Creation of DataSource for FlatFile Interface in BI 7

Hi Y'all!
Can anyone please give me urgent assistance in creating/defining a DataSource for the FlatFile Scenario in BI 7.0. I've been trying to no avail. I certain I am doing this incorrectly, as such I seek your assistance. Can anyone please be so kind as to give me a step-by-step walkthrough of the specific individual steps (in sequence) in creating/defining DataSources... Also can this be accepted as a character (08-MAY-07)?
Much thanks!
Philips

Hi,
The following step can help you..
1. create a info source and assign the data source -
2. select data source as PC File ( give any name tech & desc)
3. create a info source structure by include all individual info objects / har. keyfig
    those are available in your file
4. you can always take the reference of the info objects from the cube/ODS as to
    make info source staructure easy
5. map the corresponding info objects in the trasfer structure
6. save and activate the info source
7. go to your info provider cube/ODS and right click - select - create update rules
    select the name of the file data source name as given above
8. map them as defult one-to-one mapping until other wise you have some require
    ment in data manipulation through update rules.
9. save and activate.
10. come to the info source - create a info package - select source as .CSV file
     and preview it before you actually load.
11. as far as date is concern in your falt file..select the entire column of the date
     then goto-format column-select 'customize' then put format as 000000 (six
     zeros ) for 0calmonth.
12. when you lookat the date at infoprovider it shows like 20070508 but
      when you execute in a query it displays its text as 08-May-2007
I hope it would help you to understand and get your purpose solve.
Thanks=points.
Cheers.

Similar Messages

Message "Creation of DataSources for SAP source system is not permitted"

Hi,
I am in DW Workbench: Modeling and I need to copy a DataSource.
It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
What can I do?
Thks

Hii.
You can not copy the standard datasource to any other source system it will not allow you to do that.
But if you want to copy you can copy it to PC FILE source system.
It will allow you to copy there.
Right click in Datasource->Copy-> Give Target datasource name -
> intarget Source system tab -
>Give Source system for File.
Thanks
Mayank
Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

How to create DataSource for FlatFile Source Systems

Hi,
I am practicing BI7.I am familiar with BW 3.5 but while practicing BI7 i am facing some problems.I am trying to load master data of an infoobject (STUDENTID) STUDENTID ATTR.
After creating Appl Comp and when i am trying to create transformations for the master data attribute i am unable to assign data source.I came to know that i have to create datsource at this step.But dont know how to create datasource for FlatFiles.
Can anyone give me stpes how to create DataSource.
Thanks in advance,
Sunny

Hi
Find below help link for procedure
http://help.sap.com/saphelp_nw04s/helpdata/en/43/01ed2fe3811a77e10000000a422035/frameset.htm
and below are some help links which will be usefull in BI7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Look at this new features in Bi 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
how to's in BI 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Demo's
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
Report designer new component
Most of ur solutions u can get through help or SDN search
Regards,
Ravi

Question about Creating DataSources for FlatFile Data Acquisition

Hello eveyone,
I am trying to create flatfile datasources. I've been checking out the existing ds in my dev system and there are some infrastructure here that have loaded data in them, all via their won flatfile DS. I've been looking at the DS and am trying to figure out logic in which they are defined. I saw that most of the fields are defined in CHAR even if they pertain to fields like quantity, Amount and so on... They are also in the Internal format. Yet they have been successfully loaded...
My question is: what are the rules of thumb in defining the DS? How do i go about in mapping the fields to objects in the system? Can anyone please give me the step-by-step scenario as to how to do this please?
Many thanks,
Philips

Hi Philip,
Pls. try the following steps ..may be helpful.
1. when ever you want to create a flat file structure..keep in mind that, what are
    fields data available in your file. second thing is you need to know the IO of
    the info provider in which you are uploading.
2. simply create your own DS with PC File, and other hand open up your infprovider, and keep on check with your flat file what is the sequence of the data
fields and what are they corresponds to in the cube/ODS
3. As your flat file sequence, keep on identify the related IO of your provider and
copy it individual and paste it in your infosouce one by one as sequence of your
flat file..
4. No need to think of what type of data it is and how it is..
5. simply copy all your correponding IO (what ever of their type) even including
    some of the ref. IO.
6. And finally save and activate your DS creation.
I hope it would help in creating your own Flat File DS.
Need further info revert...
Cheers,
Thanks=Points.

