By what methood does the iPhone sort photos in the Photo Library?

I would like to have all of our family photos get sorted chronologically in the Photo Library on the iPhone. However, much of our photos are from scans so they have the scanned time in the time stamp as opposed to when they were actually taken. If I manually put the time in iPhoto will that affect how the iPhone Photo Library sorts the photos? The iPhone doesn't appear to sort by name, so a method of renaming photos beginning with the date (YearMonthDay - 19920127) probably would not affect how the iPhone Photo Library sort them. Is there a way to do this?

OK yes Loading apps are faster...But for some reason 4 got latency and lag once in a while compared to the 3GS...its not a zippy...its wierd to explain...but theres a lot of post about it here.
Im guessing the A4 chip is not 1GHz since performance is not that big of a difference compared to the 3GS, Where as the 3GS was big improvement from the 3g and thats only less than 200MHz difference.

Similar Messages

At what point does the iPhone 5 need to charge?

At what voltage does the iPhone 5 need to charge?

When it gets low, typically at about 10% you get a prompt. It is a good idea to let it go completely flat once a month

What firmware does the new 8gb iphone comes in?

i need to buy an iphone and wants to know what firmware does the 8gb comes with? i want to buy it in the apple store near my work. after hearing all the bad news about the 1.1.1 update i may want to older 1.0.2 verison and update it later when a beter debugged 1.1.1 or better comes out.
thanks.

1.1.1 - there are other forum topics on this exact same topic.
If you by a phone that uses 1.0.2 you will NOT be able to activate it until you update to 1.1.1 - you get a prompt right on the activation screen that says update and will not proceed until you do.
You have no choice.

What exactly does the M7 coprocessor do in the iPad air, and what apps can use it?

I've been trying a few 3rd party apps which use the m7 in the iPhone 5s. None of them work. Also there seem to be no apps both built in motion activity under the privacy menu in settings.
My question is, what exactly does the M7 coprocessor in the ipad air?

http://en.wikipedia.org/wiki/Apple_M7
http://www.imore.com/apple-m7
http://www.tuaw.com/2013/10/10/seven-apps-that-take-advantage-of-the-m7-motion-c oprocessor-in-t/

What benefits does the new CMM bring to the table??

After installing the new Colour Management Module, I now have the new option of 'Adobe CMM' as well as the old 'Adobe ACE' and 'Microsoft ICM' in Photoshop CS3 and other Adobe applications.
What benefits does the new CMM bring to the table?? As it is new, I would expect benefits, otherwise resources would not have been wasted in creating it, but what benefits??

anyone got any ideas why my digital (raw) images from the camera - once downloaded to computer present when viewed in explorer photo /fax viewer as the colours which they print with yet if I save the image into Photoshop elements V5 to crop, zoom, and otherwise manipulate they look EXTREMELY washed out in photoshop V5. This of course means that if I want to adjust colour, brightness etc I have to keep saving and going back to explorer photo /fax viewer to see what they REALLY will print like.

What algorithm is used to Sort Photos?

I've read a LOT of posts asking about the sorting order for photos within an album.
No one has yet to provide an accurate answer about the sorting algorithm/method used. Some people say to use iPhoto (I have a PC so I can't) which isn't an answer. Other people refer to editing some metadata. No one seems to be answering the main question:
What data is used to sort photos?
File Name (alphabetical) ?
File creation date?
File modified date?
Size?
Type?
Some (hidden) tag like an mp3 has?
It's gotta be something!
What is it?

Well, I figured it out.
It uses the Created Date to sort files.
On my PC, I use a freeware program called AttributeMagicFree
to change the created date and now sorting works as I expect.
http://www.elwinsoft.com/atm.html

In what QOS does the receiver SOAP adapter work BE or EO?

Hi,
In what QOS does the receiver SOAP adapter work BE or EO?
My guess is that it is by default EO, if so how do i make it work like synchronous?
There is no option to set it explicitly.
Thanks]
Shakthi

Siva,
In receiving adapter you can't set the status. The receiving QOS is set in the pipeline by using the Sender Comm.channel QOS.
So for example in SOAP to SOAP scenario, if you set the Sender comm.channel as BE, then through out the Pipeline till it reaches the Receiver Comm.channel the QOS will be considered as BE only( Even though you didn't explicitly said to the Receiver comm.channel).
Hope it helps!
raj.

What permission does the Service account requires on AD for the Workflow manager 1.0 to be configured in SharePoint Farm?

