C API

Hi,
I was looking for a C API that worked like JMS and found the C API that comes with SUN MQs. Do you know if this C API works with other message brokers like MQ from Websphere? I need an open source API. Do you know if the C API from SUN is open source? The manual of the C API says that it only works with the enterprise edition (special license required) of the mq's from SUN, but it doesn't say if the API alone is free.
If this api isn't free, do you know other c apis that work like jms and that are open source?
Thanks in advance
Veronica

NO SUN MQ C-API only works with SUN Message Queue product. The JMS standard only applies to Java so you will find that all C-API will be propriety implementations.
Tom

Similar Messages

  • Unable to capture user comments and responder in RESPOND API

    We are building a custom application that uses Oracle Workflow underneath. The application users and responsibilities have been integrated into Workflow. Notifications are acknowledged and responded to directly from the application using the PL/SQL Notification APIs.
    When using the wf_notification.respond API with the appropriate user and comment information filled in, we are still unable to capture the responder information as well as the reponders comments. In other words, the RESPONDER and USER_COMMENT fields in the WF_NOTIFICATION is blank. However, the response does seem to go through otherwise. Do we need to set some kind of user context outside of just setting the response attributes and calling the respond API? Following is the code....
    owf_mgr.wf_notification.setattrtext(p_nid,
                   'RESULT'          ,
                   'APPROVED');
    -- This procedure then caused the WF to advance to next step
    -- Respond to notification, depends on RESULT setattrtext above
    owf_mgr.wf_notification.respond(     p_nid, -- notification id     
         p_respond_comment,     -- response_comment
    p_responder     );     --responder role
    Any help is greatly appreciated.
    Thanks,
    Raj

    If you are on 11.5.10 or greater or standalone 2.6.4 if you pass the responder value to wf_notification.respond API it should be updated in wf_notifications.responder column. The comments is now updated in wf_comments table against the notification id and not wf_notifications.user_comment column.
    Thanks, Vijay

  • SR Log Error - |  Message  : com.sap.esi.uddi.sr.api.exceptions.SRException

    Hi,
    We are getting below errors in /nwa/logs. We have our PI (7.11) and Service Registry configured on the same server. And have out CE (7.2) system connected to this service registry. Does any one has similar experience? Please let me know if you have any solution for the same.
    SR Log Error
    |  11-Nov-11  14:10:45.568
    |  Method   : getClassificationSystems()
    |  Class    : com.sap.esi.uddi.sr.api.ws.ServicesRegistrySiImplBean
    |  ThreadID : 146
    |  Message  : com.sap.esi.uddi.sr.api.exceptions.SRException: No classification system found for ID 'QName: Namespace= http://uddi.sap.com/classification; Name=  ConfigurationFlags'
    |
    |       com.sap.esi.uddi.sr.impl.common.Utility.cs2srException(Utility.java:122)
    |       com.sap.esi.uddi.sr.impl.ejb.ServicesRegistryBean.getClassificationSystems(ServicesRegistryBean.java:242)
    |       sun.reflect.GeneratedMethodAccessor1325.invoke(Unknown Source)
    |       sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    |       java.lang.reflect.Method.invoke(Method.java:585)
    |       com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    |       com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
    |       $Proxy1087.getClassificationSystems(Unknown Source)
    |       com.sap.esi.uddi.sr.api.ws.ServicesRegistrySiImplBean.getClassificationSystems(ServicesRegistrySiImplBean.java:456)
    |       sun.reflect.GeneratedMethodAccessor1324.invoke(Unknown Source)
    |       sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    |       java.lang.reflect.Method.invoke(Method.java:585)
    |       com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_WS.invoke(Interceptors_WS.java:31)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    |       com.sap.engine.services.ejb3.webservice.impl.DefaultImplementationContainer.invokeMethod(DefaultImplementationContainer.java:203)
    |       com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process0(RuntimeProcessingEnvironment.java:512)
    |       com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:486)
    |       com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:256)
    |       com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:176)
    |       com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWithLogging(ServletDispatcherImpl.java:112)
    |       com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:70)
    |       SoapServlet.doPost(SoapServlet.java:51)
    |       javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
    |       javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
    |       com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
    |       com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
    |       com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:486)
    |       com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298)
    |       com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
    |       com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
    |       com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:245)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
    |       com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
    |       com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428)
    |       com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247)
    |       com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
    |       com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
    |       com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
    |       com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    |

    Hi,
    Refer Error:Service Registyr Configuration PI 7.11
    and http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8071b1b8-3c5c-2e10-e7af-8cadbc49d711?QuickLink=index&overridelayout=true
    Thanks,
    Chandra

  • Is There any API in receivables payment will made against closed invoices ?

    Hi ALL,
    i have requirement as below.
    i am doing AR Invoice Data Migration for Instance 11.5.5 (as a Source Instance) to the new instance R12 (as a target instance).
    Both open and closed invoices will have to be migrated from 11.5.5 to R12 to provide the drill down facility for audit purpose.
    To meet the above requirement all the open and closed invoice will be picked up from 11.5.5 ; and imported into R12..
    Subsequently, full payment will be made in R12 against all closed invoices in 11.5.5 to close those invoices by using any APIs?
    can some one explain is there any API in receivables payment will made against closed invoices.
    Thanks,
    VSR.

