BW Data Load Monitoring
Hi,
Could anybody say me how to monitoring a load from R3(4.6C) to BW(3.5)?
I need to know the size in MB transfered in a load. In transaction RSMON i can see the records transfered but i don´t know how to calculate the mb. I need to know the size of the records to calculate this. Or there is a transaction where can i find the information?
Thanks.
Hi,
The perfect way to calculate the size of your daily data load in MB is to.
Goto Transaction DB02
Press the Space Statistics which you can find at the end of the screen..
A small pop window will open - in that select table statistics
Now a new screen will open, give the name of your table(PSA, DSO, Cube ) and make sure you give the technical name that starts with /BIC/ and you can see
the size and other details for a day, week and month.
Regards,
Kadriks
Similar Messages
-
Common issues in data load monitoring...
Hi all,
Can u please tell me what are the common issues that occur during data load monitoring and how to rectify them??This is a bit dependent on your system and landscape. but to mention some of issues:
- Deadlock in cube because the inxedes were not dropped before loading data into cube
- Unallowed signs in master data prevent system from creating SID
- Duplicate values in master data load (can be avoided by setting a flag in DTP)
- Loading delta package without having intitialized before
- Source package delivers key figure without units (this happens when laoding into a cube or an DSO with SID generation)
- Missing replication of data source after transporting data source in source system
Regards
Aban -
Assistance Needed on Data Load Monitoring
presently i'm working in a support proj which is data load monitoring ( mainly process chains) , As a result of which i will the responsible person to fix some of the loads when it fails eg : Duplicate records, errorneous records, attrbutute chain run etc .
As a fresher in BW i need to learn some of the things like Types of updates, process types & process chains proficiently thick & fast , i request you to please send in some PDF's or ppt regarding the same , if any books are there then please suggest one.
i Need mainly regarding
Dataflow & update Types Briefly .
process Types , chains
Delta mechanism .
Hope you will bail me out of this situation.
Thanks in Advance ,
HPHere are all the links:
sap document on process chains:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
help.sap.com link for creation of process chains:
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
helpful threads on issues related to process chains:
Process Chains creation and monitoring
Process Chain
Re: OPEN HUB with Process Chain
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
Re: OPEN HUB with Process Chain
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3806122
Re: attribute change run
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3790051
Re: Process Chain Scheduling
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=4426820
Re: Process Chain
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3692343
Re: Process Chain
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3841608
Re: Can a process can have more than one variant?
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3855067
Re: about the open hub...!
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3700389
Re: Process chain statistics
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=4162319
Re: Process Types in BI 7.0
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3759916
Re: How to deactivate the local chain in Main chain
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3591699
Re: changing a process type during running of process chain
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3750639
Re: Node for Process chain--Urgent
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3692720
Re: Process Chains Events
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=3707415
Re: process chain event trigger problem
https://forums.sdn.sap.com/click.jspa?searchID=6646868&messageID=4374184
Thanks.,...
Shambhu -
Dear Experts,
I would like to know on what circumstances we should use following Data load monitoring tools:
1. RSMO
2. SSA/BWT
3. ST13
4. RZ20
It would be more helpfull if you can describe pros and cons of each tool.
Regards
Vivek TripathiHi Vivek,
RSMO is used to monitor the dataloads coming into the BI system. Here you can find the details for each and Every load happened.
SSA/BWT is a Program which provide you the details about Process Chain Analysis, Detailed Request Analysis ,Aggregate Toolset etc.
Refer this Wiki for more details.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/bw%252btools
ST13- This provides a set of tools which talk mostly about Performance of the BI system.
Refer this Blog
Overview important BI performance transactions
Regarding RZ20 - It is called as CCMS Monitor Sets
Here in CCMS you have different monitoring tools for different components.
If BI is concerned you can monitor the details about BI Accelerator Monitor,BI Key Performance Indicators ,BI Monitor etc.
