BW query as datasource for segmentation

Hi,
At help.sap.com the following is posted:
"Only use queries that are based on InfoCubes. Queries that are based on ODS objects and BI InfoSets are only partially supported." (http://help.sap.com/saphelp_crm50/helpdata/en/af/d0efa709f811d4b2d70050da3ee986/frameset.htm)
Does anyone of you know what partially means in this case? When is it supported and when not??
Thanks, Camilla

Hi
I think partly means the SAP BW is linked to the CRM Server partly by the Middleware Broker and partly by direct RFC calls and BAPIs.
The BW Adapter extracts data in to SAP BW.
I hope this helps

Similar Messages

ELM as datasource for segmentation

Hi,
Has anybody worked on scenario to use ELM as datasource for segmentation?
When i try to create a datasource n TA: CRMD_MKTDS, I can see the option to select ELM in origin type field. But there is no field to select External list.
My requirement is very simple: I want to segment the prospects acquired .
All inputs are appreciated.
Many Thanks,
Shaik

Hi,
The BP's are located in External file ( spreadsheet ) I want to segment these BP's and then create a TG. Thats my requirement.
In SAP CRM only ELM supports upload of an External file ( as far as i know ) . Hence i created an External list from my spreadsheet and i want to use this list to create Datasource and then an attribute list.
We can easily use this Attribute list in Segment builder to create TG. thats my idea. but in CRMD_MKTDS its not allowing me to create Datasource for ELM scenario.
Please provide your inputs. How can we segment BP's from External list?
Thank you.
Regards,
Shaik

BW Query as datasource for generic extractor...

Hi,
I want to use a BW Query as DataSource for a generic extractor, the objective is fill an InfoCube from the result of that query. It is possible? If can it be done, how?
Thanks.
Enrique.

Hi Enrique,
You can achieve this with the APD. See this for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Hope this helps...

Infoset as datasource for segmentation

Hi,
When I create a datasource of type Infoset, I entered name of the infoset as CRM_MKTTG_BP_ADDR, but there is a field Business Partner, should I enter BUT000-PARTNER (BP No.) or BUT000-PARTNER-GUID (BP GUID) in it? What is the difference between the two?
Regards,
Monica

Hi Monica,
You have to set in this field this: <b>BUT000-PARTNER</b>, this is the number of the partners u are going to filter in the segment builder.
The <b>BUT000-PARTNER_GUID</b> is a field that is a identifier (like an id for the tables) of a partner. In CRM the guid is an identifier of a product, a partner in this case, a document, an order...
For example, the product has a guid also, product_guid.
Hope it helps.
Regards,
Mon.
Mensaje editado por:
Mon

BW Query as datasource for the context of a WD

Hi all,
I would like to implement the following scenario:
Inside a WD I configure a set of parametrs for a query in BW. Then I want to call the web application with that query, deliver the parameters to the query and the BIApplikationFrame should then insert the result (which consists of a structure) into the context of the calling view.
Did anyone implemnt this scenario already.
Does anyone have comments, HowTos or other experiences related to that scenario and could this please share with me?
Thanks the lot

Hi Petra,
You can use XMLA (MDX) /people/prakash.darji/blog/2006/09/04/work-with-xmla-web-service-for-bi-data-in-external-applications
See
http://help.sap.com/saphelp_nw04/helpdata/en/a6/c0e51914e842e19bda39dbbe4fe78c/frameset.htm
BI Xmla Connector
BI Java Connector Configuration problems
Best regards, Maksim Rashchynski.

