Multi-table mapping is not inserting into the primary table first.

I have an inheritance mapping where the children are mapped to the parent table oids with the "Multi-Table Info" tab.
One of children is not inserting properly. Its insert is attempting to insert into one of the tables from the "Additional Tables" of "Multi-Table Info" instead of the primary table that it is mapped to.
The other children insert correctly. This child is not much different from those.
I looked through the forums, but found nothing similiar.

I would expect the Children to be inserted into both the primary table and the Additional Table? Is the object in question inserted into the primary table at all? Is the problem that it is being inserted into the Additional Table first? If it is, are the primary key names different? Is it a foreign key relationship?
If the object in question has no fields in the additional table is it mapped to the additional table? (it should not be)
Perhaps providing the deployment XML will help determine the problem,
--Gordon                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • Urgent:-Values are not inserted into the custom table

    Hi, I am inserting the data from the custom OAF form into a custom table. Only the WHO columns are populated into the table but no field value is populated into the custom table. I have written the following code -
    In CO
    if (pageContext.getParameter("Continue") != null)
    OAApplicationModule am = pageContext.getRootApplicationModule();
    OAViewObject CwkInfo = (OAViewObject)am.findViewObject("CWKInfoVO1");
    am.invokeMethod("initializevo");
    in AM
    public void initializevo()
    CWKInfoVOImpl testVo = (CWKInfoVOImpl) this.getCWKInfoVO1();
    testVo.insertRow(testVo.createRow());
    getTransaction().commit();
    Urgent Help is required.
    Regards,
    Ashish

    Hi Ashish,
    Double check whether you have attached the correct EO based VO attribute to the columns.
    In the Controller
    Process Request use the following code:-
    public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    if (!pageContext.isFormSubmission())
    am.invokeMethod("initQuery", null);
    ProcessForm Request
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    System.out.println("Inside Process Form Request");
    super.processFormRequest(pageContext, webBean);
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    if (pageContext.getParameter("submitButton")!=null)
    am.invokeMethod("submit")
    AM Code
    public void initQuery()
    OAViewObject vvo = (OAViewObject)getEmployeeEOVO1();//Give you EO based VO Name
    if (!vvo.isPreparedForExecution())
    vvo.executeQuery();
    Row row = vvo.createRow();
    vvo.insertRow(row);
    row.setNewRowState(Row.STATUS_INITIALIZED);
    public void submit()
    getTransaction().commit();
    Import necessage classes.
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Record not inserting into the table through Forms 10g

    Hi all,
    I have created a form in 10g(10.1.2.0.2) based on just one table that has 4 columns(col1, col2, col3, col4).
    Here col1, col2 and col3 are VARCHAR2 and col4 is date and all the columns are not null columns(There are no primary and foriegn key constrains, which means duplicates are allowed).
    My form contains 2 blocks where block 1 has one text item (col1) and 3 buttons (Delete, Save, Exit).
    And block2 is a database block and has col2,col3,col4 which are in tabluar layout frame displaying 10 records.
    When the form is opened the cursor has to be in block1.col1 for querrying. Here i enter a value in col1, and then when I click on col2 in the block2, then I put execute_query in new_block_instance of block2, which displays the records.
    The block2 properties are not updatable, insertable and query is allowed.
    Everything is working good until here. But here in the block2 when I want to insert another record into the table, by navigating all the way down to the last empty record and entering the new values for col2, col3 and col4 And then Ctrl+S will display the message "*FRM-40400: Transaction complete: 1 record applied and saved.*" But actually the record is not inserted into the table.
    I also disabled the col4 by setting the Enabled property to No, since while inserting new record the date have to be populated into it and it shouldnt be changed by the user. And im populating the sysdate into the new record by setting Intial Value property to *$$DATE$$*.
    And another requirement which I could not work arround here is that, the col3 also should be populated with the username of the user while inserting.
    please help me...

    Hi Sarah,
    I do not want to update the existing record. So I kept Udate Allowed to No in property palette for the items in block2.
    Do I have to do this property at block level also?
    I'm inserting a new record here.
    Edited by: Charan on Sep 19, 2011 8:48 AM

