C++ insert into SWT cache table

I' having problems with 'insert into' sentence...
I created SWT cache group. From my c++ application I can't insert any row to this table. It doesn t report any error, the application just stops.
From ttisql I can insert it normally.
I use ttclasses.
try
conn.Insert_Promet(ID_MEDIJA, &ST_ZAPORNE_LISTE, &ST_ZAPORNE_LISTE, stat);
conn.TerminateIfRequested();
conn.Commit(stat);
catch(TTStatus st)
     cerr << "Error inserting row " << ID_MEDIJA << ":" << endl << st;
     conn.Rollback(stat);
Thanks for replay!

I think we need to see the code in your Insert_Promet method plus all other relevant code. There is undoubtedly somethinbg wrong in your code somewhere...
Chris

Similar Messages

How to insert into two differents tables at the same time

Hi
I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
and I want to insert into two differents tables at the same time using one view.
How can I do that ?
TIA
Edgar

Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
2. Create an INSTEAD OF trigger on the view.
3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
ELSE
IF :NEW.deptname IS NOT NULL THEN
UPDATE dept SET deptname = :NEW.deptname
WHERE deptno = :NEW.deptno;
END IF;
IF :NEW.empname IS NOT NULL THEN
UPDATE emp SET empname = :NEW.empname
WHERE deptno = :NEW.deptno;
Try something along those lines.
null

Inserting into a base table of a materialized view takes lot of time.......

Dear All,
I have created a materialized view which refreshes on commit.materialized view is enabled query rewrite.I have created a materialized view log on the base table also While inserting into the base table it takes lot of time................Can u please tell me why?

Dear Rahul,
Here is my materialized view..........
create materialized view mv_test on prebuilt table refresh force on commit
enable query rewrite as
SELECT P.PID,
SUM(HH_REGD) AS HH_REGD,
SUM(INPRO_WORKS) AS INPRO_WORKS,
SUM(COMP_WORKS) AS COMP_WORKS,
SUM(SKILL_WAGE) AS SKILL_WAGE,
SUM(UN_SKILL_WAGE) AS UN_SKILL_WAGE,
SUM(WAGE_ADVANCE) AS WAGE_ADVANCE,
SUM(MAT_AMT) AS MAT_AMT,
SUM(DAYS) AS DAYS,
P.INYYYYMM,P.FIN_YEAR
FROM PROG_MONTHLY P
WHERE SUBSTR(PID,5,2)<>'PP'
GROUP BY PID,P.INYYYYMM,P.FIN_YEAR;
Please help me if query enable rewrite does any performance degradation......
Thanks & Regards
Kris

Multi-table mapping is not inserting into the primary table first.

I have an inheritance mapping where the children are mapped to the parent table oids with the "Multi-Table Info" tab.
One of children is not inserting properly. Its insert is attempting to insert into one of the tables from the "Additional Tables" of "Multi-Table Info" instead of the primary table that it is mapped to.
The other children insert correctly. This child is not much different from those.
I looked through the forums, but found nothing similiar.

I would expect the Children to be inserted into both the primary table and the Additional Table? Is the object in question inserted into the primary table at all? Is the problem that it is being inserted into the Additional Table first? If it is, are the primary key names different? Is it a foreign key relationship?
If the object in question has no fields in the additional table is it mapped to the additional table? (it should not be)
Perhaps providing the deployment XML will help determine the problem,
--Gordon

How to select data from 3rd row of Excel to insert into Sql server table using ssis

Hi,
Iam having Excel files with headers in first two rows , i want two skip that two rows and select data from 3rd row to insert into Sql Server table using ssis.3rd row is having column names.

CUSTOMER DETAILS
REGION
COL1 COL2 COL3 COL4 COL5 COL6 COL7
COL8 COL9 COL10 COL11
1 XXX yyyy zzzz
2 XXX yyyy zzzzz
3 XXX yyyy zzzzz
4 XXX yyyy zzzzz
First two rows having cells merged and with headings in excel , i want two skip the first two rows and select the data from 3rd row and insert into sql server using ssis
Set range within Excel command as per below
See
http://www.joellipman.com/articles/microsoft/sql-server/ssis/646-ssis-skip-rows-in-excel-source-file.html
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Nologging direct-path insert into an indexed table

Hello,
Does anyone have an idea how I can suppress generation of undo logs for direct-path insert into an indexed table on 11.2.0.1.0:
CREATE TABLE TBL(ID NUMBER) NOLOGGING;
CREATE INDEX IDX ON TBL(ID) NOLOGGING;
INSERT /*+ APPEND */ INTO TBL SELECT /*+ APPEND */ ROWNUM FROM ...; -- Source table has 400,000,000+ rows
Regards,
Angel Tsankov

Pl do not post duplicates - Why does Oracle not use direct-path insert when instructed to do so - pl continue the discussion in your original thread

XSQL Insert into Schema based Table

Hi,
I am struggling with this one:
My test XML is well formed:
<?xml version="1.0"?>
<SC_ESP>
<ResultSet>
<ApplicationID>App0001</ApplicationID>
<Reason>Sucess</Reason>
</ResultSet>
</SC_ESP>
Whan I try to POST this XML data via the XSQL Servlet
I get the following error:
"Character '$' is not allowed in a XML tag name."
Anyone (Mark ?) know what it means ?
Thanks
Martin

