Bypassing Execution Policy for a specific host

Is is possible to have the execution policy set to remotesigned but have specific hosts set to bypass? I am administering an SCCM 2012 environment and I want to be able to run Powershell to check for the existence of packages or applications but it keeps
erroring out that the script is not signed. I tried adding the server to wsman:\localhost\client\truestedhosts but that did not seem to work either. Is this possible?
Thanks!
Tony

Hi Tony,
I’m writing to just check in to see if the suggestions were helpful.
If you need further help, please feel free to reply this post directly so we will be notified to follow it up.
If you have any feedback on our support, please click here.
Best Regards
Anna
TechNet Community Support

Similar Messages

SCCM 2012: enable powershell execution policy for SCCM 2012 console

Hi,
I always get stuck settings up the remote sccm 2012 powershell (cd psdrive sitecode:). Maybe not a real sccm 2012 question but Powershell but wonder what steps you take to make it work (it works on our production environment, setting up in a lab always gives
me headaches, will defintely write the solution down this time :-)).
Please advise what the steps are in configuring remote powershell for SCCM 2012.
1.my personal account "Myuser" has admin-rights in sccm 2012
2.I can open Powershell logged on to the sccm 2012 server then opening sccm 2012 console, connect via powershell
3.however, when I connect remote to the sccm server, I get the error:
. : File C:\Users\Myuser\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 cannot be loaded. The file C:\Use
rs\MyUser\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1 is not digitally signed. You cannot run this scr
ipt on the current system. For more information about running scripts and setting execution policy, see about_Execution
_Policies at http://go.microsoft.com/fwlink/?LinkID=135170.
4.So I connect to the sccm-server and ask for the execution policy to unrestricted, I get this:
set-executionpolicy unrestricted
[Y] Yes [N] No [S] Suspend [?] Help (default is "Y"): y
Set-ExecutionPolicy : Windows PowerShell updated your execution policy successf
ully, but the setting is overridden by a policy defined at a more specific scope
There is no policy which sets any powershell configs.
Please advise.
J.
Jan Hoedt

Those client settings are only for the actions performed by the ConfigMgr client. Normal PowerShell actions are restricted to the configured execution policy on the machine.
Have a look at this post:
http://blogs.msdn.com/b/pasen/archive/2011/12/07/set-executionpolicy-windows-powershell-updated-your-execution-policy-successfully-but-the-setting-is-overridden-by-a-policy-defined-at-a-more-specific-scope.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Deny user based policy for a specific computer

I have a user based policy that deploys software for specific users when they log in to their Windows 7 workstations.
Some of these same users also have login access to a test server. I am trying to prevent the software deployment policies from being processed when users login to this test server. I have denied the 'read' and the 'Apply group Policy' security settings
to the test computer, but since it is a user based policy I believe these computer level denies are being ignored.
I have looked into loopback processing but I cannot grasp how it would fit in to my environment. Do I enable the loopback processing in the same policy that deploys the software?
Any suggestions?

Use loopback merge in the policy of the software that I want to keep? Or in the Policy I want to deny?
I finally got it to work.
I moved the computer object to a new OU and blocked inheritance.<o:p></o:p>
I created a new policy that only has Loopback Policy enabled (replace).
I linked that new policy to the OU that has the test server.<o:p></o:p>
I removed any loopback processing settings from any other policies. I left them at 'Not Configured'.<o:p></o:p>
For the software I was trying to block I modified its security permission to read DENY for the computer object (Computer Name) of the test computer
. ('Apply group policy' was left blank).<o:p></o:p>
I then linked all other software deploy policies to this new OU and modified the security filtering from authenticated users to whichever users specifically
needed the software.<o:p></o:p>
Ran Gpresult /R /scope computer and verified that the only computer policy the server was receiving was my loopback policy<o:p></o:p>
Reboot test server.
<o:p>Thanks everybody for your help!</o:p>

Fault handling policy for a process in the fault-binding.xml

Can I specify a fault handling policy for a specific process using fault handling framework 10.1.3.3?
<process faultPolicy="DefaultPolicy"/>
I cannot specify the name of the process according to the xsd :(
Can this be achieved?
I have a two different partner links in different processes having the same name. If I add the partner link to the fault-binding.xml what would be the result?
Note: I cannot use bpel.xml to specify the fault policies as of now.

The fault policy bindings file does not allow you to specify a specific fault policy for an individual processes. You can only do this for all BPEL processes (eg: process Level) or at finer grained levels such as partner link levels.
You might be able to use the partner link level for any services that call the process in which you wnat to error handle (eg: Process C needs to be error handled. Process A and B call C so for the partner link names for invoking C could have the fault policy defined for them). Therefore any faults returned from C could propagate back to process A / B and be handled within by the policy outside of Process C. Obviously if this apporach was used you would not want to use process level definitions as C would continue to use this.
If the partner links were of the same name, they should both be handled by the fault policy that is defined withiin the Fault policy (e.g Partner Link level definitions)
An approach that can be used is to specify the fault policy within the bpel.xml file. The information would be added as follows:
</partnerLinkBindings>

<faultPolicyBindings>
<process faultPolicy="AProcessFaultPolicy"/>
<partnerLink faultPolicy="APartnerLinnkPolicy">
<name>insertSSN_dbAdapter</name>
<name>Another_Adapter</name>
</partnerLink>
</faultPolicyBindings>

</BPELProcess>
</BPELSuitcase>
However, I noted you said you were unable to do this. I wasn't sure if this was for technical/governamce reasons or knowledge reasons (unsure where to place to the details.
Hope that helps and does not confuse matters
Dave

Disable esmtp Inspection for Specific Host

Hello. Is it possible to disable esmtp inspection for a specific INSIDE host with use of a policy-map? If so, could you provide an example configuration.