  • Created a trigger but new values are not inserting in the backup table

    I have created a backup table and writter a trigger on a table such that after update old values and new values are to be inserted into the backup table, but new values are not inserting. I am giving the code please help me
    create or replace trigger "SUPPQUOTES_AUDIT"
    after update or delete on phsuppquotes for each row
    begin
    insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values
    (:new.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
    end;

    old values and new
    values are to be inserted into the backup table, butwell you have only one insert there, inserting old values with a new id (which is ok if you don't update the id column, but I don't think that :new is available for deleting ops); you should have two inserts:
    insert into
    phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:old.cprc,:old.suppcode,:old.itemcode,:old.cprc,:old.negodt,:old.validdt,:old.userid,SYSDATE);
    if (updating) then
    insert into phquotes_audit(cprc_new,suppcode,itemcode,cprc_old,negodt,validdt,userid,TRANDATE) values (:new.cprc,:new.suppcode,:new.itemcode,:new.cprc,:new.negodt,:new.validdt,:new.userid,SYSDATE);
    end if;
    gojko adzic
    http://gojko.net

  • Record is not inserting into the Table thourgh forms 10g

    Hi All,
    I have the form built in 10g(10.1.2.0.2).
    Basically the form has 2 blocks.
    Block 1 with only one item, where we enter some value and hit enter(this will navigate to block2 and execute the query).
    Block 2(tabular) will fetch the records. Now this block2 have 3 columns(caseid, userid, date).
    Now when I insert a new record, I just need to enter the caseid only. And userid and date have to be automatically populated.
    I can populate the USERID and DATE fields.
    And when I enter some value in caseid item of block 2, and then do Control+S(to insert the record and Save the transaction),
    i get the message saying FRM-40400: Transaction complete: 1 records applied and saved.
    But when I query again for the same, I dont se the record inserted into the table.
    Why is this happening?
    Help please...

    @ Inol
    There is no promary or foriegn key relation ship. The form is fetching records from just one table. As I said block1 has col1. and Block2 has col2,3,4.
    @Andreas
    Yes I did select * from table, select count(*) from table in SQL*Plus. Nothing is inserted.
    And one thing I have to tall here is, I have a ON-INSERT trigger in block2.
    The code in ON-INSERT trigger is
    --  :BLOCK2.DATE := TO_DATE(:DATE,'DD-MON-YYYY') ;
    /* commented since I was populating date by assigning $$DATETIME$$ to the Initial value property of the data item. */
    :BLOCK2.SOURCE_CASE := :BLOCK1.SOURCE_CASEID;Forgot to tell you,
    Since I was inserting the record from block2(3 columns), to the table which has 4 columns, there is another item in block 2 which has the visible property No.
    So the block 2 has 4 columns. And the hidden column will hold the value that is in the item of block1. This is what i'm pushing in the ON-INSERT trigger.
    Edited by: Charan on Sep 20, 2011 1:51 PM

  • Need to increase performance-bulk collect in cursor with limit and in the for loop inserting into the trigger table