    Hi,
    Can you be clear on your question: You want any API to make payment against closed invoices?
    To me, You are making things complex. We can achieve the Migration of Closed invoices using following two procedures:
    Procedure: 1
    Ask Functional Guy to create a Transaction Type 'Closed Invoices' with Open to Receivables Flag not checked. +(You can uncheck Post to GL flag also, if required depending on your migration strategy)+. Status at Transaction Type if taken as 'Closed' it will be appropriate.
    Invoices migrated using this Transaction Type shall not be shown as Outstanding but will be useful for Audit.
    Procedure: 2
    Consider the amount due Original of Closed Invoices and migrate them with the amount as Amount due remaining.
    While migrating populate Receipt Method,Payment Method and Instruments useful for Automatic Receipts.
    Once Create Automatic Receipts Program is run, it will close all these invoices. Note: We require dummy bank here which points to a Clearing account.
    Automatic Receipts program is also an API.
    In the above 2 ways, we are acheiving the Goal by using Functional knowledge rather than Technical. And I think following Functional way is better and less time consuming.
    Please discuss with your Functional consultant if required. You can succeed.
    Regards,
    Sridhar

  • Error while creating new projects using api

    Hello,
    I am having error while creating projects using standard api, PA_PROJECT_PUB.CREATE_PROJECTS. The error I am having is as follow.
    Source template ID is invalid.
    ===
    My code is as follow:
    SET SERVEROUTPUT ON SIZE 1000000
    SET VERIFY OFF
    define no=&amg_number
    DECLARE
    -- Variables used to initialize the session
    l_user_id NUMBER;
    l_responsibility_id NUMBER;
    cursor get_key_members is
    select person_id, project_role_type, rownum
    from pa_project_players
    where project_id = 1;
    -- Counter variables
    a NUMBER := 0;
    m NUMBER := 0;
    -- Variables needed for API standard parameters
    l_commit VARCHAR2(1) := 'F';
    l_init_msg_list VARCHAR2(1) := 'T';
    l_api_version_number NUMBER :=1.0;
    l_return_status VARCHAR2(1);
    l_msg_count NUMBER;
    l_msg_data VARCHAR2(2000);
    -- Variables used specifically in error message retrieval
    l_encoded VARCHAR2(1) := 'F';
    l_data VARCHAR2(2000);
    l_msg_index NUMBER;
    l_msg_index_out NUMBER;
    -- Variables needed for Oracle Project specific parameters
    -- Input variables
    l_pm_product_code VARCHAR2(30);
    l_project_in pa_project_pub.project_in_rec_type;
    l_key_members pa_project_pub.project_role_tbl_type;
    l_class_categories pa_project_pub.class_category_tbl_type;
    l_tasks_in pa_project_pub.task_in_tbl_type;
    -- Record variables for loading table variables above
    l_key_member_rec pa_project_pub.project_role_rec_type;
    l_class_category_rec pa_project_pub.class_category_rec_type;
    l_task_rec pa_project_pub.task_in_rec_type;
    -- Output variables
    l_workflow_started VARCHAR2(100);
    l_project_out pa_project_pub.project_out_rec_type;
    l_tasks_out pa_project_pub.task_out_tbl_type;
    -- Exception to call messag handlers if API returns an error.
    API_ERROR EXCEPTION;
    BEGIN
    -- Initialize the session with my user id and Projects, Vision Serves (USA0
    -- responsibility:
    select user_id into l_user_id
    from fnd_user
    where user_name = 'SSHAH';
    select responsibility_id into l_responsibility_id
    from fnd_responsibility_tl
    where responsibility_name = 'Projects Implementation Superuser';
    pa_interface_utils_pub.set_global_info(
    p_api_version_number => l_api_version_number,
    p_responsibility_id => l_responsibility_id,
    p_user_id => l_user_id,
    p_msg_count => l_msg_count,
    p_msg_data => l_msg_data,
    p_return_status => l_return_status);
    if l_return_status != 'S' then
    raise API_ERROR;
    end if;
    -- Provide values for input variables
    -- L_PM_PRODUCT_CODE: These are stored in pa_lookups and can be defined
    -- by the user. In this case we select a pre-defined one.
    select lookup_code into l_pm_product_code
    from pa_lookups
    where lookup_type = 'PM_PRODUCT_CODE'
    and meaning = 'Conversion';
    -- L_PROJECT_IN: We have to provide values for all required elements
    -- of this record (see p 5-13, 5-14 for the definition of the record).
    -- Customers will normally select this information from some external
    -- source
    l_project_in.pm_project_reference := 'AGL-AMG Project &no';
    l_project_in.project_name := 'AGL-AMG Project &no';
    l_project_in.created_from_project_id := 1;
    l_project_in.carrying_out_organization_id := 2864; /*Cons. West*/
    l_project_in.project_status_code := 'UNAPPROVED';
    l_project_in.start_date := '01-JAN-11';
    l_project_in.completion_date := '31-DEC-11';
    l_project_in.description := 'Trying Hard';
    l_project_in.project_relationship_code := 'Primary';
    -- L_KEY_MEMBERS: To load the key member table we load individual
    -- key member records and assign them to the key member table. In
    -- the example below I am selecting all of the key member setup
    -- from an existing project with 4 key members ('EE-Proj-01'):
    for km in get_key_members loop
    -- Get the next record and load into key members record:
    l_key_member_rec.person_id := km.person_id;
    l_key_member_rec.project_role_type := km.project_role_type;
    -- Assign this record to the table (array)
    l_key_members(km.rownum) := l_key_member_rec;
    end loop;
    -- L_CLASS_CATEGORIES: commented out below should fix the error we get
    -- because the template does not have an assigment for the mandatory class
    -- 'BAS Test'
    l_class_category_rec.class_category := 'Product';
    l_class_category_rec.class_code := 'Non-classified';
    -- Assign the record to the table (array)
    l_class_categories(1) := l_class_category_rec;
    -- L_TASKS_IN: We will load in a single task and a subtask providing only
    -- the basic fields (see pp. 5-16,5-17,5-18 for the definition of
    -- the task record)
    l_task_rec.pm_task_reference := '1';
    l_task_rec.pa_task_number := '1';
    l_task_rec.task_name := 'Construction';
    l_task_rec.pm_parent_task_reference := '' ;
    l_task_rec.task_description := 'Plant function';
    -- Assign the top task to the table.
    l_taskS_in(1) := l_task_rec;
    -- Assign values for the sub task
    l_task_rec.pm_task_reference := '1.1';
    l_task_rec.pa_task_number := '1.1';
    l_task_rec.task_name := 'Brick laying';
    l_task_rec.pm_parent_task_reference := '1' ;
    l_task_rec.task_description := 'Plant building';
    -- Assign the subtask to the task table.
    l_tasks_in(2) := l_task_rec;
    -- All inputs are assigned, so call the API:
    pa_project_pub.create_project
    (p_api_version_number => l_api_version_number,
    p_commit => l_commit,
    p_init_msg_list => l_init_msg_list,
    p_msg_count => l_msg_count,
    p_msg_data => l_msg_data,
    p_return_status => l_return_status,
    p_workflow_started => l_workflow_started,
    p_pm_product_code => l_pm_product_code,
    p_project_in => l_project_in,
    p_project_out => l_project_out,
    p_key_members => l_key_members,
    p_class_categories => l_class_categories,
    p_tasks_in => l_tasks_in,
    p_tasks_out => l_tasks_out);
    -- Check the return status, if it is not success, then raise message handling
    -- exception.
    IF l_return_status != 'S' THEN
    dbms_output.put_line('Msg_count: '||to_char(l_msg_count));
    dbms_output.put_line('Error: ret status: '||l_return_status);
    RAISE API_ERROR;
    END IF;
    -- perform manual commit since p_commit was set to False.
    COMMIT;
    --HANDLE EXCEPTIONS
    EXCEPTION
    WHEN API_ERROR THEN
    FOR i IN 1..l_msg_count LOOP
    pa_interface_utils_pub.get_messages(
    p_msg_count => l_msg_count,
    p_encoded => l_encoded,
    p_msg_index => i,
    p_msg_data => l_msg_data,
    p_data => l_data,
    p_msg_index_out => l_msg_index_out);
    dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
    END LOOP;
    rollback;
    WHEN OTHERS THEN
    dbms_output.put_line('Error: '||sqlerrm);
    FOR i IN 1..l_msg_count LOOP
    pa_interface_utils_pub.get_messages(
    p_msg_count => l_msg_count,
    p_encoded => l_encoded,
    p_msg_index => i,
    p_msg_data => l_msg_data,
    p_data => l_data,
    p_msg_index_out => l_msg_index_out);
    dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
    END LOOP;
    rollback;
    END;
    ===
    Msg_count: 1
    Error: ret status: E
    ERROR: 1: Project: 'AGL-AMG Project 1123'
    Source template ID is invalid.
    PL/SQL procedure successfully completed.