Regards
Karthik -
Regading Process chains data load monitoring
Hi All,
In my current project, I need to monitor process chains. I am kind of new to this environment as I had not done this before. My tasks are as follows.
1. Process chains are scheduled for a periodic job for every on hour starting at 6 a.m and ending at 12 a.m. After that I need to stop the chain and reschedule it for next day at 6 a.m. How do I do that?
2. Also if a delta process chain fails in one of the processes, I need to stop the chain before the next delta run starts filling the cube. How do I do that?
Also how to see why the process failed?
Please do respond.
Thanks in advance.You can stop your process chain in SM37 tcode. Just select the schedules processes, and here you can see your process chain, just select it, and cancel it for next release.
You can restart it, just by clicking on Execute button. Before executing PC, just cross check by right clicking process chain, and go to change selection option of maiantain variant of start variant. And see if process chain schedule option is starting at 6A.M. or not, and also check it is selected as period job of ` hour or not.
You can see log of process chain by right clicking it, and checking the message. It depends on what option for next process is you selected, like if your next variant connected to failed variant is selected as only if success, then you don;t need to stop ot. It will automatically not go to next process. or right click and you can select stop.
By right clicking on failed process you can see the logs in details. -
Data Load to BI (7.0 SP 9) from R3(ECC 6.0 SP-Basis 9)
Dear All,
We have new instance of Devlopment BW System with version 7.0 and R/3 upgraded to ECC6.0. We connected the source system. When we extract the data through DTP the data load is sucessful with 0 Records.
This is case with all the extractors.
The data base is on Oracle 10.2
Observations for this:
0) Source system connection check OK.
1) When I test in RSA3 for the same extract I could fetch some data there.
2) I could transfer the global setting
3) I could not see any of the iDoc generated in BW and received in R/3
4) No back ground job is generated in R/3 in SM37
5) I could extract the data from other Source System(SEM) instance based on 3.5 technology.
As a progress on this issue I could load the load sucessfully by 3.X methodolgy (Using update rules) but not by BI7.0 Methodology(Using Transformation).
As a standards by the client we have to use 7.0 Methodology so still need to find a solution for the same.
No clue on how to solve and what is going on wrong. Help me in solve this issue.
Thanks in Advance,
PV
Message was edited by:
USERPVI am not sure if you have followed all the necessary steps to do a data load to the infocube. I also wish I had more information about your system and the error message you are getting. A data load can fail due to a variety of reasons -- depending on the BW version, system settings and the procedure you followed. Please use the data load monitor transaction rsmo, identify the error message and take the necessary action.
if it may be useful reward point are appreciated -
What are the possible errors that can happen in data loads(rsmo monitor)?
hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
poojaHi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK -
Data Load Statistics - Monitoring
Hello All
I have a quick questions on how to check the no of records LOADED into INFPKG (PSA) --> DTP (DSO) --> DTP (CUBE).
1) Meaning, I can individually but is there any automated program / transaction / table that can tell me no of records LOADED into PSA --> DSO --> CUBE for any paricular process chain?
2) If I mistakenly deleted a request from Cube/DSO/PSA, how would I retrieve it ?
Thanks in advanceHi,
1) Meaning, I can individually but is there any automated program / transaction / table that can tell me no of records LOADED into PSA --> DSO --> CUBE for any paricular process chain?
--> Table: RSMONICTAB -- Monitor, Data Targets(Infocube/ODS) Table, request related info
2) If I mistakenly deleted a request from Cube/DSO/PSA, how would I retrieve it ?
--> If data loading : PSA > DSO> Cube then..
If data lost in cube, can be loaded from DSO,
If data lost in DSO, and available at PSA can be loaded/reconstruct from PSA
If data not available in PSA cant possible. Need to reload from source.
Hope it Helps
Srini -
Data load problem - BW and Source System on the same AS
Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
<u><b>BW Monitor Status:</b></u>
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
<b><u>BW Monitor Details:</u></b>
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
<b><u>Transactional RFC (sm58):</u></b>
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
<b><u>System Log (sm21):</u></b>
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
<b><u>RFC Destinations (sm59):</u></b>
Both RFC destinations look fine, with connection and authorization tests successful.