Hello Mark,
I don't know which time zone you are in but thanks for the very prompt replies.
All I am trying to with this test is provide an XML input test facility via HTTP. The users are supposed to paste the XML into a TextAre using their browser and have that data inserted into the corresponding Table(s) via the XSQL servlet.
The XML schema have already been registered but I note from your other reply that I have not added the annotation xdb:storeVarrayAsTable="true" to the schema tags.
It is worth noting that the whole thing works if I create a simple table that is NOT related to an XML Shema.
You say that you have not had to use the XSQl Servlet. Would you care to say what approach you would use for the above requirement. Shall I set about writing my own Servlet to do this.

How to execute a Java method when row inserted into a database table?

I have the need to fire off a java method when a row is inserted into a database table. I am unfortunately working with MySQL which just recently supported triggers but these new triggers can not execute a Java application on any event.
What I am looking for is an event driven approach such that when a row is inserted into a specific table I can fire off a java method (sitting in a tomcat container) that will take the contents and send it to a web service.
It has been mentioned that JMS may have the ability to poll and monitor a database table. Just wondering if anyone could point me in the right direction.
thanks
JavaTek

A service handler might be the right way to run some code at the end of a service call (another way would be to make use of filters).
First, make sure your static table is merged with ServiceHandlers.
Secondary, change your custom method name into one that is not already in the service definition of COLLECTION_COPY_LOT (preferably a unique method name like collectionCopyLotLastAction that describes its purpose) and remove the following line from your code:
m_service.doCodeEx("",this);Now create a service definition for COLLECTION_COPY_LOT in your custom component based on the original COLLECTION_COPY_LOT (copy paste from the original service definition) and add you own method collectionCopyLotLastAction as the last step in the service. Play with the load order to make sure CS is using your service definition of COLLECTION_COPY_LOT instead of the original.
regards,
Fabian

Inserts into Global Temporary Table

I'm working on using a global temporary table in one of my apps. I have a small test run here to isolate the problem. It simply creates the global temporary table, inserts a row, commits and then does a select to see if the insert worked. No data shows in the table when running this. I don't know much about global temp tables, so any help would be appreciated.
CREATE GLOBAL TEMPORARY TABLE AGENT_SILO.AS_TEMP_VALIDATE (
SBI_EMPLOYEE_ID NUMBER,
CURRENT_FLAG char(1),
EFFECTIVE_START date,
EFFECTIVE_END date
) ON COMMIT DELETE ROWS;
INSERT INTO AGENT_SILO.AS_TEMP_VALIDATE(SBI_EMPLOYEE_ID, CURRENT_FLAG, EFFECTIVE_START, EFFECTIVE_END)
VALUES(0, '', SYSDATE, SYSDATE);
commit;
SELECT * FROM AGENT_SILO.AS_TEMP_VALIDATE;