    I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)

  • Error While trying to Convert a Date Value to string in POI API (Excel)

    Hi
    How can I convet a date value in excel to string value ? I am using POI API for excel sheet reading in JSP .

    Hello Esther,
    the problem seems to be that the temp folder of the target Integration Builder system can't be found:
    'The system cannot find the path specified
    at [..] FileAccess.getTempDirectory([..])'.
    You'll experience the same problem if you try a file based import or export within the Integration Builder directly.
    I would recommend to continue the search there. You could check if the environment variables (for Windows: TEMP and TMP) of the OS of the system with the target Integration Builder to an existing path. Check also if the WebAs can access this path.
    Good luck
    Frank

  • Error while invoking a public PL/SQL API in EBIZ from Sync BPEL process

    Hi,
    SOA Suite: 11.1.1.3
    I am getting the following error when I am invoking a public API in EBIZ from Oracle via a BPEL process. I am supplying the username/password via binding properties (as mentioned in other posts). Can someone point out that is the exact cause for this error please?
    SEVERE: AbstractWebServiceBindingComponent.dispatchRequest Unable to dispatch request to http://<myserver>:8006/webservices/SOAProvider/plsql/hz_party_v2pub/ due to exceptionjavax.xml.ws.soap.SOAPF
    aultException: Error occured while service was processing.
    at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:874)
    at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:707)
    at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:226)
    at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:97)
    at oracle.integration.platform.blocks.soap.AbstractWebServiceBindingComponent.dispatchRequest(AbstractWebServiceBindingComponent.java:449)
    at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.processOutboundMessage(WebServiceExternalBindingComponent.java:184)
    at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.sendSOAPMessage(WebServiceExternalBindingComponent.java:634)
    at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.request(WebServiceExternalBindingComponent.java:520)
    at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
    at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
    at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
    at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy204.request(Unknown Source)
    at oracle.fabric.CubeServiceEngine.requestToMesh(CubeServiceEngine.java:704)
    at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:246)
    at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:935)
    at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.handleNormalInvoke(BPELInvokeWMP.java:440)
    at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:182)
    at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:140)
    at com.collaxa.cube.engine.CubeEngine._performActivity(CubeEngine.java:2675)
    at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2558)
    at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1256)
    at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:188)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:285)
    at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4607)
    at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:828)
    at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java:111)
    at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke(CubeEngineBean.java:147)
    at com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean.syncCreateAndInvoke(BPELEngineBean.java:103)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy193.syncCreateAndInvoke(Unknown Source)
    at com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean_51369e_ICubeEngineLocalBeanImpl.syncCreateAndInvoke(BPELEngineBean_51369e_ICubeEngineLocalBeanImpl.java:575)
    at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequestAnyType(DeliveryHandler.java:528)
    at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequest(DeliveryHandler.java:482)
    at com.collaxa.cube.engine.delivery.DeliveryHandler.request(DeliveryHandler.java:156)
    at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.request(CubeDeliveryBean.java:600)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy190.request(Unknown Source)
    at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.request(BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.java:325)
    at oracle.fabric.CubeServiceEngine.request(CubeServiceEngine.java:290)
    at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
    at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
    at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
    at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy204.request(Unknown Source)
    at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1155)
    at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:767)
    at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
    at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1119)
    at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:873)
    at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:553)
    at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:202)
    at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:166)
    at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:384)
    at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:444)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Nov 3, 2010 2:32:08 PM com.collaxa.cube.CubeLogger error
    SEVERE: <WSInvocationManager::invoke> got FabricInvocationException
    oracle.fabric.common.FabricInvocationException: javax.xml.ws.soap.SOAPFaultException: Error occured while service was processing.
    Thanks,
    Dinesh

