Error is data loading from 3rd party source system with DBCONNECT

Hi,
We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
The connection is working OK and we can see the tables in the source system. But we cannot load the data.
The error in the monitor is as follows:
'Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.'
But, unfortunately, the error message has no further information.
If we look at the job log in sm37, the job finished with the following log -
27.10.2009 12:14:19 Job started                                                                                00           516          S
27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S
27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S
27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S
27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S
27.10.2009 12:14:24 Job finished                                                                                00           517          S
In a BW 3.10 system, there is no message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
Thanks in advance,
Rajib

There will be three things to get the errors like this
1.RFC CONNECTION FAILED
2.CHECK THE SOURCE SYSTEM
3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
4.CHECK I DOC PROCESSING
5.FINALLY MEMORY ISSUES.
6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
7.LAST IS MEMORY ISSUE.
and also Check the RFC connection in SM59 If it is ok then
check the SAP note : 692195 for authorization
Santosh

Similar Messages

Can PU12 fetch results from 3rd-party payroll systems?

Gurus:
We have configured PU12 to export master data or master/payroll data to 3rd-part systems.
Could you tell us how to fetch the results from external 3rd-party systems back to our ECC system?
Thanks!

Hi Ashley,
You can import the wage types from 3rd party systems into SAP. Then you can run the payroll in SAP system.
Check the following description taken from help.sap.com.
You use the Import wage types function to transfer wage types from a third-party system to the
payroll results of the SAP System.
For more information, see the Implementation Guide (IMG) for Cross Application
Components under Predefined ALE Business Processes   Human Resources
HR External Systems   Connection With an External Payroll System   Import
Payroll Results or in the SAP Library under CA Cross Application Components
Business Framework Architecture (CA-BFA)   Library of ALE Business Processes
Human Resources   Human Resources - External Applications   Process Flow:
Import Payroll Results from a Third-Party System [Ext.].
Starting the Import
Prerequisites
You have successfully run payroll in a third-party system.
Procedure
1. In the menu, choose Import wage types   Create IDocs.
You access the IDoc Inbound Processing Via File screen.
2. In the Complete file name field, enter the name of the input file.
3. Choose Execute.
The system message contains the number of created IDocs.
4. In the menu, choose File   Import wage types   Create IDocs.
You access the Inbound Processing of IDocs Ready for Transfer screen.
5. Enter MANAGEREXTPAYROLL_INSERTOUT as the Message type and, if required, enter the
Creation date and the Creation time.
6. Choose Execute.
Result
The wage types created in the third-party system are available for further processing in the
interface tables of the SAP System.
You can then start payroll in the SAP System and perform the subsequent payroll activities:
Create a remuneration statement
Run posting to Accounting
Regards,
Dilek

Error in data load from application server

Well, this problem again!
In datasource for dataload by flatfile, tab Extraction i selected Load Text-Type File From Application Server.
In tab Proposal:
Converter: Separated with Separator (for Example, CSV).
No. of Data Records: 9198
Data load sucefull.
I add 1 record:
Converter: Separated with Separator (for Example, CSV).
No. of Data Records: 9199
So appear a message error "Cannot convert character sets for one or more characters".
I look in line 9199 in file and not have any special character. I use AL11 and debug to see this line.
When i load file from local workstation, this error not occur.
What's happen?

Hi Rodrigo,
What type of logical file path have yopu created in the application server for loading this file.
Is it a UNIX file path or an ASCII file path.
Did you check how the file looks in the application server AL11?
Prathish

Recipe data migration from 3rd party system to SAP Recipe Management

Dear All,
Can anybody give the steps to be followed to upload Recipe data from a 3rd party system into the
SAP Recipe Management (RM). I am looking for the logical process to populate the RM tables.
Thanksa lot in advance,
Regards,
Achyuta

As I known , there is a interface tool named as IDOC.For more information , please ask your abap team.

CUNIT error in data loading from flat file after r/3 extraction

Hi all
After R/3 business content extraction, if i load data from flat file to info cube, I am getting Conversion exit CUNIT error, what might be the reason, the data in the flat file 0unit column is accurate, and mapping rules are also correct, but still i am getting error with CUNIT.?

check your unit if you are loading amount or quantities what mapping you have and what you are loading from flat files.
BK

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Data interfacing from 3rd party system to SAP

Dear all,
We are going to upload employee masters, including actions, org assignment, personal information and other infotypes from a third-party system to SAP HCM. May I know what should be the best approach, e.g. BDC, BAPIs, for these kinds of data interfacing? I am thinking to use....
BDC for hiring/transfer/termination actions (besides BDC, any other approaches?)
RH_INSERT_INFTY or RH_UPDATE_INFTY for personal information / other infotypes updates
However, I have no idea on how to automate updates of OM. Please kindly share your thought, thank you!
Best regards,
Anne

As I known , there is a interface tool named as IDOC.For more information , please ask your abap team.

