arrow next to the magnifying glass. Also need to select "Filter by: Songs", and then the songs in the main window show the results.
I'm going to leave this up on the board because 1) in case someone else has this question, and 2) I don't know how to delete it anyway.

How can I select multiple photos of files without selecting each individual one

How can I select multiple files or photos without having to select each individual one? Like you can do on Windows

Op: without tapping on each one individually
tap all the photos you want to delete.
Note what the OP is asking.

How can I select multiple photos without tapping on each one individually

How can I select multiple photos without tapping on each one individually?

Op: without tapping on each one individually
tap all the photos you want to delete.
Note what the OP is asking.

How can I select from drop-down list and jumping to selected subform?

I using LC Designer ES2 vers 9. Developing XDP. How can I Select from a drop-down list the appropriate selected subform (jumping to the selected subform on the page)?
drop-down list...A (jump to subform1)
                         B (jump to subform2)
                         C (jump to subform3)
subform1
subform2
subform3
....end of form

Hi,
you cannot set focus on a subform but on a field, as only interactive objects can be focussed.
From a dropdowns exit event the script will look this way:
switch (this.rawValue) {
          case "A" : xfa.host.setFocus("form1.page2.field1"); break;
          case "B" : xfa.host.setFocus("form1.page2.field1"); break;

How can I select a date to view in Calendar while I am in month view?

I am looking at month view in Calendar on my iPad. I touch a date. Intuitively, I expect that date to open up in Day or Week view, but it doesn't! On my iphone, it works just fine. Am I missing something?
How can I select a date to view while in Month view and have it go to Day or Week view?
Thanks for any help.

I would try this:
In Lr import one photo into a different folder that you can see in the list.
Then in your OS (mac Finder / Win Explorer) move the photo to the folder that you cannot see.
In Lr the photo will now appear with a question mark on its frame. Click directly on the question mark and select <Locate photo>. Navigate to the folder, open it, and click on the photo.
Maybe this will help Lr to recognize the folder.
If this doesn't help try renaming the folder in your OS.

How can I select only the music I want on my iPhone without putting all of it on?

How can I select only the music I want on my iPhone without putting alll of it on my phone?

http://support.apple.com/kb/PH12313

How can I select and enlarge the entire doc,ge on a page, reducing the surrounding boarder. I can move the difference text boxes about independently of each other but the outer most boarders of the main template block appear to be fixed.

How can I select adn enlarge the entire document/image on a page, reducing the the surrounding boarder? I can move the different text and image boxes around independently of each other but the outer most boarders of the main template block appear to be fixed. I thought I would be able to enlarge or reduce my document from 'page layout' but this does not seem possible.

Inspector > Document > Document Margins
The word is border. Boarders are the Harry Potters of this world.
Peter

BW 3.5 - How can I select TADIR objects in a specific date range?

Similar Messages

Maybe you are looking for