BW upgrade - pre and post upgrade reports

Hi All
Quick question please.
We plan to upgrade our BW ABAP system from NW 731 SPS7 to NW 740 SPS6.
I read the ASU toolbox note 1000009 and can see that there is no file for our scenario i..e from 73X to 740 so note 1734333 is the way to go here when prompted for ASU toolbox run. However within the note 1734333, it states "This note requires that all pre-requisites for the BW-related system copy automation are met according to note 1707321". When i read 1707321 it talks about installation procedure for PCA which is part of LVM, a licensed software. We don't have this license.  Hence I am wondering if note 1707321 is applicable for us at all or is it that this note would bring about changes in the system and sets up a staging area upon which the Z report from the other note(1734333) builds and then creates task list for pre and post upgrade. I am certain that we will have to implement Z report from note 1734333 however the reference to note 1707321 has created some confusion.
Also once we implement the Z report from 1734333, the note says, the report needs not be transferred but the objects generated need to be. Would the author here referring to reports - SAP_BW_BEFORE UPGRADE and SAP_BW_AFTER UPGRADE and having them recorded into a transport.  Any thoughts here please.  If the author is indeed referring to these reports only, how do we know this will show up in quality systems via STC01 as input options.
Regards
Kalyan

I re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note.  Have I comprehended it correctly
Regards
Kalyan

Similar Messages

  • Pre and post-upgrade tasks in BW for Upgrading R/3 4.6c to mySAP ECC 5.0

    We are currently in the process of migrating our R/3 4.6c System to mySAP ECC 5.0.
    We would appreciate if anyone could provide the major and minor
    Changes / impacts / measures, to be taken in BW side.
    <u><b>Questions:</b></u>
    1. What are the major impacts on the extractors, mainly delta?
    2. Do we need to activate all the datasource immaterial of its status?
    3. Steps to be taken for Unicode conversion
    4. Routines and structure change if any?
    5. Is there any change in DDIC objects?
    6. Any old methods that can be replaced by new methods? (for better performance e.g, LIS was replaced by LO)
    7. Changes in the database.
    8. Anyother issues
    Any relevant document will be helpful.
    Thanks & Regards
    Chandran Ganesan

    It depends on what you are taking about: functional or Technical.
    Tehcnially, after the upgrade you should make sure all the PI are working fine. The other things (i.e. extract)should be able keep the same. Unless you want to take advantage of the new WAS640 functionaity.
    If you plan to migrate your BW system into ECC 5.0, you might have long way to go. 
    Also, depends on your BW release. If it's BW 3.1 or below, you might need to upgrade by end of this year anyway.

  • Pre and Post up gradation checks.

    Hi Gurus,
         Can someone please explain Pre and Post up gradation checks during converting 3.x queries to Net Weaver 2004 version.
    Thanks in advance.

    Hi,
    Check these.
    Upgradation from BW 3.5 to BI 7.0
    Upgrading Bex Queries from BW3.5 to BI7
    Regards.

  • Standard procedure pre and post BW SPS?

    Dear Guru,
    I have looked around but not able to find a good answer on a standard procedure/common practice as one implement BW support pack. After we implemented SPS21 in our production system this past weekend, we had endless data load issues but didn't happen in our test or QA system. I think I need a better list of what to do pre and post SPS.
    Please share your experience on implementing BI support pack. What do you do pre and post SPS?
    Many thanks in advance.
    Chimei Shea

    I re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note.  Have I comprehended it correctly
    Regards
    Kalyan

  • I want pre and post portal installation guide for EP 7.0 ?

    Please give me links for portal(EP 7.0).Installation guide for pre and post installation steps to be followed.

    Hi,
    Refer this thread
    Portal 7.0 Installation Document/Screen Shots
    Portal 7.0 (ECC 6.0) Installation
    Regards,
    Senthil K.

  • Pre and Post for Sends..Confusion?

    Dudes...am I crazy?
    I have 2 tracks. One plays a vocal and one plays a guitar. Both are sent to the same Aux or Bus track with a reverb on it, via the sends on their respective channels.
    If I solo the guitar track, I still get reverb tails from the vocal track on the bus channel as well as the guitar!
    If I switch the vocal track send to "post", then the reverb tails go away for the vocal. By the way, I'm soloing from the mixer channels, not the arrange window.
    Now I understand that if it were the vocal track that I had soloed then switching between Pre and Post on the send would dictate if I hear the reverb tails or not for the vocal track.
    But that's not the track I have soloed! I have the guitar track soloed. So why would I hear reverb tails on a track that's not soloed. And why would the reverb tail go away on the vocal track if I change the send to Post, when that's not the channel I have soloed.
    Am I crazy, or should logic know that if I have a track soloed, it should not play anything else but what's on that track? Regardless of switching from pre to post, if the vocal track is not the track that's soloed, why am I hearing anything from that track at all? I shouldn't have to mute the vocal track or switch it's send from pre to post, just to hear the soloed guitar track by itsself.
    Thanks
    Noah
    G4 Dual 1.42   Mac OS X (10.4.6)   2 UAD Cards/Dynaudio/Martin/U47