    Hi all,
    I have a performance issue in the below code,where i am trying to insert the data from table_stg into target_tab and in parent_tab tables and then to child tables via cursor with bulk collect .the target_tab and parent_tab are huge tables and have a row wise trigger enabled on it .the trigger is mandatory . This timetaken for this block to execute is 5000 seconds.Now my requirement is to reduce it to 5 to 10 mins.
    can someone please guide me here.Its bit urgent .Awaiting for your response.
    declare
    vmax_Value NUMBER(5);
      vcnt number(10);
      id_val number(20);
      pc_id number(15);
      vtable_nm VARCHAR2(100);
      vstep_no  VARCHAR2(10);
      vsql_code VARCHAR2(10);
      vsql_errm varchar2(200);
      vtarget_starttime timestamp;
      limit_in number :=10000;
      idx           number(10);
              cursor stg_cursor is
             select
                   DESCRIPTION,
                   SORT_CODE,
                   ACCOUNT_NUMBER,
                     to_number(to_char(CORRESPONDENCE_DATE,'DD')) crr_day,
                     to_char(CORRESPONDENCE_DATE,'MONTH') crr_month,
                     to_number(substr(to_char(CORRESPONDENCE_DATE,'DD-MON-YYYY'),8,4)) crr_year,
                   PARTY_ID,
                   GUID,
                   PAPERLESS_REF_IND,
                   PRODUCT_TYPE,
                   PRODUCT_BRAND,
                   PRODUCT_HELD_ID,
                   NOTIFICATION_PREF,
                   UNREAD_CORRES_PERIOD,
                   EMAIL_ID,
                   MOBILE_NUMBER,
                   TITLE,
                   SURNAME,
                   POSTCODE,
                   EVENT_TYPE,
                   PRIORITY_IND,
                   SUBJECT,
                   EXT_PRD_ID_TX,
                   EXT_PRD_HLD_ID_TX,
                   EXT_SYS_ID,
                   EXT_PTY_ID_TX,
                   ACCOUNT_TYPE_CD,
                   COM_PFR_TYP_TX,
                   COM_PFR_OPT_TX,
                   COM_PFR_RSN_CD
             from  table_stg;
    type rec_type is table of stg_rec_type index by pls_integer;
    v_rt_all_cols rec_type;
    BEGIN
      vstep_no   := '0';
      vmax_value := 0;
      vtarget_starttime := systimestamp;
      id_val    := 0;
      pc_id     := 0;
      success_flag := 0;
              vstep_no  := '1';
              vtable_nm := 'before cursor';
        OPEN stg_cursor;
              vstep_no  := '2';
              vtable_nm := 'After cursor';
       LOOP
              vstep_no  := '3';
              vtable_nm := 'before fetch';
    --loop
        FETCH stg_cursor BULK COLLECT INTO v_rt_all_cols LIMIT limit_in;
                  vstep_no  := '4';
                  vtable_nm := 'after fetch';
    --EXIT WHEN v_rt_all_cols.COUNT = 0;
        EXIT WHEN stg_cursor%NOTFOUND;
    FOR i IN 1 .. v_rt_all_cols.COUNT
      LOOP
       dbms_output.put_line(upper(v_rt_all_cols(i).event_type));
        if (upper(v_rt_all_cols(i).event_type) = upper('System_enforced')) then
                  vstep_no  := '4.1';
                  vtable_nm := 'before seq sel';
              select PC_SEQ.nextval into pc_id from dual;
                  vstep_no  := '4.2';
                  vtable_nm := 'before insert corres';
              INSERT INTO target1_tab
                           (ID,
                            PARTY_ID,
                            PRODUCT_BRAND,
                            SORT_CODE,
                            ACCOUNT_NUMBER,
                            EXT_PRD_ID_TX,         
                            EXT_PRD_HLD_ID_TX,
                            EXT_SYS_ID,
                            EXT_PTY_ID_TX,
                            ACCOUNT_TYPE_CD,
                            COM_PFR_TYP_TX,
                            COM_PFR_OPT_TX,
                            COM_PFR_RSN_CD,
                            status)
             VALUES
                            (pc_id,
                             v_rt_all_cols(i).party_id,
                             decode(v_rt_all_cols(i).product_brand,'LTB',2,'HLX',1,'HAL',1,'BOS',3,'VER',4,0),
                             v_rt_all_cols(i).sort_code,
                             'XXXX'||substr(trim(v_rt_all_cols(i).ACCOUNT_NUMBER),length(trim(v_rt_all_cols(i).ACCOUNT_NUMBER))-3,4),
                             v_rt_all_cols(i).EXT_PRD_ID_TX,
                             v_rt_all_cols(i).EXT_PRD_HLD_ID_TX,
                             v_rt_all_cols(i).EXT_SYS_ID,
                             v_rt_all_cols(i).EXT_PTY_ID_TX,
                             v_rt_all_cols(i).ACCOUNT_TYPE_CD,
                             v_rt_all_cols(i).COM_PFR_TYP_TX,
                             v_rt_all_cols(i).COM_PFR_OPT_TX,
                             v_rt_all_cols(i).COM_PFR_RSN_CD,
                             NULL);
                  vstep_no  := '4.3';
                  vtable_nm := 'after insert corres';
        else
              select COM_SEQ.nextval into id_val from dual;
                  vstep_no  := '6';
                  vtable_nm := 'before insertcomm';
          if (upper(v_rt_all_cols(i).event_type) = upper('REMINDER')) then
                vstep_no  := '6.01';
                  vtable_nm := 'after if insertcomm';
              insert into parent_tab
                 (ID ,
                 CTEM_CODE,
                 CHA_CODE,            
                 CT_CODE,                           
                 CONTACT_POINT_ID,             
                 SOURCE,
                 RECEIVED_DATE,                             
                 SEND_DATE,
                 RETRY_COUNT)
              values
                 (id_val,
                  lower(v_rt_all_cols(i).event_type), 
                  decode(v_rt_all_cols(i).product_brand,'LTB',2,'HLX',1,'HAL',1,'BOS',3,'VER',4,0),
                  'Email',
                  v_rt_all_cols(i).email_id,
                  'IADAREMINDER',
                  systimestamp,
                  systimestamp,
                  0);  
         else
                vstep_no  := '6.02';
                  vtable_nm := 'after else insertcomm';
              insert into parent_tab
                 (ID ,
                 CTEM_CODE,
                 CHA_CODE,            
                 CT_CODE,                           
                 CONTACT_POINT_ID,             
                 SOURCE,
                 RECEIVED_DATE,                             
                 SEND_DATE,
                 RETRY_COUNT)
              values
                 (id_val,
                  lower(v_rt_all_cols(i).event_type), 
                  decode(v_rt_all_cols(i).product_brand,'LTB',2,'HLX',1,'HAL',1,'BOS',3,'VER',4,0),
                  'Email',
                  v_rt_all_cols(i).email_id,
                  'CORRESPONDENCE',
                  systimestamp,
                  systimestamp,
                  0); 
            END if; 
                  vstep_no  := '6.11';
                  vtable_nm := 'before chop';
             if (v_rt_all_cols(i).ACCOUNT_NUMBER is not null) then 
                      v_rt_all_cols(i).ACCOUNT_NUMBER := 'XXXX'||substr(trim(v_rt_all_cols(i).ACCOUNT_NUMBER),length(trim(v_rt_all_cols(i).ACCOUNT_NUMBER))-3,4);
              insert into child_tab
                 (COM_ID,                                            