Yes it is possible. You could do something like the following:
access-list ESMTP deny ip host 1.1.1.10 any
access-list ESMTP permit ip 1.1.1.0 255.255.255.0 any
class-map CMAP
match access-list ESMTP
policy-map PMAP
class CMAP
inspect esmtp
service-policy PMAP interface inside
Please remember to select a correct answer and rate helpful posts

Strange info in "Bypass Proxy Settings for These Hosts and Domains"

For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
Thanks

When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network and choosing to set up again.
Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
In this case, proxies are not an issue, and are simply a distraction from the real problems.

Disable Portable Home Directories on specific hosts for all users?

Hello All,
Would it be possible to block any and all Portable Home Directory services for specific hosts? Something like "MobileAccountNeverAsk-<user>" but for the whole workstation? We have a network with both portable and stationary machines. I'd like our users to be able to use all machines, going portable on the MacBook and not bothering with syncing when logged into iMacs or Mac Pros.
The Open Directory servers are running Snow Leopard (for now) and all clients are running Lion.
Thanks
Paul

Darren,
Yes. The clients are Solaris 10 as well. And the domain is the same on both server and clients.
The files should be owned by real users.
If a user ssh's into the server directly, the permissions display properly. But on the clients it is nobody. Other than the permission displaying wrong, I haven't noticed any permission-related restrictions on the clients.
-Jim
Edited by: cr8rface on Sep 22, 2008 10:30 AM

Very specific group policy for IE 11

Got a very interesting GPO I need created. I need a GPO that forces all users on a certain machine to use InPrivate browsing at all times while they are using IE. Or even for a specific website.
I have an application that has a bug that is fixed by using private browsing, weirdly enough. To limit problems with users saying "But I did use private browsing" I would ideally like to force the use of it while they are on the machine. If I have
to apply it to a specific group, that will be fine too, but the end result needs to be private browsing they cannot turn off at all.
Any suggestions? Open to Powershell solutions, or creative options.

Hi Noah ,
The only group policy I have found related to the InPrivateBrowsing is this :
User Configuration, Administrative Templates, Windows Components, Internet Explorer, Privacy and Turn off InPrivate Browsing
But it is used to turn on /off the Inprivate Browsing feature and it can not be used to force the Inprivate Browsing .
I am afraid the only good option is to create a shortcut for the user if you want the user to open the Internet Explorer in private browsing mode every time .
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Email is quarantined for a specific user with a bypass filtering rule in place.

Hello,
I was instructed to post here for my issue by the technicians from the Office365 forum. Here is the thread from that forum. I would prefer to not have to post everything again.
http://community.office365.com/en-us/f/158/p/253629/779602.aspx#779602
Original post text:
I was recently migrated from FOPE to EOP. For the last few weeks one of my users out of 4 is not receiving a daily email from a newsletter. The other three users receive it just fine. Her's is in the quarantine and I have to release
it every morning. I have a bypass rule in for the IP address of the mail server but no change for her. I setup an individual rule for her and this domain but it is still being quarantined. I checked the report of the rule and it is being
used.

Well now the issue has been made worse. My email user did not receive the message in quarantine this morning either. The other 3 people who regularly receive the email received the email this morning.
Also I figured since I got a very fast response in the Office365 forum that I would receive the same treatment here. Is there a number that I need to call to get this issue resolved?

Set execution policy via CM 2012 SP1

Good afternoon everyone.
Sorry about the last question. I'd attempted to resolve this in so many ways that the last question was based on an old attempt.
I'm trying to set the PowerShell Execution Policy through a batch file. Specifically, the batch file contains one single command:
PowerShell -NoProfile -ExecutionPolicy Bypass -Command "& {Start-Process PowerShell -ArgumentList 'Set-ExecutionPolicy RemoteSigned -Force' -Verb RunAs}"
If I run this command standalone, either as local Admin or not, the batch file completes and the execpol is changed appropriately.
When deploying the batch file through CM, Software Center shows a successful installation but the ExecPol value does not change. The batch file within CM is configured to run as administrator.
Any suggestions as to what I may be doing wrong would be greatly appreciated.
Thanks very much.
IAmStrings

Hi Narco.
Yep, tried that as well. Tried Registry /s with a reg file and tried calling another PoSH script under a temp ExecPol of bypass that ran:
set-itemproperty-path"registry::HKLM\SOFTWARE\Microsoft\PowerShell\1\ShellIds\Microsoft.PowerShell"-nameExecutionPolicy-value"UnRestricted"
If they're deployed, they don't change the value.
It's almost as if the deployment isn't really running as admin. I've looked at the execmgr.log but I never see any entries with "Failed" or anything like that. There are some entries stating that it's "WaitingServiceWindow" but then I later see
the state changing from "WaitingServiceWindow to Ready"
Thanks for replying.
IAmStrings

Search for records in the event viewer after the last run (not the entire event log), remove duplicate - Output Logon type for a specific OU users