    You say you love Logic's "pre/post mute send solo safe function". Sounds like quite a function Does that mean it's changeable in Logic? You make it sound like it's an option.
    By the way, I understand that if you solo a track, it might be cool to also hear it's effects channel without having to solo the bus track its feeding.
    But why would I hear another tracks effects? This only happens when two different tracks have the same bus inserted in their sends. Just because I'm using the same send for two different tracks, doesn't mean I want to hear both sends even if only one track is soloed. That's the part that makes no sense for me. Solo should only address and isolate the track that's soloed and whatever else is related to it (ie...busses/sends/plugs etc..)
    I dunno, I guess when you solo a track it keeps open the bus/send it's using unless your exercise the pre/post send option. And if there's someting else using that bus send as well, it must need to stay open for it too.
    By the way, for me sometimes Logic will continue to play a certain audio track, usually a single track of it's choosing, even if another track is the only one soloed. There are no busses, no plugs, no sends on it, just a straight track and I still have to mute it after soloing some other track. Now that's not right...pre/post etc...is not in the equasion here, can someone explain that?
    Thanks for the help.

  • Self programmed pre- and post trigger

    Hello,
    I am planning a measurement system and search some ideas for programming how to realize it.
    I have an older NI PCI-6024E and want to measure 8 voltage signals with 2 kHz. When task is started it should run some hours without task stop.
    Every 2000th sample (= every second), I want to store this sample (all 8 voltages) into a continuous file with printf.
    For this I do not need the sampling rate of 2 kHz, 1 Hz would be enough but I want to do more:
    Every time when voltage_1 increases over 1.1 V, I want to store all data – and 100 samples before – with 2 kHz into an other file till voltage_1 decreases under 0.9 V – and 100 samples after –. It will be like a self programmed pre- and post trigger with continious running measurement task.
    I think I can work with an fifo-buffer (double fifo[10000 samples][8 channels]) but do not know how to do this on a smart way ;-)
    Do you have any ideas how to mange it?
    chemph

    Hi Chemph,
    since you have to use a DAQmx task to realize the data acqisition you can not change the sampling rate when the task is acquiring data. So I think the idea you mentioned is quite good.
    You can implement a lossy queue so samples are deleted when they are not needed anymore.
    For the logging you can keep keep over 100 samples in the queue and look for the 101st sample if it fits the rage you want. Then dequeue all elements from the queue and save them into a file. Afterwards save all elements in the queue until you find a value that does not match your requirements. Them you save another 100 samples and then continue from the beginning. I guess the file writing can be implemented in a state machine that represents the modi you want to save the measurement data.
    I hope, this helps you with the concept.
    Regards,
    Melanie

  • Pre and post steps of client copy

    Hi,
    There are some client copy official guide?
    I was reading the help.sap.com, but in this guide not appears the pre- and post- steps of the client copy.
    More thanks

    >>If i  use the copy profile SAP_APPL, this steps will not be necessay,no? The user master data from target system will be maintained.
    Yes. You are right. This Profile will not over right the User Master Record. It is given on the document.
    http://help.sap.com/saphelp_nw04/helpdata/en/99/0a2a887e2511d2a6250000e82deaaa/content.htm
    Regards,
    Subhash
    Edited by: Subhash.Chandra on Jun 3, 2011 3:18 PM

  • Pre and Post Aggregation

    Hi BW Guru's
    Can you Clarify what is Pre and Post Aggregation ?
    Thanks in Advance

    Hi Bhima,
    look at http://help.sap.com/saphelp_erp2004/helpdata/en/13/18601823c6ff4daa0bb05b4cded814/content.htm
    In the Time of Calculation field (inside BEx formula properties), you can choose whether the formula is calculated After Aggregation or Before Aggregation.
    see more info in http://help.sap.com/saphelp_erp2004/helpdata/en/6f/56853c08c7aa11e10000000a11405a/content.htm
    and above all in
    http://help.sap.com/saphelp_erp2004/helpdata/en/bb/9e8b6b4d6f0d45b1efb5dfbc3b44a5/content.htm
    Hope it helps!
    (Bhima, don't forget to reward the answers !!!)
    Bye,
    Roberto

  • What is the Difference  Between the  Pre-Upgrade and Post-upgrade in UMT in SAP BO

    Could anyone give me details.