So I wonder what else I'm doing wrong that's really obvious. Here's what i'm trying to accomplish and maybe there's a better way of going about it.
I have a trigger that is supposed to do some validation before the insert is allowed to go through. So here's my approach. I have a trigger fired when there's an insert into the AS_Employee_history table. This passes some of the fields from this insert into a proc (the id, a flag and a couple of dates). Within the proc, i create a global temp table, insert these passed values into the temp table. Then I have a cursor to basically copy the rows from the as_employee_history table that have the same id. Then I can do some selects on the temp table to see if it passes the validation.
I have outputs throughout for debugging and it gets to right after the inserts into the temp table, then the rest of the code doesn't appear to be executed. So it looks like it's failing at the execution of select statements on the temp table. Anything else obvious that I"m missing here?
Here's my proc.
PROCEDURE "PAS_VALIDATE" (STATUS OUT VARCHAR2, v_status OUT BOOLEAN, NEW_SBI_EMPLOYEE_ID IN NUMBER,
NEW_CURRENT_FLAG IN CHAR, NEW_EFFECTIVE_START IN DATE,
NEW_EFFECTIVE_END IN DATE)
IS
v_prev_effective_end date;
v_flag_count number;
v_flag_count_date number;
--variables to store dynamic sql returns
v_sql_flag_count_date varchar2(255);
v_sql_flag_count varchar2(255);
v_sql_prev_eff_end varchar2(255);
cursor c_row is
select * from AGENT_SILO.AS_EMPLOYEE_HISTORY EMP
where (EMP.SBI_EMPLOYEE_ID = NEW_SBI_EMPLOYEE_ID);
r_row c_row%ROWTYPE;
BEGIN
Status := 'Started';
v_status := true;
DBMS_OUTPUT.PUT_LINE('Creating temporary table...');
execute immediate 'CREATE GLOBAL TEMPORARY TABLE AGENT_SILO.AS_TEMP_VALIDATE (
SBI_EMPLOYEE_ID NUMBER,
CURRENT_FLAG char(1),
EFFECTIVE_START date,
EFFECTIVE_END date
) ON COMMIT PRESERVE ROWS';
     DBMS_OUTPUT.PUT_LINE('Validating the data...');
     --DBMS_OUTPUT.PUT_LINE('Inserting submitted row into temp table');
--Insert the new row being submitted from user into the temp table
execute immediate 'INSERT INTO AGENT_SILO.AS_TEMP_VALIDATE(SBI_EMPLOYEE_ID, CURRENT_FLAG, EFFECTIVE_START, EFFECTIVE_END)
VALUES(' || NEW_SBI_EMPLOYEE_ID || ',
''' || NEW_CURRENT_FLAG || ''',
to_date(''' || to_char(NEW_EFFECTIVE_START, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''),
to_date(''' || to_char(NEW_EFFECTIVE_END, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''))';
--Insert the other rows to we end up with a subset of the employee history table
--with only rows that match the sbi_employee_id of the submitted row
     --DBMS_OUTPUT.PUT_LINE('Inserting into temp table...');
open c_row;
loop
fetch c_row into r_row;
exit when c_row%NOTFOUND;
execute immediate 'INSERT INTO AGENT_SILO.AS_TEMP_VALIDATE(SBI_EMPLOYEE_ID, CURRENT_FLAG, EFFECTIVE_START, EFFECTIVE_END)
VALUES(' || r_row.SBI_EMPLOYEE_ID || ',
''' || r_row.CURRENT_FLAG || ''',
to_date(''' || to_char(r_row.EFFECTIVE_START, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''),
to_date(''' || to_char(r_row.EFFECTIVE_END, 'mm/dd/yyyy hh:mi:ss') || ''', ''mm/dd/yyyy hh:mi:ss''))';
end loop;
close c_row;
DBMS_OUTPUT.PUT_LINE('After inserts');
-----Store queries to determine values for validation--------------------------
v_sql_prev_eff_end := 'SELECT to_char(max(effective_end), ''dd-mon-yy'')
FROM AGENT_SILO.AS_TEMP_VALIDATE
where to_char(EFFECTIVE_END, ''dd-mon-yy'') != ''31-dec-99'' AND
SBI_EMPLOYEE_ID = NEW_SBI_EMPLOYEE_ID';
--Find the largest effective_end, besides the 9999 value
execute immediate v_sql_prev_eff_end into v_prev_effective_end;
DBMS_OUTPUT.PUT_LINE('The highest previous end date: ' || v_prev_effective_end);
--...........Validation testing...........
execute immediate 'DROP TABLE AGENT_SILO.AS_TEMP_VALIDATE'; --Drop temp table
DBMS_OUTPUT.PUT_LINE('Validation Procedure Complete');
COMMIT;
status:='Success';
EXCEPTION
When Others Then
ROLLBACK;
Status := SQLERRM;
END;
Thanks a bunch for helping a noob out.

Need to increase performance-bulk collect in cursor with limit and in the for loop inserting into the trigger table