Hi,
The following code works perfectly for me and give me a list of users for a specific OU and their respective logon types :-
$logFile = 'c:\test\test.txt'
$_myOU = "OU=ABC,dc=contosso,DC=com"
# LogonType as per technet
$_logontype = @{
2 = "Interactive"
3 = "Network"
4 = "Batch"
5 = "Service"
7 = "Unlock"
8 = "NetworkCleartext"
9 = "NewCredentials"
10 = "RemoteInteractive"
11 = "CachedInteractive"
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0""
or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>" -ComputerName
"XYZ" | ForEach-Object {
#TargetUserSid
$_cur_OU = ([ADSI]"LDAP://<SID=$(($_.Properties[4]).Value.Value)>").distinguishedName
If ( $_cur_OU -like "*$_myOU" ) {
$_cur_OU
#LogonType
$_logontype[ [int] $_.Properties[8].Value ]
#Time-created
$_.TimeCreated
$_.Properties[18].Value
} >> $logFile
I am able to pipe the results to a file however, I would like to convert it to CSV/HTML When i try "convertto-HTML"
function it converts certain values . Also,
a) I would like to remove duplicate entries when the script runs only for that execution.
b) When the script is run, we may be able to search for records after the last run and not search in the same
records that we have looked into before.
PLEASE HELP !

If you just want to look for the new events since the last run, I suggest to record the EventRecordID of the last event you parsed and use it as a reference in your filter. For example:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[(EventID=4624 and
EventRecordID>46452302)]]</Select>
<Suppress Path="Security">*[EventData[Data[@Name="SubjectLogonId"]="0x0" or Data[@Name="TargetDomainName"]="NT AUTHORITY" or Data[@Name="TargetDomainName"]="Window Manager"]]</Suppress>
</Query>
</QueryList>
That's this logic that the Server Manager of Windows Serve 2012 is using to save time, CPU and bandwidth. The problem is how to get that number and provide it to your next run. You can store in a file and read it at the beginning. If not found, you
can go through the all event list.
Let's say you store it in a simple text file, ref.txt
1234
At the beginning just read it.
Try {
$_intMyRef = [int] (Get-Content .\ref.txt)
Catch {
Write-Host "The reference EventRecordID cannot be found." -ForegroundColor Red
$_intMyRef = 0
This is very lazy check. You can do a proper parsing etc... That's a quick dirty way. If I can read
it and parse it as an integer, I use it. Else, I just set it to 0 meaning I'll collect all info.
Then include it in your filter. You Get-WinEvent becomes:
Get-WinEvent -FilterXml "<QueryList><Query Id=""0"" Path=""Security""><Select Path=""Security"">*[System[(EventID=4624 and EventRecordID>$_intMyRef)]]</Select><Suppress Path=""Security"">*[EventData[Data[@Name=""SubjectLogonId""]=""0x0"" or Data[@Name=""TargetDomainName""]=""NT AUTHORITY"" or Data[@Name=""TargetDomainName""]=""Window Manager""]]</Suppress></Query></QueryList>"
At the end of your script, store the last value you got into your ref.txt file. So you can for example get that info in the loop. Like:
$Result += $LogonRecord
$_intLastId = $Event.RecordId
And at the end:
Write-Output $_intLastId | Out-File .\ref.txt
Then next time you run it, it is just scanning the delta. Note that I prefer this versus the date filter in case of the machine wasn't active for long or in case of time sync issue which can sometimes mess up with the date based filters.
If you want to go for a date filtering, do it at the Get-WinEvent level, not in the Where-Object. If the query is local, it doesn't change much. But in remote system, it does the filter on the remote side therefore you're saving time and resources on your
side. So for example for the last 30 days, and if you want to use the XMLFilter parameter, you can use:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">*[System[TimeCreated[timediff(@SystemTime) <= 2592000000]]]</Select>
</Query>
</QueryList>
Then you can combine it, etc...
PS, I used the confusing underscores because I like it ;)
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Microsoft DaRT Recovery Image Wizard - powershell execution policy

When I launch DaRT Recovery Image Wizard I get this message -
"Windows Powershell updated your execution policy successfully, but the setting is overridden by a policy defined at a more specific scope. Due to the override your shell will retain its current effective execution policy of AllSigned."
I want my powershell settings set this way.
But it wont let me continue to run the mDart wizard.
Why does it need to modify my powershell settings to less secure scope?
Is there a workaround for this? This seems like a bug.
Thanks for any help

Which version of DaRT and what operating system?
Brandon
MDOP on the Springboard Series on TechNet

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

DAC Execution plan for financial analytics keeps running (OBIA 7.9.4)