                 KEY,                                                                                                                                            
                 VALUE)
              values
                (id_val,
                 'IB.Correspondence.AccountNumberMasked',
                 v_rt_all_cols(i).ACCOUNT_NUMBER);
             end if;
                  vstep_no  := '6.1';
                  vtable_nm := 'before stateday';
             if (v_rt_all_cols(i).crr_day is not null) then 
              insert into child_tab
                 (COM_ID,                                            
                 KEY,                                                                                                                                            
                 VALUE)
              values
                (id_val,
                 --'IB.Correspondence.Date.Day',
                 'IB.Crsp.Date.Day',
                 v_rt_all_cols(i).crr_day);
             end if;
                  vstep_no  := '6.2';
                  vtable_nm := 'before statemth';
             if (v_rt_all_cols(i).crr_month is not null) then 
              insert into child_tab
                 (COM_ID,                                            
                 KEY,                                                                                                                                            
                 VALUE)
              values
                (id_val,
                 --'IB.Correspondence.Date.Month',
                 'IB.Crsp.Date.Month',
                 v_rt_all_cols(i).crr_month);
             end if;
                  vstep_no  := '6.3';
                  vtable_nm := 'before stateyear';
             if (v_rt_all_cols(i).crr_year is not null) then 
              insert into child_tab
                 (COM_ID,                                            
                 KEY,                                                                                                                                            
                 VALUE)
              values
                (id_val,
                 --'IB.Correspondence.Date.Year',
                 'IB.Crsp.Date.Year',
                 v_rt_all_cols(i).crr_year);
             end if;
                  vstep_no  := '7';
                  vtable_nm := 'before type';
               if (v_rt_all_cols(i).product_type is not null) then
                  insert into child_tab
                     (COM_ID,                                            
                     KEY,                                                                                                                                        
                     VALUE)
                  values
                    (id_val,
                     'IB.Product.ProductName',
                   v_rt_all_cols(i).product_type);
                end if;
                  vstep_no  := '9';
                  vtable_nm := 'before title';         
              if (trim(v_rt_all_cols(i).title) is not null) then
              insert into child_tab
                 (COM_ID,                                            
                 KEY,                                                                                                                                            
                 VALUE )
              values
                (id_val,
                 'IB.Customer.Title',
                 trim(v_rt_all_cols(i).title));
              end if;
                  vstep_no  := '10';
                  vtable_nm := 'before surname';
              if (v_rt_all_cols(i).surname is not null) then
                insert into child_tab
                   (COM_ID,                                            
                   KEY,                                                                                                                                          
                   VALUE)
                values
                  (id_val,
                  'IB.Customer.LastName',
                  v_rt_all_cols(i).surname);
              end if;
                            vstep_no  := '12';
                            vtable_nm := 'before postcd';
              if (trim(v_rt_all_cols(i).POSTCODE) is not null) then
              insert into child_tab
                 (COM_ID,                                            
                 KEY,                                                                                                                                            
                 VALUE)                              
               values
                (id_val,
                 'IB.Customer.Addr.PostCodeMasked',
                  substr(replace(v_rt_all_cols(i).POSTCODE,' ',''),length(replace(v_rt_all_cols(i).POSTCODE,' ',''))-2,3));
              end if;
                            vstep_no  := '13';
                            vtable_nm := 'before subject';
              if (trim(v_rt_all_cols(i).SUBJECT) is not null) then
              insert into child_tab
                 (COM_ID,                                            
                 KEY,                                                                                                                                            
                 VALUE)                              
               values
                (id_val,
                 'IB.Correspondence.Subject',
                  v_rt_all_cols(i).subject);
              end if;
                            vstep_no  := '14';
                            vtable_nm := 'before inactivity';
              if (trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) is null or
                  trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) = '3' or
                  trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) = '6' or
                  trim(v_rt_all_cols(i).UNREAD_CORRES_PERIOD) = '9') then
              insert into child_tab
                 (COM_ID,                                            
                 KEY,                                                                                                                                            
                 VALUE)                              
               values
                (id_val,
                 'IB.Correspondence.Inactivity',
                  v_rt_all_cols(i).UNREAD_CORRES_PERIOD);
              end if;
                          vstep_no  := '14.1';
                          vtable_nm := 'after notfound';
        end if;
                          vstep_no  := '15';
                          vtable_nm := 'after notfound';
        END LOOP;
        end loop;
                          vstep_no  := '16';
                          vtable_nm := 'before closecur';
        CLOSE stg_cursor;
                          vstep_no  := '17';
                          vtable_nm := 'before commit';
        DELETE FROM table_stg;
      COMMIT;
                          vstep_no  := '18';
                          vtable_nm := 'after commit';
    EXCEPTION
    WHEN OTHERS THEN
      ROLLBACK;
      success_flag := 1;
      vsql_code := SQLCODE;
      vsql_errm := SUBSTR(sqlerrm,1,200);
      error_logging_pkg.inserterrorlog('samp',vsql_code,vsql_errm, vtable_nm,vstep_no);
      RAISE_APPLICATION_ERROR (-20011, 'samp '||vstep_no||' SQLERRM:'||SQLERRM);
    end;
    Thanks