    Hi James,
    Thanks for the quick reply.
    We've tried to call that web service from an HTML designed in Visual Studios with the same username and password and its working fine.
    But on the BPEL console, we are getting the error as mentioned.
    Also if you can tell me how to set the user name and password in the header of the parter link.I could not find how to do it.
    Thanks,
    Saurabh

  • Error while creating a Foreign Currency Receipt using Create_Cash API

    Hi,
    I am working on AR Receipts converison in R12 and trying to create cash receipts using AR_RECEIPT_API_PUB.CREATE_CASH.
    Receipt gets created successfully when the currency_code is USD. Receipt Method i am passing is 'Manual Receipt'.
    When the currency_code is not USD (EUR in my case), I am passing the values for p_exchange_rate_type and p_exchange_rate_date.
    But the API Errors out without creating the foreign currency receipt giving the Error: AR_RAPI_RCT_MD_NAME_INVALID.
    When i was trying to look at the API for this error, I dont see this error at all in the API. I see an error with the name 'AR_RAPI_RCPT_MD_NAME_INVALID' but nothing shows up for the error 'AR_RAPI_RCT_MD_NAME_INVALID' ('P' missing in 'RCPT'). I dont know where this error is getting invoked from?
    I am not sure why the API is erroring out for foreign currency receipt saying Receipt Method Name is Invalid. But it works fine for currency_code USD having the same Receipt Method Name.
    Any help would be highly appreciated.
    Thanks in advance.
    Regards,
    Kesava

    Hi Anil,
    Thankyou so much for the response. The issue has been fixed.
    There was a configuration missing on the existing bank account setup. On the Account Information Tab, ‘Multiple Currencies Allowed’ was checked, but on the Account Controls Tab, Receivables Controls/’Multiple Currency Receipts’ was not checked.
    I have ensured that both of them are checked and I am now able to create multiple currency receipts.
    Appreciate your help.
    Thanks,
    Kesava Chunduri

  • DI API error while adding AP Invoice (Using serial Nos.)

    Hi,
    Im getting the following DI API error when adding an AP Invoice which has serial numbers and i cant seem to find any logical fault in the code.
    " [PCH1.WhsCode][line: 4] , 'This entry already exists in the following tables (ODBC -2035) "
    If anybody has encountered this error and found a solution kindly let me know.

    Hi Vivek,
    Are you trying to add same document number, serial number or so on?
    "entry exist " means like "duplicate key problem", I guess.
    Basically, whscode column in PCH1 table allows duplicating.
    So, I think serial number is duplicated among same item code.
    Hope this useful for you.
    Regards,
    Hyunil Choi.

  • Error while signing a document using API

    Hello. I'm using API functions to add a digital signature to a PDF document. While signing this document, I receive an error which looks like:
    com.adobe.livecycle.signatures.client.types.exceptions.PDFOperationException: ALC-DSS-303-001 Could not sign Signature Field MyField (in the operation : sign)
    Caused By: ALC-DSS-303-014 Subject name and the subject alt name missing. (in the operation : getSignerName)
    My source code is a straight copy/paste from the SDK Help. I can successfully add an unsigned signature field using API call, but I can't sign it. I can also sign my document manually from Adobe Acrobat Professional using the same certificate.
    I'm new in LiveCycle and digital signatures, so it might be some obvious reason that I just can't detect now.
    Could anyone help me, please?

    you can mail me directly to [email protected], and I'll try to help.
    no guarenty :-)
    Tal
    [email protected]