Hi Gurus,
I have problem when tried to run full load on financial analytics execution plan. I used OBIA 7.9.4, Informatica 8.6.1 and DAC 10.1.3.4.1.patch.20100901.0520. This runs on Windows Server 2008 Service Pack 2 with 6 GB of memory. I set $$INITIAL_EXTRACT_DATE='01/01/2011' so it should pull data greater than $$INITIAL_EXTRACT_DATE, which I believed not more than 3 years data and should be not more than 2 days for loading this data. But execution plan keeps running and not yet completed even after more than 2 days. I have already checked for DAC execution plan log, But nothing I can found from the log.
Here is the log file:
12 INFO Thu Jun 27 13:52:12 SGT 2013 DAC Version: Dac Build AN 10.1.3.4.1.patch.20100901.0520
13 INFO Thu Jun 27 13:52:12 SGT 2013 The System properties are: java.runtime.name Java(TM) SE Runtime Environment
sun.boot.library.path C:\orahome\10gR3_1\jdk\jre\bin
java.vm.version 10.0-b23
java.vm.vendor Sun Microsystems Inc.
java.vendor.url http://java.sun.com/
path.separator ;
ETL_EXECUTION_MODE ETL_SERVER
java.vm.name Java HotSpot(TM) Server VM
file.encoding.pkg sun.io
sun.java.launcher SUN_STANDARD
user.country US
sun.os.patch.level Service Pack 2
java.vm.specification.name Java Virtual Machine Specification
user.dir C:\orahome\10gR3_1\bifoundation\dac
java.runtime.version 1.6.0_07-b06
java.awt.graphicsenv sun.awt.Win32GraphicsEnvironment
java.endorsed.dirs C:\orahome\10gR3_1\jdk\jre\lib\endorsed
os.arch x86
java.io.tmpdir C:\Users\ADMINI~1\AppData\Local\Temp\2\
line.separator
java.vm.specification.vendor Sun Microsystems Inc.
user.variant
os.name Windows Server 2008
REPOSITORY_STAMP 4E8A758D24E553DBB74B325E89718660
sun.jnu.encoding Cp1252
java.library.path C:\orahome\10gR3_1\jdk\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Informatica\PowerCenter8.6.1\server\bin;C:\OracleBI\server\Bin;C:\OracleBI\web\bin;C:\OracleBI\web\catalogmanager;C:\OracleBI\SQLAnywhere;C:\Program Files (x86)\Java\jdk1.5.0_22\bin;C:\app\oracle\product\11.2.0\dbhome_1\bin;C:\Program Files\HP\NCU;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\OmniBack\bin\;C:\Windows\System32\WindowsPowerShell\v1.0\
java.specification.name Java Platform API Specification
java.class.version 50.0
sun.management.compiler HotSpot Tiered Compilers
os.version 6.0
user.home C:\Users\Administrator
user.timezone Asia/Singapore
java.awt.printerjob sun.awt.windows.WPrinterJob
file.encoding Cp1252
java.specification.version 1.6
java.class.path .\lib\msbase.jar;.\lib\mssqlserver.jar;.\lib\msutil.jar;.\lib\sqljdbc.jar;.\lib\ojdbc6.jar;.\lib\ojdbc5.jar;.\lib\ojdbc14.jar;.\lib\db2java.zip;.\lib\terajdbc4.jar;.\lib\log4j.jar;.\lib\teradata.jar;.\lib\tdgssjava.jar;.\lib\tdgssconfig.jar;.\DAWSystem.jar;.;
user.name Administrator
java.vm.specification.version 1.0
java.home C:\orahome\10gR3_1\jdk\jre
sun.arch.data.model 32
user.language en
java.specification.vendor Sun Microsystems Inc.
awt.toolkit sun.awt.windows.WToolkit
java.vm.info mixed mode
java.version 1.6.0_07
java.ext.dirs C:\orahome\10gR3_1\jdk\jre\lib\ext;C:\Windows\Sun\Java\lib\ext
sun.boot.class.path C:\orahome\10gR3_1\jdk\jre\lib\resources.jar;C:\orahome\10gR3_1\jdk\jre\lib\rt.jar;C:\orahome\10gR3_1\jdk\jre\lib\sunrsasign.jar;C:\orahome\10gR3_1\jdk\jre\lib\jsse.jar;C:\orahome\10gR3_1\jdk\jre\lib\jce.jar;C:\orahome\10gR3_1\jdk\jre\lib\charsets.jar;C:\orahome\10gR3_1\jdk\jre\classes
java.vendor Sun Microsystems Inc.
file.separator \
java.vendor.url.bug http://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding UnicodeLittle
sun.cpu.endian little
sun.desktop windows
sun.cpu.isalist pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
14 SEVERE Thu Jun 27 13:52:12 SGT 2013
START OF ETL
15 SEVERE Thu Jun 27 13:52:36 SGT 2013 Unable to evaluate method getNamedSourceIdentifier for class com.siebel.analytics.etl.etltask.InformaticaTask
16 SEVERE Thu Jun 27 13:52:36 SGT 2013 Unable to evaluate method getNamedSource for class com.siebel.analytics.etl.etltask.InformaticaTask
17 SEVERE Thu Jun 27 13:52:36 SGT 2013 Unable to evaluate method getNamedSourceIdentifier for class com.siebel.analytics.etl.etltask.PauseTask
18 SEVERE Thu Jun 27 13:52:36 SGT 2013 Unable to evaluate method getNamedSource for class com.siebel.analytics.etl.etltask.PauseTask
19 SEVERE Thu Jun 27 13:52:40 SGT 2013 Unable to evaluate method getNamedSourceIdentifier for class com.siebel.analytics.etl.etltask.TaskPrecedingActionScriptTask
20 SEVERE Thu Jun 27 13:52:40 SGT 2013 Unable to evaluate method getNamedSource for class com.siebel.analytics.etl.etltask.TaskPrecedingActionScriptTask
21 SEVERE Thu Jun 27 13:52:46 SGT 2013 Starting ETL Process.
22 SEVERE Thu Jun 27 13:52:47 SGT 2013 Informatica Status Poll Interval new value : 20000(milli-seconds)
24 SEVERE Thu Jun 27 13:52:52 SGT 2013 C:\orahome\10gR3_1\bifoundation\dac\Informatica\parameters\input\FLAT FILE specified is not a currently existing directory
25 SEVERE Thu Jun 27 13:52:52 SGT 2013 Request to start workflow : 'SILOS:SIL_InsertRowInRunTable' has completed with error code 0
26 SEVERE Thu Jun 27 13:53:12 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SILOS.SIL_InsertRowInRunTable.txt SIL_InsertRowInRunTable
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
27 SEVERE Thu Jun 27 13:53:13 SGT 2013 Number of running sessions : 13
28 SEVERE Thu Jun 27 13:53:13 SGT 2013 Number of running sessions : 12
29 SEVERE Thu Jun 27 13:53:14 SGT 2013 Number of running sessions : 11
30 SEVERE Thu Jun 27 13:53:15 SGT 2013 Number of running sessions : 10
32 SEVERE Thu Jun 27 13:53:18 SGT 2013 C:\orahome\10gR3_1\bifoundation\dac\Informatica\parameters\input\ORACLE specified is not a currently existing directory
33 SEVERE Thu Jun 27 13:53:18 SGT 2013 C:\orahome\10gR3_1\bifoundation\dac\Informatica\parameters\input\Oracle specified is not a currently existing directory
34 SEVERE Thu Jun 27 13:53:18 SGT 2013 C:\orahome\10gR3_1\bifoundation\dac\Informatica\parameters\input\oracle specified is not a currently existing directory
35 SEVERE Thu Jun 27 13:53:18 SGT 2013 C:\orahome\10gR3_1\bifoundation\dac\Informatica\parameters\input\ORACLE (THIN) specified is not a currently existing directory
36 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SILOS:SIL_CurrencyTypes' has completed with error code 0
37 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_ValueSetHier_Extract_Full' has completed with error code 0
38 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_GLAccount_SegmentConfig_Extract' has completed with error code 0
39 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_LocalCurrency_Temporary' has completed with error code 0
40 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SILOS:SIL_Parameters_Update' has completed with error code 0
41 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_GLAccountDimension_FinSubCodes' has completed with error code 0
42 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_ValueSet_Extract' has completed with error code 0
43 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GLSegmentDimension_Full' has completed with error code 0