    UMT is used to upgrade and migrate from older version to newer version.
    There is no pre or post migration terms used for UMT.
    Check the guide for more information.

  • Upgrading Oracle Text - Post upgrade step 10.2 to 11.2

    I already upgraded my 10.2.0.4 database to 11.2.0.1 and have to do post upgrade steps. In step 39 of Manual guideline (837570.1) is not clear for me. If some one can explain further would be appriciated. When i check my source ORACLE_HOME/ctx/admin/ctxf102.txt or ctxf102.sql
    Step 39
    Upgrading Oracle Text
    Copy the following files from the previous Oracle home to the new Oracle home:
    * Stemming user-dictionary files
    * User-modified KOREAN_MORPH_LEXER dictionary files
    * USER_FILTER executables
    To obtain a list of the above files, use:
    $ORACLE_HOME/ctx/admin/ctxf<version>.txt
    $ORACLE_HOME/ctx/admin/ctxf<version>.sql
    where version is 920,101,102
    For instance, if upgrading from 10.2.0
    *1. For dictionary files check*
    *$ORACLE_HOME/ctx/admin/ctxf102.txt*
    *2. Execute the script as database user SYS,SYSTEM, or CTXSYS*
    *$ORACLE_HOME/ctx/admin/ctxf102.sql*
    If your Oracle Text index uses KOREAN_LEXER which was deprecated in Oracle 9i and desupported in Oracle 10g Release 2, see below Note for further information on manual migration from KOREAN_LEXER to KOREAN_MORPH_LEXER.
    Note 300172.1 Obsolescence of KOREAN_LEXER Lexer Type

    Hi Srini
    Thank you very much. now i got it.
    Oracle asked me to identify the CTXCAT indexes with KOREAN_LEXER execute the following query as user CTXSYS: if nothing return then i can skip this step.
    SELECT idx_name
    FROM ctxsys.ctx_indexes
    WHERE idx_type = 'CTXCAT'
    AND idx_name IN
    (SELECT ixo_index_name
    FROM ctxsys.ctx_index_objects
    WHERE ixo_class = 'LEXER'
    AND ixo_object = 'KOREAN_MORPH_LEXER ');
    SELECT isl_index_owner,isl_index_name,isl_language
    FROM CTXSYS.ctx_index_sub_lexers
    WHERE isl_object = 'KOREAN_MORPH_LEXER';

  • Pre and Post test Questions

    I have a project that requires a pre-test, post-test and
    knowledge reviews throughout the course. I have created 10 question
    slides (I did not use question pools). I am having two issues occur
    within the course. First I do not want to track or score the
    pre-test questions or the questions embedded within the course what
    I will refer to as Knowledge reviews.
    I do want the user to go through and receive feedback on each
    question answered incorrectly but I do not want a score to be
    collected/tracked or tallied as part of the sum total for the
    course. The post-test questions need to be the only tracked/scored
    questions with that value being submitted to the LMS.
    Currently all the questions are being tallied in the course.
    (i.e test results show 30 questions with a score when there should
    only be 10). What is the best way to include mutiple questions
    within my course (as pre-test and Knowledge reviews) but not have a
    score tracked until the user takes a post test.
    To correct this should I change the pre-test and knowledge
    reviews to a survey type question? Or should I leave the question
    as graded but set the point value to 0. I inially left the pre-test
    and knowldge reviews as graded questions but I deselected Report
    Answers under the reporting tab thinking this would prevent the
    passing of a score, which is not the case.
    If anyone can offer some advice or point me to some
    documentaiton that discusses this I would greatly appreciate any
    help.
    The second issue I have is with the progress indicator within
    the course. Is there a way to revmove this from the quesiton pages.
    My client does not want to see this indicator. The current work
    around I am using is to reduce the font size of the indicator to
    5pt, setting the font color to match my background and then
    positioning the indicator in a set loation on the page. While this
    workaround works I would like to remove it in total if possible.
    Thanks in advance,

    The first part sounds very weird. I just made a project which
    included knowledge checks in the middle of the course and they are
    not tracked in the final test. I used Graded questions in my course
    and I initially set the score per question to 0 points. After I
    found out that they were counted in the question total I removed
    the reporting for each of the questions. Now the points are not
    being counted and also the questions are not being counted in the
    final assesment - I just have the 6 questions out of 6 in the
    post-test even though I have 4 knowledge checks inside the course
    it self.
    Try and click F9 to open up the advanced interaction panel
    and make sure that the answers are not being reported. I know it's
    obvious, but sometimes Captivate does some weird things.
    As for your second question regarding the progress indicator
    you can remove that by going to Quiz - Quiz Preferences - Settings
    and then unchecking the box "Show Progress".
    Best regards,
    Michael

  • Extending the beta!  How to compose and post defect reports.