  • Error While Making a Request Through API

    Hi everyone,
    I'm trying to submit a request through the API for the "Assign Roles" template, I used http://java.net/projects/openptk/sources/svn/content/branches/Oracle/OIM11g/examples/java/OIMClient/src/oim/client/request/RequestRoleCreate.java?rev=1489 as a basis for my code. Pretty much line for line.
    This is my code.
    public static RequestStatusSummary[] applicationAccessRequest(String email, String templateName, String roleName) {
    String userKey = getUserKey(email);
    Beneficiary beneficiary = null;
    RequestBeneficiaryEntity entity = null;
    List<RequestBeneficiaryEntity> entityList = null;
    List<RequestBeneficiaryEntity> entityAttrList = null;
    // add role requested
    entityList = new ArrayList<RequestBeneficiaryEntity>();
    entity = new RequestBeneficiaryEntity();
    entity.setEntityKey(getRoleKey(roleName));
    entity.setEntityType(RequestConstants.ROLE);
    entity.setEntitySubType(roleName);
    entityList.add(entity);
    // set beneficiary to user
    beneficiary = new Beneficiary();
    beneficiary.setBeneficiaryType("user");
    beneficiary.setBeneficiaryKey(userKey);
    beneficiary.setTargetEntities(entityList);
    // add benficiaries to the request data
    List<Beneficiary> beneficiaries = new ArrayList<Beneficiary>();
    beneficiaries.add(beneficiary);
    requestData.setBeneficiaries(beneficiaries);
    System.out.println(requestData);
    // submit request
    String reqId = requestSvc.submitRequest(requestData);
    RequestStatusSummary[] requestStatusSummary = requestSvc.getRequestStatusSummary(reqId);
    return requestStatusSummary;
    getRoleKey() and getUserKey obtain the correct values. Directly before calling this method I log in to OIM using OIMClient this works correctly as well. The issue is that submitRequest() throws this. Any suggestions would be greatly appreciated. Thank you for your time.
    javax.ejb.EJBException: ; nested exception is:
         java.io.EOFException; nested exception is: java.io.EOFException
         at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:345)
         at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:826)
         at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:760)
         at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:941)
         at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:888)
         at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:339)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
    javax.ejb.EJBException: ; nested exception is:
         java.io.EOFException; nested exception is: java.io.EOFException
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.unwrapRemoteException(RemoteBusinessIntfProxy.java:121)
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:96)
         at $Proxy6.submitRequestx(Unknown Source)
         at oracle.iam.request.api.RequestServiceDelegate.submitRequest(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.security.Security.runAs(Security.java:41)
         at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
         at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
         at $Proxy7.submitRequest(Unknown Source)
         at testoimlogin.TestOIMLogin.applicationAccessRequest(TestOIMLogin.java:350)
         at testoimlogin.TestOIMLogin.main(TestOIMLogin.java:537)
    Caused by: java.io.EOFException
         at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:345)
         at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:826)
         at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:760)
         at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:941)
         at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:888)
         at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:339)
         at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
         at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)

    How are you creating OIMClient ?
    Make sure that you are using proper OIM URL: t3://ManagerServer:MANAGEDSERVERPORT
    getting error while calling RequestService interface

  • Creation of a Request in OIM 11G using API's

    Hi Friends,
    I am trying to create a request using OIM 11g API's.
    I am trying to do this for EBS Responsibility resource and this resource has a request dataset has EBS-IT-Resource-Instance, application name, responsibility name, start date and security group. Please note application name, responsibility name, start date and security group are in child form.
    I am trying to populate the request dataset using the below code.
    List<RequestBeneficiaryEntityAttribute> entityAttrList;
    RequestBeneficiaryEntity entity = null;
    entityAttrList = new ArrayList<RequestBeneficiaryEntityAttribute>();
    entity = new RequestBeneficiaryEntity();
    tcITResourceInstanceOperationsIntf tcITResourceIntf = Platform.getService(tcITResourceInstanceOperationsIntf.class);
    HashMap searchcriteria = new HashMap<String, String>();
    searchcriteria.put("IT Resources.Name", "EBSHF-APPS12");
    tcResultSet resultSet = tcITResourceIntf.findITResourceInstances(searchcriteria);
    long itResourceKey=resultSet.getLongValue("IT Resources.Key");
    entityAttrList.add(this.getAttrLong("eBusiness Suite Instance Name",itResourceKey));
    entityAttrList.add(this.getAttr("Application Name","3~300"));
    entityAttrList.add(this.getAttr("Responsibility Name", "3~300~52281"));
    entityAttrList.add(this.getAttr("Security Group", "3~0"));
    entity.setEntityKey(getResourceKey("Oracle eBusiness Responsibility"));
    entity.setEntityType(RequestConstants.RESOURCE);
    entity.setEntitySubType("Oracle eBusiness Responsibility");
    entity.setEntityData(entityAttrList);
    private RequestBeneficiaryEntityAttribute getAttr(String name, String value)
    RequestBeneficiaryEntityAttribute attr = null;
    attr = new RequestBeneficiaryEntityAttribute(name, value, RequestBeneficiaryEntityAttribute.TYPE.String);
    return attr;
    private RequestBeneficiaryEntityAttribute getAttrLong(String name, long value)
    RequestBeneficiaryEntityAttribute attr = null;
    attr = new RequestBeneficiaryEntityAttribute(name, value, RequestBeneficiaryEntityAttribute.TYPE.Long);
    return attr;
    My code is working fine and a request is getting created. But when I try to open the request dataset(object form) for the newly created request, I am getting null exceptions.
    If I did not populate the fields that are in the child form application name, responsibility name and security group which are highlighted above, then I am able to view the form with the correct IT-Resource-Instance name after request creation.
    So, I am thinking I am doing something wrong while populating child form data in the request dataset.
    Can you please provide me some code snippet to populate the child using 11G API'S?