    Its bit urgent
    NO - it is NOT urgent. Not to us.
    If you have an urgent problem you need to hire a consultant.
    I have a performance issue in the below code,
    Maybe you do and maybe you don't. How are we to really know? You haven't posted ANYTHING indicating that a performance issue exists. Please read the FAQ for how to post a tuning request and the info you need to provide. First and foremost you have to post SOMETHING that actually shows that a performance issue exists. Troubleshooting requires FACTS not just a subjective opinion.
    where i am trying to insert the data from table_stg into target_tab and in parent_tab tables and then to child tables via cursor with bulk collect .the target_tab and parent_tab are huge tables and have a row wise trigger enabled on it .the trigger is mandatory . This timetaken for this block to execute is 5000 seconds.Now my requirement is to reduce it to 5 to 10 mins.
    Personally I think 5000 seconds (about 1 hr 20 minutes) is very fast for processing 800 trillion rows of data into parent and child tables. Why do you think that is slow?
    Your code has several major flaws that need to be corrected before you can even determine what, if anything, needs to be tuned.
    This code has the EXIT statement at the beginning of the loop instead of at the end
        FETCH stg_cursor BULK COLLECT INTO v_rt_all_cols LIMIT limit_in;
                  vstep_no  := '4';
                  vtable_nm := 'after fetch';
    --EXIT WHEN v_rt_all_cols.COUNT = 0;
        EXIT WHEN stg_cursor%NOTFOUND;
    The correct place for the %NOTFOUND test when using BULK COLLECT is at the END of the loop; that is, the last statement in the loop.
    You can use a COUNT test at the start of the loop but ironically you have commented it out and have now done it wrong. Either move the NOTFOUND test to the end of the loop or remove it and uncomment the COUNT test.
    WHEN OTHERS THEN
      ROLLBACK;
    That basically says you don't even care what problem occurs or whether the problem is for a single record of your 10,000 in the collection. You pretty much just throw away any stack trace and substitute your own message.
    Your code also has NO exception handling for any of the individual steps or blocks of code.
    The code you posted also begs the question of why you are using NAME=VALUE pairs for child data rows? Why aren't you using a standard relational table for this data?
    As others have noted you are using slow-by-slow (row by row processing). Let's assume that PL/SQL, the bulk collect and row-by-row is actually necessary.
    Then you should be constructing the parent and child records into collections and then inserting them in BULK using FORALL.
    1. Create a collection for the new parent rows
    2. Create a collection for the new child rows
    3. For each set of LIMIT source row data
      a. empty the parent and child collections
      b. populate those collections with new parent/child data
      c. bulk insert the parent collection into the parent table
      d. bulk insert the child collection into the child table
    And unless you really want to either load EVERYTHING or abandon everything you should use bulk exception handling so that the clean data gets processed and only the dirty data gets rejected.