Creation of DataSources

Guruji's:
I am in a lab environment for BI7 ECC 6....trying to follow basic steps for ETL exercize in BW modeling document. I have no basis support and there are no other users in this lab.
Please if you don't feel like reading the whole thing just read part 1 below, I am just being as detailed as possible.
1: If I go into tcode SBIW, I am able to create a generic datasource only if I select an existing SAP-based Application Component. However it then does not appear under said application component when I browse or search for it after it has been saved.
2: If I try to create my own application component, on the other hand, and create the datasource using this created one (while in t code sbiw) I get a message "there is no application component x" (x=name of whatever application component I am using.
3: I tried a workaround: In the workbench when I go to create a datasource by clicking on the button for datasource at the top and I go to create a datasource I get the mssg "creation of datasources for the sap source system T90CLNT090 is not permitted"
I have tried: creating application components under sap-based application components as well as by themselves and nothing seems to matter.
Note: This problem seems sporadic, as I was able to finally create a datasource but after I replicated and activated it and went in to create a transformation, the datasource tables didn't show up at all on the left, only the table from the infoobject characteristic load.
I presently have no usable datasource and am starting from scratch.
Thanks a lot

I am editing this post because there have been changes:
1. Yes there are already standard datasources.
2. No I haven't done any initial settings...so I went to the Transfer Business Content DataSources thru sbiw but didn't see anything to select "execute"....so I try something...I went back Transfer Business Content DataSources and chose "content delta" and it says 'comparison bct <-> cust version ' then it counted thru several objects for a few minutes and finished with no warnings. then I selected each datasource under co-om-cca and activated those with no problems.
3. went to rsa 5 and again activated each datasource again for c0-om-cca.
i am still unable to see one of the two datasources i have created on the workbench but when i go to rsa6 both of my two datasources are showing.
when I try to create my generic datasource under my own application component it again does not recognise my application component so same problem...
4. when i try to create came generic datasource using co-om-cca application component i get mssg that it saved
5. but again when I look under the application component it is not there.
6. when i try to replicate datasources for t90clnt090 source system (rt click on source system name and select replicate datasources) it hangs up for several minutes and eventually my session terminates. it has always been like that.
Edited by: natalie marma on Apr 6, 2009 10:49 PM

DataSource for FAGLFLEXT and BSEG, or New Table in ECC6?

need to create an extractor to have all the information of FAGLFLEXT, because we need to keep the ledger information and the split of the information. However, we need to add 13 fields contained in BSEG.
Therefore we thought to reads the line items table FAGLFLEXA, and then enhace it throught BSEG table.
However, since we are using ECC6 and BI7. It is not support the creation of DataSources for FAGLFLEXA throught FAGLBW03.
Is it an option to incorporate all fields into FAGLFLEXT.
Can we creat a new table group based on FAGLFLEXT, and then adding the coding block extensions to that table -
how does new g/l and the new table group work in parallel? Which is the procedure to do it?
Documentation says we can create a new table group based on FAGLFLEXT --- its the how does it work in conjuction part...for example...the new g/l handles document splitting and one other thing georg referenced last night...will the split documents go into our new table group?
BSEG does not have the document splitter information that we need (it's incomplete data). It's missing profit centers on many items, it's missing the proper split of transactions.
Thanks for your comments.

Here is more information about this post.
Client situation: Our client is implementing ECC 6 and is using the "New-GL" features. Because of business requirements, the coding block has been extended (not insignificantly - 18 extra fields at the moment) to accommodate legal, regulatory and management reporting. The reporting solution includes standard ECC reporting (e.g. report writer, report painter reports) as well as feeds to BW (BI 7).
The Challenge: Our understanding is that adding all of the coding block extensions to the New-GL tables (ie. FAGLFLEXA and FAGLFLEXT) may lead to performance degradation in the ECC system. However, we still need to accommodate the requirement to report by the additional dimensions that are not currently included in the New-GL, so our challenge has been to find a solution that minimizes performance issues, while still allowing us to have all the necessary dimensions with which to do the required reporting.
What we would like to know: How have you handled this in similar situations?
Have you added to the New-GL tables? How many fields? Performance issues encountered?
Have you created additional table group(s) based on the New-GL and then modified that structure to have the new fields? How does the additional table group work co-incident with New-GL (e.g. does the additional table group receive document splitting information?)?
Have you created custom extractors for BW? On what basis (we understand that FAGFLEXA cannot be created as a datasource to feed BW)?