Installed Base(ibase) data for segmentation/maintaining customer marketing

There is a need to use Installed Base(ibase) data for segmentation/maintaining customer marketing attributes e.g. whether customer on active support agreement(yes/no), product line, version no., etc.
So if the ibase data is updated, the changes should flow back to segmentation/marketing attributes of the business partner/
Please help with any approach which can be useful in this scenario.
Edited by: ankitarora on May 4, 2011 12:42 PM

Please find the reply for your query,,,,,these are the related information
LIST OF DATA SOURCE
CRM IBase Transaction Data
0CRM_SRV_IBASE_TRAN
CRM IBase Master Data
Technical name: 0CRM_SRV_IBASE_ATTR
Installed Base Category - DataSource for Texts
Technical name: 0CRM_IBTYPE_TXT
Characteristic for IBase or Component - DataSource for Texts
Technical name: 0CRM_IBFLAG_TXT
GUID of Installed Base/Component - DataSource for Texts
Technical name: 0CRM_IBAKEY_TXT
IBase Text Component - DataSource for Texts
Technical name: 0CRM_IBTEXT_TXT
DSO:
CRM Service - Installed Bases and Components
Technical name: 0CRM_IBCO
QUERYS
Installed Base Analysis by Location
Technical name: 0CRM_IBCO_Q0101
Installed Base Analysis by Business Partner
Technical name: 0CRM_IBCO_Q0104
Analysis of Products in Installed Bases
Technical name: 0CRM_IBCO_Q0102
Analysis of Individual Objects in IBase Components
Technical name: 0CRM_IBCO_Q0103
More information
http://help.sap.com/saphelp_nw70/helpdata/EN/ef/c4e1edcb84fa4abd6ddd00130de600/frameset.htm
For more information, see the CRM documentation under mySAP Business Suite à mySAP Customer Relationship Management à CRM Enterprise à Analytics à Service Analytics.
Regards
Srini

Creation of DataSource for FlatFile Interface in BI 7

Hi Y'all!
Can anyone please give me urgent assistance in creating/defining a DataSource for the FlatFile Scenario in BI 7.0. I've been trying to no avail. I certain I am doing this incorrectly, as such I seek your assistance. Can anyone please be so kind as to give me a step-by-step walkthrough of the specific individual steps (in sequence) in creating/defining DataSources... Also can this be accepted as a character (08-MAY-07)?
Much thanks!
Philips

Hi,
The following step can help you..
1. create a info source and assign the data source -
2. select data source as PC File ( give any name tech & desc)
3. create a info source structure by include all individual info objects / har. keyfig
    those are available in your file
4. you can always take the reference of the info objects from the cube/ODS as to
    make info source staructure easy
5. map the corresponding info objects in the trasfer structure
6. save and activate the info source
7. go to your info provider cube/ODS and right click - select - create update rules
    select the name of the file data source name as given above
8. map them as defult one-to-one mapping until other wise you have some require
    ment in data manipulation through update rules.
9. save and activate.
10. come to the info source - create a info package - select source as .CSV file
     and preview it before you actually load.
11. as far as date is concern in your falt file..select the entire column of the date
     then goto-format column-select 'customize' then put format as 000000 (six
     zeros ) for 0calmonth.
12. when you lookat the date at infoprovider it shows like 20070508 but
      when you execute in a query it displays its text as 08-May-2007
I hope it would help you to understand and get your purpose solve.
Thanks=points.
Cheers.

An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
Praveen

Hello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan

Using InfoSets as Data Source for segmentation

Hi Experts,
I'd like to use my own InfoSet as Data Source for segmentation.
The goal is, for example:
Select all BPs who have Leads (Just simple one to describe my question).
So I've created new InfoSet which joined tables:
CRMD_ORDERADM_H
CRMD_LINK
CRMD_PARTNER.
The question is how should I restrict the InfoSet to use only object type "CRM Lead" (CRMD_ORDERADM_H = 'BUS2000108') and partner function "Activity partner" (CRMD_PARTNER-PARTNER_FCT = '00000009')?
I've managed to do this by small addtitional coding in Record Processing in the InfoSet as:
CHECK crnd_orderadm_h-object_type EQ 'BUS2000108'
AND crmd_partner-partner_fct EQ '00000009'.
But it seems that it's not the best way (and no the best practise's one) because all records from the joining are processed and for each of the record this conditions are checked.
It'd be better, I think, to put this conditions as selection options. But it doesn't work (or I didn't do it properly). What I've done is: I've made them as selection criterions in my InfoSet and put default values for them. But segment builder didn't use them (default values) as I can see.
Appreciated for your any advices.