<b><u>RFC Users (su01):</u></b>
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
GuilhermeGuilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat -
BI 7.0 data load issue: InfoPackage can only load data to PSA?
BI 7.0 backend extraction gurus,
We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.
After the transformation creation between the InfoSource and the ODS is done on this BI system, a new folder called "Data Transfer Process" is also created under this ODS in the InfoProvider view. In the Data Transfer Process, in the Extraction tab, picks 'Full' in the field Extraction Mode, in the Execute tab, there is a button 'Execute', click this button (note: so far we have not created InfoPackage yet) which sounds like to conduct the data load, but find there is no data available even if all the status show green (we do have a couple of records in the R3 table).
Then we tried to create an InfoPackage, in the Processing tab, find 'Only PSA' radio button is checked and all others like 'PSA and then into Data Targets (Package by Package)" are dimmed! In the Data Target tab, find the ODS as a target can't be selected! Also there are some new columns in this tab, 'Maintain Old Update Rule' is marked with red color 'X', under another column 'DTP(S) are active and load to this target', there is an inactive picture icon, that's weird since we have already activated the Data Transfer Process! Anyway, we started the data load in the InfoPackage, and the monitor shows the records are brought in, but since in the Process tab in the InfoPackage, 'Only PSA' radio button is checked with all others dimmed that there is no any data going to this ODS! Why in BI 7.0, 'Only PSA' radio button can be checked with others all dimmed?
Many new features with BI 7.0! Any one's idea/experience is greatly appreciate on how to load data in BI 7.0!You dont have to select anything..
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
<b>Pre-requisite-</b>
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP.. -
Hi,
I have a question regarding data loads. We have a process cahin which includes 3 ods and cube.
Basically ODS A gets loaded from R/3 and the from ODS A it then loads into 2 other ODS B, ODS C and CUBE A.
So when I went to monitor screen of this load ODS A-> ODS B,ODS C,CUBE A. The total time shows as 24 minutes.
We have some other steps in process chain where ODS B-> ODS C, ODS C- CUBE 1.
When I go the monitor screen of these data loads the total time the tortal time for data loads show as 40 minutes.
I *am suprised because the total run time for the chain itself is 40 minutes where in the chain it incclude data extraction form R/3 and ODS's Activations...indexex....
*Can anybody throw me some light?
Thank you all
Edited by: amrutha pal on Sep 30, 2008 4:23 PMHi All,
I am not asking like which steps needed to be included in which chain.
My question is when look at the process chain run time it says the total time is equal to 40 minutes and when you go RSMO to check the time taken for data load from ODS----> 3 other data targets it is showing 40 minutes.
The process chain also includes ods activation buliding indexex,extracting data from R/3.
So what are times we see when you click on a step in process chain and displaying messages and what is time you see in RSMO.
Let's take a example:
In Process chain A- there is step LOAD DATA- from ODS A----> ODS B,ODS C,Cube A.
When I right click on the display messages for successful load it shows all the messages like
Job started.....
Job ended.....
The total time here it shows 15 minutes.
when I go to RSMO for same step it shows 30 mintues....
I am confused....
Please help me??? -
CALL_FUNCTION_CONFLICT_TYPE Standard Data loading
Hi,
I am facing a data loading problem using Business content on CPS_DATE infocube (0PS_DAT_MLS datasource).
The R/3 extraction processes without any error, but the problem occurs in the update rules while updating the milestone date. Please find hereunder the log from the ST22.
The real weird thing is that the process works perfectly in development environment and not in integration one (the patch levels are strongly the same: BW 3.5 Patch #16).
I apologise for the long message below... this is a part of the system log.
For information the routine_0004 is a standard one.
Thanks a lot in advanced!
Cheers.
CALL_FUNCTION_CONFLICT_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Symptoms. Type conflict when calling a function module
Causes Error in ABAP application program.