No key field found for creation of DataSource - Classification Datasource

Hello,
While trying to create a clasiffication datasource based on 0PLANT_ATTR, when i assign a characteristic and push the DataSource button, i get the following message:
No key field found for creation of DataSource
Diagnosis
During generation of a classification or configuration DataSource, only those key fields for the object table (field "Obj.Tabelle") that are already present in the basis DataSource transferred to the extract structure. This is the case when none of the key fields of the object table were found in the structure of the basis DataSource.
System response
A DataSource cannot be created without key fields. The action was cancelled.
Procedure
Check whether you have selected the correct basis DataSource and object table. For more information, please see SAP Note 569849.
Do you know what can be the problem?
Thank you and regards

Hi Alberto,
plants are a special case. The key which is used for the classification
of plants (object type BETR) is not the same as the key which is used in
datasource 0PLANT_ATTR.
BETR has key LOCNR (Site). That's a customer related to a plant. The
customer number will be extracted in field LOCNR.
0PLANT_ATTR extracts the plant in its key field WERKS.
Transaction CTBW and the generic extraction program for classifications
don't know the relationship between LOCNR and WERKS. So they cannot map
them.
I do recommend a solution which would add the mapping between
LOCNR and WERKS:
1. Create please the classification datasource as intended, but use
datasource 0RT_LOC_MGR_ATTR as basis datasource. It's the only
datasource of the content where LOCNR is a key field. So
0RT_LOC_MGR_ATTR is used as a dummy here, to allow transaction CTBW to
create the classification datasource. It's not necessary to extract
data with datasource 0RT_LOC_MGR_ATTR.
2. Extend please the extract structure of the created classification
datasource. Add please field WERKS using component type WERKS_D. Make
this field visible.
3. Fill field WERKS in the extractor user exit EXIT_SAPLRSAP_002. WERKS
can be read from table KNA1 by using the customer number extracted to
LOCNR to select on field KNA1-KUNNR.
4. Transaction CTBW_META on the BW system isn't able to append the
characteristics from the classification datasource to infosource
0PLANT, because the keys are different. So create please a new info
source with CTBW_META. This allows CTBW_META to create the info objects
for the characteristics used in the classification datasource.
5. Add please the characteristics used in the classification datasource
to infosource 0PLANT manually. You will find the info object names of
the characteristics by looking up the characteristic datasources which
are assigned to the classification datasource in transaction CTBW. From
these names you can derive the info object names:
1CL_A... -> C_A...
6. Disconnect the infosource which has been created with CTBW_META from
the classification datasource.
7. Connect please the classification datasource to infosource 0PLANT
Use following info object:
info object   field
0PLANT       WERKS
The info object names for the characteristics are explained in step 5.
8. Add an infopackage to infosource 0PLANT for the classification
datasource.
Now the extraction of classifications of sites should work.
Best regards,
Rolf
P.S. I saw the system messed it up and doesn't display any new and empty lines. Sorry, I hope you still can read it.
Edited by: Rolf Doersam on Mar 26, 2010 6:56 PM

Creation of Server Proxy for Message interface with External Defination

Dear All,
I am getting a problem while generating a server proxy for the inbound interface . The request message used in the inbound interface is a external definition which is uploaded using a XSD file. The XSD file was supplied by a third party which is having very high complex strucuture and used lot of abstract data types in the design. When i tried to generate the proxy in the R/3 system (Transaction SPROXY) for the inbound interface i am getting following error.
Interface uses external and internal message definitions
Message no. SPRX122 *
Diagnosis
In a message interface you can use messages from different sources:
Message types and fault message types edited in the Enterprise Services Repository
Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Enterprise Services Repository.
Please guide me, how to generate the proxy for the interface with external defination message. I could nt geneate manullay, because it is having very high complexity and its a big structure.
Is there is any way to generate the proxy for interface with external definition
Regards
Vijayanand

Hi,
i. Import your message schemas from external definitions, or RFCs or IDocs from SAP systems. These definitions already contain data types.
ii. Create a message interface and reference the messages of the external definition, or the RFC or IDoc message.
Check this, it may help you
http://help.sap.com/saphelp_nw04/helpdata/en/3f/01623c4f69b712e10000000a114084/content.htm
REgards
Seshagiri