  • 2LIS_06_INV -  Records not getting into the setup table ..Please help..

    Hello Gurus,
    I am trying to setup 2lis_06_inv but i am not able to understand why i am not able to get any records in the setup table.The job shows finished in few seconds.
    What can be the possible reason for this?
    I activated the datasource using RSA5. I setup the Update Mode to 'Direct Delta' in LBWE ( Extraction Cockpit). I deleted the data in the setup table and then ran the OLI6BW tcode and gave tomorrow's date for finishing the job and then ran the job. The job shows finished in a few seconds but no data gets into the setup tables.
    Error message in log says:
    Recompilation has not selected anything -> Refer to error log
    Message no. MRBW015
    Diagnosis
    This error message was issued for one of the following reasons:
    No documents exist
    No selection criteria were entered
    BW updating has not been activated
    Any help is deeply appreciated.

    Hi,
    Check table RBEX on R/3 side whether any entries exists in that or not.
    if it does not contain any entry it will not bring any data.
    Check the link.
    2LIS_06_INV   Extractor problem
    Regards
    SH

  • Value not reflecting into the transparent table when checked through se11

    Hi friends.    i am using the following code to add data to a transparent table already creted by me.Now i am adding data to it through a ABAP program.It is displaying the output when I execute it but the new record added in the program is not saved itno the table actually.my code is :
    REPORT  ZWRITE_DATA.
    tables zlfa2.
    move 'achal' to zlfa2-field_name_1.
    update zlfa2.
    select * from zlfa2.
    write / zlfa2-field_name_1.
    endselect.
    the above code is not showing the value 'achal' in it.and also no error message is being displayed.

    Hi,
    Commit work saves the changes done into the database. Using COMMIT WORK statement in your program have below mentioned effect:
    Calls the subroutines specified by PERFORM ... ON COMMIT
    Executes asynchronously any update requests (see CALL FUNCTION ... IN UPDATE TASK) specified in these subroutines or started just before
    Processes the function modules specified in CALL FUNCTION ... IN BACKGROUND TASK
    Resets the time slice counter to 0.
    Ensures that the locks of the SAP locking concept are handled in accordance with its SCOPE Parameter.
    Executes a database commit on all database connections
    Closes all open database cursors (OPEN CURSOR) on all database connections
    Releases all database locks on all database connections
    KR Jaideep,

  • Writing a trigger to update the QOH in a Parts table for for each item of the order whenever the order is filled. The trigger is for the OrderItem table when an item record is inserted into the OrderItem table.

    Any ideas?

    Hi,
    If orderitem and parts are the only tables involved, and each orderitem references only 1 part, then it's pretty simple: just update parts, like this
    UPDATE  parts
    SET     qoh       = qoh - :NEW.quantity
    WHERE   part_num  = :NEW.part_num;
    If you can modify filled orderitems (e.g., DELETE orderitems or change the part_num after the order is filled, or change the status from filled back to unfilled then it's more complicated; you might have UPDATE the :OLD.part_num as well as the :NEW.part_num
    I hope this answers your question.
    If not, post your best attempt, along with a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
    Since you're asking about a DML statement, such as UPDATE, the sample data will be the contents of the table(s) before the DML, and the results will be state of the changed table(s) when everything is finished.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • Date is not inserted in the DB table

    Hi,
         I have a view, showing some data, including date and I have a save button. View has some of the fields update able. When I click the save button a bean function is called which run the query to update values in the DB table, taking those values from the view.
         Now the problem is, date is not updated as the query doesn't run just  because of the date and I am getting this error:
    ORA-01861: literal does not match format string
    and the date format is: 2013-09-23
    I have tried using to_date() method, but it didn't work for me.
    Here is my query:
                oracle.jbo.domain.Date  Pshipdate =( oracle.jbo.domain.Date) rowSelected.getAttribute("Pshipdate");
                    "UPDATE SHIPEXT" +
                    " SET APP = " +
                    "'" + status + "' " +
              ", PSHDAT = " + "to_date('" + Pshipdate + "', 'dd/mm/yyyy')"
                    +  ", MBY = " +
                    "'" + LoggedInUser + "'"
                    + ", IP = " +
                    "'" + IP + "'"
                    + ", DSREMS = " +
                    "'" + descrems + "'" +
                    ",  MDAT  = "
                    + "to_date('" + getCurrentTimeStamp() + "', 'dd/mm/yyyy')" +
                    " Where WO =" +
                    "' " + workorder + "'"
                    + "AND SR = " +
                    "'" + sr + "'"

    I'll repost what you branched off
    There's all kinds of things wrong.
    For a start, I can't see P_shipdate anywhere, though I can see Pshipdate.
    If you mean Pshipdate, Java is converting it to a string which you are then converting back to a date with to_date.
    Check that the default print  string returned is of dd/mm/yyyy format.
    Similarly with MDAT and getCurrentTimestamp - what is default print string of geCurrentTimestamp?
    All these problem could be avoided if you use bind variables.
    We are trying to help but you seem determined not to accept any help.
    Have you checked the print string formats of Pshipdate and getCurrentTimestamp?