What permission does the Service account requires on AD for the Workflow manager 1.0 to be configured in SharePoint Farm?
The workflow manager configuration wizard crashes with the below error when used a domain account (setup account with full prvilige on sql and server). It requires some specific permissions on AD ? I couldnt see any documentation stating what permission
it requires.
Can anyone help ?
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: AUTRTV22OQMI5JWSVNDSSNCH0E5DQ2L1
Problem Signature 02: 1.0.20922.0
Problem Signature 03: 505e1b30
Problem Signature 04: System.DirectoryServices.AccountManagement
Problem Signature 05: 4.0.30319.17929
Problem Signature 06: 4ffa5bda
Problem Signature 07: 3ef
Problem Signature 08: 348
Problem Signature 09: KCKGYE1NBUPA2CLDHCXJ0IFBDVSEPD1F
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1044
Additional Information 1: 8e7b
Additional Information 2: 8e7b3fcdf081688bfcdf47496694f0e4
Additional Information 3: c007
Additional Information 4: c007e99b2d5f6f723ff4e7b990b5c691
Log Name:      Application
Source:        Application Error
Date:          27.08.2014 11:47:54
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      OSS01-MAP-226.global.corp
Description:
Faulting application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c
Faulting process id: 0x23a0
Faulting application start time: 0x01cfc1dbe703a8ac
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 36f30eb4-2dcf-11e4-9415-005056892fae
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
    <EventRecordID>7471545</EventRecordID>
    <Channel>Application</Channel>
    <Computer>OSS01-MAP-226.global.corp</Computer>
    <Security />
</System>
<EventData>
    <Data>Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
    <Data>1.0.20922.0</Data>
    <Data>505e1b30</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.2.9200.16864</Data>
    <Data>531d34d8</Data>
    <Data>e0434352</Data>
    <Data>0000000000047b8c</Data>
    <Data>23a0</Data>
    <Data>01cfc1dbe703a8ac</Data>
    <Data>C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
    <Data>C:\Windows\system32\KERNELBASE.dll</Data>
    <Data>36f30eb4-2dcf-11e4-9415-005056892fae</Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>
Log Name:      Application
Source:        .NET Runtime
Date:          27.08.2014 11:47:54
Event ID:      1026
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      OSS01-MAP-226.global.corp
Description:
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
   at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
   at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
   at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
   at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
   at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
   at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
   at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
   at System.Windows.UIElement.Focus()
   at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
   at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
   at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
   at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
   at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
   at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
   at System.Windows.Application.RunInternal(System.Windows.Window)
   at System.Windows.Application.Run()
   at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
    <EventRecordID>7471544</EventRecordID>
    <Channel>Application</Channel>
    <Computer>OSS01-MAP-226.global.corp</Computer>
    <Security />
</System>
<EventData>
    <Data>Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
   at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>,
System.String, System.DateTime)
   at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
   at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
   at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
   at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
   at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
   at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
   at System.Windows.UIElement.Focus()
   at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
   at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
   at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
   at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
   at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
   at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
   at System.Windows.Application.RunInternal(System.Windows.Window)
   at System.Windows.Application.Run()
   at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
</Data>
</EventData>
</Event>

Hi Karthik,
You could refer to the series of videos below to install and configure workflow manager in SharePoint 2013:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx
The Episode 2 describes the necessary account in AD with right permission in the installation process:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx#episode2
Regards,
Rebecca Tu
TechNet Community Support

What exactly does the Radio Beacon Indicate

I have seen cases where the Radio Beacon is black and when it is gray. When it's black you may or may not be able to go through the wireless router to the modem and then to the internet. When it is gray, you cannot really do anything except be in a local mode. However there are instances when the Radio Beacon is black, rather than gray, and you still cannot access the internet. So, what exactly does the activated Radio Beacon Indicate, i.e., that the wireless network is working and the modem is down, or something else entirely ?

Assuming you're referring to the Airport icon in the menu bar, 'clear/empty' means Airport is turned off, gray bars means Airport is on but not connected to a network, and black bars means Airport is on and connected to a network. Other possible icon states are solid gray with a little computer inset, meaning you're connected to a computer-to-computer created on the Mac, and gray bars with an exclamation point (10.6 only), meaning connected to a network but not authenticated (e.g. wrong password for an 801.2X corporate/university network).
To your question, it's perfectly possible to be successfully connected to a network (black icon) and unable to access the internet. Situations like that would include the network requiring a proxy server, for which you haven't set up the details on in Network Preferences, or you're connected to an open network that requires you to enter information or agree to terms (e.g. a hotel network, where you need to put in your room number and agree to the charges before you can connect to the internet).