Hi Monica,
Ofcourse query will be written by BW consultants but the requirement should be passed on by Business. CRM Functional Consultant responsibility is to understand the Business requirement and should guide BW consultants. Also make sure that BW system is in the CRM landscape for such requirement.
regards
KK

Standard Datasource for Payment & Proposal List (S_P99_41000099)

Hello,
Looking for standard datasource in SAP R/3 for Payment List and Proposal List.
The R/3 Query is S_P99_41000099. The fields for this query are coming from PAYR and REGUH tables.
If we have any standard datasource available, then we can use that otherwise i have to go for database view and
create a generic datasource on the view.
I have another issue too, basically i'm also working on Check register Query, and we have ECC 6 (Net-weaver 4) and the standard datasource for Check register is available from ECC 6 SP-3 onwards. Do we have any other alternative for this? Installed the BI content for BW objects as we have 0FIAP_C50 available. But wondering how to work on the back end datasource. In the check register query, we have all the fields coming from PAYR Table.
Please can someone please guide me on this?
Thanks
Vandana

Hi,
There is no standard datasource on PAYR table.
Check the below thread -
PAYR Table Data source
Regards,
Geeta

One Query, Two Datasources

Is there a way to run a query on two separate datasources? I
would like to compare the data in two separate MS Access databases.
Thanks.

You won't be able to combine two datasources in one cfquery,
so one way might be for you to query each datasource, then compare
the two results using a Q-of-Q.
Phil

ORA-01658: unable to create INITIAL extent for segment in tablespace

NEW REPOSITORY INSTALLATION ERROR!!
I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
After pressing the Install button in the RAU:
-I take public synonyms
-I scheck the box for "Support Designer Objects", then
-The Repository size is Medium
-I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
After Starting, the Installation began an stop by installing some Tables like schown :
Operation: Started : 07/03/04 20:26:32
Reading File: cktabs.sql
Object : TABLE CDDL_TMP_TBL
Executing statement(s)...
Verifying...
.and so on till....uns so weiter bis
Reading File: cktabs.sql
Object : TABLE RM$INFO
Executing statement(s)...
Error Submitting Definition: User intervention required...
RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
Dumping Buffer...
CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
...End of Buffer
User Requested: Stop Process
When I read the Help of the Error the
CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
-pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
-And the installato still stop with the same Error.
Question: How schould I resolve this Configuration?
You could respond in ENGLICH, GERMAN or FRENCH
Thank you for your Help!

You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
Regards
Sue

KEU5 – It does not found senders (emisor) for segment.

Dear Expert Sap
Please, I try to explain the following scenary :
I had created one purcharse using ME21N transaction, that it had one service and imputation on cost center (CeCo)
I had created document using ML81N and accepting.
I can lookup posting document FI and it is correct.
I can lookup posting document profit center cost
But it did not create posting on COPA. Because It did not have configuration or specified OKB9: Cost Ctr (KSTAR) assigned - > Cost element master (KOSTL).
When I am excuting this report S_ALR_87013611 - Cost Centers: Actual/Plan/Variance.
I are seing income as statistical posting under cost centres.
Cost centres cannot have 'real' income postings. It is correct.
Because Cost Ele category is equal “12” and (Cost Ele category 11 or 12) are posted AS statistical on cost centers.
Finally:
Bussines need that "posted as statistical on cost centers" => it should create on COPA.
We are thinking that we can using a cycle in KEU5 transacction.
But whem we are executing transaction KEU5 son it get this message:
– It does not found senders (emisor) for segment.
Unfortunately, I am not found one note oss.
Could you check this and recommend the best option? or could you recommend any note oss, please?
All your recomendations will be welcome.
Thanks a lot for your recomendation and help.
Best regards,
Gustavo Hermoza