    Hi Bikash,
    After referring your code, i made changes in mine. Here is my updated code.
    RequestBeneficiaryEntityAttribute parantAttr=null;
    List<RequestBeneficiaryEntityAttribute> entityAttrList;
    RequestBeneficiaryEntity entity = null;
    entity = new RequestBeneficiaryEntity();
    parantAttr=this.getAttrLong("eBusiness Suite Instance Name", itResourceKey);
    RequestBeneficiaryEntityAttribute mid1 = new RequestBeneficiaryEntityAttribute();
    List <RequestBeneficiaryEntityAttribute> childAttributesList = new ArrayList<RequestBeneficiaryEntityAttribute>();
    childAttributesList.add(this.getAttr("Application Name", "3~555"));
    childAttributesList.add(this.getAttr("Responsibility Name", "3~555~22862"));
    childAttributesList.add(this.getAttr("Security Group", "3~0"));
    mid1.setChildAttributes(childAttributesList);
    mid1.setAction(RequestBeneficiaryEntityAttribute.ACTION.Add);
    entityAttrList = new ArrayList<RequestBeneficiaryEntityAttribute>();
    entityAttrList.add(parantAttr);
    entityAttrList.add(mid1);
    But when I try to run this, it is getting failed saying "RequestServiceException: IAM-2050033:Invalid attribute name null. No corresponding reference was found in the data set ProvisionResourceOracle eBusiness Responsibility".
    Here is my request data set for your reference.
    <AttributeReference name="eBusiness Suite Instance Name" attr-ref="eBusiness Suite Instance Name" type="Long" length="50" widget="itresource-lookup" required="true" available-in-bulk="true" itresource-type="eBusiness Suite UM"/>
    <AttributeReference available-in-bulk="true" length="10" widget="text" type="String" attr-ref="UD_EBH_RSCP" name="EBS HR Foundation User Responsibilities">
    <AttributeReference name="Application Name" attr-ref="Application Name" type="String" length="256" widget="lookup-query" available-in-bulk="true" required="true">
    <lookupQuery lookup-query="select lkv_encoded as Value,lkv_decoded as Description from lkv lkv, lku lku where lkv.lku_key=lku.lku_key and lku_type_string_key='Lookup.EBS.Application' and lkv_encoded like concat('$Form data.eBusiness Suite Instance Name', '~%')" display-field="Description" save-field="Value"/>
    </AttributeReference>
    <AttributeReference name="Responsibility Name" attr-ref="Responsibility Name" type="String" length="256" widget="lookup-query" available-in-bulk="true" required="true" primary="true">
    <lookupQuery lookup-query="select lkv_encoded as Value,lkv_decoded as Description from lkv lkv,lku lku where lkv.lku_key=lku.lku_key and lku_type_string_key='Lookup.EBS.Responsibility' and lkv_encoded like concat('$Form data.Application Name','~%')" display-field="Description" save-field="Value"/>
    </AttributeReference>
    <AttributeReference name="Security Group" attr-ref="Security Group" type="String" length="256" widget="lookup-query" available-in-bulk="true" required="true">
    <lookupQuery lookup-query="select lkv_encoded as Value,lkv_decoded as Description from lkv lkv, lku lku where lkv.lku_key=lku.lku_key and lku_type_string_key='Lookup.EBS.SecurityGroup' and lkv_encoded like concat('$Form data.eBusiness Suite Instance Name', '~%')" display-field="Description" save-field="Value"/>
    </AttributeReference>
    I am not sure why it is not referencing to the attribute. In your blog, it is saying your code is to set process form. But i am trying to create a request using API's. so, I need some code snippet to populate request dataset. Do you think, this will serve both?
    Thanks for your help.

  • Need API for creation of tag cloud

    Hi,
    I have a requirement to create a tag cloud based on a particular business logic. Does Webcenter provide API for the same?
    Can I customize the "Tagging - Tag Cloud" task flow? If yes, how and to what extent?
    Thanks in advance,
    Anurag

    Hi  Ajit,
      No another FM is available . U can directly create using transaction SE01 .
    Or u can create using BDC .

  • How to strore keys in KeyStores..of JCE Api..

    Hi ,
    i'm trying to implement a program mySignature that creates and verifies digital signatures using Java Cryptography Extension.
    I am using the DSA Algorithm for encryption.
    Now the problem is once i create the private keys and public keys i am not able to store them to the KeyStore.
    here is the code I wrote
    package my.security.test;
    import java.io.BufferedInputStream;
    import java.io.FileInputStream;
    import java.io.FileNotFoundException;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.security.Certificate;
    import java.security.InvalidAlgorithmParameterException;
    import java.security.InvalidKeyException;
    import java.security.KeyPair;
    import java.security.KeyPairGenerator;
    import java.security.KeyStore;
    import java.security.KeyStoreException;
    import java.security.NoSuchAlgorithmException;
    import java.security.NoSuchProviderException;
    import java.security.PrivateKey;
    import java.security.PublicKey;
    import java.security.SecureRandom;
    import java.security.Signature;
    import java.security.SignatureException;
    import java.security.cert.CertificateException;
    import java.security.cert.CertificateFactory;
    import java.security.interfaces.RSAPrivateKey;
    import java.security.interfaces.RSAPublicKey;
    import java.security.spec.RSAKeyGenParameterSpec;
    * @author sandeepk
    * To change this generated comment edit the template variable "typecomment":
    * Window>Preferences>Java>Templates.
    * To enable and disable the creation of type comments go to
    * Window>Preferences>Java>Code Generation.
    public class MySignature {
         public static void main(String[] args) {
              KeyPairGenerator keyGen = null;
              FileOutputStream sigfos = null;
              try {
                   Signature signature = Signature.getInstance("SHA1withDSA", "SUN");
                   keyGen = KeyPairGenerator.getInstance("DSA", "SUN");
                   keyGen.initialize(1024);
                   KeyPair keyPair = keyGen.generateKeyPair();
                   PrivateKey privateKey = keyPair.getPrivate();
                   PublicKey publicKey = keyPair.getPublic();
                   KeyStore ks = KeyStore.getInstance("JKS", "SUN");
                   System.out.println("Here1");
                   ks.setKeyEntry("privkey", privateKey, "pass".toCharArray(), null);
                   System.out.println("Here2");
                   ks.setKeyEntry("pubkey", publicKey, "pass".toCharArray(), null);
                   System.out.println("Here3");
                   sigfos = new FileOutputStream("C:\\keystore");
                   ks.store(sigfos, "pass".toCharArray());
                   signature.initSign(privateKey);
                   // Reading the contents of them message file               
                   FileInputStream fis = new FileInputStream("C:\\message.txt");
                   BufferedInputStream bufin = new BufferedInputStream(fis);
                   byte[] buffer = new byte[1024];
                   int len;
                   while (bufin.available() != 0) {
                        len = bufin.read(buffer);
                        signature.update(buffer, 0, len);
                   bufin.close();
                   // Writng the signature to a file
                   byte[] realSig = signature.sign();
                   sigfos = new FileOutputStream("C:\\sig.txt");
                   sigfos.write(realSig);
                   sigfos.close();
              } catch (InvalidKeyException e) {
                   e.printStackTrace();
              } catch (NoSuchAlgorithmException e) {
                   e.printStackTrace();
              } catch (FileNotFoundException e) {
                   e.printStackTrace();
              } catch (SignatureException e) {
                   e.printStackTrace();
              } catch (IOException e) {
                   e.printStackTrace();
              } catch (NoSuchProviderException e) {
                   e.printStackTrace();
              } catch (KeyStoreException e) {
                   e.printStackTrace();
              }catch(CertificateException e){
                   e.printStackTrace();
    I get an error while i try to store the key on to the KeyStore, if I comment out these lines of code the program runs without any probs.
    Can any one help me with this issue, i'ld be thank full to them
    -Chau
    Sandy