What exactly does the global switch command line do ?

Hello All
Just foraging in the dark world of APP-V. I have a question which I cannot find answer for through google.
There are powershell commands to publish an APP-V application globally. What exactly does the global switch do ?
I understand it makes the application available to everyone on the machine for anyone who logs onto that machine.
However in the absence of this global switch the application is still available to all users who logon to that particular machine. So what exactly is the reason for using the global switch ?
Thanks

Correct, the global switch makes the application accessable for all users logging on to that system.
This feature is required for some packages, like Office. But it is ofter used for applications used by everyone, like Adobe Reader.
However in the absence of this global switch the application is still available to all users who logon to that particular machine. So what exactly is the reason for using the global switch ?
A package can be added to the system but until it is published a user cannot start it. They won't see any shortcuts in their startmenu/desktop/etc.
So after you added the package to the system, it must be published to a user or globally (every user) to start it.

What "exactly" does the Brightness setting in Print do?

What "exactly" does the Brightness setting in the Print module do?
I know it's a controversial button, especially now that there are proofing options available. Also, since you're using it "blind" it's impossible to know how much or what it's really doing.
Does anyone know if it's e.g.. the same as going to quick develop and going up on "exposure", or "brightness", or "shadows"... How exactly is it brightening the image, and is +100 a full stop or how is it calibrated?
Thanks,
Alan.

Ooops,
Obviously there is NO brightness control in LR...is the print adjustment similar to an exposure adjustment or more like moving the "shadows" and "whites" adjustments (which if I understand corrrectly, moves tones above or below mid tones, but not highlights or blacks)?

What exactly does the Work Offline option do in a shared review hosted on an internal server?

Hi,
What exactly does the Work Offline option do in a shared review hosted on an internal server?
I *think* it simply disconnects you from the review server. I'm not sure why one would want to do this.
I'm trying to recommend an offline workflow for reviewers who may not be able to access a shared review hosted on our internal server (for example, while traveling). These reviewers would like to be able to comment on an offline version of the review PDF and then publish their comments when they can again connect to the Internet/internal server.
It doesn't seem like "Work Offline" is the right fit for this scenario. Instead, should reviewers save a local copy to their hard drive, comment on it, and then, when reconnected to the Internet, open the local copy, click Reconnect to Server, and then click Publish Comments?

Thanks, Dave. So for my hypothetical traveling reviewer, it would be reasonable to suggest the following steps for an offline workflow?
1. Connect to the shared review.
2. Choose Work Offline from the Server Status menu.
3. Close and save the review PDF locally.
4. Comment while traveling.
5. When back in the office, open the local copy of the review PDF.
6. Click Reconnect to Server.
7. Click Publish Comments.

In Mac's PAINTR application, what exactly does the "Splash" function do?

n Mac's PAINTR application, what exactly does the "Splash" function do?

You might also post your question over in the Mac App Store section of the Community, where you might have a better chance of running into someone else using the Paintr App.
Mac App Store: Apple Support Communities
Dennis

What exactly does the colaece option do in TOAD software

Hi,
What exactly does the colaece option do in TOAD software.
Regards,
MuruguPandian P

Coalesce will take ADJACENT free space and coalesce it into one larger free chunk.
A free extent in a dictionary-managed tablespace is made up of a collection of contiguous free blocks. When allocating new extents to a tablespace segment, the database uses the free extent closest in size to the required extent. In some cases, when segments are dropped, their extents are deallocated and marked as free, but adjacent free extents are not immediately recombined into larger free extents. The result is fragmentation that makes allocation of larger extents more difficult.
You should often use the ALTER TABLESPACE ... COALESCE statement to manually coalesce any adjacent free extents. To Coalesce a tablespace give the following command
SQL> alter tablespace ica coalesce;
Source: http://www.oracle-dba-online.com/tablespaces_and_datafiles.htm
Regards
Asif Kabir

What features does the Dreamweaver extension Business Catalyst have?

What features does the Dreamweaver extension Business Catalyst have?
I am looking to create an e-commerce website and wonder if the business catalyst extension is useful.

Thank you so much for all your help
Just a few last things:
I have good web-designing abilities and with dreamweaver, but are there any books or extra help on how to create proffesional websites using Dreamweaver CS5.5 - as this is for my business (retail-jewellery) and I want it to be really interactive and user friendly.
Also what are the best adobe suites to create a professional e-commerce website?
Does the After Effects CS5.5 the only adobe software that lets you have moving graphics and text?

By what methood does the iPhone sort photos in the Photo Library?

Similar Messages

Maybe you are looking for