How to use a 3rd party source control tool with RoboHelp?

Hello,
I would like to set our RoboHelp users up with source control. They are using RoboHelp HTML 8.0.
Our software developers are using the AccuRev scm system; I'd like the doc team to use AccuRev, too.
Can someone direct me to RoboHelp documentation that explains how to set up and use a 3rd party scm system with RoboHelp?
Thank you,
Marilyn

It appears that RoboHelp 7 only sees the first SCC provider listed in the Windows Registry and ignores the rest. I was able to get RoboHelp to display the File | Version Control menu for SourceGear Vault by setting the following two Registry keys and removing keys for other SCC providers (SourceSafe, Surround SCM, and others I am evaluating).
HKEY_LOCAL_MACHINE\SOFTWARE\SourceCodeControlProvider
     ProviderRegKey = \Software\SourceGear\Vault Client
HKEY_LOCAL_MACHINE\SOFTWARE\SourceCodeControlProvider\InstalledSCCProviders
     SourceGear Vault VS2003 Compatible Client = SOFTWARE\SourceGear\Vault Client
If I create a new RoboHelp project, save it, then select File | Version Control | Add to Version Control, RoboHelp does the following:
     - pops up the Select Version Control Provider dialog and displays SourceGear Vault Classic Client.
     - I select that, check "Make this my default selection" checkbox, and click OK.
     - RoboHelp crashes.
I'm using SourceGear Vault 5.02 under Windows 7 Ultimate 32-bit. A search of the SourceGear Vault knowledge base reveals that they do not support RoboHelp because of its incorrect behavior and instability. It's so sad that RoboHelp can't work properly with industry standard SCC providers. Vault is by far the best SourceSafe replacement out there, and very affordable.

How to import payroll result from 3rd party system to SAP

Hi Experts,
May i know how to import payroll result from legacy system / 3rd party payroll system into SAP.
i need to import the payroll result from Jan - April (from 3rd party payroll system) and system go live on May. I using payroll malaysia.
Thanks.

check this link
http://help.sap.com/saphelp_40b/helpdata/en/91/80e9087834d111a4620060b03c3b0e/content.htm

Can SAP BI (BW) stand alone as a data warehouse for Non-SAP Source Systems.

I recognize that the answer to this question depends on the version of SAP BW we are discussing. My question is one being posed to determine how SAP BW fits in with the BI world and the other tools available.
- Can a company implement SAP BI without also having the SAP ERS applications?
- If so, will SAP BI effectively support 3rd party source systems and what is needed to make it effective (NetWeaver XI, NetWeaver 2004s)?
Thanks for your expertise.
Denny

hi dear,
clearly the most valuable input given by BW is a native integration with all SAP world...
well, you can manage a BW without having a SAP ERP as source system:
http://help.sap.com/saphelp_bw33/helpdata/en/80/1a618ae07211d2acb80000e829fbfe/frameset.htm
(DBconnect, BAPI...)...
Hope it helps!
Bye,
Roberto

R12 Interface table for loading data from 3rd part payroll system

Hi All,
Can anyone help me to have a lists and detailed technical information of available interface table on Oracle R12 for importing/loading data from third party payroll system. And what should be the best way of importing the data? It should be load first to AP then to GL or load it directly to GL?
Any help much appreciated. Thanks.
Cyrus

Hi Cyrus,
Can you please let us know your business requirements of this integration, i.e what business want to acheive out of this integration.
It depends on what your business requirements are wether to send only accounting information from payroll system to your Oracle GL ( then you can integrate Payroll system to Oracle GL directly, by sending the accounting information from your payroll) or if your requirement is to create payroll related invoices in AP and then do payments in oracle AP and then pass accounting information to GL ( then integrate your payroll to AP)
Regards,
Madhav

Error in Previewing data from a UD Source System

Hi,
I have created a data source from a UD Source System; however, when I preview data, I am prompted by this message:
"Inbound processing of data package 000001 finished"
There is no error, but there is also no data preview that is displayed.
Can you help me with my problem?
I look forward to your reply experts!
Regards,
Ramon

Hi,
sampling is out of a directory placed on the CLIENT. On runtime the directory must be placed on the SERVER.
So you must have two locations: one for sampling (*local) and one for (*remote) and before deployment you must switch from _local to _remote.
The _remote location points to a directory on the SERVER, don't forget to grant read/write privileges to the oracle user on the file system.
Regards,
Detlef

Data load from R3 is slow and gives rfc connection error

Hi all, is there any debug capabilties available on BI 7.0 when it comes to debug data load from R3 using rfc connection ( aleremote and bwiremote users )
any ideas where can I look for solution.
thanks.