Hi all,
I have a performance issue in the below code,where i am trying to insert the data from table_stg into target_tab and in parent_tab tables and then to child tables via cursor with bulk collect .the target_tab and parent_tab are huge tables and have a row wise trigger enabled on it .the trigger is mandatory . This timetaken for this block to execute is 5000 seconds.Now my requirement is to reduce it to 5 to 10 mins.
can someone please guide me here.Its bit urgent .Awaiting for your response.
declare
vmax_Value NUMBER(5);
vcnt number(10);
id_val number(20);
pc_id number(15);
vtable_nm VARCHAR2(100);
vstep_no VARCHAR2(10);
vsql_code VARCHAR2(10);
vsql_errm varchar2(200);
vtarget_starttime timestamp;
limit_in number :=10000;
idx           number(10);
          cursor stg_cursor is
         select
               DESCRIPTION,
               SORT_CODE,
               ACCOUNT_NUMBER,
                 to_number(to_char(CORRESPONDENCE_DATE,'DD')) crr_day,
                 to_char(CORRESPONDENCE_DATE,'MONTH') crr_month,
                 to_number(substr(to_char(CORRESPONDENCE_DATE,'DD-MON-YYYY'),8,4)) crr_year,
               PARTY_ID,
               GUID,
               PAPERLESS_REF_IND,
               PRODUCT_TYPE,
               PRODUCT_BRAND,
               PRODUCT_HELD_ID,
               NOTIFICATION_PREF,
               UNREAD_CORRES_PERIOD,
               EMAIL_ID,
               MOBILE_NUMBER,
               TITLE,
               SURNAME,
               POSTCODE,
               EVENT_TYPE,
               PRIORITY_IND,
               SUBJECT,
               EXT_PRD_ID_TX,
               EXT_PRD_HLD_ID_TX,
               EXT_SYS_ID,
               EXT_PTY_ID_TX,
               ACCOUNT_TYPE_CD,
               COM_PFR_TYP_TX,
               COM_PFR_OPT_TX,
               COM_PFR_RSN_CD
         from table_stg;
type rec_type is table of stg_rec_type index by pls_integer;
v_rt_all_cols rec_type;
BEGIN
vstep_no   := '0';
vmax_value := 0;
vtarget_starttime := systimestamp;
id_val    := 0;
pc_id     := 0;
success_flag := 0;
          vstep_no := '1';
          vtable_nm := 'before cursor';
    OPEN stg_cursor;
          vstep_no := '2';
          vtable_nm := 'After cursor';
   LOOP
          vstep_no := '3';
          vtable_nm := 'before fetch';
--loop
    FETCH stg_cursor BULK COLLECT INTO v_rt_all_cols LIMIT limit_in;
              vstep_no := '4';
              vtable_nm := 'after fetch';
--EXIT WHEN v_rt_all_cols.COUNT = 0;
    EXIT WHEN stg_cursor%NOTFOUND;
FOR i IN 1 .. v_rt_all_cols.COUNT
LOOP
   dbms_output.put_line(upper(v_rt_all_cols(i).event_type));
    if (upper(v_rt_all_cols(i).event_type) = upper('System_enforced')) then
              vstep_no := '4.1';
              vtable_nm := 'before seq sel';
          select PC_SEQ.nextval into pc_id from dual;
              vstep_no := '4.2';
              vtable_nm := 'before insert corres';
          INSERT INTO target1_tab
                       (ID,
                        PARTY_ID,
                        PRODUCT_BRAND,
                        SORT_CODE,
                        ACCOUNT_NUMBER,
                        EXT_PRD_ID_TX,
                        EXT_PRD_HLD_ID_TX,
                        EXT_SYS_ID,
                        EXT_PTY_ID_TX,
                        ACCOUNT_TYPE_CD,
                        COM_PFR_TYP_TX,
                        COM_PFR_OPT_TX,
                        COM_PFR_RSN_CD,
                        status)
         VALUES
                        (pc_id,
                         v_rt_all_cols(i).party_id,
                         decode(v_rt_all_cols(i).product_brand,'LTB',2,'HLX',1,'HAL',1,'BOS',3,'VER',4,0),
                         v_rt_all_cols(i).sort_code,
                         'XXXX'||substr(trim(v_rt_all_cols(i).ACCOUNT_NUMBER),length(trim(v_rt_all_cols(i).ACCOUNT_NUMBER))-3,4),
                         v_rt_all_cols(i).EXT_PRD_ID_TX,
                         v_rt_all_cols(i).EXT_PRD_HLD_ID_TX,
                         v_rt_all_cols(i).EXT_SYS_ID,
                         v_rt_all_cols(i).EXT_PTY_ID_TX,
                         v_rt_all_cols(i).ACCOUNT_TYPE_CD,
                         v_rt_all_cols(i).COM_PFR_TYP_TX,
                         v_rt_all_cols(i).COM_PFR_OPT_TX,
                         v_rt_all_cols(i).COM_PFR_RSN_CD,
                         NULL);
              vstep_no := '4.3';
              vtable_nm := 'after insert corres';
    else
          select COM_SEQ.nextval into id_val from dual;
              vstep_no := '6';
              vtable_nm := 'before insertcomm';
      if (upper(v_rt_all_cols(i).event_type) = upper('REMINDER')) then
            vstep_no := '6.01';
              vtable_nm := 'after if insertcomm';
          insert into parent_tab
             (ID ,
             CTEM_CODE,
             CHA_CODE,
             CT_CODE,
             CONTACT_POINT_ID,
             SOURCE,
             RECEIVED_DATE,
             SEND_DATE,
             RETRY_COUNT)
          values
             (id_val,
              lower(v_rt_all_cols(i).event_type),
              decode(v_rt_all_cols(i).product_brand,'LTB',2,'HLX',1,'HAL',1,'BOS',3,'VER',4,0),
              'Email',
              v_rt_all_cols(i).email_id,
              'IADAREMINDER',
              systimestamp,
              systimestamp,
              0);
     else
            vstep_no := '6.02';
              vtable_nm := 'after else insertcomm';
          insert into parent_tab
             (ID ,
             CTEM_CODE,
             CHA_CODE,
             CT_CODE,
             CONTACT_POINT_ID,
             SOURCE,
             RECEIVED_DATE,
             SEND_DATE,
             RETRY_COUNT)
          values
             (id_val,
              lower(v_rt_all_cols(i).event_type),
              decode(v_rt_all_cols(i).product_brand,'LTB',2,'HLX',1,'HAL',1,'BOS',3,'VER',4,0),
              'Email',
              v_rt_all_cols(i).email_id,
              'CORRESPONDENCE',
              systimestamp,
              systimestamp,
              0);
        END if;
              vstep_no := '6.11';
              vtable_nm := 'before chop';
         if (v_rt_all_cols(i).ACCOUNT_NUMBER is not null) then
                  v_rt_all_cols(i).ACCOUNT_NUMBER := 'XXXX'||substr(trim(v_rt_all_cols(i).ACCOUNT_NUMBER),length(trim(v_rt_all_cols(i).ACCOUNT_NUMBER))-3,4);
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
          values
            (id_val,
             'IB.Correspondence.AccountNumberMasked',
             v_rt_all_cols(i).ACCOUNT_NUMBER);
         end if;
              vstep_no := '6.1';
              vtable_nm := 'before stateday';
         if (v_rt_all_cols(i).crr_day is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
          values
            (id_val,
             --'IB.Correspondence.Date.Day',
             'IB.Crsp.Date.Day',
             v_rt_all_cols(i).crr_day);
         end if;
              vstep_no := '6.2';
              vtable_nm := 'before statemth';
         if (v_rt_all_cols(i).crr_month is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
          values
            (id_val,
             --'IB.Correspondence.Date.Month',
             'IB.Crsp.Date.Month',
             v_rt_all_cols(i).crr_month);
         end if;
              vstep_no := '6.3';
              vtable_nm := 'before stateyear';
         if (v_rt_all_cols(i).crr_year is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
          values
            (id_val,
             --'IB.Correspondence.Date.Year',
             'IB.Crsp.Date.Year',
             v_rt_all_cols(i).crr_year);
         end if;
              vstep_no := '7';
              vtable_nm := 'before type';
           if (v_rt_all_cols(i).product_type is not null) then
              insert into child_tab
                 (COM_ID,
                 KEY,
                 VALUE)
              values
                (id_val,
                 'IB.Product.ProductName',
               v_rt_all_cols(i).product_type);
            end if;
              vstep_no := '9';
              vtable_nm := 'before title';
          if (trim(v_rt_all_cols(i).title) is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE )
          values
            (id_val,
             'IB.Customer.Title',
             trim(v_rt_all_cols(i).title));
          end if;
              vstep_no := '10';
              vtable_nm := 'before surname';
          if (v_rt_all_cols(i).surname is not null) then
            insert into child_tab
               (COM_ID,
               KEY,
               VALUE)
            values
              (id_val,
              'IB.Customer.LastName',
              v_rt_all_cols(i).surname);
          end if;
                        vstep_no := '12';
                        vtable_nm := 'before postcd';
          if (trim(v_rt_all_cols(i).POSTCODE) is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
           values
            (id_val,
             'IB.Customer.Addr.PostCodeMasked',
              substr(replace(v_rt_all_cols(i).POSTCODE,' ',''),length(replace(v_rt_all_cols(i).POSTCODE,' ',''))-2,3));
          end if;
                        vstep_no := '13';
                        vtable_nm := 'before subject';
          if (trim(v_rt_all_cols(i).SUBJECT) is not null) then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
           values
            (id_val,
             'IB.Correspondence.Subject',
              v_rt_all_cols(i).subject);
          end if;
                        vstep_no := '14';
                        vtable_nm := 'before inactivity';
          if (trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) is null or
              trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) = '3' or
              trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) = '6' or
              trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) = '9') then
          insert into child_tab
             (COM_ID,
             KEY,
             VALUE)
           values
            (id_val,
             'IB.Correspondence.Inactivity',
              v_rt_all_cols(i).UNREAD_CORRES_PERIOD);
          end if;
                      vstep_no := '14.1';
                      vtable_nm := 'after notfound';
    end if;
                      vstep_no := '15';
                      vtable_nm := 'after notfound';
    END LOOP;
    end loop;
                      vstep_no := '16';
                      vtable_nm := 'before closecur';
    CLOSE stg_cursor;
                      vstep_no := '17';
                      vtable_nm := 'before commit';
    DELETE FROM table_stg;
COMMIT;
                      vstep_no := '18';
                      vtable_nm := 'after commit';
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
success_flag := 1;
vsql_code := SQLCODE;
vsql_errm := SUBSTR(sqlerrm,1,200);
error_logging_pkg.inserterrorlog('samp',vsql_code,vsql_errm, vtable_nm,vstep_no);
RAISE_APPLICATION_ERROR (-20011, 'samp '||vstep_no||' SQLERRM:'||SQLERRM);
end;
Thanks