    There is no such thing as bug-free software, and LR is no exception to that. Even more, v1.0 releases, even those with long beta programs, can be more brittle than expected. We've already seen a few things that look like real defects which could be addressed in a future release. This is normal and expected, and now a team at Adobe will be dedicated to maintaining the LR release into the future.
    This posting is sort of asking the question "how can we help", with a fair bit of opinionated ranting of my own on the subject. Take my comments with a grain of salt, of course, but I'm not sure I say anything that hasn't already been said a million times before.
    Firstly, is there a place where bug reports should be posted that Adobe will see? Is there a document that describes how Adobe would prefer such reports to come in, perhaps with suggestions for supplemental material they'd like to see passed along with the defect report? Not only does this provide a place where Adobe can track raw bug reports, it can make perturbed users feel better, since they've been able to do something specific and active.
    Full disclosure: I am a software developer by trade, and I maintain shipped releases of code for a living. I know how I like to see problem reports and it drives me *crazy* when a we get a vague report formatted with no punctuation, in all lower-case, containing no specific details. Usually these come with bizarre screen-shots embedded into a Microsoft Word file. Not helpful.
    It drives me crazy because I know there is a bug in there somewhere, it just isn't necessarily the bug seen by the end-user or understood at first blush by the developer. I call this the "real bug", and it can be hard to suss out, sometimes.
    I assume that the following basics are /probably/ helpful when reporting defects against LR v1.0:
    - System details. At least the exact platform version and release. Possibly with a short run-down on CPU speed, amount of RAM. Mac users should probably be sure to clarify what CPU they are running.
    - Clear steps to reproduce, if possible. Describe the problem exactly as you see it, being sure to use the language and nomenclature that the application uses. Capitalize app-specific controls exactly as you see them in the app, to make it clear what you are doing.
    Try to reduce the problem to the barest set of operations.
    - For things like "hangs" and "crashes", I'm guessing that most supported platforms have a way of capturing these details. I cannot and will not speak for Adobe. But! if I was looking at a crash or hang, I'd want any and all crash logs (OS X) or Dr. Watson (Win32) that were related to the former and the sample output (OS X) or Process Explorer dump (Win32) for the latter.
    Details on how and where to post defect reports would be nice. Sounds like a FAQ item, at the least!
    Finally, here are some things that drive me crazier and I feel are *not* helpful:
    - Defect reports that intersperse observed behaviour with guesses about what the problem really is. No one knows better the potential places where symptoms could stem from except those people maintaining that codebase. I'm a smart guy and code for a living. I would never presume to know the precise inner-workings of Lightroom without access to the source and probably a run at it in a development environment.
    - Arguing for how terrible or disastrous a particular "bug" is, and how it needs to be addressed as critical for immediate correction. Everyone, including me, finds their own bugs most critical. The problem is that software maintenance requires putting everything into perspective, evaluating each defect on its own merit, as well as how risky a fix for the defect might be. This last part cannot be minimized. Changing code incurs risk. The idea is to carefully shepherd a new release into each new version while maintaining integrity and stability. No matter how bad a bug is, introducing a fix that simply

    I agree with how you think bugs should be reported. For now, I'd suggest posting them here, in detail. Some of us can relay them to the appropriate places, at least until we hear from Adobe personnel about an official location or method for the average end user.
    Lee Jay

  • Merging Itunes folders pre and post computer crash

    I need to figure out how to merge my itunes folder pre-hard drive crash (i was able to retrieve my itunes folder) and post hard drive crash, then I need to put the merged file on my external hard drive or on my mac. Itunes is currently taking of 1/2 of the hard drive space on my pc (40 GB), so it needs to be moved.

    Try this
    http://www.digital501.com/20061019156/merge-itunes-libraries-rsync/

  • Pre and post sql

    Hi xperts,
    what is the functionality of Pre SQL and Post SQL in source Qualifier Transformation??
    Thanks,
    pcs

    Hi,
    Pre SQL is the sql statement to be executed before perfoming the mappings on the target table and post is to be executed after performing the tasks.
    post sql is that if any errors occur we can send an email or write logs to know the error.

Maybe you are looking for