The current ABAP program "GP420EQ35FHFOCVEBCR6RWPVQBR" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program.
A function module was called incorrectly.
Errors analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was neither caught nor passed along using a RAISING clause, in the procedure "ROUTINE_0004"
"(FORM)" .
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated. The reason for the exception is:
The call to the function module "RS_BCT_TIMCONV_PS_CONV" is incorrect:
The function module interface allows you to specify only fields of a particular type under "E_FISCPER".
The field "RESULT" specified here is a different field type.
How to correct the error.
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
"CALL_FUNCTION_CONFLICT_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC
"GP420EQ35FHFOCVEBCR6RWPVQBR" or "GP420EQ35FHFOCVEBCR6RWPVQBR"
"ROUTINE_0004"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)". 2. A suitable printout of the system log To obtain this, call the system log through transaction SM21. Limit the time interval to 10 minutes before and 5 minutes after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs, supply the source code.
To do this, select the Editor function "Further Utilities-> Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"ROUTINE_0004"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Environment system SAP Release.............. "640"
Operating system......... "SunOS" Release.................. "5.9"
Hardware type............ "sun4u"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 2
Short dump setting....... "full"
Database type............ "ORACLE"
Database name............ "BWI"
Database owner........... "SAPTB1"
Character set............ "fr"
SAP kernel............... "640"
Created on............... "Jan 15 2006 21:42:36" Created in............... "SunOS 5.8 Generic_108528-16 sun4u"
Database version......... "OCI_920 "
Patch level.............. "109"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version..... "640"
Operating system......... "SunOS 5.8, SunOS 5.9, SunOS 5.10"
SAP Release.............. "640"
The termination occurred in the ABAP program "GP420EQ35FHFOCVEBCR6RWPVQBR" in
"ROUTINE_0004".
The main program was "RSMO1_RSM2 ".
The termination occurred in line 702 of the source code of the (Include)
program "GP420EQ35FHFOCVEBCR6RWPVQBR"
of the source code of program "GP420EQ35FHFOCVEBCR6RWPVQBR" (when calling the editor 7020).
Processing was terminated because the exception "CX_SY_DYN_CALL_ILLEGAL_TYPE" occurred in the procedure "ROUTINE_0004" "(FORM)" but was not handled locally, not declared in the RAISING clause of the procedure.
The procedure is in the program "GP420EQ35FHFOCVEBCR6RWPVQBR ". Its source code starts in line 685 of the (Include) program "GP420EQ35FHFOCVEBCR6RWPVQBR ".
672 'ROUTINE_0003' g_s_is-recno
673 rs_c_false rs_c_false g_s_is-recno
674 changing c_abort.
675 catch cx_foev_error_in_function.
676 perform error_message using 'RSAU' 'E' '510'
677 'ROUTINE_0003' g_s_is-recno
678 rs_c_false rs_c_false g_s_is-recno
679 changing c_abort.
680 endtry.
681 endform.
682 ************************************************************************
683 * routine no.: 0004
684 ************************************************************************
685 form routine_0004
686 changing
687 result type g_s_hashed_cube-FISCPER3
688 returncode like sy-subrc
689 c_t_idocstate type rsarr_t_idocstate
690 c_subrc like sy-subrc
691 c_abort like sy-subrc. "#EC *
692 data:
693 l_t_rsmondata like rsmonview occurs 0 with header line. "#EC *
694
695 try.
696 * init
variables
697 move-corresponding g_s_is to comm_structure.
698
699 * fill the internal table "MONITOR", to make monitor entries
700
701 * result value of the routine
>>>> CALL FUNCTION 'RS_BCT_TIMCONV_PS_CONV'
703 EXPORTING
704 I_TIMNM_FROM = '0CALDAY'
705 I_TIMNM_TO = '0FISCPER'
706 I_TIMVL = COMM_STRUCTURE-CALDAY
707 I_FISCVARNT = gd_fiscvarnt
708 IMPORTING
709 E_FISCPER = RESULT.
710 * if the returncode is not equal zero, the result will not be updated
711 RETURNCODE = 0.
712 * if abort is not equal zero, the update process will be canceled
713 ABORT = 0.
714
715 catch cx_sy_conversion_error
716 cx_sy_arithmetic_error.
