By right clicking on something, I accidentally blocked photos at a website--I want them back but can't figure out how to do it

By right clicking on something, I accidentally blocked photos at a website-- want them back but can't figure out how to do it
== This happened ==
Not sure how often
== I right clicked on block images at a site or something like that.

Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
A way to see which images are blocked is to click the favicon (''Site Identification'' icon) on the left side of the location bar and click the "More Information" button.
This will open the Security tab of the ''Page Info'' window (also accessible via Tools > Page Info).
Go to the ''Media'' tab of that Page Info window.
Select the first image and scroll down though the list with the Down arrow.
If an image in the list is grayed and there is a check-mark in the box ''Block Images from...'' then remove that mark to unblock the images from that domain.
See also [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load

Similar Messages

I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 on the page Am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.

I need to disable pop up blocker on my iMac so that i can run a program but can't figure out how to do it can anyone tell me how?

I need to disable my pop up blocker but i don't know how...can anyone help me with this

Kappy - Thanks for the help. Thought when you checked the box it would "block pop windows." What else should be unchecked? jn

I would like to set a block feature for Firefox Safe Mode. I can't figure out how to do this on McAffee. Help please.

I found out that my boys can get into 'safe mode' which bypasses all blocks. I went to my McAfee home page and can't figure out how to block this browser. Can you tell me how??? THANKS!

Create a contact for yourself either in the phone app or the contacts app. Then go - Settings > General > Siri > My Info > Set your contact.

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!

I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!

If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it).

I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even

I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even uninstalled my lightroom and reinstalled it with same issue. Help!!!

Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.

I just upgraded to mountain lion and I can't figure out how to use messages... it wants me to use AIM or something like it, but I can't change the user...

I just upgraded to mountain lion and I can't figure out how to use messages... it wants me to use AIM or something like it, but I can't change the user... How do I do this??

See this Thread

How can i download something and then open it to use? I can not figure out how to successfully download the new iTunes.

I can not figure out how to download the new version of itunes and open it on my mac. Might be a simple solution i just cant get it to work.
Thanks for your help!
Amber Rose

Did it not show up in yoour Software Update (in System Preferences)?
You can directly download 10.5.2 from Apple from here. And if that doesn't work (it didn't when I just tried it -- something wrong with the apple itunes site I assume) download it through macupdate from here.

When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

njordan wrote:
I can't figure out how to get rid of the "click" sound before I send off the recording!
drag the BottomRight edge of the region to the left, past the unwanted sound

Can't figure out how to edit a Draft e-mail message--simple, right? Wrong.

OK, sorry if this is too basic and belongs in the Getting Started folder, but I couldn't find the problem here or in that location.
I thought I could figure out how to edit a message in the Drafts folder. I tried; it didn't work. I looked online, found a tutorial, which showed that I was indeed trying to do the right thing the right way. So why doesn't it work????
Here's what happens.
I start an e-mail message, click Cancel, then save as a Draft. That works fine. But then...
From the Home screen, I tap Mail.
On the Mailboxes screen, I tap Drafts (there's a number on the right -- 2 -- which disagrees with the number of messages actually seen -- 1 -- at the next step; I don't know if that's an important detail or not).
I see the draft message I want to edit. I tap it.
I tap Edit. According to the tutorial, the message is supposed to open up for me to edit further. But it doesn't. Instead...
The two lines representing the message (Recipient and first few words) move a bit to the right, and the Edit button changes to Cancel.
A dull red Delete button and a blue-gray Move button show up at the bottom. But the first line of the draft message, which has (accurately) shown up under the boldface "(No Recipient)" line, stays where it is -- showing as part of an entry in the list but not as something I can edit. I don't see the complete message, and I can't edit anything, even though I think I have just entered an Edit mode.
I click those two lines, and a red checkmark appears on the left, and the dull buttons at the bottom become brighter red and brighter blue-gray.
Tapping, double-tapping, tap-and-holding... all just toggle that checkmark on and off.
THIS MUST BE REALLY SIMPLE... HOW DO I EDIT THE TEXT OF THE DRAFT MESSAGE????

Zero replies??? Wow, I guess this is a really uncommon problem.
Well, the Genius Bar fixed the problem. They confirmed that it WAS real, and they couldn't figure out how it had gotten that way. There must have been some internal list in an inconsistent state... or something.
The fix was to deactivate my MobileMe account on my iPhone -- just wipe it out. Then they re-activated it. Everything re-synched and the problem was gone.