44 SEVERE Thu Jun 27 13:53:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity' has completed with error code 0
45 SEVERE Thu Jun 27 13:53:39 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SILOS.SIL_CurrencyTypes.txt SIL_CurrencyTypes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
46 SEVERE Thu Jun 27 13:53:39 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_ValueSetHier_Extract_Full.txt SDE_ORA_Stage_ValueSetHier_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
47 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_GLAccount_SegmentConfig_Extract.txt SDE_ORA_Stage_GLAccount_SegmentConfig_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
48 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_LocalCurrency_Temporary.txt SDE_ORA_LocalCurrency_Temporary
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
49 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_Parameters_Update.txt SIL_Parameters_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
50 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_GLAccountDimension_FinSubCodes.txt SDE_ORA_Stage_GLAccountDimension_FinSubCodes
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
51 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_ValueSet_Extract.txt SDE_ORA_Stage_ValueSet_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
52 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GLSegmentDimension_Full.txt SDE_ORA_GLSegmentDimension_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
53 SEVERE Thu Jun 27 13:53:40 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity.txt SDE_ORA_InternalOrganizationDimension_BalanceSegmentValue_LegalEntity
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
54 SEVERE Thu Jun 27 13:53:40 SGT 2013 Number of running sessions : 10
55 SEVERE Thu Jun 27 13:53:40 SGT 2013 Number of running sessions : 10
56 SEVERE Thu Jun 27 13:53:40 SGT 2013 Number of running sessions : 11
57 SEVERE Thu Jun 27 13:53:40 SGT 2013 Number of running sessions : 11
58 SEVERE Thu Jun 27 13:53:40 SGT 2013 Number of running sessions : 11
59 SEVERE Thu Jun 27 13:53:41 SGT 2013 Number of running sessions : 11
60 SEVERE Thu Jun 27 13:53:41 SGT 2013 Number of running sessions : 11
61 SEVERE Thu Jun 27 13:53:41 SGT 2013 Number of running sessions : 11
62 SEVERE Thu Jun 27 13:53:41 SGT 2013 Number of running sessions : 11
63 SEVERE Thu Jun 27 13:53:42 SGT 2013 Number of running sessions : 10
64 SEVERE Thu Jun 27 13:53:42 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GLBalanceFact_Full' has completed with error code 0
65 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SILOS:SIL_Stage_GroupAccountNumberDimension_FinStatementItem' has completed with error code 0
66 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SILOS:SIL_GlobalCurrencyGeneral_Update' has completed with error code 0
67 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_GroupAccountNumberDimension' has completed with error code 0
68 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_ARSubType_Extract' has completed with error code 0
69 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_GLRevenueTypeExtract' has completed with error code 0
70 SEVERE Thu Jun 27 13:53:46 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_ValueSetHier_Flatten' has completed with error code 0
71 SEVERE Thu Jun 27 13:53:47 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_ExchangeRateGeneral_Full' has completed with error code 0
72 SEVERE Thu Jun 27 13:53:47 SGT 2013 Request to start workflow : 'SILOS:SIL_ListOfValuesGeneral_Unspecified' has completed with error code 0
73 SEVERE Thu Jun 27 13:54:06 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SILOS.SIL_Stage_GroupAccountNumberDimension_FinStatementItem.txt SIL_Stage_GroupAccountNumberDimension_FinStatementItem
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
74 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SILOS.SIL_GlobalCurrencyGeneral_Update.txt SIL_GlobalCurrencyGeneral_Update
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
75 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_GroupAccountNumberDimension.txt SDE_ORA_Stage_GroupAccountNumberDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
76 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_GLRevenueTypeExtract.txt SDE_ORA_Stage_TransactionTypeDimension_GLRevenueTypeExtract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
77 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_ARSubType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_ARSubType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
78 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_ValueSetHier_Flatten.txt SDE_ORA_Stage_ValueSetHier_Flatten
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
79 SEVERE Thu Jun 27 13:54:07 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_ExchangeRateGeneral_Full.txt SDE_ORA_ExchangeRateGeneral_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
80 SEVERE Thu Jun 27 13:54:07 SGT 2013 Number of running sessions : 11
81 SEVERE Thu Jun 27 13:54:07 SGT 2013 Number of running sessions : 10
82 SEVERE Thu Jun 27 13:54:07 SGT 2013 Number of running sessions : 10
83 SEVERE Thu Jun 27 13:54:07 SGT 2013 Number of running sessions : 10
84 SEVERE Thu Jun 27 13:54:08 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SILOS.SIL_ListOfValuesGeneral_Unspecified.txt SIL_ListOfValuesGeneral_Unspecified
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
85 SEVERE Thu Jun 27 13:54:08 SGT 2013 Number of running sessions : 10
86 SEVERE Thu Jun 27 13:54:08 SGT 2013 Number of running sessions : 10
87 SEVERE Thu Jun 27 13:54:08 SGT 2013 Number of running sessions : 10
88 SEVERE Thu Jun 27 13:54:09 SGT 2013 Number of running sessions : 10
89 SEVERE Thu Jun 27 13:54:12 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GLJournals_Full' has completed with error code 0
90 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_APTransactionFact_Payment_Full' has completed with error code 0
91 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_APType_Extract' has completed with error code 0
92 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_APTransactionFact_PaymentSchedule_Full' has completed with error code 0
93 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_APTransactionFact_Distributions_Full' has completed with error code 0
94 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_GLRevenueSubType_Extract' has completed with error code 0
95 SEVERE Thu Jun 27 13:54:13 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_APSubType_Extract' has completed with error code 0
96 SEVERE Thu Jun 27 13:54:14 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_GLCOGSSubType_Extract' has completed with error code 0
97 SEVERE Thu Jun 27 13:54:15 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_ValueSetHier_DeriveRange' has completed with error code 0