Thank you very much for your answer, Ronghua!!!
I am thinking about your recomendation about using substitucion (OKC9) to derivate the PAOBJNR as reael account assignment.
It will probably be good idea but Step(Okc9) does not derivate or move characteristics to RKE_GET_ACCTNR Function. Because we dont not know this characteristics.
We had reviwed cost line items for cost center and we are seeing that all document are Material Document and this document dont have fields to derivate characteristics.
Another alternative:
Transaction KA02 change category element.
Field change CElem Category is not possible (transaction data already exists)
Diagnosis
To ensure the consistency of existing data, you can only change object CElem Category if no transaction data exists in the change period; that is, neither plan data nor actual data has been posted.
As transaction data already exists, it is not possible to change objects in this time period.
Procedure
If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...".
I want to show this post it is good.
Profitability segment - ERP SD - SCN Wiki
Thanks a lot for your recomendation and help.
Best regards,
Gustavo Hermoza

DataSource for FAGLFLEXT and BSEG, or New Table in ECC6?

need to create an extractor to have all the information of FAGLFLEXT, because we need to keep the ledger information and the split of the information. However, we need to add 13 fields contained in BSEG.
Therefore we thought to reads the line items table FAGLFLEXA, and then enhace it throught BSEG table.
However, since we are using ECC6 and BI7. It is not support the creation of DataSources for FAGLFLEXA throught FAGLBW03.
Is it an option to incorporate all fields into FAGLFLEXT.
Can we creat a new table group based on FAGLFLEXT, and then adding the coding block extensions to that table -
how does new g/l and the new table group work in parallel? Which is the procedure to do it?
Documentation says we can create a new table group based on FAGLFLEXT --- its the how does it work in conjuction part...for example...the new g/l handles document splitting and one other thing georg referenced last night...will the split documents go into our new table group?
BSEG does not have the document splitter information that we need (it's incomplete data). It's missing profit centers on many items, it's missing the proper split of transactions.
Thanks for your comments.

Here is more information about this post.
Client situation: Our client is implementing ECC 6 and is using the "New-GL" features. Because of business requirements, the coding block has been extended (not insignificantly - 18 extra fields at the moment) to accommodate legal, regulatory and management reporting. The reporting solution includes standard ECC reporting (e.g. report writer, report painter reports) as well as feeds to BW (BI 7).
The Challenge: Our understanding is that adding all of the coding block extensions to the New-GL tables (ie. FAGLFLEXA and FAGLFLEXT) may lead to performance degradation in the ECC system. However, we still need to accommodate the requirement to report by the additional dimensions that are not currently included in the New-GL, so our challenge has been to find a solution that minimizes performance issues, while still allowing us to have all the necessary dimensions with which to do the required reporting.
What we would like to know: How have you handled this in similar situations?
Have you added to the New-GL tables? How many fields? Performance issues encountered?
Have you created additional table group(s) based on the New-GL and then modified that structure to have the new fields? How does the additional table group work co-incident with New-GL (e.g. does the additional table group receive document splitting information?)?
Have you created custom extractors for BW? On what basis (we understand that FAGFLEXA cannot be created as a datasource to feed BW)?

Require Standard DataSources for Purchase Orders

Hi,
Please provide me the standard datasources for purchase orders to get the data updated automatically in a BI System.
I have to display report containing the purchase orders details of each day.
Regards
Sunil Kumar

Hi,
Following link will give you complete details of purchase order deports and data sources.
http://help.sap.com/saphelp_nw70/helpdata/en/df/cfb839f6a7a307e10000000a11402f/frameset.htm
Regards,
Vishnu

BW query as datasource for segmentation

Similar Messages

Maybe you are looking for