Error during creation of datasource using BI publisher

Hi All,
I have installed BI publisher 10.1.3.4.2 from http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.html for linux - 32/64.
I am able to see the reports under Reports tab in BI publisher. But need datasource to get actual data. During the creation of datasource, tried Driver -11, 10 and driver class oracle.jdbc.OracleDriver, oracle.jdbc.driver.OracleDriver but all the time error is coming -
[100512_022947829][][EXCEPTION] java.sql.SQLException: ORA-28040: No matching authentication protocol
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:277)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOsesskey(T4CTTIoauthenticate.java:243)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:304)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:430)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.apps.xdo.servlet.data.JDBCDataSource.testConnection(JDBCDataSource.java:268)
at oracle.apps.xdo.servlet.ui.admin.datasource.UpdateConnectionServlet.doConnectionTest(UpdateConnectionServlet.java:411)
at oracle.apps.xdo.servlet.ui.admin.datasource.UpdateConnectionServlet.doPost(UpdateConnectionServlet.java:151)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:100)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Not sure if I need to install or configure any other thing.
Please let me know how can I proceed?
Regards,
Sourabh
Edited by: 963380 on Oct 7, 2012 7:48 AM

The error is described here: http://oracledocs.shu.ac.uk/oracle/B28359_01/readmes.111/b28280/toc.htm#autoId36 , so talk to your DBA about setting the appropriate authentication protocol version.

Creation of DataSource

Hello Techies,
I am very new to ejb.
I am trying to create a DataSource in weblogic.
I am having weblogic 7.0 n using mysql as DataBase.
I am using mysql-connector-java-3.0.17-ga.jar file to connect mysql from java.
I had modified the script of startWLS.cmd which is present in the following path
C:\bea\weblogic700\server\bin
set CLASSPATH=%JAVA_HOME%\lib\tools.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%WL_HOME%\server\lib\mysql-connector-java-3.0.17-ga-bin.jar;%CLASSPATH%
Now i had placed this mysql-connector-java-3.0.17-ga-bin.jar in to
C:\bea\weblogic700\server\lib
I am having few doubts regarding creation of DataSource.
Now after this on i opened the console n created a connection pool
The details are of connection Pool are as follows::
GENERAL::
Name : ramukkpool
url : jdbc:mysql://localhost:3306/test
Driver Classname: com.mysql.jdbc.Driver
Properties :
user = root
Password = XXX
>> create
TARGETS::
i had shifted myServer from left side to right side n clicked >>Apply
(Techncially can we say this as deploying the connection pool into server ???????????
If not how to deploy the connection pool into server??)
I did not get any errors in the console.
Now i am creating a datasource
CONFIGURATION:
Name : ramukkDataSource
JNDIName: jdbc/ramuJndi(Does we have to follow this convention only?? i.e JNDIName should start with jdbc/ only)
PoolName: ramukkpool
createTARGETS::
I had shifed myServer from left to right n >>Apply.
Now also i did not get any errors in the console.
Does this means I had created DataSource successfully.
How to deploy the DataSource into server??
regards,
ramu.

Hi Ramachandran,
Follow the link given below, you will get one tutorial named "How to access the Car Rental Web Service?" for the same thing. This application is creating Datasource and also tables in WAS, and accessing that databse table from webdynpro as well as J2ee application.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/web dynpro tutorial and sample applications.faq
Also you can get documentation for the same in Help content of your Netweaver developer studio.
Regards,
Bhavik

Exception occurred. Internal error: Cannot obtain XAConnection Creation of XAConnection for pool....

Weblogic Server 6.1 SP2 is running fine. But unable to get XAConnections! I am getting following error
java.sql.SQLException: Internal error: Cannot obtain XAConnection Creation of XAConnection for pool ibesXaConnection Pool failed after waitSecs:300
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1063)
at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:148)
at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:236)
at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
-GoutamG

Hi Gautam!
Please make sure your refresh minutes is turned off in config.xml. You should put very large value like 999999 for RefreshMinutes parameter for
defination of connectionpool in config.xml instead of 0.
Thanks,
Mitesh
Goutam wrote:
Weblogic Server 6.1 SP2 is running fine. But unable to get XAConnections! I am getting following error
java.sql.SQLException: Internal error: Cannot obtain XAConnection Creation of XAConnection for pool ibesXaConnection Pool failed after waitSecs:300
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1063)
at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:148)
at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:236)
at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.java:135)
at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:76)
-GoutamG