98 SEVERE Thu Jun 27 13:54:33 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_APTransactionFact_Payment_Full.txt SDE_ORA_APTransactionFact_Payment_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
99 SEVERE Thu Jun 27 13:54:33 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_APType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_APType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
100 SEVERE Thu Jun 27 13:54:33 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_APTransactionFact_PaymentSchedule_Full.txt SDE_ORA_APTransactionFact_PaymentSchedule_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
101 SEVERE Thu Jun 27 13:54:33 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_APTransactionFact_Distributions_Full.txt SDE_ORA_APTransactionFact_Distributions_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
102 SEVERE Thu Jun 27 13:54:34 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_GLRevenueSubType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_GLRevenueSubType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
103 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 12
104 SEVERE Thu Jun 27 13:54:34 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_APSubType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_APSubType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
105 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 11
106 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 10
107 SEVERE Thu Jun 27 13:54:34 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_GLCOGSSubType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_GLCOGSSubType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
108 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 11
109 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 10
110 SEVERE Thu Jun 27 13:54:34 SGT 2013 Number of running sessions : 10
111 SEVERE Thu Jun 27 13:54:35 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_ValueSetHier_DeriveRange.txt SDE_ORA_Stage_ValueSetHier_DeriveRange
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
112 SEVERE Thu Jun 27 13:54:36 SGT 2013 Number of running sessions : 10
113 SEVERE Thu Jun 27 13:54:36 SGT 2013 Number of running sessions : 9
114 SEVERE Thu Jun 27 13:54:36 SGT 2013 Number of running sessions : 8
115 SEVERE Thu Jun 27 13:54:40 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_GLCOGSType_Extract' has completed with error code 0
116 SEVERE Thu Jun 27 13:54:40 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionTypeDimension_ExpenditureCategory' has completed with error code 0
117 SEVERE Thu Jun 27 13:54:40 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion' has completed with error code 0
118 SEVERE Thu Jun 27 13:54:40 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_ARType_Extract' has completed with error code 0
119 SEVERE Thu Jun 27 13:54:40 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GL_AP_LinkageInformation_Extract_Full' has completed with error code 0
120 SEVERE Thu Jun 27 13:54:41 SGT 2013 Request to start workflow : 'SILOS:SIL_TimeOfDayDimension' has completed with error code 0
121 SEVERE Thu Jun 27 13:55:00 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_GLCOGSType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_GLCOGSType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
122 SEVERE Thu Jun 27 13:55:00 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_TransactionTypeDimension_ExpenditureCategory.txt SDE_ORA_TransactionTypeDimension_ExpenditureCategory
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
123 SEVERE Thu Jun 27 13:55:00 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_ARType_Extract.txt SDE_ORA_Stage_TransactionTypeDimension_ARType_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
124 SEVERE Thu Jun 27 13:55:00 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion.txt SDE_ORA_InternalOrganizationDimensionHierarchy_HROrgsTemporary_LatestVersion
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
125 SEVERE Thu Jun 27 13:55:00 SGT 2013 Number of running sessions : 7
126 SEVERE Thu Jun 27 13:55:00 SGT 2013 Number of running sessions : 6
127 SEVERE Thu Jun 27 13:55:01 SGT 2013 Number of running sessions : 6
128 SEVERE Thu Jun 27 13:55:01 SGT 2013 Number of running sessions : 10
129 SEVERE Thu Jun 27 13:55:01 SGT 2013 Number of running sessions : 9
130 SEVERE Thu Jun 27 13:55:01 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SILOS.SIL_TimeOfDayDimension.txt SIL_TimeOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
131 SEVERE Thu Jun 27 13:55:02 SGT 2013 Number of running sessions : 9
132 SEVERE Thu Jun 27 13:55:06 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionTypeDimension_GLRevenueDerive' has completed with error code 0
133 SEVERE Thu Jun 27 13:55:06 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionTypeDimension_APDerive' has completed with error code 0
134 SEVERE Thu Jun 27 13:55:06 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionTypeDimension_GLOther' has completed with error code 0
135 SEVERE Thu Jun 27 13:55:06 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_Stage_TransactionTypeDimension_ARSubType_ExtractApplication' has completed with error code 0
136 SEVERE Thu Jun 27 13:55:06 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionTypeDimension_GLCOGSDerive' has completed with error code 0
137 SEVERE Thu Jun 27 13:55:08 SGT 2013 Request to start workflow : 'SILOS:SIL_HourOfDayDimension' has completed with error code 0
138 SEVERE Thu Jun 27 13:55:21 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GL_AP_LinkageInformation_Extract_Full.txt SDE_ORA_GL_AP_LinkageInformation_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
139 SEVERE Thu Jun 27 13:55:21 SGT 2013 Number of running sessions : 9
140 SEVERE Thu Jun 27 13:55:27 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GL_PO_LinkageInformation_Extract_Full' has completed with error code 0
141 SEVERE Thu Jun 27 13:55:27 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_Stage_TransactionTypeDimension_ARSubType_ExtractApplication.txt SDE_ORA_Stage_TransactionTypeDimension_ARSubType_ExtractApplication
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
142 SEVERE Thu Jun 27 13:55:27 SGT 2013 Number of running sessions : 8
143 SEVERE Thu Jun 27 13:55:28 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SILOS -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\DataWarehouse.DataWarehouse.SILOS.SIL_HourOfDayDimension.txt SIL_HourOfDayDimension
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
144 SEVERE Thu Jun 27 13:55:29 SGT 2013 Number of running sessions : 7
145 SEVERE Thu Jun 27 13:55:47 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GL_PO_LinkageInformation_Extract_Full.txt SDE_ORA_GL_PO_LinkageInformation_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
146 SEVERE Thu Jun 27 13:55:47 SGT 2013 Number of running sessions : 7
147 SEVERE Thu Jun 27 13:55:53 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full' has completed with error code 0