Its bit urgent
NO - it is NOT urgent. Not to us.
If you have an urgent problem you need to hire a consultant.
I have a performance issue in the below code,
Maybe you do and maybe you don't. How are we to really know? You haven't posted ANYTHING indicating that a performance issue exists. Please read the FAQ for how to post a tuning request and the info you need to provide. First and foremost you have to post SOMETHING that actually shows that a performance issue exists. Troubleshooting requires FACTS not just a subjective opinion.
where i am trying to insert the data from table_stg into target_tab and in parent_tab tables and then to child tables via cursor with bulk collect .the target_tab and parent_tab are huge tables and have a row wise trigger enabled on it .the trigger is mandatory . This timetaken for this block to execute is 5000 seconds.Now my requirement is to reduce it to 5 to 10 mins.
Personally I think 5000 seconds (about 1 hr 20 minutes) is very fast for processing 800 trillion rows of data into parent and child tables. Why do you think that is slow?
Your code has several major flaws that need to be corrected before you can even determine what, if anything, needs to be tuned.
This code has the EXIT statement at the beginning of the loop instead of at the end
    FETCH stg_cursor BULK COLLECT INTO v_rt_all_cols LIMIT limit_in;
              vstep_no := '4';
              vtable_nm := 'after fetch';
--EXIT WHEN v_rt_all_cols.COUNT = 0;
    EXIT WHEN stg_cursor%NOTFOUND;
The correct place for the %NOTFOUND test when using BULK COLLECT is at the END of the loop; that is, the last statement in the loop.
You can use a COUNT test at the start of the loop but ironically you have commented it out and have now done it wrong. Either move the NOTFOUND test to the end of the loop or remove it and uncomment the COUNT test.
WHEN OTHERS THEN
ROLLBACK;
That basically says you don't even care what problem occurs or whether the problem is for a single record of your 10,000 in the collection. You pretty much just throw away any stack trace and substitute your own message.
Your code also has NO exception handling for any of the individual steps or blocks of code.
The code you posted also begs the question of why you are using NAME=VALUE pairs for child data rows? Why aren't you using a standard relational table for this data?
As others have noted you are using slow-by-slow (row by row processing). Let's assume that PL/SQL, the bulk collect and row-by-row is actually necessary.
Then you should be constructing the parent and child records into collections and then inserting them in BULK using FORALL.
1. Create a collection for the new parent rows
2. Create a collection for the new child rows
3. For each set of LIMIT source row data
a. empty the parent and child collections
b. populate those collections with new parent/child data
c. bulk insert the parent collection into the parent table
d. bulk insert the child collection into the child table
And unless you really want to either load EVERYTHING or abandon everything you should use bulk exception handling so that the clean data gets processed and only the dirty data gets rejected.