  • Data is not loading into the target table in BODS

    BODS job is executing successfully but data is not loading.
    can anyone please let me know what is the problem
    Regards,
    Deva

    Hi Deva
    The Information provided is very limited, what are your Source and Target Databases?
    What is the structure of the job design?
    If the job completed without error, review the job logs to confirm that rows were indeed processed.
    Regards
    Charles

  • Popup not INSERTing into table and not refreshing called page ...

    Greetings
    Environment: APEX 3.1.1.00.09 on AIX 5.3 in 10gR2
    I have read many of the threads concerning my issue and I feel I am getting close to the answer but somehow have combined too many of the suggestions and am tripping over my own code.
    Please look at my sample application on apex.oracle.com:
    Workspace: galway
    User: gwicke
    Password: gwicke
    Please start with Page3, select any Agency and then click 'Add New Contract'.
    There is currently a <strong>BOLD </strong>label 'Add New Builder' that is a link that should open a popup window. Type any name into the field and click 'Create Builder'. This should INSERT the row into the builder table, close the popup, assign the new builder name to the calling page item 'Builder Name' and populate the screen item.
    In it's current state, the application will open the popup window, allow entry and close upon clicking the 'Create Builder' button. However the new builder is NOT inserted into the table and the calling page item is not populated.
    By looking at the Page Items and Session State I can see the correct values assigned to the 'Pn_BULDER_NAME' items on both the popup page (4) and the calling page (2) but the value does not appear on the screen.
    I've read where there's really two parallel universes, no sorry, two versions of the screen items, one in Session State and one that is displayed in the browser and there are steps to take to be sure the one displayed is updated from Session State as I would like in this case.
    I've entered Javascript code in the Page4 - header to define the 'passBack2()' function and code in the 'Optional URL Redirect' section of the 'Add Builder' button to hopefully execute the ARP for the INSERT, assign the Page2 items and close the popup. It doesn't quite get all that done.
    Any helpp is greatly appreciated. Thanks to Denes for most of the code suggestions I've followed.
    -gary

    Hi Gary,
    I think that there's a very simple solution to this - didn't really spot it last night.
    Firstly, yes, you could use a "button" to handle the call for the popup - just make sure that the button is a URL type "button" that is actually an A tag with the call in the URL target setting. Alternatively, you could take you existing A tag and use the same class attribute for one of your buttons as this should make it look like a button.
    More importantly, though, I think that we could do it as:
    1 - On your page 2 popup call, clear that cache for page 4 (the popup page) - I have already done this in your app by updating the url
    2 - On the popup page, allow the user to enter in their desired P4_BUILDER_NAME value (not sure if you want to do something to make this unique?)
    3 - Let the user click the Create button on the popup. This will submit the page, which will get your P4_BUILDER_RANK (the pk) value and insert a new record into the table (you could consider creating a sequence and a trigger to handle the creation of a new PK value?).
    4 - Assuming the P4_BUILDER_RANK then exists (it wouldn't if there was an error somewhere), then conditionally display a region that had a piece of javascript that submits page 2 and then closes itself - we don't need to pass anything back to page 2 (see below)
    5 - As the P4_BUILDER_NAME and P4_BUILDER_RANK exist in the session, when page 2 is being reloaded, (A) the select list would be updated with the new Builder (still not sure why all my entries appeared at the bottom instead of in alpha order??) and (B) both P2_BUILDER_NAME and P2_BUILDER_RANK can have Post Calculation Computations set (NVL(:P4_BUILDER_NAME,:P2_BUILDER_NAME) and NVL(:P4_BUILDER_RANK, :P2_BUILDER_RANK) respectively) - the effect of this is, if there are values stored in the P4 page items, we use them, otherwise we use whatever values were in the P2 page items
    6 - Finally, to stop (5) happening in all page 2 loads, you would need to clear the cache for page 4 in as many places as possible - eg, branches to page 2 or buttons on page 2
    The reason we can't pass values back to page 2 is that one of the items is a select list. The value we want to select won't appear on the select list until the page has been submitted. So, we can't set the value and submit because the value isn't there. We can't submit and set the value because javascript wouldn't know when the page has been updated (or, at least, you would have to put some independant mechanism in place to identify this, which may become complicated).
    So, simply put, as long as we know that if the values are in the session, we can use Post Calculation Computations to set our fields to these values. The only thing to bear in mind is that we need to ensure that these session values only exist when we need them - hence clearing the cache. This principle should work for any type of field - but, as you have no doubt seen, simple text fields can be updated by the popup directly as the field should accept any value we give it.
    My only other recommendation would be to completely remove the MRU processes from the page as these are not required (they just confuse the issue) and you could make your PK fetch and record insert into a single process - just to keep things neat and tidy, you understand!
    When I finished with your app last night, I did leave it so that javascript would create a new option on the select list and then set the value. But the above methodology seems to be a lot simpler.
    Andy