148 SEVERE Thu Jun 27 13:55:53 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GLJournals_Full.txt SDE_ORA_GLJournals_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
149 SEVERE Thu Jun 27 13:56:00 SGT 2013
ANOMALY INFO::: DataWarehouse:SELECT COUNT(*) FROM W_ORA_GLRF_DERV_F_TMP
ORA-00942: table or view does not exist
MESSAGE:::ORA-00942: table or view does not exist
EXCEPTION CLASS::: java.sql.SQLSyntaxErrorException
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:194)
oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:853)
oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1145)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1267)
oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1469)
oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:389)
com.siebel.etl.database.cancellable.CancellableStatement.executeQuery(CancellableStatement.java:69)
com.siebel.etl.database.DBUtils.executeQuery(DBUtils.java:150)
com.siebel.etl.database.WeakDBUtils.executeQuery(WeakDBUtils.java:242)
com.siebel.analytics.etl.etltask.CountTableTask.doExecute(CountTableTask.java:99)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.etl.engine.core.Session.getTargetTableRowCounts(Session.java:3375)
com.siebel.etl.engine.core.Session.run(Session.java:3251)
java.lang.Thread.run(Thread.java:619)
150 SEVERE Thu Jun 27 13:56:00 SGT 2013
ANOMALY INFO::: Error while executing : COUNT TABLE:W_ORA_GLRF_DERV_F_TMP
MESSAGE:::com.siebel.etl.database.IllegalSQLQueryException: DataWarehouse:SELECT COUNT(*) FROM W_ORA_GLRF_DERV_F_TMP
ORA-00942: table or view does not exist
EXCEPTION CLASS::: java.lang.Exception
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:450)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.etl.engine.core.Session.getTargetTableRowCounts(Session.java:3375)
com.siebel.etl.engine.core.Session.run(Session.java:3251)
java.lang.Thread.run(Thread.java:619)
::: CAUSE :::
MESSAGE:::DataWarehouse:SELECT COUNT(*) FROM W_ORA_GLRF_DERV_F_TMP
ORA-00942: table or view does not exist
EXCEPTION CLASS::: com.siebel.etl.database.IllegalSQLQueryException
com.siebel.etl.database.DBUtils.executeQuery(DBUtils.java:160)
com.siebel.etl.database.WeakDBUtils.executeQuery(WeakDBUtils.java:242)
com.siebel.analytics.etl.etltask.CountTableTask.doExecute(CountTableTask.java:99)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.etl.engine.core.Session.getTargetTableRowCounts(Session.java:3375)
com.siebel.etl.engine.core.Session.run(Session.java:3251)
java.lang.Thread.run(Thread.java:619)
::: CAUSE :::
MESSAGE:::ORA-00942: table or view does not exist
EXCEPTION CLASS::: java.sql.SQLSyntaxErrorException
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:194)
oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:853)
oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1145)
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1267)
oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1469)
oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:389)
com.siebel.etl.database.cancellable.CancellableStatement.executeQuery(CancellableStatement.java:69)
com.siebel.etl.database.DBUtils.executeQuery(DBUtils.java:150)
com.siebel.etl.database.WeakDBUtils.executeQuery(WeakDBUtils.java:242)
com.siebel.analytics.etl.etltask.CountTableTask.doExecute(CountTableTask.java:99)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.etl.engine.core.Session.getTargetTableRowCounts(Session.java:3375)
com.siebel.etl.engine.core.Session.run(Session.java:3251)
java.lang.Thread.run(Thread.java:619)
151 SEVERE Thu Jun 27 13:56:12 SGT 2013 Number of running sessions : 10
152 SEVERE Thu Jun 27 13:56:12 SGT 2013 Number of running sessions : 10
153 SEVERE Thu Jun 27 13:56:13 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.txt SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
154 SEVERE Thu Jun 27 13:56:13 SGT 2013 Number of running sessions : 10
155 SEVERE Thu Jun 27 13:56:17 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_APTermsDimension_Full' has completed with error code 0
156 SEVERE Thu Jun 27 13:56:18 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_PartyContactStaging_Full' has completed with error code 0
157 SEVERE Thu Jun 27 13:56:18 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_MovementTypeDimension' has completed with error code 0
158 SEVERE Thu Jun 27 13:56:18 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionSourceDimension_AP_LKP_Extract_Full' has completed with error code 0
159 SEVERE Thu Jun 27 13:56:19 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_TransactionSourceDimension_AP_CC_Extract' has completed with error code 0
160 SEVERE Thu Jun 27 13:56:38 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_APTermsDimension_Full.txt SDE_ORA_APTermsDimension_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
161 SEVERE Thu Jun 27 13:56:38 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_PartyContactStaging_Full.txt SDE_ORA_PartyContactStaging_Full
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
162 SEVERE Thu Jun 27 13:56:38 SGT 2013 Number of running sessions : 10
163 SEVERE Thu Jun 27 13:56:38 SGT 2013 Number of running sessions : 9
164 SEVERE Thu Jun 27 13:56:39 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1212_Flatfile.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_TransactionSourceDimension_AP_CC_Extract.txt SDE_ORA_TransactionSourceDimension_AP_CC_Extract
Status Desc : Succeeded
WorkFlowMessage : Workflow executed successfully.
Error Message : Successfully completed.
ErrorCode : 0
165 SEVERE Thu Jun 27 13:56:39 SGT 2013 Number of running sessions : 8
166 SEVERE Thu Jun 27 13:56:44 SGT 2013 Request to start workflow : 'SDE_ORAR1212_Adaptor:SDE_ORA_GL_COGS_LinkageInformation_Extract_Full' has completed with error code 0
167 SEVERE Thu Jun 27 13:57:04 SGT 2013 pmcmd startworkflow -sv INT_AFDROBI -d Domain_AFDRBI -u Administrator -p **** -f SDE_ORAR1212_Adaptor -lpf C:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\ORA_R1211.DataWarehouse.SDE_ORAR1212_Adaptor.SDE_ORA_GL_COGS_LinkageInformation_Extract_Full.txt SDE_ORA_GL_COGS_LinkageInformation_Extract_Full
Status Desc : Succeeded
After certain tasks I found Informatica workflow did not run. In my case after 190 of 403 tasks but sometime 183 of 403 tasks so it is intermittent.
This sample tasks that is still running.
SDE_ORA_EmployeeDimension
SDE_ORA_GeoCountryDimension
SDE_ORA_MovementTypeDimension
SDE_ORA_Project
SDE_ORA_StatusDimension_ProjectStatus
SDE_ORA_TransactionSourceDimension_AP_LKP_Extract
SDE_ORA_TransactionTypeDimension_APDerive
SDE_ORA_TransactionTypeDimension_GLCOGSDerive
In Informatica Monitor I found this
The Integration Service INT_AFDROBI is alive. Ping time is 0 ms.
The Integration Service INT_AFDROBI is alive. Ping time is 0 ms.
The Integration Service INT_AFDROBI is alive. Ping time is 0 ms.
The Integration Service INT_AFDROBI is alive. Ping time is 0 ms.
Is it mean something?
I have tried to bounce the server bounce the dac server and start ETL but problem still happen.
Did I miss something on DAC or Informatica configuration?
Thanks
Joni