RE:ora-28500 when trying to insert into SQL Server table

Hi all!
I'm getting this when i attempt to insert into my table test in a SQL Server database. As u can see from the select, the database link seems ok. Any ideas plz. Thnx..
SQL> select "idAges" from test@try2;
no rows selected
SQL> insert into test@try2 ("idAges","nARAges","nAPAges") values(10,'','');
insert into test@try2 ("idAges","nARAges","nAPAges") values(10,'','')
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC SQL Server Driver][SQL
Server]Cannot insert explicit value for identity column in table 'test' when
IDENTITY_INSERT is set to OFF. (SQL State: 23000; SQL Code: 544)
ORA-02063: preceding 2 lines from TRY2

IDENTITY_INSERT on works only for particular session and for one table. It's not global variable.
The only idea what I have is to create link from MS Sql to Oracle (right now You have oracle ->ms sql)and then before insert You will set identity_insert on and will run insert.

How can I INSERT INTO from Staging Table to Production Table

I’ve got a Bulk Load process which works fine, but I’m having major problems downstream.
Almost everything is Varchar(100), and this works fine.
Except for these fields:
INDEX SHARES, INDEX MARKET CAP, INDEX WEIGHT, DAILY PRICE RETURN, and DAILY TOTAL RETURN
These four fields must be some kind of numeric, because I need to perform sums on these guys.
Here’s my SQL:
CREATE
TABLE [dbo].[S&P_Global_BMI_(US_Dollar)]
[CHANGE]
VARCHAR(100),
[EFFECTIVE DATE]
VARCHAR(100),
[COMPANY]
VARCHAR(100),
[RIC]
VARCHAR(100),
Etc.
[INDEX SHARES]
NUMERIC(18, 12),
[INDEX MARKET CAP]
NUMERIC(18, 12),
[INDEX WEIGHT]
NUMERIC(18, 12),
[DAILY PRICE RETURN]
NUMERIC(18, 12),
[DAILY TOTAL RETURN]
NUMERIC(18, 12),
From the main staging table, I’m writing data to 4 production tables.
CREATE
TABLE [dbo].[S&P_Global_Ex-U.S._LargeMidCap_(US_Dollar)]
[CHANGE]
VARCHAR(100),
[EFFECTIVE DATE]
VARCHAR(100),
[COMPANY]
VARCHAR(100),
[RIC]
VARCHAR(100),
Etc.
[INDEX SHARES]
FLOAT(20),
[INDEX MARKET CAP]
FLOAT(20),
[INDEX WEIGHT] FLOAT(20),
[DAILY PRICE RETURN]
FLOAT(20),
[DAILY TOTAL RETURN]
FLOAT(20),,
INSERT
INTO [dbo].[S&P_Global_Ex-U.S._LargeMidCap_(US_Dollar)]
SELECT
[CHANGE],
Etc.
[DAILY TOTAL RETURN]
FROM
[dbo].[S&P_Global_BMI_(US_Dollar)]
WHERE
isnumeric([Effective Date])
= 1
AND
[CHANGE] is
null
AND
[COUNTRY] <>
'US'
AND ([SIZE] =
'L' OR [SIZE]
= 'M')
The Bulk Load is throwing errors like this (unless I make everything Varchar):
Bulk load data conversion error (truncation) for row 7, column 23 (INDEX SHARES).
Msg 4863, Level 16, State 1, Line 1
When I try to load data from the staging table to the production table, I get this.
Msg 8115, Level 16, State 8, Line 1
Arithmetic overflow error converting varchar to data type numeric.
The statement has been terminated.
There must be an easy way to overcome this, right.
Please advise!
Thanks!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Nothing is returned. Everything is VARCHAR(100). the problem is this.
If I use FLOAT(18) or REAL, I get exponential numbers, which is useless to me.
If I use DECIMAL(18,12) or NUMERIC(18,12), I get errors.
Msg 4863, Level 16, State 1, Line 41
Bulk load data conversion error (truncation) for row 7, column 23 (INDEX SHARES).
Msg 4863, Level 16, State 1, Line 41
Bulk load data conversion error (truncation) for row 8, column 23 (INDEX SHARES).
Msg 4863, Level 16, State 1, Line 41
Bulk load data conversion error (truncation) for row 9, column 23 (INDEX SHARES).
There must be some data type that fits this!
Here's a sample of what I'm dealing with.
-0.900900901
9.302325581
-2.648171501
-1.402805723
-2.911830584
-2.220960866
2.897762349
-0.219640074
-5.458448607
-0.076626094
6.710940231
0.287200186
0.131682908
0.124276221
0.790818723
0.420505119
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Read a csv file, fill a dynamic table and insert into a standard table