    We use 'PDDocCreateWordFinder' , 'PDWordFinderEnumWords' to extract the text from Adobe Reader document through Code, Not tool.
    But, by using these APIs, I can't see any difference in 'new line/row' or 'paragraph' if exists in PDF doc.
    I need such API which can give the exact format of Adobe Reader doc according to the content exists in that PDF doc.
    Thanks!

  • How to populate Values in Value Set via API or Interface

    Dear frds:
    i need to know is there any API or interface available to load thousands of values in particular valueset via API or Interface. I know Dataload is the alternative but i don't want to use that as the data is too much so its not feasible.
    waiting for your response
    Thanks.

    There is no API for fnd_flex_values.
    You will have to do a direct table insert (or call FND_FLEX_VALUES_PKG which does nothing but a direct table insert).
    Sandeep Gandhi

  • I am not able to assign job_id  in my Assignment api

    Hi
    Can anybody help me
    I am created one for create job using hr_job_api
    What am trying to assign my job_id to assignment api
    logic is
    If the job is not it creates job using job api,
    If job is already exists it assign to assignment api
    CREATE OR REPLACE PROCEDURE xxhr_job_proc IS
    l_assignment_number number;          
    l_assignment_id      number;          
    v_special_ceiling_step_id          number;          
    v_object_version_number           number;     
    V_concatenated_segments      number;     
    V_soft_coding_keyflex_id      number;     
    V_comment_id      number;     
    v_effective_start_date      date;     
    v_effective_end_date      date;     
    V_no_managers_warning      boolean;     
    V_other_manager_warning      boolean;     
    v_num number;     
    v_seg_conc VARCHAR2(2000);     
    l_change_reason                    varchar2(50);     
    l_date_probation_end                date;          
    l_default_code_comb_id               number;          
    l_set_of_books_id               number;     
    G_USER_ID                     number;     
    G_LOGIN_ID                    number;     
    v_resp_id                     number;     
    v_resp_APPL_id                    number;     
    v_assignment_id                    number;
    v_org_id number;
    l_object_version_number number;
    l_effective_date date;
    v_job_id                    NUMBER;
    v_job_definition_id                NUMBER;
    v_business_group_id               NUMBER;
    v_name                          VARCHAR2(240);
    l_job_id                    number;
    l_job_group_id                    number;
    CURSOR Job_emp Is
         SELECT      empl_id
              ,empl_rcd_nbr
              ,effective_date
              ,effective_sequence
              ,rehire_date
              ,probation_date
              ,department
              ,supervisor_id
              ,direct_manager_id
              ,location_code
              ,reason_code
              ,action
              ,salary_grade
              ,job_code
              ,full_or_part_time
              ,hr_responsible_id
         FROM xxhr_job_all;
    BEGIN
         G_USER_ID                := FND_PROFILE.VALUE('USER_ID');
         G_LOGIN_ID                := FND_PROFILE.VALUE('LOGIN_ID');
    v_org_id := FND_PROFILE.VALUE('ORG_ID');
         v_resp_id                := FND_PROFILE.VALUE('RESP_ID');
         v_resp_APPL_id               := FND_PROFILE.VALUE('RESP_APPL_ID');
    v_business_group_id          := FND_PROFILE.VALUE('PER_BUSINESS_GROUP_ID');
         FND_GLOBAL.APPS_INITIALIZE(G_USER_ID,v_resp_id,v_resp_APPL_id);
    -- Open the Cursor for Validation
    FOR v_job_emp IN job_emp LOOP
         SELECT fnd_flex_ext.get_ccid('PER',
                             'JOB',
                             101,
                             TO_CHAR(SYSDATE, 'DD-MON-YYYY'),
                             v_job_emp.job_code)
                             INTO v_job_definition_id
                             FROM dual;
    SELECT job_group_id
              INTO l_job_group_id
                   FROM PER_JOB_GROUPS
                        WHERE master_flag = 'Y';
    -- Validation for job code
    BEGIN
         SELECT job_id
              INTO v_job_id
         FROM per_jobs
         WHERE name = v_job_emp.job_code;
    EXCEPTION
         WHEN NO_DATA_FOUND THEN
    FND_FILE.PUT_LINE(FND_FILE.LOG,'There is no job id Exist For this job code'||v_job_emp.job_code);
    WHEN OTHERS THEN
    FND_FILE.PUT_LINE(FND_FILE.LOG,'Error While Inserting a Record'||SQLCODE||SQLERRM);
    END;
    if v_job_id is null then
    hr_job_api.create_job
              (p_validate                => FALSE
              ,p_business_group_id      => v_business_group_id
              ,p_date_from                => SYSDATE
              ,p_job_group_id               => l_job_group_id
              ,p_segment1                => v_job_emp.job_code
              ,p_job_id                => v_job_id
              ,p_job_definition_id           => v_job_definition_id
              ,p_object_version_number      => v_object_version_number
              ,p_name                => v_name
    ELSE
    -- Validation for assignment id
         SELECT      assignment_id
              ,effective_start_date
              ,object_version_number
    INTO     l_assignment_id
              ,l_effective_date
              ,l_object_version_number
         FROM per_all_assignments_f
         WHERE person_id =
         (SELECT person_id
         FROM per_all_people_f
         WHERE employee_number = v_job_emp.empl_id);
    -- Validation for set of book id
         SELECT ho.org_information3
         INTO l_set_of_books_id
         FROM gl_sets_of_books gsb,
         hr_organization_information ho
         WHERE gsb.set_of_books_id = ho.org_information3
         AND ho.org_information_context='Operating Unit Information'
         AND ho.ORGANIZATION_ID = v_org_id;
    -- Validation for code combination id
    SELECT fnd_flex_ext.get_ccid('SQLGL',
                             'GL#',
                             50268,
                             TO_CHAR(SYSDATE,'DD-MON-YYYY'),
                             '50001.1820000281.7501.0000000000.00000.00000'
                             ) INTO l_default_code_comb_id
                             FROM dual;
    hr_assignment_api.update_emp_asg
    (p_validate => FALSE
    ,p_effective_date => sysdate
    ,p_datetrack_update_mode => 'CORRECTION'
    ,p_object_version_number => l_object_version_number
    ,p_assignment_number => NULL --l_assignment_number
         ,p_supervisor_id      => NULL
         ,p_assignment_id      => l_assignment_id
         ,p_default_code_comb_id           => l_default_code_comb_id
         ,p_set_of_books_id           => l_set_of_books_id
         ,p_title                => NULL
         ,p_ass_attribute_category     => v_business_group_id
         ,p_ass_attribute1          => v_job_emp.empl_rcd_nbr
         ,p_ass_attribute2          => v_job_emp.effective_date
         ,p_ass_attribute3          => v_job_emp.effective_sequence
         ,p_ass_attribute4          => v_job_emp.rehire_date
         ,p_ass_attribute5          => v_job_emp.probation_date
         ,p_ass_attribute6          => v_job_emp.department
         ,p_ass_attribute7          => v_job_emp.supervisor_id
         ,p_ass_attribute8          => v_job_emp.direct_manager_id
         ,p_ass_attribute9          => v_job_emp.location_code
         ,p_ass_attribute10          => v_job_emp.reason_code
         ,p_ass_attribute11          => v_job_emp.action
         ,p_ass_attribute12          => v_job_emp.salary_grade
         ,p_ass_attribute13          => v_job_emp.full_or_part_time
         ,p_ass_attribute14          => v_job_emp.hr_responsible_id
    ,p_effective_start_date => v_effective_start_date
    ,p_effective_end_date => v_effective_end_date
    ,p_no_managers_warning => v_no_managers_warning
    ,p_other_manager_warning => v_other_manager_warning
         ,p_comment_id               => V_comment_id
         ,p_soft_coding_keyflex_id     => v_soft_coding_keyflex_id
    ,p_cagr_grade_def_id => v_num
    ,p_cagr_concatenated_segments => v_seg_conc
         ,p_concatenated_segments => V_concatenated_segments
    END IF;
    DBMS_OUTPUT.PUT_LINE('Ex:'||v_job_id||','||v_object_version_number);
    END LOOP;
    COMMIT;
    EXCEPTION
         WHEN OTHERS THEN
              DBMS_OUTPUT.PUT_LINE('Error:'||SQLERRM);
    END;
    Regards
    Samarpan
    Message was edited by:
    Deekshitulu Mantha