Hi,
Check the connection between the R/3 and BW.
or It may be the network problem contact system admin or basis people.
thanks,
dru

Anyone know how to upload the HTS files from 3rd party provider to GTS??

We are having following files provided by 3rd party provider - CUSTOMS Info
NAFTA ROO
U.S. HTS
Per provider, SAP has developed a system so that GTS users can automatically reclassify items that are effected by a change and they have asked us to program the HS data needed.
Anyone know how to do that?
Please advise,
Appreciated.

Hi Reddy,
Thanks for your input firstly, and i still need ur advise on the HTS upload.
1. Below is the HTS files provided by 3rd party company. and I noticed that there is 3 types of files. "DTR" , "Nom" and "Txt". Could you explain what are they? and If I need to upload them seperately?
2. Follow the procedure your provided - "classification > upload manually HTS codes into GTS system" Actually, I didn't find upload mannually HTS codes into GTS IN THE SAP CUSTOM Managment.
I tried "Load Traiff Code Numbers from XML files" and "Load Commodity code from XML file".
1) "Load Traiff Code Numbers from XML files"
2) "Load Commodity code from XML file".
   a) Select all files.
        - fill in "Data Provider",
        - "XML Files"-All files selected.
        - check " Output list", "simulation mode" "Nomenclature Active" and "Activate All Text Types"
        - no "Alternative Numbering Scheme" selected, and other selected.
        Error msg found:
        - Unable to find any defined structures for tariff assignment rule set "_DHSCN"
        - Incorrect order. Enter the first file(see long text)
    b)   only select "HSCN_Txt_I_00002001001.xml", the other is the same like bove.
          1. prompted to select a "From-Time Zone",   Select "UTC+8"
          2. Simulation was carried out successfully
    c) only select "HSCN_Nom_I_00002001002.xml", the other is the same like above.
          But I meet error for this file: "Incorrect order. Enter the first file(see long text)"
    d) only select "HSCN_DTR_I_00002001007.xml", the other is the same like above.
          meet error msg:
          "Unable to find any defined structures for tariff assignment rule set "_DHSCN""
HTS xml files of China from 3rd party provider
+++++++++++++++++++++++++++++++++++++++++++++++++++
2008-05-02 10:53         7,483,730 HSCN_DTR_I_00002001007.xml
2008-05-02 10:53         7,980,857 HSCN_DTR_I_00002002007.xml
2008-05-02 10:53         7,765,896 HSCN_DTR_I_00002003007.xml
2008-05-02 10:53         7,605,204 HSCN_DTR_I_00002004007.xml
2008-05-02 10:53         7,743,890 HSCN_DTR_I_00002005007.xml
2008-05-02 10:54         8,007,036 HSCN_DTR_I_00002006007.xml
2008-05-02 10:54         3,883,316 HSCN_DTR_I_00002007007.xml
2008-05-02 10:51         6,087,448 HSCN_Nom_I_00002001002.xml
2008-05-02 10:51         4,955,900 HSCN_Nom_I_00002002002.xml
2008-05-02 10:50           260,960 HSCN_Txt_I_00002001001.xml
+++++++++++++++++++++++++++++++++++++++++++++++++++

Duplicate transactions in GL Journals when imported from 3rd party

Hi All,
Normally everyday we receive data from 3rd party system will imported to GL via GL interface tables. A scheduled program 'Journal import' is being scheduled every night which was in error status since last 4 days.
So we have deleted certain transactions from the GL interface tables using delete command and imported the good ones into GL. Now when we see the amount is doubled.
Any ideas. Have we done anything wrong?
This is 11i.
Thankyou in advance,
Sudah

Hi All,
The journals that were imported are in Posted status. We have more journals than expected like almost doubled. what is the fix for this.
Please help.
Regards,
Sudha

Error is data loading from 3rd party source system with DBCONNECT

Similar Messages

Maybe you are looking for