Hi everybody,
I have a problem here and I need your help:
I have to read a csv file and insert the data of it into a standard table.
1 - On the parameter scrreen I have to indicate the standard table and the csv file.
2 - I need to create a dynamic table. The same type of the one I choose at parameter screen.
3 - Then I need to read the csv and put the data into this dynamic table.
4 - Later I need to insert the data from the dynamic table into the standard table (the one on the parameter screen).
How do I do this job? Do you have an example? Thanks.

Here is an example table which shows how to upload a csv file from the frontend to a dynamic internal table. You can of course modify this to update your database table.
report zrich_0002.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
               <dyn_wa>,
               <dyn_field>.
data: it_fldcat type lvc_t_fcat,
      wa_it_fldcat type lvc_s_fcat.
type-pools : abap.
data: new_table type ref to data,
      new_line type ref to data.
data: xcel type table of alsmex_tabline with header line.
selection-screen begin of block b1 with frame title text .
parameters: p_file type rlgrap-filename default 'c:Test.csv'.
parameters: p_flds type i.
selection-screen end of block b1.
start-of-selection.
* Add X number of fields to the dynamic itab cataelog
do p_flds times.
    clear wa_it_fldcat.
    wa_it_fldcat-fieldname = sy-index.
    wa_it_fldcat-datatype = 'C'.
    wa_it_fldcat-inttype = 'C'.
    wa_it_fldcat-intlen = 10.
    append wa_it_fldcat to it_fldcat .
enddo.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
               exporting
                  it_fieldcatalog = it_fldcat
               importing
                  ep_table        = new_table.
assign new_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
* Upload the excel
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       exporting
            filename                = p_file
            i_begin_col             = '1'
            i_begin_row             = '1'
            i_end_col               = '200'
            i_end_row               = '5000'
       tables
            intern                  = xcel
       exceptions
            inconsistent_parameters = 1
            upload_ole              = 2
            others                  = 3.
* Reformt to dynamic internal table
loop at xcel.
    assign component xcel-col of structure <dyn_wa> to <dyn_field>.
    if sy-subrc = 0.
     <dyn_field> = xcel-value.
    endif.
    at end of row.
      append <dyn_wa> to <dyn_table>.
      clear <dyn_wa>.
    endat.
endloop.
* Write out data from table.
loop at <dyn_table> into <dyn_wa>.
    do.
      assign component sy-index of structure <dyn_wa> to <dyn_field>.
      if sy-subrc <> 0.
        exit.
      endif.
      if sy-index = 1.
        write:/ <dyn_field>.
      else.
        write: <dyn_field>.
      endif.
    enddo.
endloop.
REgards,
RIch Heilman

Urgent:-Values are not inserted into the custom table

Hi, I am inserting the data from the custom OAF form into a custom table. Only the WHO columns are populated into the table but no field value is populated into the custom table. I have written the following code -
In CO
if (pageContext.getParameter("Continue") != null)
OAApplicationModule am = pageContext.getRootApplicationModule();
OAViewObject CwkInfo = (OAViewObject)am.findViewObject("CWKInfoVO1");
am.invokeMethod("initializevo");
in AM
public void initializevo()
CWKInfoVOImpl testVo = (CWKInfoVOImpl) this.getCWKInfoVO1();
testVo.insertRow(testVo.createRow());
getTransaction().commit();
Urgent Help is required.
Regards,
Ashish

Hi Ashish,
Double check whether you have attached the correct EO based VO attribute to the columns.
In the Controller
Process Request use the following code:-
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (!pageContext.isFormSubmission())
am.invokeMethod("initQuery", null);
ProcessForm Request
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
System.out.println("Inside Process Form Request");
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("submitButton")!=null)
am.invokeMethod("submit")
AM Code
public void initQuery()
OAViewObject vvo = (OAViewObject)getEmployeeEOVO1();//Give you EO based VO Name
if (!vvo.isPreparedForExecution())
vvo.executeQuery();
Row row = vvo.createRow();
vvo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
public void submit()
getTransaction().commit();
Import necessage classes.
Thanks
--Anil