717 perform error_message using 'RSAU' 'E' '507'
718 'ROUTINE_0004' g_s_is-recno
719 rs_c_false rs_c_false g_s_is-recno
720 changing c_abort.
721 catch cx_foev_error_in_function.
System zones content
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 65
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY 0400
SY-UCOMM OK
SY-TITLE Moniteur - Atelier d'administration
SY-MSGTY E
SY-MSGID RSAU
SY-MSGNO 583
SY-MSGV1 BATVC 0000000000
SY-MSGV2 0PROJECT
SY-MSGV3
SY-MSGV4
Selected variables
Nº 23 Tpe FORM
Name ROUTINE_0004
GD_FISCVARNT
22
00 RS_C_INFO I
4
9
COMM_STRUCTURE-CALDAY
20060303
33333333
20060303
SYST-REPID GP420EQ35FHFOCVEBCR6RWPVQBR 4533345334444454445355555452222222222222 704205135686F365232627061220000000000000
RESULT
000
333
00You have an update routine in which youar callin FM 'RS_BCT_TIMCONV_PS_CONV'. Parameter e_fiscper must be the same that type of the variable you use (you can see the data tyoe in FM definition, transaction se37). You should do somethin like the following.
DATA: var type <the same that e_fiscper in FM definition>
CALL FUNCTION 'RS_BCT_TIMCONV_PS_CONV'
EXPORTING
I_TIMNM_FROM = '0CALDAY'
I_TIMNM_TO = '0FISCPER'
I_TIMVL = COMM_STRUCTURE-CALDAY
I_FISCVARNT = gd_fiscvarnt
IMPORTING
E_FISCPER = var.
result = var.
--- ASSIGN POINTS IS USEFUL. -
Data load to DSO takes long time to finish
Dear All,
We have a data load from data source to std DSO.The data load takes 5 hours to complete 6000 records in single data package which is long time.
Process monitor shows yellow status at one of the step for long time "No message :Transformation End" and after 5 hours approx it completes successfully.
Please find the snapshot of process monitor(Attached File Process monitor.png).
There is an end routine and the transformation is having direct mapping except for a target object exchage rate which is master data look up of DSO (Attached FIle : Transformation rule.png)
The look up DSO /BI0/AFIGL_DS00 in the below code is having DOCNUM as a primary key but not the POSKY. Since one of the field is not a primary key,secondary index is created for the look up DSO.But,still it takes huge time to finish the last step as mentioned in the snapshot.
Setting for parallel process is 1
DTP--> Update tab-->Error handling-->No update,no reporting.But there is a error DTP present which I believe that there is no use when "No update,No reporting" option is chosen.
Can you please suggest the reason for the such long time.Also,Please suggest how to find the exact place where it consumes lot of time.
End routine Logic:
IF NOT RESULT_PACKAGE IS INITIAL.
REFRESH IT_FIG.
SELECT DOCNUM POSKY DEBCRE LOCC
FROM /BI0/AFIGL_DS00 INTO TABLE IT_FIG
FOR ALL ENTRIES IN RESULT_PACKAGE
WHERE DOCNUM = RESULT_PACKAGE-BILNO AND
POSKY = '02'.
LOOP AT RESULT_PACKAGE ASSIGNING <RESULT_FIELDS>.
READ TABLE IT_FIG INTO WA_FIG WITH KEY
DOCNUM = <RESULT_FIELDS>-BILNO.
IF SY-SUBRC EQ 0.
<RESULT_FIELDS>-DEB = WA_FIG-DEBCRE.
<RESULT_FIELDS>-LOC_CURRC2 = WA_FIG-LOCC.
ENDIF.
ENDLOOP.
ENDIF.