  • Issue with INSERT INTO, throws primary key violation error even if the target table is empty

    Hi,
    I am running a simple
    INSERT INTO Table 1 (column 1, column 2, ....., column n)
    SELECT column 1, column 2, ....., column n FROM Table 2
    Table 1 and Table 2 have same definition(schema).
    Table 1 is empty and Table 2 has all the data. Column 1 is primary key and there is NO identity column.
    This statement still throws Primary key violation error. Am clueless about this? 
    How can this happen when the target table is totally empty? 
    Chintu

    Nope thats not true
    Either you're not inserting to the right table or in the background some other trigger code is getting fired which is inserting into some table which causes a PK violation. 
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Records are not inserted into MTL_TXN_REQUEST_HEADERS,MTL_TXN_REQUEST_LINES

    Hi all,
    I am doing pick release thru API.
    For that , I have run following API successfully but my problem is that records are not inserted into MTL_TXN_REQUEST_HEADERS , MTL_TXN_REQUEST_LINES
    tables so that I cannot generate the move order. Can anyone suggent the valuable tips for that ?
    1. WSH_DELIVERIES_PUB.create_update_delivery
    2. WSH_DELIVERY_DETAILS_PUB.Detail_to_Delivery
    3. WSH_PICKING_BATCHES_PUB.CREATE_BATCH
    4. WSH_PICKING_BATCHES_PUB.RELEASE_BATCH
    5. WSH_DELIVERIES_PUB.Delivery_Action ( for p_action_code = 'PICK-RELEASE' )
    regards with thanks in advance
    sanjay

    Hi All,
    To create a Move Order Header & Line Record in MTL_TXN_REQUEST_HEADERS and MTL_TXN_REQUEST_LINES tables , I have run an seeded
    procedure : CreateMoveOrderHeader & CreateMoveOrderLines .
    The procedure : CreateMoveOrderHeader was run successfully but when I am going to run procedure : CreateMoveOrderLines , it is giving
    an error .
    Following Error text I am receiving at the time of running of procedure : CreateMoveOrderLines .
    Initialized applications context: 5707 50138 660
    *==========================================================*
    Calling INV_MOVE_ORDER_PUB.Create_Move_Order_Lines API
    *==========================================================*
    Return Status: E
    Error Message :INV
    *==========================================================*
    From the above error message, no specific error is received . Only " Error Message : INV " is received hence it is very difficult to judge & resolve an error .
    Can anyone guide me that what is an error ? For what reason I am getting an error ?
    regrads
    Sanjay

  • XSQL Insert into Schema based Table

    Hi,
    I am struggling with this one:
    My test XML is well formed:
    <?xml version="1.0"?>
    <SC_ESP>
    <ResultSet>
         <ApplicationID>App0001</ApplicationID>
         <Reason>Sucess</Reason>
    </ResultSet>
    </SC_ESP>
    Whan I try to POST this XML data via the XSQL Servlet
    I get the following error:
    "Character '$' is not allowed in a XML tag name."
    Anyone (Mark ?) know what it means ?
    Thanks
    Martin

    Hello Mark,
    I don't know which time zone you are in but thanks for the very prompt replies.
    All I am trying to with this test is provide an XML input test facility via HTTP. The users are supposed to paste the XML into a TextAre using their browser and have that data inserted into the corresponding Table(s) via the XSQL servlet.
    The XML schema have already been registered but I note from your other reply that I have not added the annotation xdb:storeVarrayAsTable="true" to the schema tags.
    It is worth noting that the whole thing works if I create a simple table that is NOT related to an XML Shema.
    You say that you have not had to use the XSQl Servlet. Would you care to say what approach you would use for the above requirement. Shall I set about writing my own Servlet to do this.

Maybe you are looking for