Trigger on Insert into a custom table from external application

This is the problem I am facing.
External Application using a different schema lets say extdb on a different server. This writes into a table in a schema called appscustom schema. Appscustom schema is under Oracle Apps.
A trigger in Oracle Apps to be executed on insert into the appscustom schema table.
This trigger inturn will run a concurrent job to create the invoice and gl interface tables.
THe problem I am facing is, The trigger get executed but the concurrent job does not get triggered/run.
Here is the trigger. Let me know, what might be wrong.
THe values for vRESP_APPL_Id,vRESP_ID, vUSER_ID becomes null in the test_pims table.
Whereas when I manually insert from backend into appscustom schema table the concurrent job gets submitted.
~~~~~~~~~~~~~~~~~~~~~~~~~~
-- Start of DDL Script for Trigger APPS.RWJF_PIMS_ORACLE_INT
-- Generated 5/25/2005 22:10:52 from APPS@HENRY_DEVL
CREATE OR REPLACE TRIGGER rwjf_pims_oracle_int
AFTER
INSERT
ON rwjf_pimstxnbatch
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
WHEN (new.status = 'U' )
Declare
ReturnCode BOOLEAN;
ConcReqID NUMBER := 0;
vRESP_APPL_ID NUMBER;
vRESP_ID NUMBER;
vUSER_ID NUMBER;
LoadToAp NUMBER :=0;
LoadToGl NUMBER :=0;
Begin
-- vRESP_APPL_ID := apps.fnd_profile.value(200); -- AP --('RESP_APPL_ID');
-- vRESP_ID := apps.fnd_profile.value(20639); -- 20639 for payables mgr. for rwjf_payables Mgr (50001); --('RESP_ID');
-- vUSER_ID := apps.fnd_profile.value(1247); -- 1247 for sury 1065 for interface -- ('USER_ID');
LoadToAp := 0;
SELECT COUNT(*)
INTO LoadToAp
FROM rwjf.RWJF_PimsTxnBatchDtl
WHERE GL_OR_AP = 'A'
AND pims_txn_batch_id = :NEW.Pims_Txn_Batch_id;
LoadToGl := 0;
SELECT COUNT(*)
INTO LoadToGl
FROM rwjf.RWJF_PimsTxnBatchDtl
WHERE GL_OR_AP = 'G'
AND pims_txn_batch_id = :NEW.Pims_Txn_Batch_id;
IF LoadToAp > 0 THEN
vRESP_APPL_ID := 200; -- Application Id 200 Account payables
vRESP_ID := 50001; -- RWJF_Payables Mgr for user interface
vUSER_ID := 1065; -- user id for user name interface
apps.fnd_global.apps_initialize(vUSER_ID,vRESP_ID,vRESP_APPL_ID);
ConcReqID := 0;
ReturnCode := FND_REQUEST.SET_MODE(TRUE);
ConcReqID := FND_REQUEST.SUBMIT_REQUEST('RWJF',
'RWJF_PIMS_INT',
'', '', FALSE,
:NEW.Pims_Txn_Batch_id,'AP', chr(0),
END IF;
IF LoadToGl > 0 THEN
vRESP_APPL_ID := 20003;
vRESP_ID := 50003;
vUSER_ID := 1065;
apps.fnd_global.apps_initialize(vUSER_ID,vRESP_ID,vRESP_APPL_ID);
ConcReqID := 0;
ReturnCode := FND_REQUEST.SET_MODE(TRUE);
ConcReqID := FND_REQUEST.SUBMIT_REQUEST('RWJF',
'RWJF_PIMS_INT',
'', '', FALSE,
:NEW.Pims_Txn_Batch_id,'GL',chr(0),
END IF;
insert into test_pims
values
('Test3',:New.Pims_Txn_Batch_id,vUSER_ID,vRESP_ID,vRESP_APPL_ID);
insert into test_pims
values
('Test3',ConcReqID,vUSER_ID,vRESP_ID,vRESP_APPL_ID);
IF ConcReqID = 0 THEN
DBMS_OUTPUT.PUT_LINE('Problem Submitting Program to get pims txn batch'); /* Handle Error */
END IF;
End;
-- End of DDL Script for Trigger APPS.RWJF_PIMS_ORACLE_INT

don't quite understand the structure of your tables but it sounds similiar to a merge statement.
(contiditonally insert, update records depending on whether or not corresponding records exist)
create table custom_table
(cust_no number,
line_no number,
party_id number
create table hz_parties
as (
select 1 party_id, 'A' bill_to_location, 10 cust_no, 100 line_no from dual union
select 2, 'B', 20, 200 from dual union
select 3, 'C', 30, 300 from dual union
select 4, 'D', 40, 400 from dual
merge into custom_table t1
using (select * from hz_parties) t2
on (t1.party_id = t2.party_id)
when not matched then insert (t1.cust_no, t1.line_no, t1.party_id)
values (t2.cust_no, t2.line_no, t2.party_id);
Edited by: pollywog on Mar 5, 2010 6:52 AM

C++ insert into SWT cache table

Similar Messages

Maybe you are looking for