How to create a datasource for 0COSTCENTER to load data in csv file in BI

how to create a datasource for 0COSTCENTER to load data in csv file in BI 7.0 system
can you emil me the picture of the step about how to loaded individual values of the hierarchy using CSV file
thank you very much
my emil is <Removed>
allen

Step 1: Load Required Master Data for 0CostCenter in to BI system
Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
Step 4: Mapping
Create Text Node thats the first node (Root Node)
Insert Characteristic Nodes
Insert the Last Node of the Hierarchy
Then you need to create a Open hub Destination for extracting data into the .csv file...
Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
Thanks,
Sandhya

No Implementing class registered for the Interface : ES-TransportationOrderSCMExecutionRequest_In

Dear PI Experts,
I'm currently working on an integrated solution between TM <=> PI <=>ECC. When I trigger the Shipment creation from TM to ECC, I received an error in the SXMB_MONI of ECC.
In the XML, I figured the error that No Implementing class registered for the Interface TransportationOrderSCMExecutionRequest_In .
May I ask you advices on this issue? Is it a mapping error on ECC or PI Side?
Thanks in advance for you help and advice.
Kr,
JP

Hi JP,
you can also refer the below wiki and blog
Step-by-step FTP to ABAP Proxy - Process Integration - SCN Wiki
ABAP Proxy Protocols: Use Cases and Examples
regards,
Harish

Multiprovider as Datasource for Open Hub Destination

Hello,
Can you pls let me know if we can used the Multiprovider as datasource for the Open Hub destination. Currently we are Bi7.0 and SP9. I am not able to see the option of Mutiprovider in the template.
Appreciate the input ASAP.
Thanks
Gopal

Multiprovider is not yet supported for Open Hub destination and hence you dont see that option.
As of SAP NetWeaver 2004s SPS 6, the open hub destination has its own maintenance interface and can be connected to the data transfer process as an independent object. As a result, all data transfer process services for the open hub destination can be used. You can now select an open hub destination as a target in a data transfer process. In this way, the data is transformed as are all other BI objects.
In addition to the InfoCube, InfoObject, and DataStore object, you can also use DataSources and InfoSources as templates for the field definitions of the open hub destination.
The open hub destination now has its own tree under Modeling in the Data Warehousing Workbench. This tree is structured by InfoAreas.
<b>Restrictions -</b>
It is not currently possible to use MultiProviders as the source for the open hub destination.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/7c836c907c7103e10000000a1553f7/content.htm
Hope it Helps
Chetan
@CP..

LMS Prime: Disabling Alterts for BRI Interfaces

Hello,
i revceive a lot of Alerts of BRI Interfaces on a router.
EVENT ID               = 000072X
TIME                   = Tue 08-Nov-2011 16:06:44 CET
STATUS                 = Active
SEVERITY               = Critical
MANAGED OBJECT         = 192.168.25.4
MANAGED OBJECT TYPE     = Routers
EVENT DESCRIPTION       = OperationallyDown::Component=IF-192.168.25.4/36 [BR0/0/0:1];ComponentClass=Interface;ComponentEventCode=1075;AdminStatus=UP;DuplexMode=FULLDUPLEX;OperStatus=DOWN;MaxSpeed=64000;Type=DS0;Mode=NORMAL;IsFlapping=false;InterfaceCode=CODEUNKNOWN;LastChang
NOTIFICATION ORIGINATOR = Fault Management Module
how can i get rid of them?
i already searched in Monitor > Fault Settings > Setup > Threshold Settings
but i didn't found where i can disable Operationally Down messages for certain interfaces.
thanks
alex

Hi Michel,
i tried to modify the tpmgr-param.conf file and added this entry IFDescrPattern-.1.3.6.1.4.1.9.1.1045 *~Bearer Channel*. But still I receive the messages.
#This is an example of how to restrict the creation of ports for a
#specific sysObjectId based on the ifType:
#IFTypePattern-SwitchPort.1.3.6.1.4.1.9.1.501 53
IFDescrPattern-.1.3.6.1.4.1.9.1.1045 *~Bearer Channel*
# Add Fiber Channel port (56) for MDS devices
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.380 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.376 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.375 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.414 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.411 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.442 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.612 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.12.3.1.3.719 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.1.475 6|26|56|62|69|117
IFTypePattern-SwitchPort.1.3.6.1.4.1.9.1.407 6|26|56|62|69|117

Creation of DataSource for FlatFile Interface in BI 7

Similar Messages

Maybe you are looking for