Thanks in advance
Regards
PradeepHi,
below code check it and try to load the data.
IF RESULT_PACKAGE IS NOT INITIAL.
SELECT DOCNUM
POSKY
DEBCRE
LOCC
FROM /BI0/AFIGL_DS00 INTO TABLE IT_FIG
FOR ALL ENTRIES IN RESULT_PACKAGE
WHERE DOCNUM = RESULT_PACKAGE-BILNO AND
POSKY = '02'.
LOOP AT RESULT_PACKAGE ASSIGNING <RESULT_FIELDS>.
READ TABLE IT_FIG INTO WA_FIG WITH KEY
DOCNUM = <RESULT_FIELDS>-BILNO.
IF SY-SUBRC EQ 0.
<RESULT_FIELDS>-DEB = WA_DOCNUM.
<RESULT_FIELDS>-DEB = WA_POSKY.
<RESULT_FIELDS>-DEB = WA_FIG-DEBCRE.
<RESULT_FIELDS>-LOC_CURRC2 = WA_FIG-LOCC.
ENDIF.
ENDLOOP.
ENDIF.
if your are getting any error please let us know
1.decrease the data packet size in DTP like 10,000 or 20,000.
2.increase the parallel process at DTP level.
Thanks,
Phani. -
Error 8 when starting the extracting the program-data load error:status 51
Dear all,
<b>I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). </b>The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
<b>bi data upload error:status 51 - error: Error 8 when starting the extracting the program </b>
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
IDoc sent to SAP system or external program"
r<b>/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
Error 8 when starting the extraction program</b>
Info IDoc 1 : Application document posted (green)
r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
IDoc sent to SAP system or external program"
bw side: "IDoc: 0000000000007089 Status: Application document posted,
IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
check connection is ok, tried to restore the setting for bw-r3 connection though same problem
Have checked partner profile.
<b>what's wrong with the process? </b>
Best regards,
dushyant.Hi,
Refer note 140147.
Regards,
Meiy -
Error is data loading from 3rd party source system with DBCONNECT
Hi,
We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
The connection is working OK and we can see the tables in the source system. But we cannot load the data.
The error in the monitor is as follows:
'Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.'
But, unfortunately, the error message has no further information.
If we look at the job log in sm37, the job finished with the following log -
27.10.2009 12:14:19 Job started 00 516 S
27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA) 00 550 S
27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG RSM1 797 S
27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container OL 356 S
27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G RSM1 796 S
27.10.2009 12:14:24 Job finished 00 517 S
In a BW 3.10 system, there is no message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
Thanks in advance,
RajibThere will be three things to get the errors like this
1.RFC CONNECTION FAILED
2.CHECK THE SOURCE SYSTEM
3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
4.CHECK I DOC PROCESSING
5.FINALLY MEMORY ISSUES.
6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
7.LAST IS MEMORY ISSUE.
and also Check the RFC connection in SM59 If it is ok then
check the SAP note : 692195 for authorization
Santosh
Maybe you are looking for
-
Should Airport Utility now be defunct for my time capsule because I have upgraded OS to Mountain Lion? I have tried every fix I can think of but AU will not set up. I'm also getting repeated time machine back up failures and now I have a new "sparseb
-
Dreamweaver CS4 Errors, Spry widget not working. Please Help!
I am redesigning a website and downloaded an html file from the present contact page. I opened it in Dreamweaver and I started to have this errors. The html file I opened has some JavaScripts in it and I believe, the the scripts got a conflict with D
-
Playing to clips aat the same time
i was just wondering if it is possible to play more then one clip at the same time. like side by side or one on top of another. if so, how and if not does anyone know what i should get to be able to do this?
-
I am trying to debug my code in VisualCafe and I get the following error: java.sql.SQLException: java.sql.SQLException: License Problem: The following applies to holders of standard BEA/WebXpress licenses: weblogic.d.h: Error parsing XML license file
-
I don't see photos in iCloud, even with photo stream on on devices.