Can't figure out how to print on the right side of a greeting card using a 5X7 when folded

I have a HP Officejet Pro 8500A. I am trying to print a greeting card, but cannot figure out how to print on the right side of the paper so that it's on the correct side when folded. The paper is 5X7 when folded, 10X7 laid flat.

shgilljx,
Welcome to the forums. I will try to explain this in simple terms, and you'll have to play with it. We'll use plain paper, cut to 10x7. You'll need a marker, 4-5 sheets of paper.
Lay paper flat, number top 1, bottom 2. Flip paper over right to left. number top 3, and bottom 4.Draw a line where the fold would be on each page.1) Put paper with number 3 side up in printer.
To create both templates using MW Office, do this. The requires 2 documents. One is graphic, one is text.
Text template: The text will be printed on number 2. That means your wording must be within the bottom half of the page.
Graphic template: The image must be rotated 180 degrees.The image must be within the top half of the page.
Print the text template. Insert side #3 into the printer. The text should print on side #2.
Print the graphic template: Insert side #1 into the printer. The graphic should print on side #3.
When folded, all should be correct, if I did it right.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

I installed Lion Server and when I click on the Profile Manager I get an error and nothing shows - I can't figure out how to re install Lion Server to fix this - any ideas

I installed Lion Server on my Mac Pro. Everything looked to be working until I checked Profile Manager and I get an error message "Error Reading Settings" Not sure how to fix it. Tried to download Server agian but can't.

Look at /usr/lib/libpq library. I have had the same problem. There were following files:
-rwxr-xr-x 1 root wheel 163680 30 jul 21:17 /usr/lib/libpq.5.4.dylib
lrwxr-xr-x 1 root wheel 15 30 jul 21:20 /usr/lib/libpq.dylib -> libpq.5.4.dylib
Result for command sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB .sh was:
Password:
devicemgr:state = "STOPPED"
postgres:state = "RUNNING"
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
Couldn't drop device_management : #<RuntimeError: Please install the postgresql adapter: `gem install activerecord-postgresql-adapter` (dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backen d/vendor/gems/pg-0.9.0/lib/pg_ext.bundle, 9): Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle
Reason: image not found - /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle)>
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
Please install the postgresql adapter: `gem install activerecord-postgresql-adapter` (dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backen d/vendor/gems/pg-0.9.0/lib/pg_ext.bundle, 9): Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle
Reason: image not found - /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle)
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/activerecord/lib/active_record/connection_adapters/abstract/connection_spe cification.rb:76:in `establish_connection'
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/railties/lib/tasks/databases.rake:69:in `create_database'
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/railties/lib/tasks/databases.rake:31
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 636:in `call'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 636:in `execute'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 631:in `each'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 631:in `execute'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 597:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor. rb:242:in `synchronize'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 590:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 583:in `invoke'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2051:in `invoke_task'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `each'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2068:in `standard_exception_handling'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2023:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2001:in `run'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2068:in `standard_exception_handling'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 1998:in `run'
/usr/bin/rake:31
Couldn't create database for {"adapter"=>"postgresql", "username"=>"_devicemgr", "encoding"=>"UTF8", "pool"=>5, "database"=>"device_management"}
devicemgr:state = "STARTING"
There was missing symlink to right version of libpq dynamic library!
After I entered the following commands and now it works well for me:
$ cd /usr/lib
$ sudo ln -s libpq.5.4.dylib libpq.5.dylib
$ sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB .sh
devicemgr:state = "STOPPED"
postgres:state = "RUNNING"
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
devicemgr:state = "RUNNING"
Milan

First macbookpro, I can not figure out how to click on internet? No icon like on a pc.

I just got my first mac. It is a 15" macbook pro. I am used to a pc, with my internet ico to click on and start up the internet, how or where do I do the same on the mac book?

Go to the top right corner of the menu bar. Click on the magnifier icon, type "safari" in the spotlight dialog box.
Select "Safari" from Top Hit. Safari should launch.
Enter http://www.apple.com/support/mac101/ in the menu bar, hit return.
Take the introductory tour of the Mac interface.

For some reason, I am unable to click on links in the very lower left of the screen. It does not matter if the screen is maximized or smaller. This started a little over a month ago and I can't figure out how to fix it. Any ideas?

Windows 2007. Firefox is currently up-to-date. The problem is the most notable on https://evolve.elsevier.com/cs/Satellite/StudentMyHome?Audience=Student although I have noticed it on other sites. On this site, the position of some of the links on the screen makes it difficult to do my online course work.
This does not happen in Internet Explorer, or in Firefox when used on my school's computers, although I haven't been on them since Spring semester ended a few weeks ago.

Does it help if you make the Find bar (Ctrl+F) or the Add-ons bar (Ctrl+/) (Firefox > Options or View > Toolbars) visible?

By right clicking on something, I accidentally blocked photos at a website--I want them back but can't figure out how to do it

Similar Messages

Maybe you are looking for