Hi Naga,
NagarajuCool Jul 8, 2013 6:49 AM (in response to JonHi Naga
1)Check once Relational connections of workflow manager.
Same with tns name
2)Name should be same in workflow manager,ODBC and DAC client.
in DAC I set same with SID -->connection test successful
3)Have you mentioned custom properties in informatica integration service
overrideMpltVarwithMapVar Yes
4)stop infa services and copy pmcmd file from server to client and start sevrices.
Done
5)And check once all DAC configuration once.
Done
After applied above setting DAC Execution Plan for Financial Analytics still take long time. Anything I should try?
Thanks,
Joni
Branch
Report Abuse
Like (0)
Reply

How can I perform data logging for a specific time??

hello everyone,
I am quite new in labview and I have a basic question regarding data logging. Currently I am using a cRIO9074 and doing some data logging for my test. The data logging it self works ok so far.
But my problem is I would like to write my datas in a text file either for a specific time interval (ex)10 seconds) or for a specific amounts of data (ex)500 Samples). Can anyone give me some help regarding my problem?? Attached you can find my RT.vi
I would appreciate for anyhelp!
Regards
Yun
Attachments:
BP250 Encoder Position & Velocity (Host).vi ‏92 KB

Run your loggging program for that time. When your program terminates then it will write all the logged data so far in text file.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Bypassing Execution Policy for a specific host

Similar Messages

Maybe you are looking for