    You are not passing the THE CORRECT out parmeters P_JOB_DEFINITION_ID,P_NAME , as looks in your calling API.
    Pass the following parameters
    P_JOB_DEFINITION_ID => l_JOB_DEFINITION_ID
    P_NAME => L_NAME
    Take a note,
    1)P_JOB_DEFINITION_ID is 'In & Out ' parameter in API's.
    If p_validate is false, uniquely identifies the Job Key flexfield combination for this job. If p_validate is true, set to null.
    2)P_NAME Out is OUT paramter in API's
    If p_validate is false, concatenation of all key flexfield segments. If p_validate is true, set to null.
    Hope it works

Maybe you are looking for

  • Complex SQL query Tuning

    Hi Fellas, I am new to query tuning. I have a big query with a TKPROF details. It is just fetching 34 records and taking approx 30 mins. The TKPROF detail will follow after the query. SELECT /*+ NO_INDEX(A, RA_CUSTOMER_TRX_N11 ) USE_NL(TYPES,A) */ a.

  • Black & White Apple Logo Lockup w/2.02

    Hello all, Eagerly updated from 2.00 to 2.02 yesterday in anticipation of never seeing the ATV locked up again with that darn Black & White Apple logo. Came back from dinner this evening, the TV was off but the ATV had been left on playing music. Tur

  • How do I convert an AI file (CC version) to the DXF-AAMA format?

    I am creating clothing and my fashion designers created the pattern in adobe illustrator.  Now the contract manufacturer wants a DXF-AAMA format, which is the  file format developed by the American Apparel Manufacturers Association in an attempt to s

  • I can't update the software on the iPad 2

    Can you help me? I can't update the software on my iPad 2. There is an error. What shall I do. Thank you!

  • IPhoto 09/ SL Crashes every time I change number of months

    I am creating a calendar and wanted to change number of months from 12 to , say 14. iPhoto crashes every time. I have of course submitted crash reports. Any workarounds apart from starting from scratch?